check-dbstmts was just running the normal pytest, AFAICT:
```
export TEST_CHECK_DBSTMTS=0
+ TEST_CHECK_DBSTMTS=0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd does this internally now using ccan/io, with appropriate
credit for ZmnSCPxj who wrote this code in the first place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
OK, now this test makes more sense! Now we don't ignore errors, we
*will* drop to chain if we reconnect after one side has dropped to
chain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was put in late 2019, and @t-bast says Eclair doesn't ignore their
errors and has had no issues.
It also conflicts with https://github.com/lightning/bolts/pull/932
which suggests you *should* fail when you receive an error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems to trigger now, especially on PostgresQL (maybe it's faster
to process blocks?).
e.g. test_closing_simple() hangs in close(), because the close is unilateral
because the HTLC timed out, so it's waiting for a block (other lines removed):
```
lightningd-1: 2022-01-12T00:33:46.258Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_COMMITMENT_SIGNED
lightningd-1: 2022-01-12T00:33:46.278Z DEBUG lightningd: close_command: timeout = 172800
2022-01-12T01:03:36.9757201Z lightningd-2: 2022-01-12T00:33:46.384Z DEBUG lightningd: Adding block 104: 73ffa19d27d048613b2731e1682b4efff0dc226807d8cc99d724523c2ea58204
2022-01-12T01:03:36.9759053Z lightningd-2: 2022-01-12T00:33:46.396Z DEBUG lightningd: Adding block 105: 44fd06ed053a0d0594abcfefcfa69089351fc89080826799fb4b278a68fe5c20
2022-01-12T01:03:36.9760865Z lightningd-2: 2022-01-12T00:33:46.406Z DEBUG lightningd: Adding block 106: 0fee2dcbd1376249832642079131275e195bba4fb49cc9968df3a899010bba0f
2022-01-12T01:03:36.9762632Z lightningd-2: 2022-01-12T00:33:46.418Z DEBUG lightningd: Adding block 107: 7f24f2d7d3e83fe3256298bd661e57cdf92b058440738fd4d7e1c8ef4a4ca073
2022-01-12T01:03:36.9773411Z lightningd-2: 2022-01-12T00:33:46.429Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#1: peer_in WIRE_REVOKE_AND_ACK
2022-01-12T01:03:36.9794707Z lightningd-2: 2022-01-12T00:33:46.437Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#1: Commits outstanding after recv revoke_and_ack
2022-01-12T01:03:36.9788197Z lightningd-2: 2022-01-12T00:33:46.433Z DEBUG lightningd: Adding block 108: 283b371fb5d1ef42980ea10ab9f5965a179af8e91ddf31c8176e79820e1ec54d
2022-01-12T01:03:36.9799347Z lightningd-2: 2022-01-12T00:33:46.439Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#1: HTLC 0[REMOTE] => RCVD_REMOVE_REVOCATION
2022-01-12T01:03:36.9808057Z lightningd-2: 2022-01-12T00:33:46.447Z UNUSUAL 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: Peer permanent failure in CHANNELD_NORMAL: Fulfilled HTLC 0 RCVD_REMOVE_REVOCATION cltv 109 hit deadline
```
This is because `pay` returns from l1 when it has the preimage, not
when the HTLC is fully resolved. Add a helper for this, and call it
at the end of the pay test helper. We might need this elsewhere
though!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's actually a bug in our closing tx size estimation; I'll do
a separate patch for this, though.
Seems this used to be flaky, now we always flush queues, so it's
more reliably caught.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to shut down peers atomically, but now we flush the
connections there's a delay. If we are asked to connect in that time,
we ignore it, as we are already connected, but that's wrong: we need
to remember that we were told to connect and reconnect.
This should solve a few weird test failures where "connect" would hang
indefinitely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We seem to hit a race between manual reconnect (with address hint) and an automatic
reconnection attempt which fails:
```
> l4.rpc.connect(l3.info['id'], 'localhost', l3.port)
...
E pyln.client.lightning.RpcError: RPC call failed: method: connect, payload: {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'host': 'localhost', 'port': 41285}, error: {'code': 401, 'message': 'All addresses failed: 127.0.0.1:36678: Connection establishment: Connection refused. '}
```
See how it didn't even try the given address?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In the case where the peer sends an error (and hangs up) immediately
after init, connectd *doesn't actually read the error* (even after all the
previous fixes so it actually receives the error!).
This is because to tried to first write WIRE_CHANNEL_REESTABLISH, and
that fails, so it never tries to read. Generally, we should ignore
write failures; we'll find out if the socket is closed when we read
nothing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
l1 might split in a commitment_signed before it notices the disconnect, and this test fails:
```
for i in range(0, len(disconnects)):
with pytest.raises(RpcError):
l1.rpc.sendpay(route, rhash, payment_secret=inv['payment_secret'])
> l1.rpc.waitsendpay(rhash)
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is critical in the common case where peer sends an error and
hangs up: we almost never get to relay the error to the subd in time.
This also applies in the other direction: we need to flush the queue
to the peer when the subd closes. Note we only free the actual peer
struct when lightningd reaps us with connectd_peer_disconnected().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would lose packets sometimes due to this previously, but it
doesn't happen over localhost so our tests didn't notice. However,
now we have connectd being sole thing talking to peers, we can do
a more elegant shutdown, which should fix closing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: Always flush sockets to increase chance that final message get to peer (esp. error packets).
msg_queue was originally designed for inter-daemon comms, and so it has
a special mechanism to mark that we're trying to send an fd. Unfortunately,
a peer could also send such a message, confusing us!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dev_blackhole_fd was a hack, and doesn't work well now we are async
(it worked for sync comms in per-peer daemons, but now we could sneak
through a read before we get to the next write).
So, make explicit flags and use them. This is much easier now we
have all peer comms in one place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's weird to have connectd ask gossipd, when lightningd can just do it
and hand all the addresses together.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually intercept the gossip_timestamp_filter, so the gossip_store
mechanism inside the per-peer daemon never kicks off for normal connections.
The gossipwith tool doesn't set OPT_GOSSIP_QUERIES, so it gets both, but
that only effects one place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
channeld can't do it any more: it's using local sockets. Connectd
can do it, and simply does it by type.
Amazingly, on my machine the timing change *always* caused
test_channel_receivable() to fail, due to a latent race.
Includes feedback from @cdecker.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As connectd handles more packets itself, or diverts them to/from gossipd,
it's the only place we can implement the dev_disconnect logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now connectd is doing the crypto, we can use normal wire io. We
create helper functions to clearly differentiate between "peer" comms
and intra-daemon comms though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We temporarily hack to sync_crypto_write/sync_crypto_read functions to
not do any crypto, and do it all in connectd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of passing the incoming socket to lightningd for the
subdaemon, create a new one and simply shuffle data between them,
keeping connectd in the loop.
For the moment, we don't decrypt at all, just shuffle. This means our
buffer code is kind of a hack, but that goes away once we start
actually decrypting and understanding message boundaries.
This implementation is naive: it closes the socket to the local daemon
as soon as the peer closes the socket to us. This is fixed in a
successive patch series (along with many other similar issues).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This test started mostly failing (in non-DEVELOPER mode) after the
next patch, due to timing issues.
Handle both cases for now, and we'll add more enhancements later to
things we should be handling more consistently.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd will be keeping the conn open, so it needs to free this
"conn_timeout" timer. Pass it through, so we can do that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Procedure redefinition is a very cool feature but when other libraries redefine the same function can be very tricky to avoid compilation error.
This PR proposed a change of logic and use a customizzation function definition to read from the stdin, so we can avoid future error at compile time.
However, we could be check also the os or compiler that cause the error and redefine the missing function.
Changelog-None: Fixed compilation error due redefinition procedure.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
I also got an error under CI; it seems the sleep() was insufficient.
So try adding a sleep inside the check_coin_moves, which should cover
everyone.
```
acct_moves = acct_moves[number_moves:]
else:
> if not move_matches(m, acct_moves[0]):
E IndexError: list index out of range
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. tal_strndup(.., str, strlen(str)) == tal_strdup()
2. tal_strdup also takes(), so document that.
3. Avoid passing 'struct sha256' on the stack: use ptr.
4. Generally, structures shouldn't keep pointers to things they don't own.
In this case, mvt->node_id.
5. Make payment_hash a pointer, since NULL is more natural than an all-zero
hash.
And add NON_NULL_ARGS() to the functions; it's cumbersome, but make it
fairly clear what params are optional.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
