We would fail even if a process exited cleanly after having the line we
were looking for, because we checked if it died before reading the logs.
Co-Authored-by: Daniela Brozzoni <daniela@revault.dev>
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
It sometimes fails because the two race, and sometimes because there's
randomness, but it generally works (and doesn't fail systemically).
We remove this before the final merge.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It sometimes fails because the two race, and sometimes because there's
randomness, but it generally works (and doesn't fail systemically).
We remove this before the final merge.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It sometimes fails because the two race, and sometimes because there's
randomness, but it generally works (and doesn't fail systemically).
We remove this before the final merge.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This test takes 695 seconds, because fundwallet waits for the wallet to
notice the tx, which takes 60 seconds if not DEVELOPER. Do all the waiting
at once, and this speeds the test up to 153 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds our first (basic) schema, and sews support into pyln-testing
so it will load schemas for any method for doc/schemas/{method}.schema.json.
All JSON responses in a test run are checked against the schema (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not an API break: reserve=true|false still works for fundpsbt and utxopsbt,
but we also allow a raw number in there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tests that will only run when !EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v1')
def test_...()
Tests that will only run when EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v2')
def test_...()
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We will eventually start emitting and dispatching custom notifications
from plugins just like we dispatch internal notifications. In order to
get reasonable error messages we need to make sure that the topics
plugins are asking for were correctly registered. When doing this we
don't really care about whether the plugin that registered the
notification is still alive or not (it might have died, but
subscribers should stay up and running), so we keep a list of all
topics attached to the `struct plugins` which gathers global plugin
information.
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
e.g. in test_closing_id we can get a spend from the first (closed) channel
in the same block as the open of the second. Half the time, we'll choose
the wrong one as scid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This centralizes the setup.py file, and parametrizes it so it can
auto-detect which bolt we are building. It also uses trick 3 from [1]
to avoid importing the package itself during the manifest creation,
which'd cause an import error due to missing dependencies.
[1] https://packaging.python.org/guides/single-sourcing-package-version/
This would lead to errors about missing dependencies when attempting
to install using `pyhon setup.py install`. This is because the
`setup.py` file effectively is the manifest file used to discover
which dependencies are needed, so when using it to detect dependencies
we obviously don't have them yet.
See https://packaging.python.org/guides/single-sourcing-package-version/
We weren't writing out the length of a nested subtype's
dynamicarraylenght, now we do. The trick is to iterate through the
fields on a subtype (since the length field is added separately)
and to also iterate down through the otherfield values as we 'descend'
We scan config.vars to figure out if you configured developer on or off.
If it's on, we add the dev-only options to the config.
Fixes: #4400
Reported-By: Jonathan Harvey-Buschel @jharveyb
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The semantics don't change, since `lightningd` will use false as
default as well, however setting it to something other than `None`
causes the RPC library to include the parameter in the query, and
since the parameter was introduced only in 0.9.3 and pyln may be used
with older versions this then results in an error about an unknown
parameter.
Setting this to `None` makes sure pyln filters out the argument before
calling.
Changelog-Fixed: pyln: Fixed an error when calling `listfunds` with an older c-lightning version causing an error about an unknown `spent` parameter
I had way too much fun with this and got a bit carried away with the
letter writing. The idea is to be helpful when users start the plugin
from the command line, rather than run it under the control of
lightningd. We also print detailed information about the user-visible
things such as the methods and options exposed by the plugin.
Changelog-Added: pyln: Plugins that are run from the command line print helpful information on how to configure c-lightning to include them and print metadata about what RPC methods and options are exposed.
Suggested-by: Rusty Russell <@rustyrussell>
In the case where you want a PSBT and also want the output to be added
as a change address, use `excess_as_change` = true.
Generates a change address to use. If you want to pay the excess
elsewhere, you will have to add separately.
Changelog-Added: JSON-RPC: Add new parameter `excess_as_change` to fundpsbt+utxopsbt
Since we turned many errors into warnings, we want our tests to fail
when they happen unexpectedly. We make WARNING clear in the strings
we print, too, to help out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This 'fixes' the `wait_for` helper by removing a pointless final
`time.sleep()`, thus potentially making the method return quicker.
The old code could have had three final states:
- success() := True
- Timeout and success() := True
- Timeout and success() := False
The new code has just two final state:
- success() := True
- Timeout and success() := False
It ensures the final `time.sleep()` is just the right amount before timeout.
And more importantly making it more readable :-)
Changelog-None
We are printing `repr(obj)` which is not pretty-printed, hard to read,
and can't even be copied and inspected to JSON tools. We now print the
JSONified and indented calls and responses for easier debugging based
on solely the logs (useful for CI!).
Changelog-Added: pyln-testing: The RPC client will now pretty-print requests and responses to facilitate log-based debugging.
We were getting a couple of starvations, so we need a fair filelock. I
also wasn't too happy with the lock as is, so I hand-coded it quickly.
Should be correct, but the overall timeout will tell us how well we
are doing on CI.
We were getting a number of incompatibility warning due to the
dependencies being expressed too rigidly. This losens the requirement
definitions to being compatible with a known good version, and while
we're at it we also bump all outdated requirements.
we got rid of push_msats for dual funded channels. this assumes that hte
peer will match an equal amount of sats as ours (the df_accepter.py
plugin will do this)
This is required if we want to create a "bouncer" plugin (in my copious free time!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now takes an optional `cltv` parameter.
3.0.12 here:
```
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: note: See https://mypy.readthedocs.io/en/latest/running_mypy.html#missing-imports
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A fractional satoshi value isn't really useful; rounding up loses
precision but that's why you called "whole satoshi", wasn't it?
Changelog-Changed: pyln-client: Millisatoshi has new method, `to_whole_satoshi`; *rounds value up* to the nearest whole satoshi
We need to use it for the 'df_accepter' plugin, so we get the feerate
correct.
Changelog-Added: pyln-client: `fundpsbt`/`utxopsbt` now support `min_witness_weight` param
This was causing the following error
```
Exception in thread Thread-553:
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 916, in _bootstrap_inner
self.run()
File "/usr/lib/python3.6/threading.py", line 864, in run
self._target(*self._args, **self._kwargs)
File "/tmp/cirrus-ci-build/contrib/pyln-testing/pyln/testing/utils.py", line 232, in tail
self.err_logs.append(line.rstrip().decode('UTF-8', 'replace')).rstrip()
AttributeError: 'NoneType' object has no attribute 'rstrip'
[gw5] [ 33%] FAILED tests/test_misc.py::test_bitcoin_failure
```
Notice the second call to `.rstrip()` on the return value of `.append()`
Both my machine and apparently the CI tester machines regularly run
into issues with load on the system, causing timeouts (and
unresponsiveness). The throttler throttles the speed with which new
instances of c-lightning get started to avoid overloading. Since the
plugin used for parallelism when testing spawns multiple processes we
need to lock on the fs. Since we have that file open already, we'll
also write a couple of performance metics to it.
We sometimes have very specific sequences of tx broadcasts and blocks
being generated to confirm them. If the confirmation is missed the
test can completely get out of sync. Make debugging this easier by
logging what we confirmed.
Allows caller to set code and exact message to be returned.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: pyln-client: plugins can now raise RpcException for finer control over error returns.
"multi" means that specifying a parameter twice will append, not override.
Multi args are always given as a JSON array, even if only one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: new "multi" field allows an option to be specified multiple times.
This only adds a test that currently makes sure its not possible
to init a Millisatoshi by a floating number.
Discussion:
As @gallizoltan points out, initialization with a float should be possible:
https://github.com/ElementsProject/lightning/pull/4273#discussion_r540369093
> Millisatoshi(5) / 2 currently works, and removes the half msat.
> So, I think Millisatoshi(5 / 2) should be the same.
Before this patch this fails: `Millisatoshi(42) / Millisatoshi(2)`
This is an operation that should return the ratio between the two
operands as a float number. Same goes for __floordiv__ operator `//`.
Changelog-None
We promised to deprecate the old "destination satoshi feerate utxos"
variant some time on mid-2020 so let's do just that. `txprepare`
doesn't parse it either anymore.
Changelog-Changed: pyln: `txprepare` no longer supports the deprecated `destination satoshi feerate utxos` call format.
Logs may contain non-ASCII and non-UTF8 symbols, which crashes the
tailer. It's better to replace them with a glyph representing
undecodeable symbols instead, and handle the issue further up the
call-chain.
We rely on it when logging, but didn't set it in the class, rather we
did in the sub-classes. This proved to be rather annoying to search
since it'd just fail silently and not log any output.
This will change the current hardwired PostgreSQL binary lookup mechanism to
utilizing the `pg_config --bindir` utility that should work better for most
distributions. The old method caused issues at least on Archlinux.
Changelog-None
We also sanity check that response id matches our request.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: pyln: pyln.client handles and can send progress notifications.
- Adds bitarray filling so mesages of any length can be encoded, instead of forcing the encoding to be of messages with length multiple of 5.
- Adds checks for encoding / decoding and raises expections if the inputs are not as expected.
- Flags functions that are supposed to be internal as "private".
My bad, i comitted them as part of the LSAN suppressions while this data
race could have and had been fixed.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
`openchannel_signed` and `openchannel_update` which allow a user to
continue a openchannel or kick off the completion of a openchannel.
`openchannel_update` should be called until it returns with
`commitments_secured`.
Finally, extends the 'close_to' functionality up to the flagship 'open a
channel' command.
Changelog-Added: JSON-API `fundchannel` now accepts an optional 'close_to' param, a bitcoin address that the channel funding should be sent to on close. Requires `opt_upfront_shutdownscript`
We had a couple of instances where a plugin would be killed by `lightningd`
because we were returning a result of an exception twice, and it was hard to
trace down the logic error in the user plugin that caused that. This patch
adds a traceback the first time we return a result/exception, and raise an
exception with a stacktrace of the first termination when a second one comes
in.
This can still terminate the plugin, but the programmer gets a clear
indication where the result was set, and can potentially even recover from it.
Changelog-Added: pyln: Plugin method and hook requests prevent the plugin developer from accidentally setting the result multiple times, and will raise an exception detailing where the result was first set.
It is often pretty usefuk to use the builtin logging module to debug things,
including libraries that a plugin may use. This adds a simple
`PluginLogHandler` that maps the python logging levels to the `lightningd`
logging levels, and formats the record in a way that it doesn't clutter up the
`lightningd` logs (no duplicate timestamps and levels).
This allow us to tweak the log level that is reported to `lightningd` simply
using the following
```python3
import logging
logging.basicConfig(level=logging.DEBUG)
```
Notice that in order for the logs to be displayed on the terminal or the
logfile, both the logging level in the plugin _and_ the `--log-level`
`lightningd` is running need to be adjusted (the python logging level only
controls which messages get forwarded to `lightningd`, it does not have the
power to overrule `lightningd` about what to actually display).
I chose `logging.INFO` as the default, since libraries have a tendency to spew
out everything in `logging.DEBUG` mode
Changelog-Added: pyln: Plugins have been integrated with the `logging` module for easier debugging and error reporting.
Since we start a new instance of postgres for each test we may end up swamped
and the startup can take a bit longer. So let's loop until we get a success.
It was really flaky, especially under `test_mpp_interference_2`, most likely
due to multiple calls to `fund_channel`. This commit looks for the specific
txids in the `listfunds` output and the `getrawmempool` output, avoiding
strange artifacts from multiple calls.
For performance reasons we were starting one for each session, which caused
the same postgres DB to be re-used for multiple tests (all test run in the
same worker process), but this could lead to interactions if there is a
timeout or a test happens to touch the `db_provider`. It turns out that we
were only saving about 15 seconds on a 1250 second run anyway, which is a
small cost for increased test isolation.
We were not removing the base test directory if we had other files in there,
which was the case for postgres runs. This now explicitly check for `test_*`
directories which are an indicator of a failed test.
We had a couple of issues with workers dying and attempting to re-initialize
the database while it was already initialized. This will look for a free
directory and just start the DB in there, allowing workers to be better
isolated.
Several times we had issues with plugins not being able to re-encode an RPC
result because they forgot to use the custom encoder class. This allows us to
patch the JSONEncoder when we start the RPC or the plugin and automagically
support classes that provide a `to_json` method.
The next patch perturbed things enough that we suddenly started
getting (with --track-origins=yes):
Valgrind error file: valgrind-errors.120470
==120470== Use of uninitialised value of size 8
==120470== at 0x14EBD5: htable_val (htable.c:150)
==120470== by 0x14EC3C: htable_firstval_ (htable.c:165)
==120470== by 0x14F583: htable_del_ (htable.c:349)
==120470== by 0x11825D: pointer_referenced (memleak.c:65)
==120470== by 0x118485: scan_for_pointers (memleak.c:121)
==120470== by 0x118500: memleak_remove_region (memleak.c:130)
==120470== by 0x118A30: call_memleak_helpers (memleak.c:257)
==120470== by 0x118A8B: call_memleak_helpers (memleak.c:262)
==120470== by 0x118A8B: call_memleak_helpers (memleak.c:262)
==120470== by 0x118B25: memleak_find_allocations (memleak.c:278)
==120470== by 0x10EB12: closing_dev_memleak (closingd.c:584)
==120470== by 0x10F3E2: main (closingd.c:783)
==120470== Uninitialised value was created by a heap allocation
==120470== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==120470== by 0x1604E8: allocate (tal.c:250)
==120470== by 0x160AA9: tal_alloc_ (tal.c:428)
==120470== by 0x119BE0: new_per_peer_state (per_peer_state.c:24)
==120470== by 0x11A101: fromwire_per_peer_state (per_peer_state.c:95)
==120470== by 0x10FB7C: fromwire_closingd_init (closingd_wiregen.c:103)
==120470== by 0x10ED15: main (closingd.c:626)
==120470==
This is because there is uninitialized padding at the end of struct
peer_state.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently ``LightningConnection.remote_pubkey`` is set to ``None`` if the node is not the handshake initiator. This sets it to ``rs`` in act three from the receiver side
Since pyln-bolt* specify the 0.8.4 version which we didn't upload, and the
requirements.txt specify ==0.8.4, we need to backfill that version, even if we
could just bump it directly to 0.9.1.
Hooks do not tolerate failures at all. If we return a JSON-RPC error to a hook
call the only thing the main daemon can really do is to crash. This commit
adds a mapping of error to a safe fallback result, including a warning to the
node operator that this should be addressed in the plugin. The warning is
reported as a `**BROKEN**` message, and should therefore fail any testing done
on the plugin.
Changelog-Fixed: pyln: Fixed HTLCs hanging indefinitely if the hook function raises an exception. A safe fallback result is now returned instead.
Fixes: #2679
Changelog-Added: JSON-RPC: New `multiwithdraw` command to batch multiple onchain sends in a single transaction. Note it shuffles inputs and outputs, does not use BIP69.
Re-write start_ln such that we can create up to 10 nodes locally for
testing. Useful for scenarios where more than two nodes are needed
Changelog-Changed: contrib: startup_regtest.sh `startup_ln` now takes a number of nodes to create as a parameter
This is an extra safety check for dual funding, where we only want to sign
the inputs we provided!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `signpsbt` takes an optional `signonly` array to limit what inputs to sign.
Required for dual funding where the opener sets it.
Changelog-Added: JSON-RPC: `fundpsbt` takes a new `locktime` parameter
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows plugins to choose how to present things in getmanifest.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: `getmanifest` may now include "allow-deprecated-apis" boolean flag.
Changelog-Deprecated: plugins: `getmanifest` without any parameters; plugins should accept any parameters for future use.
And when it's set, and we're SLOW_MACHINE, simply disable valgrind.
Since Travis (SLOW_MACHINE=1) only does VALGRIND=1 DEVELOPER=1 tests,
and VALGRIND=0 DEVELOPER=0 tests, it was missing tests which needed
DEVELOPER and !VALGRIND.
Instead, this demotes them to non-valgrind tests for SLOW_MACHINEs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can query all the txids at once, rather than one at a time.
Doesn't make any measurable difference to full runtime testing here
though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We might have funds prior to calling join_nodes(), so testing that
we've all seen the block is better.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what fund_channel() does, which is more thorough than what
we were doing. But since the order of the logs is undefined, we need
to be a little careful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reduces VALGRIND=1 node_factory.line_graph(5) time on my laptop from 42s to 36s.
This is simply because forking all the subdaemons just to check the
version is very expensive under valgrind.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
fundpsbt forces the caller to manually add their weight * feerate
to the satoshis they ask for. That means no named feerates.
Instead, create a startweight parameter and do the calc for them
internally, and return the feerate we used (and, while we're at it,
the estimated final weight).
This API change is best done now, as it would otherwise have to
be appended as a parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new call `signpsbt` which will add the wallet's signatures to a provided psbt
Changelog-Added: JSON-RPC: new call `sendpsbt` which will finalize and send a signed PSBT
Reserve and unreserve wallet UTXOs using a PSBT which includes those
inputs.
Note that currently we unreserve inputs everytime the node restarts.
This will be addressed in a future commit.
Changelog-Added: JSON-RPC: Adds two new rpc methods, `reserveinputs` and `unreserveinputs`, which allow for reserving or unreserving wallet UTXOs
Now they look like 1.0.1.137, so you can explicitly depend on a csv change
(without caring about a textual change).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. version was 0.0.2 in setup.py, which means we didn't get the dist/ files we expected.
2. We need 'bdist_wheel' to make the .whl file.
3. --no-site-packaged was apparently removed in 0.20.0, and was default long before that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes some real bugfixes, since it noticed some places we were
being loose with different types!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're almost entirely autogenerated, and we use symlinks into the
top directory to reduce replication.
They can't be under pyln.spec.message, because a package can't also
be a namespace.
We also add fulltext and desc fields, and exclude our "gen" files from
flake8, since the spec quotes contain weird whitespace.
Changelog-Added: Python: pyln.spec.bolt{1,2,4,7} packages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Remove non-existant pyln.proto.bolts. bolts will have separate setup.py, so we
can rev the versions individually.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This delivers the message contents in a much friendlier form for
manipulation: in particular, it makes it easy to compare two
messages without having to know all the message type internals.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If they don't exist, that's OK. These will eventually be going away
from the spec, but there are still some in gossip messages for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Exposing the array types is required for our dummyrunner in the lnprototest suite, since
it wants to be able to generate fake fields.
The set_field is similarly useful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Other changes along the way:
1. In a couple of places we passed None as a dummy for for
`otherfields` where {} is just as good.
2. Turned bytes into hex for errors.
3. Remove nonsensical (unused) get_tlv_by_number() function from MessageNamespace
4. Renamed unrelated-but-overlapping `field_from_csv` and
`type_from_csv` static methods, since mypy thought they should have
the same type.
5. Unknown tlv fields are placed in dict as strings, not ints, for
type simplicity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are autogenerated, but now they export their own
MessageNamespace, as well as the raw csv.
They also expose their SubtypeTypes, MessageTypes and TlvStreamTypes,
though in theory these could clash (they don't for now, and it'd be
kinda awkward if they did).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This contains the CSVs for the current bolts (autogenerated). It's a
separate module because I expect it to be updated alongside the spec.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: pyln: new module pyln.proto.message.bolts
This will be useful for the next patch, which introduces per-bolt
modules. This makes it easier for them generate variables for each
field type they parse (they don't want to export u16, for example)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of val_to_bin/val_from_bin which deal with bytes, we implement
read and write which use streams. This simplifies the API.
Suggested-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This supports infrasructure for creating messages. In particular, it
can be fed CSV from the spec's `tools/extract-formats.py` and then convert
them all to and from strings and binary formats.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: pyln: new module pyln.proto.message
Moves the 'daemon'ization from c-lightning to the process level, so that
stderr print messages appear in the terminal. Easier debugging!
Changelog-None
At some point lightning-cli help defaulted to human readable format, the additional -H broke the bash completion.
Changelog-Fixed: bash completion on lightning-cli now works again
contrib/pyln-proto/pyln/proto/bech32.py:120
/home/rusty/devel/cvs/lightning/contrib/pyln-proto/pyln/proto/bech32.py:120: SyntaxWarning: "is not" with a literal. Did you mean "!="?
assert decode(hrp, ret) is not (None, None)
I think this warning is correct (though I don't see the warning once I installed coincurve:
are we suppressing warnings?)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I quickly ran through the comments in lightning.py and saw a few small inconsistencies:
- upper/lower case for the "B" in "Bitcoin" unified (see https://github.com/lnbook/lnbook/pull/98)
- added missing "." after a complete sentence
- removed unnecessary double spaces
secp256k1 Python library is not maintained anymore and coincurve was
already used in the `wire` module.
Changelog-None
Signed-off-by: Michal Rostecki <mrostecki@mailfence.com>
Telling `lightningd` to pass a `-datadir` to `bitcoin-cli` so it doesn't go
snooping where it doesn't belong (i.e., the user's home directory and config).
Changelog-None
Suggested-by: Simon Vrouwe <@SimonVrouwe>
Signed-off-by: Christian Decker <@cdecker>
This was breaking a couple of tests if the pyln version was not synced up with
`lightningd`, so now we just warn (these are then collected when running in
pytest and highlighted).
We only support a very limited number of argument combinations, and apparently
sometimes we trigger a case we aren't handling. This adds a more useful error
message, including the params we didn't match.
So far we've always cleared the node directory when provisioning the node, but
while testing some plugins we noticed that pre-generating some files in that
directory is useful. This just adds yet another flag to `get_node` that
disables deleting any existing node directory.
A CONSERVATIVE/3 target for them.
Some noisy changes to the tests as we had to update the estimatesmartfee
mock.
Changelog-Changed: We now use a higher feerate for resolving onchain HTLCs and for penalty transactions
We kept track of an URGENT, a NORMAL, and a SLOW feerate. They were used
for opening (NORMAL), mutual (NORMAL), UNILATERAL (URGENT) transactions
as well as minimum and maximum estimations, and onchain resolution.
We now keep track of more fine-grained feerates:
- `opening` used for funding and also misc transactions
- `mutual_close` used for the mutual close transaction
- `unilateral_close` used for unilateral close (commitment transactions)
- `delayed_to_us` used for resolving our output from our unilateral close
- `htlc_resolution` used for resolving onchain HTLCs
- `penalty` used for resolving revoked transactions
We don't modify our requests to our Bitcoin backend, as the next commit
will batch them !
Changelog-deprecated: The "urgent", "slow", and "normal" field of the `feerates` command are now deprecated.
Changelog-added: The fields "opening", "mutual_close", "unilateral_close", "delayed_to_us", "htlc_resolution" and "penalty" have been added to the `feerates` command.
