This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
This is now allowed for anchors (as per https://github.com/lightningnetwork/lightning-rfc/pull/847).
We need to play with feerates, since we don't put a discount on anchor
commitments yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes the new bolt11 test vectors, and also removes the
requirement that HTLCs be less than 2^32 msat. We keep that for now
because Electrum enforced it on receive: in two releases we will stop
that too.
So no longer warn about needing mpp in that case either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Protocol: No longer restrict HTLCs to
We weren't actually getting the last log out; this does that.
We have to fix test_bitcoin_failure which now notices the BROKEN
log message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: libplugin: Fatal error messages from plugin_exit() now logged in lightningd.
Changelog-Changed: Change order parameters in the listforwards command
Changelog-Deprecated: Change order of the status parameter in the listforwards rpc command.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
After some discussion with @shesek, and my own usage, we agreed that
a more comprehensive interface, which explicitly supports grouping,
is desirable.
Thus keys are now arrays, with the semantic that a key is either a
parent or has a value, never both.
For convenience in the JSON schema, we always return them as arrays,
though we accept simple strings as arguments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We add a generation counter, and allow update or del conditional
on a given generation.
Formalizes error codes, too, since we have more now.
Suggested-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The function is already provided in
contrib/pyln-testing/pyln/testing/utils.py (which is also
imported in this module), so there is no need to define it
a second time.
We actually were waiting for l3 to disconnect, not l2.
But in general we should be looking for status rather than grovelling
in the logs where possible, so I changed all those.
```
2021-08-17T04:40:34.9015538Z # l2 leases a channel from l3
2021-08-17T04:40:34.9016520Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9017570Z rates = l2.rpc.dev_queryrates(l3.info['id'], amount, amount)
2021-08-17T04:40:34.9018724Z l3.daemon.wait_for_log('disconnect')
2021-08-17T04:40:34.9019851Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9021467Z l2.rpc.fundchannel(l3.info['id'], amount, request_amt=amount,
2021-08-17T04:40:34.9022865Z feerate='{}perkw'.format(feerate), minconf=0,
2021-08-17T04:40:34.9024000Z > compact_lease=rates['compact_lease'])
...
2021-08-17T04:40:34.9103422Z > raise RpcError(method, payload, resp['error'])
2021-08-17T04:40:34.9106829Z E pyln.client.lightning.RpcError: RPC call failed: method: fundchannel, payload: {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'amount': 500000, 'feerate': '2000perkw', 'announce': True, 'minconf': 0, 'request_amt': 500000, 'compact_lease': '029a00640064000000644c4b40'}, error: {'code': 400, 'message': 'Unable to connect, no address known for peer', 'data': {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'method': 'connect'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fail waiting for 'Resolved OUR_UNILATERAL/DELAYED_OUTPUT_TO_US by our proposal OUR_DELAYED_RETURN_TO_WALLET'
because we close *two* channels, but only wait for one transaction before mining a block.
This means we might only have one, and we immediately mine the next wait_for_mempool=1,
so the OUR_DELAYED_RETURN_TO_WALLET isn't mined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If l3 is too slow, it can get channel_announcement after channel
is closed, so it gets upset at the node_announcement which follows:
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Updated pending announce with update 103x1x1/1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: channel_announcement: no unspent txout 103x1x1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_NODE_ANNOUNCEMENT before announcement 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This actually caused the flake in test_funding_reorg_private, where
l1 and l2 might not mark the original channel disabled. In fact, they
should *remove* it as it gets reorged out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It subsumes `decodepay`, and it's nicer if people can just assume it's
available at all times.
Changelog-Added: JSON-RPC: `decode` now available without `experimental-offers`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pointed out by @fiatjaf, and indeed it happened to me as well; a peer with
a high feerate reconnects and sends a similar (but now ludicrous) feerate,
and we get upset:
```
$ lightning-cli listpeers 039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36
{
"peers": [
{
"id": "039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36",
"connected": false,
"channels": [
{
"state": "CHANNELD_NORMAL",
"scratch_txid": "d796aa9c44920cc7169cdb61e36437bf180cedaec44103a69591ce2baac9b1d9",
"last_tx_fee": "14329000msat",
"last_tx_fee_msat": "14329000msat",
"feerate": {
"perkw": 19791,
"perkb": 79164
},
```
Then in the logs:
```
2021-07-23T19:34:56.227Z DEBUG 039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36-channeld-chan#39381: billboard perm: update_fee 17055 outside range 253-7210
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, Shesek tried an empty offer description, and the
resulting signature didn't match since it was omitted entirely from
the bolt12 string!
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't automatically *reject* an invoice which asks for a different
msat than we specified (caller may!), but we don't bother noting it
unless it is different.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You could have quantity_min of 0, which makes no sense; spec has been
updated, so quote and enforce that.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Documentation for the funderupdate command on the funder plugin.
Realized we were missing the "leases_only" in the output; also adds
'_msat' to msat denominated outputs so they're parsed correctly by our
python bindings (also matches our naming conventions)
Changelog-EXPERIMENTAL: funder: `funderupdate` command to view and update params for contributing our wallet funds to v2 channel openings. Provides params for enabling `option_will_fund`.
Since we now use 'compact_lease' to gate an open (if the rates have
changed, we fail), we no longer need to rely on query rates for figuring
things out, so we make it dev-only.
Changelog-Changed: JSON-API: queryrates is now developer only
If there's no plugin currently in place, we simply won't return any
funding at all, in which case we'd expect them to handle however
they want. (our implementation would fail the open, as we only accept
opens that have at least as much as we've requested provided)
Useful for parsing a passed in feerate before calling lightningd with
it, e.g. when you need to know what the feerate is for a fundpsbt before
calling fundpsbt
Changelog-Added: JSON-RPC: new command `parsefeerate` which takes a feerate string and returns the calculated perkw/perkb
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This is in preparation for removing support (next release?).
Changelog-Changed: Protocol: We now assume nodes support TLV onions (non-legacy) unless we have a node_announcement which says they don't.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In fact, we make it compulsory, which means if you don't understand it
you'll hang up on us!
Add some logging for that in future.
Changelog-Changed: Protocol: All new invoices require a payment_secret (i.e. modern TLV format onion)
Changelog-Changed: Protocol: We can no longer connect to peers which don't support `payment_secret`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for regtest and testnet. Sure, you shouldn't use this on mainnet,
but I haven't restricted it because our users are usually pretty clever.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #1806
Changelog-Added: config: `force_feerates` option to allow overriding feerate estimates (mainly for regtest).
We don't do it for sendinvoice (yet?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` can take a payer note, and `listinvoice` will show the payer_notes received.
As per latest spec revision.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: BOLT12 offers can now be unsigned, for really short QR codes.
100+ is for experimentation, modern spec practice is to assign feature bits
sequentially as PRs get added, to avoid later renumbering.
Still respect the old bit for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And even if we can't find *ourselves* because we have no channels
(we won't be able to pay, sure, but we can request an invoice!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And add the local_offer_id to the schemas too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSONRPC: `listoffers` now shows `local_offer_id` when listing all offers.
We were actually using the last commit tx's size, since we were
setting it in lightningd. Instead, hand the min and desired feerates
to closingd, and (as it knows the weight of the closing tx), and have
it start negotiation from there.
This can be significantly less when anchor outputs are enabled: for
example in test_closing.py, the commit tx weight is 1124 Sipa, the
close is 672 Sipa!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: Use a more accurate fee for mutual close negotiation.
We set amounts to a list, but then don't use the values except
as a boolean.
Make it a boolean, which should also speed the test up!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us transition (with a few supporting changes) to closingd,
which will happily let them mutual close with us.
We already handle the case where this mutual close is redundant (for
packet loss), so this is easy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We will now reestablish and negotiate mutual close on channels we've already closed (great if peer has lost their database).
Let the callers do that (only channeld needs to do this).
We temporarily send an error on unknown reestablish in openingd, as
this mimic previous behavior and avoids breaking tests (it does leave
a BROKEN message in the logs though, so
test_funding_external_wallet_corners needs to ignore that for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, if one side sees the final CLOSING_SIGNED and the other
doesn't, we won't talk when it reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
This was turned by at random by CI:
1. Alice has sent shutdown, but it still waiting for revoke_and_ack.
2. Bob has sent and received shutdown, and sent revoke_and_ack,
so it considers it time for signature exchange.
3. Disconnect before Alice received revoke_and_ack.
4. Reconnect, Bob is in closingd, which doesn't rexmit revoke_and_ack.
5. Timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That's a terrible, terrible idea. (Documentation comes in later patch
which has the schema).
Also, blockheight is a u32, so simplify.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listtransactions` `outputs` `satoshis` field (use `msat` instead).
In general, it's better to omit a field than put in a 'null', and
putting variable-named fields in an object is also a bad idea.
This is reflected in how hard this is to express in JSON schema, too.
Others:
1. Remove the obsolete "funding": "LOCAL" from unopened channels, but add
"opener": "local" as used in normal channels.
2. htlc cltv_expiry is a u16.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listfunds` `channels` `funding_allocation_msat` and `funding_msat`: use `funding`.
Changelog-Deprecated: JSON-RPC: `listfunds` `channels` `last_tx_fee`: use `last_tx_fee_msat`.
Changelog-Deprecated: JSON-RPC: `listfunds` `channels` `closer` is now omitted if it does not apply, not JSON `null`.
https://github.com/lightningnetwork/lightning-rfc/pull/877 talks about
removing this restriction (only Electrum actually enforced it on
receive), so start by allowing creation of giant invoices, though
we mark them as requiring mpp.
Changelog-Changed: JSON-RPC: `invoice` now allows creation of giant invoices (>= 2^32 msat)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Test that it roundtrips with the non-stdin way, in order to make sure we
don't introduce a discrepancy between the two.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This turned into a more extensive cleanup than intended. The previous
warnings were overlapping and confusing, especially now MPP is the norm.
*warning_capacity* is now the "even under best circumstances, we don't
have enough incoming capacity", which is really what
warning_mpp_capacity was trying to say (no longer printed).
*warning_offline* and *warning_deadends* are only given if adding such
peers would have helped give capacity (i.e. not if *warning_capacity*
is set). The new *warning_private_unused* tells you that we would
have sufficient capacity, but we refused to expose private channels.
The test cases have been enhanced to cover the new warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now gives `warning_private_unused` if unused unannounced channels could have provided sufficient capacity.
Changelog-Changed: JSON-RPC: `invoice` warnings are now better defined, and `warning_mpp_capacity` is no longer included (since `warning_capacity` covers that).
Temporarily rename old getroute to getrouteold (we will remove this).
Changelog-Changed: JSON-RPC: `getroute` is now implemented in a plugin.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If l2 doesn't have the funding locked in, the rest of the test fails
(we got a timeout on `wait_for(lambda: [c['active'] for c in l2.rpc.listchannels('103x1x0')['channels']] == [False, False])`)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, sending a v1 address (or, in fact, any random crap!)
would cause the unsupporting node to unilaterally close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I did this by copying the updated bech32 code, and then re-patching in
our minor changes:
1. Headers modded (we need size_t)
2. Explicit length for bech32_encode/decode (not 90).
3. Exposing and bech32_ prefix for convert_bits, charset, charset_rev.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Annotating the htlc in `listpeers` with their current status, and
which plugin is currently holding on to them with their
`htlc_accepted` hook can help us debug where plugins may go wrong.
Changelog-Added: jsonrpc: HTLCs in `listpeers` are now annotated with a status if they are waiting on an `htlc_accepted` hook of a plugin.
This test takes 695 seconds, because fundwallet waits for the wallet to
notice the tx, which takes 60 seconds if not DEVELOPER. Do all the waiting
at once, and this speeds the test up to 153 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As you can see, I did a lot of debugging before realizing that the
actual problem is in the pay plugin :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This reverts commit 2b12cac31e. There is
no need to skip the test in this case, and it seems to simply be an artifact
of CI-debugging hell :)
Changelog-None
This adds our first (basic) schema, and sews support into pyln-testing
so it will load schemas for any method for doc/schemas/{method}.schema.json.
All JSON responses in a test run are checked against the schema (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
result should *always* be an object. This allows it to add fields
without breaking the API. A command which returns "result" as a
string is living in sin.
This changes one of the two callers of "command_success_str".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes anysegwit and the updated HTLC tiebreak test vector. It
also adds explicit wording for invalid per_commitment_secret (which
nicely matches our code already!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `fundchannel` and `multifundchannel` will now reserve funding they use for 2 weeks instead of 12 hours.
We already have this field in reserveinputs and unreserveinputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listfunds` has a new `reserved_to_block` field.
Tor v2 hidden services have been deprecated for a while:
https://blog.torproject.org/v2-deprecation-timeline .
This prevents user from being able to set them in the configuration
and to connect to them while still letting us be able to parse them
for gossip.
Changelog-Deprecated: lightningd: v2 Tor addresses. Use v3. See https://blog.torproject.org/v2-deprecation-timeline.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
test_funding_cancel_race uses fundchannel_open etc; this new test does a
similar (but not exact thing, as 'aborts' dont work after an update
is confirmed) thing, using openchannel_update and openchannel_abort.
We set the timeout on first HTLC, but didn't clear it if that HTLC failed.
It's saner to have a per-HTLC timeout (since that's what it is!) and
also our timer infra is specially coded to scale approximately infinitely so
trying to optimize this is vastly premature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We would sometimes gratuitously disconnect 30 seconds after an HTLC failed.
If l2 didn't get FUNDING_LOCKED from l1 before it disconnected, it
won't be in state CHANNELD_NORMAL: it will be in DUALOPEND_AWAITING_LOCKIN.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This would flake fairly regularly, what we really care about is
asserting that the l2 node is in CHANNELD_NORMAL state, while the l1
node hasn't progressed that far yet.
Trying to put all the disconnect logic into the same path was a dumb
idea. If you asked to reconnect but passed in an 'unsaved' channel, we
would not call the 'reconnect' code.
Instead, we make a differentiation between "unsaved" channels
(ones that we haven't received commitment tx for) and handle the
disconnect for these separate from where we want to do a reconnect.
Tests that will only run when !EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v1')
def test_...()
Tests that will only run when EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v2')
def test_...()
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4494
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: config: New option `log-timestamps` allow disabling of timestamp prefix in logs.
Since plugins will start sending them soon, and they are likely to get
it wrong sometimes, be a bit more lenient, warn them in the logs
instead and then make sure it doesn't accidentally work anyway.
We will eventually start emitting and dispatching custom notifications
from plugins just like we dispatch internal notifications. In order to
get reasonable error messages we need to make sure that the topics
plugins are asking for were correctly registered. When doing this we
don't really care about whether the plugin that registered the
notification is still alive or not (it might have died, but
subscribers should stay up and running), so we keep a list of all
topics attached to the `struct plugins` which gathers global plugin
information.
Behold! An immaculately concepted plugin for configuring your node to do
amazing things*
*fund channel open requests
Changelog-Added: Plugins: Add `funder` plugin, which allows you to setup a policy for funding v2 channel open requests. Requres --experimental-dual-fund option
We don't always get two transactions on line 1019; the comment is
confused (only one penalty tx successfully comes out of l3). So make
sure we get the other transactions when we expect them, and then
make this test more specific.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
We didn't wait for the sendtx to complete before shutting down,
and hence timed out:
```
l2.daemon.wait_for_log('Broadcasting funding tx')
l1.stop()
l2.stop()
bitcoind.generate_block(6)
l1.restart()
l2.restart()
# Make sure we're ok.
> l2.daemon.wait_for_log(r'to CHANNELD_NORMAL')
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Channel can be inactive before it disconnects, apparently. Check
explicitly for the disconnected state so we get the expected error.
Here's what happened:
```
# Can't pay while its offline.
with pytest.raises(RpcError, match=r'failed: WIRE_TEMPORARY_CHANNEL_FAILURE \(First peer not ready\)'):
> l1.rpc.sendpay(route, rhash)
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
```
And the logs show that the outgoing HTLC was sent to channeld before it
realized the connection was closed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Change the address in the canned db: it seems we won the lottery and
l1 connected, and got an error!
```
E ValueError:
E Node errors:
E - lightningd-1: had warning messages
E Global errors:
...
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_CHANNEL_REESTABLISH
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_GOSSIP_TIMESTAMP_FILTER
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_ERROR
lightningd-1: 2021-04-07T02:44:53.580Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: error channel fdeb1ea12e02aa043f66ba581e969a1882d21142b19429995c6733bb71070bb6: Multiple channels unsupported
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Will try reconnect in 60 seconds
```
So I changed the port in the db to "1" which will never succeed:
```
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:38723');
COMMIT;
sqlite> UPDATE peers SET address="127.0.0.1:1"
...> ;
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:1');
COMMIT;
sqlite>
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
This was flaky because sometimes we'd generate blocks before the funding
transaction reached the mempool.
If we wait until it's in, it works as expected.
[ Neatened to use wait_for_mempool arg --RR ]
We updated the "UNKNOWN TYPE channel_id" -> the actual channel id;
the reason for why the error fails shouldn't be restrictive (we just
know that it fails)
There is little point in faking a self-payment, but we should also not
crash :-)
Fixes#4438
Changelog-Fixed: keysend: Keysend returns an error when a self-payment is requested
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
And update all the in-tree callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `fundchannel_complete` `txid` and `txout` parameters (use `psbt`)
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a version of this that keeps the PSBT in memory and does some
fancy addition/subtraction of unuseable parts for the v2's, however
it's much easier and simpler to simply error on the peer and re-start
from the very beginning.
This only works if we haven't gotten commitments from the peer yet (in
fact either method would only work if we haven't got commitments from
the peer yet), so if we've got commitments from them we simply mark them
as failed an go again.
In a perfect world, we'd remember what inputs we used last time, and
reuse those again on the re-attempt, which would pefectly guarantee both
that the failed opens (ones w/ commitments exchanged) would be canceled
after this completes (and we could re-try the failed again).
As it is, this is not perfect. It is, however, servicable.
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
We were not aborting if we had routehints, even though all routehints
may have been filtered out.
Changelog-Fixed: pay: `pay` will now abort early if the destination is not reachable directly nor via routehints.
We would happily spin on attempts that are doomed to fail because we
don't know the entrypoint. Next up: remove routehints whose
entrypoints are known but unreachable.
We consolidate to the latest/singular RFC patch for dual-funding, so
there's just a single patchfile for the change. Plus we move back to the
opener setting the desired feerate, the accepter merely declines to
participate if they disagree with the set rate.
Looks like #4394 treated a symptom but not the root cause. We were
actually sending the message framed with the WIRE_CUSTOMMSG_OUT and
the length prefix over the encrypted connection to the peer. It just
happened to be a valid custommsg...
This fixes the issue, and this time I made sure we actually send the
raw message over the wire. However for backward compatibility we
needed to imitate the faulty behavior which is 90% of this patch :-)
Changelog-Fixed: plugin: `dev-sendcustommsg` included the type and length prefix when sending a message.
Users have no idea what they would pay for unilateral closes.
At least this gives them a clue!
Reported-by: @az0re on IRC.
Changelog-Added: JSON-RPC: `listpeers` now shows latest feerate and unilaral close fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec doesn't say to do this, but it makes sense, otherwise
they'll never be able to mutually close the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were always prefixing the `message` field with the internal type
prefix 0x0407, followed by the length prefix. Neither is needed since
the type being constant is of no interest to the plugin and the length
being implicit due to the JSON-encoding.
Reported-by: Ilya Evdokimov
Changelog-Fixed: plugin: The `custommsg` hook no longer includes the internal type prefix and length prefix in its `payload`
Changelog-Deprecated: plugin: The `message` field on the `custommsg` hook is deprecated in favor of the `payload` field, which skips the internal prefix.
They need to specify fees to get a channel before this, but it's possible.
The test revealed no surprises (other than the last change).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Saves a great deal of confusion for regtest users.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: If bitcoind won't give a fee estimate in regtest, use minimum.
This avoids spamming the logs. We also remove the duplicate debug
logs on self-disable (plugin_kill logs it for us).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a plugin died due to connection close, we'd always say
"Plugin exited before completing handshake.", which was often
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If not all nodes are up-to-date with the new blocks, they can reject
announcements:
```
lightningd-4: 2021-02-23T02:02:47.832Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Ignoring future channel_announcment for 124x1x0 (current block 123)
lightningd-4: 2021-02-23T02:02:47.848Z DEBUG lightningd: Adding block 133: 2d950451211398de9c10bf9df7eb53b385390eca31e306bc8fc1387b53d9f9a2
lightningd-4: 2021-02-23T02:02:47.865Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/0
lightningd-4: 2021-02-23T02:02:47.866Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/1
```
Technically, this change is not sufficient either, since *gossipd* might
not know about new block yet. But it makes this case less likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get a label clash: easy, just re-serve:
```
2021-02-18T04:29:37.474Z **BROKEN** plugin-offers: Failed invoice_request lnr1qgsqvgnwgcg35z6ee2h3yczraddm72xrfua9uve2rlrm9deu7xyfzrcyyqwtp0rmsgquvuacqcl5cdfzwzmu3v8tqgvpqs8e80dlmxm7ey4xwrqdsqqqqqqqqqqqqqqqq2pqqfqpqynzqzx9rylzy40ernj4jzc3p2dwy3n8x6lqeaywwk725ghx4kx63pcfxgg2z3nsn80jzge06nt3ks8pr6rvnujq48376lpmrr3cq04nurpy783eyr0awh5773lrlmjek07rjf0nx4g9235ulkcs7jp2h5gumjyquhadh846da3jptxm9g0qz5lne4hjhag for offer 1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67: Got JSON error: {\"code\":900,\"message\":\"Duplicate label\",\"data\":{\"label\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67-08c5193e2255f91ce5590b110a9ae2466736be0cf48e75bcaa22e6ad8da88709-1\",\"bolt12\":\"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\",\"payment_hash\":\"396250395aa046f4c58162a5ae31952d01bd0c8e5213f32e748ec428a9379cd2\",\"msatoshi\":7700446,\"amount_msat\":\"7700446msat\",\"status\":\"unpaid\",\"description\":\"Weekly coffee for rusty!\",\"expires_at\":1614832137,\"local_offer_id\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67\"}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to only set it for single-use offers (where it's required),
but it's still interesting for multi-use offers, so let's keep it
there.
We also put this field in the documentation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Nested `with` exception checks don't work; fix flakes i'm seeing with
valgrind causing failures because blockchain not up to date when
`fundchannel` called.
We weren't waiting for the channel to get to normal state:
E pyln.client.lightning.RpcError: RPC call failed: method: pay, payload: {'bolt11': 'lnbcrt20m1pszfpezpp549um3vuyt52rgea32g7u55a5fv29yv7t94cmr2f0vjgcc33m3dvqdqzdgxqyjw5qcqp9sp59vu4tat2n53ylzrgxa95s5wu2s885a9llud64c0f6gjqts7h6tks9qy9qsq7u0j3w2h3sxxp9axpjxkz525znjn0t92gnrgk7y6plyq39zw9994g88xxjx52egk4965dp5qt2w08hk009eq9hm8nykwmxe7r705k8gpkqu9mw'}, error: {'code': 210, 'message': 'Ran out of routes to try after 1 attempt: see `paystatus`', 'attempts': [{'status': 'failed', 'failreason': 'Cannot attempt payment, we have no channel to which we can add an HTLC', 'partid': 1, 'amount': '2000000000msat'}]}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LightningNode.join_nodes and LightningNode.openchannel internally
generate blocks, which causes nodes to be out of sync, and ignore
"future" announcements, because they haven't seen that block yet.
It was using a trick to only shut down the first node, and forgetting
about the others. This could lead to processes not being stopped
correctly and to test failures because the directory isn't cleaned up
correctly.
Now we use the executor to shut as many nodes as possible in parallel.
In the case where you want a PSBT and also want the output to be added
as a change address, use `excess_as_change` = true.
Generates a change address to use. If you want to pay the excess
elsewhere, you will have to add separately.
Changelog-Added: JSON-RPC: Add new parameter `excess_as_change` to fundpsbt+utxopsbt
Since we turned many errors into warnings, we want our tests to fail
when they happen unexpectedly. We make WARNING clear in the strings
we print, too, to help out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
And make all the callers choose which one. In general, I prefer warn,
which lets them reconnect and try again, however some places are either
stated that they must be errors in the spec itself, or in openingd
where we abandon the channel when we close the connection anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we now send warning messages and close the connection, except on unrecoverable errors.
We construct the route manually so we may not have the
channel_announcement yet. But we can get an update from the error
packet, which can lead to:
```
2021-01-29T01:38:23.4767334Z ValueError:
2021-01-29T01:38:23.4767987Z Node errors:
2021-01-29T01:38:23.4768767Z - lightningd-1: had bad gossip messages
2021-01-29T01:38:23.4769512Z Global errors:
2021-01-29T01:38:23.4770300Z
2021-01-29T01:38:23.4771109Z contrib/pyln-testing/pyln/testing/fixtures.py:197: ValueError
...
2021-01-29T01:38:23.7820197Z lightningd-1: 2021-01-29T01:26:57.460Z DEBUG gossipd: Extracted channel_update 01027217b3086ad9f3dee1fa55b94c5fd2a4b0637bec70ba727ba4151a8de5173ddc749db3502d41ab0ae164addc8fd013d2088b6a12a2f478ae0affa94d76d8845c06226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f000067000001000160136459010000060000000000000000000000010000000a000000003b023380 from onionreply 100d0000007500887217b3086ad9f3dee1fa55b94c5fd2a4b0637bec70ba727ba4151a8de5173ddc749db3502d41ab0ae164addc8fd013d2088b6a12a2f478ae0affa94d76d8845c06226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f000067000001000160136459010000060000000000000000000000010000000a000000003b023380
2021-01-29T01:38:23.7837450Z lightningd-1: 2021-01-29T01:26:57.461Z DEBUG gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 103x1x1/0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should actually be including this (as it may define _GNU_SOURCE
etc) before any system headers. But where we include <assert.h> we
often didn't, because check-includes would complain that the headers
included it too.
Weaken that check, and include config.h in C files before assert.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fix up the test by using pay, instead of sendpay (and making pay log
the expected message).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: sendpay no longer extracts updates from errors, the caller should do it from the `raw_message`.
Nit: The underscore in "openchannel_hook" is wrong, bcause the name of
the hook is just "openchannel". The "_hook" implied this to be part of
the name.
Changelog-None
The test was not considering that concurrent sendrawtx of the same tx
is not stable, and either endpoint will submit it first. Now just
checking state transitions and the mempool.
If we're quick (or the node is slow) we end up reconnecting before our
counterparty has realized the state transition, resulting in an
unexpected re-establish.
We were sometimes waiting only 5 seconds, which is way too short on a
heavily loaded machine such as CI. Making it 30 seconds and collecting
it in a single place so we can adjust more easily.
We also make the logic a bit nicer to read. The failure was due to
more than one status message being present if we look at the wrong
time:
```
arr = ['CLOSINGD_SIGEXCHANGE:We agreed on a closing fee of 20334 satoshi for tx:17f1e9d377840edf79d8b6f1ed0faba59bb307463461...9b98', 'CLOSINGD_SIGEXCHANGE:Waiting for another closing fee offer: ours was 20334 satoshi, theirs was 20332 satoshi,'] │
def only_one(arr):
"""Many JSON RPC calls return an array; often we only expect a single entry
"""
> assert len(arr) == 1
E AssertionError
```
We weren't waiting for the transactions to enter the mempool which
could cause all of our fine-tuned block counts to be off. Now just
waiting for the expected number of txs.
The fetchinvoice and offers plugins disable themselves if the option
isn't enabled (it's enabled by default on EXPERIMENTAL_FEATURES).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-offers` enables fetch, payment and creation of (early draft) offers.
By returning 'disable: <reason>' inside getmanifest or init result.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: plugins can now disable themselves by returning `disable`, even if marked important.
Note that this also changes so the feature is not represented in channels,
reflecting the recent drafts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-onion-messages` enables send, receive and relay of onion messages.
There's a case where a dropped funding_locked will result in the peer
moving onto channeld, while we stay in dualopend. As we haven't
received their funding_locked, we retransmit tx_sigs, which channeld
will need to handle.
With the patch the peer drops it on the floor; the peer will resend
funding_locked on reconnect, which will correctly advance us to
channeld and CHANNELD_NORMAL
As per lastest revision of the spec, we can specify amounts in invoice
requests even if the offer already specifies it, as long as we exceed
the amount given. This allows for tipping, and amount obfuscation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Means a reshuffle of our logic: we want to multiply by quantity before
conversion for maximum accuracy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids a footgun where they create an offer then we can't create
the invoice because they don't have a converter plugin.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We split `send_invoice` offers inoo offerout (for want of a better name).
This simplifies the API.
Also took the opportunity to move the `vendor` tag to immediately
follow `description` (our tests use arguments by keywords, so no
change there).
Suggested-by: shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
refund offers are implied send_invoice offers. And send_invoice offers
are implied single-use offers, though it can also make sense to have
a non-send_invoice offer be single-use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required if we want to create a "bouncer" plugin (in my copious free time!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now takes an optional `cltv` parameter.
Changelog-changed: lightningd: the `--encrypted-hsm` now asks you to confirm your password when first set
Changelog-changed: hsmtool: the `encrypt` now asks you to confirm your password
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
A fractional satoshi value isn't really useful; rounding up loses
precision but that's why you called "whole satoshi", wasn't it?
Changelog-Changed: pyln-client: Millisatoshi has new method, `to_whole_satoshi`; *rounds value up* to the nearest whole satoshi
We need to use it for the 'df_accepter' plugin, so we get the feerate
correct.
Changelog-Added: pyln-client: `fundpsbt`/`utxopsbt` now support `min_witness_weight` param
Fixes#4302
Changelog-fixed: hsmtool: the `generatehsm` command now generates an appropriately-sized hsm_secret
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This slightly breaks the API, but still accept the input: we just don't
take it into account anymore.
For `dumponchaindescriptors`, we have to still take the old place of the
`network` parameter into account to not entirely break the API.
Changelog-Added: hsmtool: password must now be entered on stdin. Password passed on the command line are discarded.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
We were getting bad gossip because some nodes discarded the channel
announcement for being in the future. This is because the node was, at
that time, below the confirmation height. It'd then discard the
followup messages because not preceded by an announcement, and getting
upset about that.
Both my machine and apparently the CI tester machines regularly run
into issues with load on the system, causing timeouts (and
unresponsiveness). The throttler throttles the speed with which new
instances of c-lightning get started to avoid overloading. Since the
plugin used for parallelism when testing spawns multiple processes we
need to lock on the fs. Since we have that file open already, we'll
also write a couple of performance metics to it.
1. Hoist 7200 constant into the bolt12 heade2.
2. Make preimage the last createinvoice arg, so we could make it optional.
3. Check the validity of the preimage in createinvoice.
4. Always output used flag in listoffers.
5. Rename wallet offer iterators to offer_id iterators.
6. Fix paramter typos.
7. Rename `local_offer_id` parameter to `localofferid`.
8. Add reference constraints on local_offer_id db fields.
9. Remove cut/paste comment.
10. Clarify source of fatal() messages in wallet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"multi" means that specifying a parameter twice will append, not override.
Multi args are always given as a JSON array, even if only one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: new "multi" field allows an option to be specified multiple times.
This was fixed in 0.8.2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: plugins: options to init are no longer given as strings if they are bool or int types (deprecated in 0.8.2).
We were blindly initiating the keysend payment, which could lead to
confusing outcomes. This adds a very specific error message to the
error returned.
Changelog-Fixed: keysend: Keysend now checks whether the destination supports keysend before attempting a payment. If not a more informative error is returned.
The latter is available only starting with Python 3.7, and it's the
only test that fails with <3.7. This allows us to keep on testing with
older versions.
