mirror of
https://github.com/rootzoll/raspiblitz.git
synced 2025-02-28 16:58:03 +01:00
44 lines
1.3 KiB
Markdown
44 lines
1.3 KiB
Markdown
Some good practices for assembling your node's hardware can be found below.
|
|
|
|
## Table of Contents
|
|
|
|
- [Setup with Metal Case](#setup-with-metal-case)
|
|
- [Setup with Heatsink Case](#setup-with-heatsink-case)
|
|
|
|
|
|
## Setup with Metal Case
|
|
|
|
1. Apply thermal pads.
|
|
2. Close the case.
|
|
3. Make sure you use the right pins when mounting the display.
|
|
4. Connect the SSD with the raspberry pi.
|
|
5. Plug your device into power and give it internet access to check if
|
|
everything is working as expected.
|
|
|
|
|
|
|
|
|
|
## Setup with Heatsink Case
|
|
|
|
1. Put screw mounts on the SSD shield.
|
|
2. Prepare screws for mounting the Raspberry PI and corresponding heat sink.
|
|
3. Apply thermal pads.
|
|
4. Attach the heat sink and raspberry pi.
|
|
5. Attach the foot that will later hold things in place.
|
|
6. Make sure you use the right pins when mounting the display.
|
|
7. Fasten the SSD so that it doesn't shake.
|
|
|
|
|
|
|
|
|
|
8. Open the SD card slot.
|
|
9. Attach everything to the case.
|
|
10. Close the case.
|
|
11. Connect the SSD with the raspberry pi.
|
|
12. Insert the flashed SD card.
|
|
13. Remember to use a tamper evident bag before entrusting a third party
|
|
with physical access to the device.
|
|
|
|
|
|
|
|
|