We still accept boolean: the plugin may not want to commit to a deprecation schedule.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: rpcmethods and options can set `deprecated` to a pair of version strings, not just a boolean.
This command allows more fine-grained testing, without having to change the config of the
lightning node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `deprecations` to enable/disable deprecated APIs from this caller.
This allows the user to specify the feature *by name*, and hopefully
complain to the developer to fix their code, knowing it will be removed entirely
in the next release!
Changelog-Added: config: `i-promise-to-fix-broken-api-user` allows for a one-release re-enablement of long-deprecated features.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Each feature has a name, and says when deprecation begins and ends.
There's an API coming to allow you to re-enable on a per-feature basis
even if it's ended (as long as it's not been removed from the code ofc!).
Default end is 6 months after deprecation, i.e. we complain about it
at that point, if we can detect its use.
e.g, a standard deprecation in v24.05:
v24.02: allowed
v24.02 with mods: allowed
master after v24.02: allowed unless deprecated APIs disabled.
v24.05: allowed unless deprecated APIs disabled.
v24.08: allowed unless deprecated APIs disabled.
v24.11: allowed unless deprecated APIs disabled, but logs at BROKEN level.
v25.02: allowed only if --i-promise-to-fix-broken-api-user=FEATURE.
v25.05: code is actually removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Config: `disable-ip-discovery` (deprecated in v23.02): use `announce-addr-discovered`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Seriously, it's taproot time, let's get rid of p2sh wrapped segwit.
Changelog-Removed: wallet: removal of p2sh-segwit addresses; newaddr won't issue them, we won't watch them for new funds (deprecated in *23.02*)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is good info to have, that I often forget and have to spend time
looking for. It'd be nice to have it documented in the project somewhere
so people new the project (or new to maintaining maybe?) know where to
find it.
In the original [$6173] pr `bind` was a typo for `bind-addr`.
`bind` never existed, so this commit updates uses of `bind` to `bind-addr`.
This links lightningd-config.5.md to configuration.md since `bind-addr` has options of interest such as ipv4/ipv6.
When the value of a `dynamic` option is updated core Lightning
will make a JSON-RPC request to the plugin.
The documentation falsely mentioned the request has a method named
`setvalue. It appears it is actually called `setconfig`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: `listchannels` no longer uses local knowledge to set `active` to false if disconnected.
This alters a few remaining tests, as well.
[ Inclused even more test fixes from Alex Myers <alex@endothermic.dev>! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listchannels` listing private channels: use listpeerchannels
This is redundant if it's a public channel, but vital if it's not. Publishing unconditionally makes
it easier for gossmap: we create a local modification all the time, even if redundant (and we can
have the actual capacity ceiling accurate in this case, since we know it for local channels).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listpeerchannels` now shows gossip update contents (even if channel unannounced).
The data-format changed in 2019.
The field `amount_msat` was renamed to `msat`
(See 2907e430d5)
The data-format changed again in november 2023.
The content of the field `amount_msat` was changed.
It was a string `"1000msat"` and became a number `1000`.
(See 0b23133ab2)
The current documentation still mentions the data-format before
2907e430d5.
I've updated the docs to reflect the latest changes.
I've also incluced a short mention of 0b23133ab2 to help help
developers create plugins that work both pre 23.11 and post 23.11.
Add a version bump for clnrest and the main poetry.lock to the makefile
and update the release checklist to include the new target.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
This will allow users to use clnrest with c-lightning-REST without conflicts.
It was required for applications to have enough time for migrating from c-lightning-REST to clnrest.
Changelog-Changed:
config option `rest-certs` changed to `clnrest-certs`
config option `rest-protocol` changed to `clnrest-protocol`
config option `rest-host` changed to `clnrest-host`
config option `rest-port` changed to `clnrest-port`
config option `rest-cors-origins` changed to `clnrest-cors-origins`
config option `rest-csp` changed to `clnrest-csp`
From the spec:
Once peers are ready to exchange commitment signatures, they must remember
the details of the funding transaction to allow resuming the signatures
exchange if a disconnection happens.
Basically this means we add channels to the database before we've gotten
commitments for them; it's nice that there's now a state for commitments
recevied but we now save the channel prior to that.
This commit makes it possible to track the pre-commit-rcvd but not quite
open-init state.
"Patrick, I'm sorry I doubted you."
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Config: `large-channels` is now the default, wumbology for all.
This makes `check` much more thorough, and useful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `check` now does much more checking on every command (not just basic parameter types).
datastoreusage returns the total_bytes that are stored under a given
{Key} or from root. {Key} is the entry point from which we begin to
traverse the datastore.
Changelog-Added: JSON-RPC: `datastoreusage`: returns the total bytes that are stored under a given key.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
Changelog-Added: Plugins: plugins can now specify (unknown) even messages we should accept from peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This breaks Dijkstra, which is presumably why it was actually
disabled. Remove the code altoghether, instead.
Changelog-Fixed: JSON-RPC: `getroute` now documents that it ignores `fuzzpercent`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also added splice_out tests that use the new PSBT command.
ChangeLog-Added: New `addpsbtoutput` command for creating a PSBT that can receive funds to the on-chain wallet.
This is the variant of DUALOPEND_OPEN_INIT which you see once
the channel is in the db: we'll be adding it next, but to reduce
clutter the docs are added as a separate commit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If you previously configured with `--enable-developer` we turn that into `--enable-debugbuild`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: build: `--enable-developer` arg to configure (and DEVELOPER variables): use `./configure --enable-debugbuild` and `developer` setting at runtime.
Currently it just defaults to the DEVELOPER compile option, but we'll
move over to this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `--developer` enables developer options and changes default to be "disable deprecated APIs".
Added a test for splicing out that exposed some behavior and code glitches that are addressed in this commit.
Added test for splice gossip.
Also added documentation for how to do a splice out.
ChangeLog-Fixed: Added docs, testing, and some fixes related to splicing out, insufficent balance handling, and restarting during a splice.
nodeid is only useful when we know the peer we're talking to (e.g. commando).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No-schema-diff-check: We're simply making optional, not deprecating!
Usage line isn't correct, as fields are not optional, and return
needs fleshing out for error codes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were using `number` instead of `u32` which caused it to be
serialized to string with a decimal, which then would be rejected by
lightningd.
Changelog-Fixed: proto: Fixed a wrong number type being used in routes
1. announce-addr-discovered-port takes a port option.
2. accept-htlc-tlv-types was deprecated in favor of multiple accept-htlc-tlv-type.
3. Document clnrest.py options.
4. Don't list --version twice in lightningd --help (initial_config_opts calls
opt_register_version() already).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It didn't handle the case where an undocumented option was
was a flag (i.e. didn't end in =), so rework it to be
a simple list and use grep.
Add some more options we don't document, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As side-effect, getroute(0) is special too.
Reported-by: MiddleW4y in Discord
Fixes: #6577
Changelog-Fixed: `pay` will still use an invoice routehint if path to it doesn't take 1-msat payments.
This was strongly recommended by Russell O'Connor: the "ms" implies that
it's a BIP-32 master secret, and this is CLN specific.
If we changed the hrp to "cln" it would be better, but apparently that
means we no longer fit in a "standard billfold metal wallet" (and
our code assumes a 2-byte prefix anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
The fields were missing because they weren't annotated with a type and
a description. Adding those fixes them.
Changelog-Fixed: msggen: `listpays` now includes the missing `amount_msat` and `amount_sent_msat` fields
No-schema-diff-check: fields were always there, just undocumented!
This is the simplest solution, not the best, but there's significant risk in try to remove the "we have a path" assumption in the code pay code.
Includes removing a `tal_steal` which was incorrect: the buffer has the same lifetime as the plugin, so if we steal it then things get messy when we free the struct payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `pay` will now pay your own invoices if you try.
Previously, the "payment" and "invoice" paths were completely separate, but this now calls both. It bypasses htlc_sets (and thus, cannot do MPP), and bypasses the hook too: the former is tied closely to HTLCs, and the hook is also very htlc-centric.
Includes finishing unfinished sentence in sendpay man page, as a bonus.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `sendpay` now allows self-payment of invoices, by specifying an empty route.
If you miss a wait event, you can catch up by doing listinvoices and
getting the max of these fields. It's also a good debugging clue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have defined ordering, we can add a start param.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listinvoices` has `index` and `start` parameters for listing control.
This will initially be for listinvoices, but can be expanded to other
list commands.
It's documented, but it makes promises which currently don't exist:
* listinvoice does not support `index` or `start` yet.
* It doesn't actually fire when invoices change yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `wait`: new generic command to wait for events.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
Rune functionality moved into core from commando plugin.
Changelog-Added: JSON-RPC: `checkrune`: check rune validity for authorization; `createrune` to create/modify rune; `listrunes` to list existing runes; `blacklistrune` to revoke permission of rune
Changelog-Deprecated: JSON-RPC: `commando-rune`, `commando-listrunes` and `commando-blacklist`.
No-schema-diff-check
We fixed the others. There are no fields, but this keeps it consistent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `shutdown` notification contains `shutdown` object (notification consistency)
Requested-by: Shahana Farooqui @Shahana
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: plugins can subscribe to all notifications using "*".
Changelog-Added: JSON-RPC: `connect` and `disconnect` notifications now wrap `id` field in a `connect`/`disconnect` object (consistency with other notifications)
This commit is adding the instructions for compiling cln on FreeBSD,
because it looks that we not longer compile with the FreeBSD package
manager, and I have no idea who the mantainer of this package is.
Link: https://github.com/ElementsProject/lightning/issues/6301
Reported-by: @bektar
Changelog-None
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
If we're opening a channel with a peer which support anchors (and
we do), we tell fundpsbt/utxopsbt to enforce the emergency reserve;
this matters, as it doesn't know about the channel yet, and thus
won't (if it's our first anchor channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `fundchannel` and `multifundchannel` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (or are opening one).
This is needed when we know we're *opening* an anchor channel, to
override the "do we already have an anchor channel open?" logic.
Also, document the nonwrapped arg added in v23.02.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundpsbt` and `utxopsbt` new parameter `opening_anchor_channel` so lightningd knowns it needs emergency reserve for anchors.
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
It depends on whether we negotiated anchors: just document that this
field doesn't apply for anchors (it becomes zero by the end of this
patch series, which is weird).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Do it slightly intelligently, so if we had set previously using setconfig
we don't keep appending new ones, but replace it in-place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only implemented for min-capacity-sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `setconfig` allows a limited number of configuration settings to be changed without restart.
To test, we do min-capacity-sat which is simple. We also update the
listconfigs man page which contained some obsolete information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When core lightning is asking the information about
the blockchain with `getchaininfo` command lightningd
know already the information about the min and max block height.
the problem is when we have a smarter Bitcoin backend that is able
to switch between different clients in some cases is helpful
give the information about current known height by lightningd and
pass it down to the plugin.
In this way, the plugin knows what is the correct known height from lightnind, and can
try to fix some problems if any exit.
This is particularly useful when you are syncing a new backend from scratch
like https://github.com/cloudhead/nakamoto and we avoid returning the
lower height from the known, and avoid the crash of core lightning.
With this information, the plugin can start to sync the chain and return
the answer back only when the chain is in sync with the current status of
lightningd.
Another reason to add this field and not wait the correct block in core
lightning itself is because Bitcoin Core is extremely slow to sync up,
so the question here is, how long should we wait? The time depends
on various factors.
With this approach of informing the plugin about the height, in some cases,
you can start the syncing but move the execution to another backend until
the previous one is ready.
The problem I want to solve is that I don't want to be left in the dark when
we run `getchaininfo`, and I want to have the opportunity to wait for
the blockchain sync or decide to dispatch the request elsewhere.
Changelog-Added: Pass the current known block height down to the getchaininfo call.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This PR:
- adds all the guides (in markdown format) that is published at https://docs.corelightning.org/docs
- adds a github workflow to sync any future changes made to files inside the guides folder
- does not include API reference (json-rpc commands). Those will be handled in a separate PR since they're used as manpages and will require a different github workflow
Note that the guides do not exactly map to their related files in doc/, since we reorganized the overall documentation structure on readme for better readability and developer experience. For example, doc/FUZZING.md and doc/HACKING.md#Testing are merged into testing.md in the new docs. As on the creation date of this PR, content from each of the legacy documents has been synced with the new docs. Until this PR gets merged, I will continue to push any updates made to the legacy documents into the new docs.
If this looks reasonable, I will add a separate PR to clean up the legacy documents from doc/ (or mark them deprecated) to avoid redundant upkeep and maintenance.
Changelog-None
We now know the base reference, and we've rebased, so we can do a
simple diff. Also, this means we can use a magic commit message
`No-schema-diff-check` to suppress false positives.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listconfigs` direct fields, use `configs` sub-object and `set`, `value_bool`, `value_str`, `value_int`, or `value_msat` fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use multi-specifiable options elsewhere, this is just another.
Otherwise you can't add, you can only set them all.
Changelog-Added: Config: `accept-htlc-tlv-type` (replaces awkward-to-use `accept-htlc-tlv-types`)
Changelog-Deprecated: Config: `accept-htlc-tlv-types` (use `accept-htlc-tlv-type` multiple times)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `default` no longer accepted on `flag` type parameters (it was silently ignored, so just don't set it).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listconfigs is convenient, but it doesn't handle multi-options well: it
outputs an object with duplicate fields in this case (e.g. log-file), nor
is it extensible to show more than raw values.
However, listconfigs doesn't do what other list commands do (use a
sub-object "configs") so we can put the new values under that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listconfigs` now has `configs` subobject with more information about each config option.
Developers, rejoice (we already have --testnet, --signet and --mainnet!).
Changelog-Added: Config: `--regtest` option as alias for `--network=regtest`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This obsoletes the use of --announce-addr-dns which I know Michael
didn't really like either.
Changelog-Deprecated: Config: `announce-addr-dns`; use `--bind-addr=dns:ADDR` for finer control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a major cleanup to how we parse addresses.
1. parse_wireaddr now supports the "dns:" prefix to support dns records (type 5).
2. We are less reliant on separate_address_and_port() which gets confused by
that colon.
3. We explicitly test every possible address type we can get back from
parsing, and handle them appropriately.
We update the documentation to use the clearer HOSTNAME vs DNS prefixes now
we also have `dns:` as a prefix.
Changelog-Added: Config: `bind` can now take `dns:` prefix to advertize DNS records.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Build: all experimental features are now runtime-enabled; no more ./configure --enable-experimental-features
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out this was accidentally changed for v0.10.1 in
d8e68893f5 where we made fee levels less
aggressive.
Oops. I guess we can fix the docs. And we now have "2blocks" if you
want it really fast!
Closes: #6129
Changelog-Fixed: JSON-RPC: `feerates` document correctly that urgent means 6 blocks (not 2), and give better feerate examples.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
mempool.info gives sat/vB, which is 1000 too low for us!
See-also: #6161 (complains setting feerate to 5 doesn't work)
See-also: #6129
Suggested-by: @lightingorb
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still need to actually make a rune when lightningd starts, as
commando (for safety) won't work unless you actually generate a rune
(that it knows of!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: hsmtool: `makerune` command to make a master rune for a node.
I tested this indeed breaks if we don't accept it, then implemented
the code to accept it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: protocol: We now correctly accept the `option_scid_alias` bit in `open_channel` `channel_type`.
Changelog-Deprecated: protocol: Not setting `option_scid_alias` in `option_channel` `channel_type` for unannounced channels.
Changelog-Added: JSON-RPC: `feerates`: added `floor` field for current minimum feerate bitcoind will accept
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `estimatefees` can return explicit `fee_floor` and `feerates` by block number.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And consolidate descriptions into lightning-feerates().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` now allow "minimum" and NN"blocks" as `feerate` (`feerange` for `close`).
Drop try_get_feerate() in favor of explicit feerate_for_deadline() and
smoothed_feerate_for_deadline().
This shows us everywhere we deal with old-style feerates by names.
`delayed_to_us` and `htlc_resolution` will be moving to dynamic fees,
so deprecate those.
Note that "penalty" is still used for generating penalty txs for
watchtowers, and "unilateral_close" still used until we get zero-fee
anchors.
Changelog-Added: JSON-RPC: `feerates` `estimates` array shows fee estimates by blockcount from underlying plugin (usually *bcli*).
Changelog-Changed: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) value *slow* is now 100 block-estimate, not half of 100-block estimate.
Changelog-Deprecated: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) expressed as, "delayed_to_us", "htlc_resolution", "max_acceptable" or "min_acceptable". Use explicit block counts or *slow*/*normal*/*urgent*/*minimum*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we're messing with feerates, it's good to test this directly upfront.
Also, fix documentation!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out the two bcli replacements I checked (`sauron` and
`trustedcoin`) don't even implement this, and the multiplier makes
more sense in lightningd, especially as we move to bcli just providing
raw feerate estimates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are cases (difficult to reproduce with a test) where
a payment will fail one time and succeed later.
As far I understand in this case the groupid field of the payment
is the same, and the only thing that change is the status, so
our logic inside the delpay is ambiguous where it is not
possible to delete a payment as described in https://github.com/ElementsProject/lightning/issues/6114
A sequence of commands that explain the problem is
```
$ lc -k listpays payment_hash=H
{
"pays": [
{
"bolt11": "I",
"destination": "redacted",
"payment_hash": "H",
"status": "complete",
"created_at": redacted,
"completed_at": redacted,
"preimage": "P",
"amount_msat": "redacted",
"amount_sent_msat": "redacted"
}
]
}
$ lc delpay H complete
{
"code": 211,
"message": "Payment with hash H has failed status but it should be complete"
}
```
In this case, the delpay is not able to delete a payment because the
listpays is returning only the succeeded one, so by running the
listsendpays we may see the following result where our delpay logic
will be stuck because it works to ensure that all the payments stored
in the database has the status specified by the user
```
➜ VincentSSD clightning --testnet listsendpays -k payment_hash=7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4
{
"payments": [
{
"id": 322,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 1,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 1664,
"created_at": 1679510203,
"completed_at": 1679510205,
"status": "failed",
"bolt11": "lntb1pjpkj4xsp52trda39rfpe7qtqahx8jjplhnj3tatxy8rh6sc6afgvmdz7n0llspp50lr5hmdm0re0xvcp2hv3nf2wwvx0r8q3h3e7jmqz0awdfg6w206qdp0w3jhxarfdenjqargv5sxgetvwpshjgrzw4njqun9wphhyaqxqyjw5qcqp2rzjqtp28uqy77te96ylt7ek703h4ayldljsf8rnlztgf3p8mg7pd0qzwf8a3yqqpdqqqyqqqqt2qqqqqqgqqc9qxpqysgqgeya2lguaj6sflc4hx2d89jvah8mw9uax4j77d8rzkut3rkm0554x37fc7gy92ws9l76yprdva2lalrs7fqjp9lcx40zuty8gca0g5spme3dup"
},
{
"id": 323,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 2,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 3663,
"created_at": 1679510205,
"completed_at": 1679510207,
"status": "failed"
},
{
"id": 324,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 3,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 3663,
"created_at": 1679510207,
"completed_at": 1679510209,
"status": "failed"
},
{
"id": 325,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 4,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 4663,
"created_at": 1679510209,
"completed_at": 1679510221,
"status": "complete",
"payment_preimage": "43f746f2d28d4902489cbde9b3b8f3d04db5db7e973f8a55b7229ce774bf33a7"
}
]
}
```
This commit solves the problem by forcing the delete query in the
database to specify status too, and work around this kind of
ambiguous case.
Fixes: f52ff07558 (lightningd: allow delpay to delete a specific payment.)
Reported-by: Antoine Poinsot <darosior@protonmail.com>
Link: https://github.com/ElementsProject/lightning/issues/6114
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Co-Developed-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: delpay be more pedantic about delete logic by allowing
delete payments by status directly on the database.
For example, if we use -fsanitize=undefined, we can't do unaligned
integer access, but since we didn't test with the sanitizer flags, we
didn't know this, and set `HAVE_UNALIGNED_ACCESS=1`.
Also, add -fno-sanitize-recover= in developer mode, so we actually
fail binaries if something is detected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have 3 personas:
- Users
- Developers
- Maintainers
The first one basically cover the installation documentation. The
latter two are sorted into the "Developer" category, and the reference
category serves as a quick lookup for facts on anything CLN related.
Changelog-Added: JSON-RPC: `listclosedchannels` to show old, dead channels we previously had with peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
PSBTv2 support is quite low in the ecosystem, so having a call to convert
log messages and the like should be useful since they'll often be in v2.
Changelog-Added: Added setpsbtversion RPC to aid debugging and compatibility
1. Don't refer to obsolete send_invoice flag.
2. Don't refer to obsolete quantity_min field.
3. Don't refer to unsigned vs signed offers: they're all unsigned.
4. Add references to invoicerequest(7).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As reported on Discord, these are undocumented. And thus, um, hard to find!
Reported-by: Aaron Barnard
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These were deprecated in v0.12.0, hence scheduled for removal next version anyway
(use local_fund_msat and remote_funds_msat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's not spec-final yet (hell, it's not even properly specified
yet!) we need to put it behind an experimental flag.
Unfortunately, we don't have support for doing this in a plugin; a
plugin must present features before parsing options. So we need to do
it in core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Though there's already a `createinvoice` command, there are usecases where a
user may want to sign an invoice that they don't yet have the preimage to. For
example, they may have an htlc_accepted plugin that pays to obtain the preimage
from someone else and returns a `{ "result": "resolve", ... }`.
This RPC command addresses this usecase without overly complicating the
semantics of the existing `createinvoice` command.
Changelog-Added: JSON-RPC: `signinvoice` new command to sign BOLT11
invoices.
The existing description is incorrect. `createinvoice` doesn't actually
work when supplied with a custom-encoded bolt11 invoice without the
final 520 signature bits appended. If a users tries to do so, some of
their tagged fields will be incorrectly truncated.
`createinvoice` actually expects that the signatures are there, and it
simply ignores them.
See common/bolt11.c's bolt11_decode_nosig:
/* BOLT #11:
*
* The data part of a Lightning invoice consists of multiple sections:
*
* 1. `timestamp`: seconds-since-1970 (35 bits, big-endian)
* 1. zero or more tagged parts
* 1. `signature`: Bitcoin-style signature of above (520 bits)
*/
if (!pull_uint(&hu5, &data, &data_len, &b11->timestamp, 35))
return decode_fail(b11, fail, "Can't get 35-bit timestamp");
> while (data_len > 520 / 5) {
const char *problem = NULL;
u64 type, data_length;
v2 opens require you to use native segwit inputs
Changelog-Added: JSONRPC: `upgradewallet` command, sweeps all p2sh-wrapped outputs to a native segwit output
We need to be able to only use non-wrapped inputs for v2/interactive tx
protocol.
Changelog-Added: JSONRPC: `fundpsbt` option `nonwrapped` filters out p2sh wrapped inputs
I noticed that our subtables were not being cleaned, despite being "ON
DELETE CASCADE". This is because foreign keys were not enabled, but
then I got foreign key errors: rowid cannot be a foreign key anyway!
So create a real "rowid" column. We want "ON DELETE CASCADE" for
nodes and channels (and other tables in future) where we update
partially.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There were cases where address it's empty, and this cases are not right if the
field is considered optional.
This makes it required and add the field also when `--offline` is set.
Changelog-Changed: JSON-RPC: `getinfo` `address` array is always present (though may be empty)
Changelog-None
The sections on SQLite Litestream, sqlite3 .dump and VACUUM INTO commands
were to be removed six months after 0.10.3, due to issues observed in #4857.
We now recommend using --wallet=sqlite3://${main}:${backup} instead.
Also, put the "added" lines in the request schemas for new commands:
this doesn't do anything (yet?) but it keeps `make schema-added-check` happy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
