Changelog-Fixed: The documentation version was calculated as `pre-v24.08` for point releases like v24.08.1` also because `CLN_NEXT_VERSION` has not been included in the point release branches. Updating the script to build documentation on new tags and change the version to `pre-cln-next-version` for non-tagged commits.
Changelog-Added: JSON-RPC: `decode` now used modern BOLT 4 language for blinded paths, `first_path_key`.
Changelog-Deprecated: JSON-RPC: `decode` `blinding` in blinded path: use `first_path_key`.
Changelog-Added: Plugins: `onion_message_recv` and `onion_message_recv_secret` hooks now used modern BOLT 4 language for blinded paths, `first_path_key`.
Changelog-Deprecated: JSON-RPC: `onion_message_recv` and `onion_message_recv_secret` hooks `blinding` in blinded path: use `first_path_key`.
No code changes, just catching up with the BOLT changes which rework our
blinded path terminology (for the better!).
Another patch will sweep the rest of our internal names, this tries only to
make things compile and fix up the BOLT quotes.
1. Inside payload: current_blinding_point -> current_path_key
2. Inside update_add_htlc TLV: blinding_point -> blinded_path
3. Inside blinded_path: blinding -> first_path_key
4. Inside onion_message: blinding -> path_key.
5. Inside encrypted_data_tlv: next_blinding_override -> next_path_key_override
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is obsolete (since modern onions) and so removed from spec.
We should not set it, and don't need to handle it specially.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we should support it by default.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: `option_quiesce` enabled by default.
Changelog-Deprecated: Config: --experimental-quiesce: it's now the default.
We build with this: it changes the blinded_path field to sciddir_or_pubkey.
But it wasn't committed, so if someone rebuilt the wire files they'd be wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we know the total reservations on each hop, we can more easily
determine probabilities than using flowset_probability() which has to
replicate this collision detection.
We leave both in place for now, to check. The results are not
identical, due to slightly different calculation methods.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were trying to get the max capacity of a flow to see if we could add some
more sats, and hit an assertion:
tests/test_askrene.py:707:
```
DEBUG plugin-cln-askrene: notify msg info: Flow reduced to deliver 88070161msat not 90008000msat, because 107x1x0/1 has remaining capacity 88071042msat
DEBUG plugin-cln-askrene: notify msg info: Flow reduced to deliver 284138158msat not 284787000msat, because 108x1x0/1 has remaining capacity 284141000msat
**BROKEN** plugin-cln-askrene: Flow delivers 129565000msat but max only 56506138msat
INFO plugin-cln-askrene: Killing plugin: exited during normal operation
```
We need to *unreserve* our flow before asking for max capacity. We were
also missing a few less important cases where we altered flows without altering
the reservation, so fix those too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed that increasing mu a little bit sometimes made a big difference,
because by completely ignoring fees we were choosing the worst of two channels
in some cases.
Start at 1% fees; this saves a lot on initial fees in this test!
Here's the new stats on mu levels:
96 mu=1
90 mu=10
41 mu=20
30 mu=30
24 mu=40
19 mu=50
22 mu=60
8 mu=70
95 mu=80
19 mu=90
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `askrene` is now better at finding low-fee paths.
While the `k=8` value worked for the current main network tests with the
amounts in those tests, it wasn't robust across a wider range of values
(as demonstrated when other test changes broke tests!).
Time to do this properly: calculate the ratio at the time we combine them,
using median values.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even after the previous fix, we still occasionally increase fees when my increases.
This is due to the difference between MCF's linear fees, and actual fees, and
is unavoidable, but add a check if it somehow happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed this in the logs:
plugin-cln-askrene: notify msg unusual: The flows had a fee of 151950msat, greater than max of 53697msat, retrying with mu of 10%...
plugin-cln-askrene: notify msg unusual: The flows had a fee of 220126msat, greater than max of 53697msat, retrying with mu of 20%...
We would expect increasing mu to *reduce* the fee!
Turns out that our linear fee is a bad terrible approximation, because I
was using base_fee_penalty of 10.0.
|
| / __ <- real fee, with base: fee = base + propfee * amount.
| / __/
| _//
| __/
| __/_/
|/ _/
| _/ <- linearized fee: fee = linear * amount
|/
+-----------------------------------
These cross over where linear = propfee + base / amount. Assume we split the
payment into 10 parts, this implies that the base_fee_penalty should be 10 / amount
(this gives a slight penalty to the normal case, but that's ok).
This gives better results, too: we get down to 650099 sats in fees, vs 801613
before.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
During "test_real_data", then only successes with reduced fees were 92 on "mu=10", and only
1 on "mu=30": the rest went to mu=100 and failed.
I tried numerous approaches, and in the end, opted for the simplest:
The typical range of probability costs looks likes:
min = 0, max = 924196240, mean = 10509.4, stddev = 1.9e+06
The typical range of linear fee costs looks like:
min = 0, max = 101000000, mean = 81894.6, stddev = 2.6e+06
This implies a k factor of 8 makes the two comparable.
This makes the two numbers comparable, and thus makes "mu" much more
effective. Here are the number of different mu values we succeeded at:
87 mu=0
90 mu=10
42 mu=20
24 mu=30
17 mu=40
19 mu=50
19 mu=60
11 mu=70
95 mu=80
19 mu=90
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current prob_cost_factor setting does not seem to make mu very
effective, in fact, it gives strange results:
plugin-cln-askrene: notify msg unusual: The flows had a fee of 151950msat, greater than max of 53697msat, retrying with mu of 10%...
plugin-cln-askrene: notify msg unusual: The flows had a fee of 220126msat, greater than max of 53697msat, retrying with mu of 20%...
We would expect increasing mu to *reduce* the fee!
As a first step, simplify (it can't be infinite, and the -1 are weird).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We ask it again, but reduce fees by 1msat from the previous answer.
This is really nasty, as it frequently exercises the case where we
only go over fee when we do the refinement step.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tested with a really large gossmap (hacked to be 4GB), and when we
keep retrying to minimize cost (calling minflow 11 times), and we
don't free tmpctx.
Due to an issue with how gossmap estimates the index sizes, we ended
up running out of memory. This fixes it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Flow cycles can occur if we have arc zero arc costs.
The previous path construction from the flow in the network assumed the
absence of such cycles and would enter an infinite loop if it hit one.
With his patch wee add cycle detection and removal during the path
construction phase.
Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Lagrang3 <lagrang3@protonmail.com>
Changelog-EXPERIMENTAL: `askrene` infinite loop fixed
This happens in the coming "real network" test!
We add fees and hit htlc_max, but don't have another flow to add to.
Rather than MCF again, we split the flow into two.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The fp16_t values are approximations (overestimate for htlc_max,
underestimate for htlc_min), so in the refinement step we should use
the exact values.
This also fixes a logic bug: flow_remaining_capacity returned the
total capacity, not the additional capacity!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `askrene` now honors exact htlc_maximum_msat limits.
In particular, this lets you find the exact htlc_maximum_msat/htlc_minimum_msat
values.
This means we actually create real channel_updates for local mods, which
requires a second "local" scratch region.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `getroutes` now applies `auto.sourcefree` layer in the order specified, so doesn't alter channels changed in later layers.
Rather than adding to the gossmap modifications directly, populate
the layer and have the normal layer application logic do it.
This is consistent when we query layers in the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And unify logging for better debugging.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `askrene` now has better logging, gives notifications of progress.
The "init_cupdate" message is for gossipd to tell lightningd about our *own* latest
channel_update messages, not the remote ones! The "remote_channel_update" message
is for messages from the peer.
This appeared as an occasional BROKEN message in CI:
```
**BROKEN** 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#4: gossipd gave us channel_update for channel in gossip_state CGOSSIP_NEED_PEER_SIGS
```
Where we had sent (and not received) announcement_signatures, and restarted: the peer had meanwhile
sent us their channel_announcement and channel_update.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: we could get confused on restart and not re-transmit our own channel_updates.
tmpctx may not get cleaned immediately, so the timeout (a child of
the struct early_peer at this point) can still outlast the conn.
Do the clearer thing, and explicitly free the timeout.
Changelog-Fixed: connectd: crash on erroneous timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Whenever we build without `make clean` first, this file gets
overwritten. It asks the user for input because it is not run with
`-f`. This causes the build to hang until the user inputs `y`.
Here is an example build:
```
$ make -j7 && sudo make install
CC: cc -DCLN_NEXT_VERSION="v24.08" -DPKGLIBEXECDIR="/usr/local/libexec/c-lightning" -DBINDIR="/usr/local/bin" -DPLUGINDIR="/usr/local/libexec/c-lightning/plugins" -DCCAN_TAL_NEVER_RETURN_NULL=1 -Wall -Wundef -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wold-style-definition -Werror -Wno-maybe-uninitialized -Wshadow=local -std=gnu11 -g -fstack-protector-strong -Og -I ccan -I external/libwally-core/include/ -I external/libwally-core/src/secp256k1/include/ -I external/jsmn/ -I external/libbacktrace/ -I external/gheap/ -I external/build-x86_64-linux-gnu/libbacktrace-build -I external/libsodium/src/libsodium/include -I external/libsodium/src/libsodium/include/sodium -I external/build-x86_64-linux-gnu/libsodium-build/src/libsodium/include -I . -I/usr/local/include -I/usr/include/postgresql -DSHACHAIN_BITS=48 -DJSMN_PARENT_LINKS -DCOMPAT_V052=1 -DCOMPAT_V060=1 -DCOMPAT_V061=1 -DCOMPAT_V062=1 -DCOMPAT_V070=1 -DCOMPAT_V072=1 -DCOMPAT_V073=1 -DCOMPAT_V080=1 -DCOMPAT_V081=1 -DCOMPAT_V082=1 -DCOMPAT_V090=1 -DCOMPAT_V0100=1 -DCOMPAT_V0121=1 -c -o
LD: cc -Og config.vars -Lexternal/build-x86_64-linux-gnu -lwallycore -lsecp256k1 -ljsmn -lbacktrace -lsodium -L/usr/local/include -lm -lsqlite3 -L/usr/lib/x86_64-linux-gnu -lpq -o
mv: replace 'tools/headerversions', overriding mode 0755 (rwxr-xr-x)? cc lightningd/test/run-check_node_announcement.c
cc lightningd/test/run-find_my_abspath.c
cc lightningd/test/run-invoice-select-inchan.c
cc lightningd/test/run-jsonrpc.c
cc lightningd/test/run-log_filter.c
cc lightningd/test/run-log-pruning.c
cc lightningd/test/run-shuffle_fds.c
ld lightningd/test/run-find_my_abspath
ld lightningd/test/run-log-pruning
ld lightningd/test/run-check_node_announcement
ld lightningd/test/run-log_filter
ld lightningd/test/run-jsonrpc
ld lightningd/test/run-shuffle_fds
ld lightningd/test/run-invoice-select-inchan
^Cmake: *** [tools/Makefile:16: tools/headerversions] Interrupt
```
One workaround is to just know that you need to enter `y` here.
But the best solution is probably to update the Makefile like so.
Changelog-None
Multiple places in the pay lifecycle depend on mods to be set. By
setting the mods directly after the first listpeerchannels call,
subsequent calls to listpeerchannels are avoided.
Changelog-Fixed: pay-plugin: only call listpeerchannels once during a
payment lifecycle.
