When we used to allow cmd to be NULL, we had to hand the plugin
everywhere. We no longer do.
1. Various jsonrpc_ functions no longer need the plugin arg.
2. send_outreq no longer needs a plugin arg.
3. The init function takes a command, not a plugin.
4. Remove command_deprecated_in_nocmd_ok.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is cleaner: everything can now be associated with a command
context.
You're supposed to eventually dispose of it using timer_complete().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids globals (and means memleak traverses the variables!): we
only change over the test plugin though, to avoid unnecessary churn.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can filter down to only the list* fields we need. In the case of a
node with 1M forwards, this reduces listforwards time from 5 seconds
to 4 seconds. It will also reduce memory consumption.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are really three subsystems: invoices, forwards and sendpays,
each of which has two variants we care about (successes and failures).
If we split the code that way, we can extract the core differences in
each of these cases and share most of the logic.
It's a bit awkward to iterate over each "subsystem" in the JSON
parameter sense, so we have some iteration code to do that where we
need to.
The result is going to be much easier to paginate!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to make this a more complex struct, so introducing a
new_clean_info() function unifies the code paths.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we can see the values in listconfigs, even if we haven't set
them yet.
In particular, we now see the following:
* autoclean-cycle.value_int=3600
* bitcoin-rpcclienttimeout.value_int=60
* bitcoin-retry-timeout.value_int=60
* funder-max-their-funding.value_str=4294967295sat
* funder-per-channel-min.value_str=10000sat
* funder-reserve-tank.value_str=0sat
* funder-fund-probability.value_int=100
Changelog-Changed: plugins: libplugin now shows plugin option default values (where they're non-trivial)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to pass through setconfig in check mode, then we need to have libplugin
add (and use!) a `check_only` parameter to all option setting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `check` `setconfig` on plugin options can now check the config value would be accepted.
While we are cleaning up the list forwards with the autoclean plugin we are
not taking into count the forward's payments with the status set to
`local_failed`. In this case, the forwards have no resolved
time because it was not resolved by us due to some local error.
So, this commit is fixing the auto clean plugin by allowing to delete
of the forwards with status set to local_failed by taking into count
the received_time, with the assumption that the received_time, in this case,
is equal to the resolved time (?)
Reported-by: @denis2342
Link: https://github.com/ElementsProject/lightning/issues/6058
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Fixed: plugin: autoclean: considerer the forwards with status
set to `local_failed`.
If we had two things to clean, we fired off two requests (eg.
listforwards and listinvoices) and both marked the timer as finished,
triggering an assert.
We already have a refcount for outstanding requests to avoid this
for e.g. outstanding del commands, so use it here too!
```
Jan 19 19:20:00 lightningd[748044]: autoclean: plugins/libplugin.c:445: timer_complete: Assertion `p->in_timer > 0' failed.
Jan 19 19:20:00 lightningd[748044]: autoclean: FATAL SIGNAL 6 (version v22.11.1)
Jan 19 19:20:00 lightningd[748044]: 0x562c388136e4 send_backtrace
Jan 19 19:20:00 lightningd[748044]: common/daemon.c:33
Jan 19 19:20:00 lightningd[748044]: 0x562c3881376c crashdump
Jan 19 19:20:00 lightningd[748044]: common/daemon.c:46
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0898d5f ???
Jan 19 19:20:00 lightningd[748044]: ./signal/../sysdeps/unix/sysv/linux/x86_64/sigaction.c:0
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0898ce1 __GI_raise
Jan 19 19:20:00 lightningd[748044]: ../sysdeps/unix/sysv/linux/raise.c:51
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0882536 __GI_abort
Jan 19 19:20:00 lightningd[748044]: ./stdlib/abort.c:79
Jan 19 19:20:00 lightningd[748044]: 0x7f26d088240e __assert_fail_base
Jan 19 19:20:00 lightningd[748044]: ./assert/assert.c:92
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0891661 __GI___assert_fail
Jan 19 19:20:00 lightningd[748044]: ./assert/assert.c:101
Jan 19 19:20:00 lightningd[748044]: 0x562c3880355d timer_complete
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:445
Jan 19 19:20:00 lightningd[748044]: 0x562c38800b54 clean_finished
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:122
Jan 19 19:20:00 lightningd[748044]: 0x562c388010ed clean_finished_one
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:132
Jan 19 19:20:00 lightningd[748044]: 0x562c388011b6 del_done
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:149
Jan 19 19:20:00 lightningd[748044]: 0x562c388058b5 handle_rpc_reply
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:768
Jan 19 19:20:00 lightningd[748044]: 0x562c38805a39 rpc_read_response_one
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:944
Jan 19 19:20:00 lightningd[748044]: 0x562c38805ad7 rpc_conn_read_response
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:968
Jan 19 19:20:00 lightningd[748044]: 0x562c38876b60 next_plan
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/io.c:59
Jan 19 19:20:00 lightningd[748044]: 0x562c38876fe7 do_plan
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/io.c:407
Jan 19 19:20:00 lightningd[748044]: 0x562c38877080 io_ready
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/io.c:417
Jan 19 19:20:00 lightningd[748044]: 0x562c3887823c io_loop
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/poll.c:453
Jan 19 19:20:00 lightningd[748044]: 0x562c38805d11 plugin_main
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:1801
Jan 19 19:20:00 lightningd[748044]: 0x562c38801c7a main
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:613
```
Fixes: #5912
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only incremented this if it was the wrong state.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `autoclean-once` response `uncleaned` count is now correct.
The autoclean plugin would assume we have a `resolved_time` which may
not be true for oldish nodes that predate our annotations.
Changelog-None Unreleased change
Reported-by: <@devastgh>
This is actually what the autoclean plugin wants, especially since
you can't otherwise delete a payment which has failed then succeeded.
But insist on neither or both being specified, at least for now.
Changelog-Added: JSON-RPC: `delpay` takes optional `groupid` and `partid` parameters to specify exactly what payment to delete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previous commit was a hack which *always* batched where possible, this
is a more sophisticated opt-in varaint, with a timeout sanity check.
Final performance for cleaning up 1M pays/forwards/invoices:
```
$ time l1-cli autoclean-once succeededpays 1
{
"autoclean": {
"succeededpays": {
"cleaned": 1000000,
"uncleaned": 26895
}
}
}
real 6m9.828s
user 0m0.003s
sys 0m0.001s
$ time l2-cli autoclean-once succeededforwards 1
{
"autoclean": {
"succeededforwards": {
"cleaned": 1000000,
"uncleaned": 40
}
}
}
real 3m20.789s
user 0m0.004s
sys 0m0.001s
$ time l3-cli autoclean-once paidinvoices 1
{
"autoclean": {
"paidinvoices": {
"cleaned": 1000000,
"uncleaned": 0
}
}
}
real 6m47.941s
user 0m0.001s
sys 0m0.000s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `batching` command to allow database transactions to cross multiple back-to-back JSON commands.
It's more natural: we will eventually support dynamic config variables,
so this will be quite nice.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `autoclean` can now delete old forwards, payments, and invoices automatically.
And take the opportunity to rename l0 and l1 in the tests to the
more natural l1 l2 (since we add l3).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is hard to parse, and not extensible in future, and disagrees with
the man page (and caught by schema).
Technically this is an API break, but it can't be done neatly anyway
and it's unlikely someone is relying on this today :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSONRPC: `autocleaninvoice` now returns an object, not a raw string.
Changelog-Fixed: plugin: `bcli` no longer logs a harmless warning about being unable to connect to the JSON-RPC interface.
Changelog-Added: plugin: Plugins can opt out of having an RPC connection automatically initialized on startup.
The autocleaning will only happen if the autocleaninvoice-cycle startup
option is passed, which cannot happen if the plugin is started
post-startup.
Thus, it's less misleading for users to restrict its usage to startup.
Changelog-Added: plugins: The `autoclean` plugin is now static (you cannot manage it with the `plugin` RPC command anymore).
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
We don't take the callback result into account, so it can better be void.
Having a general callback parameter is handy, because for bcli we want
to pass it the struct bcli.
This adds helpers to start and send a jsonrpc request using json_stream
in order to benefit from the helpers.
This then simplifies existing plugins RPC requests by using json_stream
helpers.
