Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually were waiting for l3 to disconnect, not l2.
But in general we should be looking for status rather than grovelling
in the logs where possible, so I changed all those.
```
2021-08-17T04:40:34.9015538Z # l2 leases a channel from l3
2021-08-17T04:40:34.9016520Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9017570Z rates = l2.rpc.dev_queryrates(l3.info['id'], amount, amount)
2021-08-17T04:40:34.9018724Z l3.daemon.wait_for_log('disconnect')
2021-08-17T04:40:34.9019851Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9021467Z l2.rpc.fundchannel(l3.info['id'], amount, request_amt=amount,
2021-08-17T04:40:34.9022865Z feerate='{}perkw'.format(feerate), minconf=0,
2021-08-17T04:40:34.9024000Z > compact_lease=rates['compact_lease'])
...
2021-08-17T04:40:34.9103422Z > raise RpcError(method, payload, resp['error'])
2021-08-17T04:40:34.9106829Z E pyln.client.lightning.RpcError: RPC call failed: method: fundchannel, payload: {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'amount': 500000, 'feerate': '2000perkw', 'announce': True, 'minconf': 0, 'request_amt': 500000, 'compact_lease': '029a00640064000000644c4b40'}, error: {'code': 400, 'message': 'Unable to connect, no address known for peer', 'data': {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'method': 'connect'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fail waiting for 'Resolved OUR_UNILATERAL/DELAYED_OUTPUT_TO_US by our proposal OUR_DELAYED_RETURN_TO_WALLET'
because we close *two* channels, but only wait for one transaction before mining a block.
This means we might only have one, and we immediately mine the next wait_for_mempool=1,
so the OUR_DELAYED_RETURN_TO_WALLET isn't mined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If l3 is too slow, it can get channel_announcement after channel
is closed, so it gets upset at the node_announcement which follows:
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Updated pending announce with update 103x1x1/1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: channel_announcement: no unspent txout 103x1x1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_NODE_ANNOUNCEMENT before announcement 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now use 'compact_lease' to gate an open (if the rates have
changed, we fail), we no longer need to rely on query rates for figuring
things out, so we make it dev-only.
Changelog-Changed: JSON-API: queryrates is now developer only
We were actually using the last commit tx's size, since we were
setting it in lightningd. Instead, hand the min and desired feerates
to closingd, and (as it knows the weight of the closing tx), and have
it start negotiation from there.
This can be significantly less when anchor outputs are enabled: for
example in test_closing.py, the commit tx weight is 1124 Sipa, the
close is 672 Sipa!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: Use a more accurate fee for mutual close negotiation.
We set amounts to a list, but then don't use the values except
as a boolean.
Make it a boolean, which should also speed the test up!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us transition (with a few supporting changes) to closingd,
which will happily let them mutual close with us.
We already handle the case where this mutual close is redundant (for
packet loss), so this is easy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We will now reestablish and negotiate mutual close on channels we've already closed (great if peer has lost their database).
In particular, if one side sees the final CLOSING_SIGNED and the other
doesn't, we won't talk when it reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
This was turned by at random by CI:
1. Alice has sent shutdown, but it still waiting for revoke_and_ack.
2. Bob has sent and received shutdown, and sent revoke_and_ack,
so it considers it time for signature exchange.
3. Disconnect before Alice received revoke_and_ack.
4. Reconnect, Bob is in closingd, which doesn't rexmit revoke_and_ack.
5. Timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily rename old getroute to getrouteold (we will remove this).
Changelog-Changed: JSON-RPC: `getroute` is now implemented in a plugin.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, sending a v1 address (or, in fact, any random crap!)
would cause the unsupporting node to unilaterally close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes anysegwit and the updated HTLC tiebreak test vector. It
also adds explicit wording for invalid per_commitment_secret (which
nicely matches our code already!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't always get two transactions on line 1019; the comment is
confused (only one penalty tx successfully comes out of l3). So make
sure we get the other transactions when we expect them, and then
make this test more specific.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec doesn't say to do this, but it makes sense, otherwise
they'll never be able to mutually close the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we turned many errors into warnings, we want our tests to fail
when they happen unexpectedly. We make WARNING clear in the strings
we print, too, to help out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The test was not considering that concurrent sendrawtx of the same tx
is not stable, and either endpoint will submit it first. Now just
checking state transitions and the mempool.
We also make the logic a bit nicer to read. The failure was due to
more than one status message being present if we look at the wrong
time:
```
arr = ['CLOSINGD_SIGEXCHANGE:We agreed on a closing fee of 20334 satoshi for tx:17f1e9d377840edf79d8b6f1ed0faba59bb307463461...9b98', 'CLOSINGD_SIGEXCHANGE:Waiting for another closing fee offer: ours was 20334 satoshi, theirs was 20332 satoshi,'] │
def only_one(arr):
"""Many JSON RPC calls return an array; often we only expect a single entry
"""
> assert len(arr) == 1
E AssertionError
```
We weren't waiting for the transactions to enter the mempool which
could cause all of our fine-tuned block counts to be off. Now just
waiting for the expected number of txs.
For compatibility, we only do this if `allow-deprecated-apis` is false
for now. Otherwise scripts parsing should use `grep -v '^# '` or
start using `-N none`.
Changelog-Added: JSON-RPC: `close` now sends notifications for slow closes (if `allow-deprecated-apis`=false)
Changelog-Deprecated: cli: scripts should filter out '^# ' or use `-N none`, as commands will start returning notifications soon
Fixes: #3925
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're rarely in a hurry here, and bitcoind is aggressive with fees.
You can always spend this output if you really have to, using CPFP.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: mutual closing feerate reduced to "slow" to avoid overpaying.
lightning-5 can sometimes see itself sweeping the unilateral output resulting
in this weird line:
```log
HTLC already resolved by SELF when we found preimage
```
