We don't actually support it yet, but this threads through the type change,
puts it in "decode" etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Callers were supposed to call "tlv_fields_valid" after fromwire_tlv,
but few did. Make this the default, and call the underlying function
directly where we want to be more flexible (one place).
This loses the ability to allow misordered fields, or to pass through
*any* even fields. We restore that for special cases in the next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We already do some sanity checks, add this one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: invalid UTF-8 strings now rejected.
The jsmn parser is a beautiful piece of code. In particular, you can parse
part of a string, then continue where you left off.
We don't take advantage of this, however, meaning for large JSON objects
we parse them multiple times before finally having enough to complete.
Expose the parser state and tokens through the API, so the caller can pass
them in repeatedly. For the moment, every caller is allocates each time
(except the unit tests).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to change the API on the more complete JSON parser, so
make and use a simple API for the easy cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Replace `json_to_double()` (which uses `strtod(3)`) with our own
floating-point parsing function `json_to_millionths()` that
specifically expects to receive such a number that can fit in a
64 bit integer after being multiplied by 1 million.
The main piece of the code in this patch comes from
https://github.com/ElementsProject/lightning/pull/3535#discussion_r381041419
Changelog-None
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
jsmn would accept invalid JSON objects. This is bad because it would
set ->size incorrectly: we expect to have at least size * 2 tokens (in
pairs). We want to rely on ->size, but this would create an exploitable
buffer overflow!
Fortunately, this is fixed upstream, so we add a test and upgrade to v1.0.0.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The external/jsmn/README.md only says:
int size; // Number of child (nested) tokens
But it only counts *direct* children, or *direct* members for an object.
This test verifies this (the bug proved to be elsewhere: see next patch!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was removed (as unused) in 6269a4c55d592e8720b7f2a304c21f61f7931238;
now I've even added tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_tok* is used with 'struct command', so rename this to match the other
low-level json tok helpers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
It turns out we were heavily relying on the fact that after each message from
the client there'd be a flush, and that there would not be anything after the
JSON object we read. This will no longer be the case once we start streaming
things or we are very quick in issuing the JSON-RPC requests.
This just takes one of the error paths (incomplete read) and makes it into a
successful path if we have indeed read a full root element.
Just a small cleanup of the indentation code, so we don't have to reformat all
the issue reports to become readable. This is much closer to what `jq` or
`json_pp` spit out and doesn't have those infinitely long lines.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
