It's an internal difference, so doesn't actually break compatibility
(it would if we tried to prove we owned an old invoicerequest, but we
don't have infrastructure for that anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For now we only use a fake id for requesting invoices (as a payer_key), but we
will eventually use this generically, and we want plugins to be able to map them
too, so use the same scheme as path_id: a generated secret using the makesecret
API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
invoice_path_id is actually a generic path_id thing, so rename it.
We're going to use the same scheme for path secrets and the tweak to
node_id when we create a fake pubkey for invoice_requests, so a new
header is appropriate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We wire through --dev options into the hsmd, and test preapprove accept and deby
with both old and new protocols.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This has the benefit of being shorter, as well as more reliable (you
will get a link error if we can't print it, not a runtime one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We still want to test non-anchor channels, as we still support them, but
we've made it non-experimental. To test non-anchor channels, we
use dev-force-features: -23.
Changelog-Added: Protocol: `option_anchors_zero_fee_htlc_tx` enabled, no longer experimental.
Changelog-Changed: Config: `experimental-anchors` now does nothing (it's enabled by default).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_options__make_anchors_enabled_by_default,_ignore_experimental-anchors.patch':
fixup! options: make anchors enabled by default, ignore experimental-anchors.
This makes `check` much more thorough, and useful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `check` now does much more checking on every command (not just basic parameter types).
I obviously like the word "capabilities" since I reused it to refer
to the HSM's overall features :(
Suggested-by: @ksedgwic
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
At the moment only lightingd needs it, and this avoids missing any
places where we do bip32 derivation.
This uses a hsm capability to mean we're backwards compatible with older
hsmds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now always double-check bitcoin addresses are correct (no memory errors!) before issuing them.
Importantly, adds the version number at the *front* to help future
parsing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fix-hsm-check-pubkey.patch':
fixup! hsmd: capability addition: ability to check pubkeys.
We were handing 3 to hsmd (and Ken added that in 7b2c5617c1,
so I guess he's OK with that being the minimum supported version!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The "path" is just a message to ourselves. This meets the minimal
requirement for bolt12 invoices: that there be a blinded path (at
least so we can use the path_id inside in place of "payment_secret").
We expose the method to make this path_id to a common routine: offers
will need this for generating more sophisticated paths.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the one place where we hand point32 over the wire internally, so
remove it.
This is also our first hsm version change!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With the rise of external HSMs like VLS, this is no longer an
internal-only API. Fortunately, it doesn't change very fast so
maintenance should not be a huge burden.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Most unexpected ones are still 1, but there are a few recognizable error codes
worth documenting.
Rename the HSM ones to put ERRCODE_ at the front, since we have non-HSM ones
too now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was introduced to allow creating a shared secret, but it's better to use
makesecret which creates unique secrets. getsharedsecret being a generic ECDH
function allows the caller to initiate conversations as if it was us; this
is generally OK, since we don't allow untrusted API access, but the commando
plugin had to blacklist this for read-only runes explicitly.
Since @ZmnSCPxj never ended up using this after introducing it, simply
remove it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSONRPC: `getsharedsecret` API: use `makesecret`
Also has to fix up tests.
Changelog-Fixed: cli doesn't required anymore to confirm the password if the `hsm_secret` is already encrypted.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Suggested-by: Rusty Russell
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Changed: Support hsm specific error error code in lightning-cli
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We put this in reply paths, so we can tell if they are used. This lets us
avoid responding unless the correct reply path is used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes use of the constant defined in the previous commits to more
accurately detect plaintext, encrypted, and invalid seeds. We now error
on invalid seeds.
Changelog-changed: hsmd: we now error at startup on invalid hsm_secret
Changelog-changed: hsmtool: all commands now error on invalid hsm_secret
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Invoices are signed with our own key, but we use a transient payer_key with a
tweak for invoice_requests (and refunds).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to use the hsm for a migration, so we need to set up the HSM
before we get to the wallet migration code.
All that this requires is removing the places in HSM init that we touch
the database struct -- easy enough to accomplish by passing the required
field back out from init, and then associating it onto the wallet after
it's been initialized.
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ChangeLog-Added: New `getsharedsecret` command, which lets you compute a shared secret with this node knowing only a public point. This implements the BOLT standard of hashing the ECDH point, and is incompatible with ECIES.
