If we're opening a channel with a peer which support anchors (and
we do), we tell fundpsbt/utxopsbt to enforce the emergency reserve;
this matters, as it doesn't know about the channel yet, and thus
won't (if it's our first anchor channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `fundchannel` and `multifundchannel` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (or are opening one).
This is needed when we know we're *opening* an anchor channel, to
override the "do we already have an anchor channel open?" logic.
Also, document the nonwrapped arg added in v23.02.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundpsbt` and `utxopsbt` new parameter `opening_anchor_channel` so lightningd knowns it needs emergency reserve for anchors.
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
It depends on whether we negotiated anchors: just document that this
field doesn't apply for anchors (it becomes zero by the end of this
patch series, which is weird).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Do it slightly intelligently, so if we had set previously using setconfig
we don't keep appending new ones, but replace it in-place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only implemented for min-capacity-sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `setconfig` allows a limited number of configuration settings to be changed without restart.
To test, we do min-capacity-sat which is simple. We also update the
listconfigs man page which contained some obsolete information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When core lightning is asking the information about
the blockchain with `getchaininfo` command lightningd
know already the information about the min and max block height.
the problem is when we have a smarter Bitcoin backend that is able
to switch between different clients in some cases is helpful
give the information about current known height by lightningd and
pass it down to the plugin.
In this way, the plugin knows what is the correct known height from lightnind, and can
try to fix some problems if any exit.
This is particularly useful when you are syncing a new backend from scratch
like https://github.com/cloudhead/nakamoto and we avoid returning the
lower height from the known, and avoid the crash of core lightning.
With this information, the plugin can start to sync the chain and return
the answer back only when the chain is in sync with the current status of
lightningd.
Another reason to add this field and not wait the correct block in core
lightning itself is because Bitcoin Core is extremely slow to sync up,
so the question here is, how long should we wait? The time depends
on various factors.
With this approach of informing the plugin about the height, in some cases,
you can start the syncing but move the execution to another backend until
the previous one is ready.
The problem I want to solve is that I don't want to be left in the dark when
we run `getchaininfo`, and I want to have the opportunity to wait for
the blockchain sync or decide to dispatch the request elsewhere.
Changelog-Added: Pass the current known block height down to the getchaininfo call.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This PR:
- adds all the guides (in markdown format) that is published at https://docs.corelightning.org/docs
- adds a github workflow to sync any future changes made to files inside the guides folder
- does not include API reference (json-rpc commands). Those will be handled in a separate PR since they're used as manpages and will require a different github workflow
Note that the guides do not exactly map to their related files in doc/, since we reorganized the overall documentation structure on readme for better readability and developer experience. For example, doc/FUZZING.md and doc/HACKING.md#Testing are merged into testing.md in the new docs. As on the creation date of this PR, content from each of the legacy documents has been synced with the new docs. Until this PR gets merged, I will continue to push any updates made to the legacy documents into the new docs.
If this looks reasonable, I will add a separate PR to clean up the legacy documents from doc/ (or mark them deprecated) to avoid redundant upkeep and maintenance.
Changelog-None
We now know the base reference, and we've rebased, so we can do a
simple diff. Also, this means we can use a magic commit message
`No-schema-diff-check` to suppress false positives.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listconfigs` direct fields, use `configs` sub-object and `set`, `value_bool`, `value_str`, `value_int`, or `value_msat` fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use multi-specifiable options elsewhere, this is just another.
Otherwise you can't add, you can only set them all.
Changelog-Added: Config: `accept-htlc-tlv-type` (replaces awkward-to-use `accept-htlc-tlv-types`)
Changelog-Deprecated: Config: `accept-htlc-tlv-types` (use `accept-htlc-tlv-type` multiple times)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `default` no longer accepted on `flag` type parameters (it was silently ignored, so just don't set it).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listconfigs is convenient, but it doesn't handle multi-options well: it
outputs an object with duplicate fields in this case (e.g. log-file), nor
is it extensible to show more than raw values.
However, listconfigs doesn't do what other list commands do (use a
sub-object "configs") so we can put the new values under that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listconfigs` now has `configs` subobject with more information about each config option.
Developers, rejoice (we already have --testnet, --signet and --mainnet!).
Changelog-Added: Config: `--regtest` option as alias for `--network=regtest`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This obsoletes the use of --announce-addr-dns which I know Michael
didn't really like either.
Changelog-Deprecated: Config: `announce-addr-dns`; use `--bind-addr=dns:ADDR` for finer control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a major cleanup to how we parse addresses.
1. parse_wireaddr now supports the "dns:" prefix to support dns records (type 5).
2. We are less reliant on separate_address_and_port() which gets confused by
that colon.
3. We explicitly test every possible address type we can get back from
parsing, and handle them appropriately.
We update the documentation to use the clearer HOSTNAME vs DNS prefixes now
we also have `dns:` as a prefix.
Changelog-Added: Config: `bind` can now take `dns:` prefix to advertize DNS records.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Build: all experimental features are now runtime-enabled; no more ./configure --enable-experimental-features
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out this was accidentally changed for v0.10.1 in
d8e68893f5 where we made fee levels less
aggressive.
Oops. I guess we can fix the docs. And we now have "2blocks" if you
want it really fast!
Closes: #6129
Changelog-Fixed: JSON-RPC: `feerates` document correctly that urgent means 6 blocks (not 2), and give better feerate examples.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
mempool.info gives sat/vB, which is 1000 too low for us!
See-also: #6161 (complains setting feerate to 5 doesn't work)
See-also: #6129
Suggested-by: @lightingorb
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still need to actually make a rune when lightningd starts, as
commando (for safety) won't work unless you actually generate a rune
(that it knows of!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: hsmtool: `makerune` command to make a master rune for a node.
I tested this indeed breaks if we don't accept it, then implemented
the code to accept it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: protocol: We now correctly accept the `option_scid_alias` bit in `open_channel` `channel_type`.
Changelog-Deprecated: protocol: Not setting `option_scid_alias` in `option_channel` `channel_type` for unannounced channels.
Changelog-Added: JSON-RPC: `feerates`: added `floor` field for current minimum feerate bitcoind will accept
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `estimatefees` can return explicit `fee_floor` and `feerates` by block number.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
