We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Changelog-Added: Plugins: `htlc_accepted` now exposes the `short_channel_id` for the channel from which that HTLC is coming from and the low-level per-channel HTLC `id`, which are necessary for bridging two different Lightning Networks when MPP is involved.
When starting a plugin, if the plugin path cannot be found in
absolute context, assume it is a relative path to the default
plugins dir. As a result, the following now works when my_plugin.py
is installed in the default plugins dir:
lightning-cli plugin start my_plugin.py
Also update the plugin documentation to reflect that the use of a
relative path is now available.
Changelog-Added: plugin start RPC subcommand now assumes relative path to default plugins dir if the path is not found in absolute context. i.e. lightning-cli plugin start my_plugin.py
[ Squashed two commits into one -- RR ]
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
We call out to connectd to activate the peer, and while we do that,
channel->owner is NULL. A better pattern would be to set up the unsaved
channel once connectd has given us the peer, but this works for now.
Fixes: #5204
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems to prevent broad propagation, due to LND not allowing it. See
https://github.com/lightningnetwork/lnd/issues/6432
We still announce it if you disable deprecated-apis, so tests still work,
and hopefully we can enable it in future.
Fixes: #5196
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: disabled websocket announcement due to LND propagation issues
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds config and commandline options for htlc_min_msat, htlc_max_msat and
announce_discovered_ip. The default is 0msat for htlc_min_msat, unlimited for
htlc_max_msat and enabled for announce_discovered_ip.
The announce_discovered_ip gets the disable commandline switch --disable-ip-discovery
Changelog-added: Config options for htlc_min_msat, htlc_max_msat and announce_discovered_ip.
Makes types harder, and I've never personally used them.
Changelog-Deprecated: JSON-RPC: `invoice` `expiry` no longer allowed to be a string with suffix, use an integer number of seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this (send warnings) in almost all cases anyway, so mainly this
is a textual update, but there are some changes:
1. Send ERROR not WARNING if they send a malformed commitment secret.
2. Send WARNING not ERROR if they get the shutdown_scriptpubkey wrong (vs upfront)
3. Send WARNING not ERROR if they send a bad shutdown_scriptpubkey (e.g. p2pkh in future)
4. Rename some vars 'err' to 'warn' to make it clear we send a warning.
This means test_option_upfront_shutdown_script can be made reliable, too,
and it now warns and doesn't automatically close channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
Regenerate from current BOLTS via `make extract-bolt-csv`
1. The remote_addr field was added manually into peer_wire.csv: this
needs to be a patch otherwise it vanishes on regen.
2. We never brought into the channel_disabled fields, because it was
too much hassle (we never actually generate this!). Do it now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Gossipd didn't actually suppress all gossip, resulting in a flake!
Doing it in connectd now makes much more sense.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Partial revert of 43a833e405
"lightningd: remove support for legacy onion format."; we restore the
ability to decode legacy onions for forwarding, but not to generate them.
(We don't accept them properly since making payment_secret compulsory
anyway, so no real change there!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: ... but we still forward legacy HTLC onions for now.
These trip when anything weird happens; turns out that we tell
onchaind about old htlcs (e.g. for penalties), so in that case we can
actually have it tell us about missing HTLCs which we no longer have
in memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't actually fix anything, but may shed more clues if it
happens again.
The broken() logs are overzealous, see next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get some memleak reports because ld owns the subd, but once
the peer/channel is freed, there's no reference for the brief time
until the subd exits.
This happens for both opening and closingd. For openingd, the
peer owns it, for others (including dualopend) the channel owns it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
LNURL wants this so they can include images etc in descriptions.
Replaces: #4892
Changelog-Added: JSON-RPC: `invoice` has a new parameter `deschashonly` to put hash of description in bolt11.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Requiring the caller to allocate them is ugly, and differs from
other types.
This means we need a context arg if we don't have one already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more "towire_offer", but "towire_tlv_offer".
This means we double-up on the unfortunately-named `tlv_payload` inside
the onion, but we should rename that in the spec when we remove
old payloads.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this changes the name of a field in invoice_request:
`payer_signature` becomes simply `signature`. So we allow both for
now, and send the old one unless deprecated_apis is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also has to fix up tests.
Changelog-Fixed: cli doesn't required anymore to confirm the password if the `hsm_secret` is already encrypted.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Fixed: check if the pass and the confirmation pass match from the command line
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This avoids reuse which can cause confusion; the long-term fix is to
rewrite this to use real channels like dualfunding does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make sure it sees disconnect before reconnect, otherwise the next command
fails since we're now disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the address and direction as soon as it connects not just when
we're about to make it active: we want this even if we don't have
an active channel, or if the connect hook rejects it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
More efficient to search a known peer than the whole set.
Also, move find_channel_by_id() from channel_control.c into channel.c
where we'd expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Activate means a specific thing now (connectd said something), so avoid
confusing it with this function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Generally this means converting a lazy "peer_active_channel(peer)" call
into an explicit iteration.
1. notify_feerate_change: call all channels (ignores non-active ones anyway).
2. peer_get_owning_subd remove unused function.
3. peer_connected hook: don't save channel, do lookup and iterate channels.
4. In json_setchannelfee "all" remove useless call to peer_active_channel
since we check state anyway, and iterate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than intuiting whether this is a new channel / active channel,
use the channel_id. This simplifies things and makes them explicit,
and prepares for multiple live channels per peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means lightningd needs to create the temporary one and tell it to
openingd/dualopend, rather than the other way around.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would return success from connect even though the peer was closing;
this is technically correct but fairly undesirable. Better is to pass
every connect attempt to connectd, and have it block if the peer is
exiting (and retry), otherwise tell us it's already connected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
openingd currently holds the connection to idle peers, but we're about
to change that: it will only look after peers which are actively
opening a connection. We can start this process by disconnecting
whenever we have a negotiation failure.
We could stay connected if we wanted to, but that would be up to
connectd to decide. Right now it's easier if we disconnect from any
idle peer once it's been active.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The message from lightningd simply acknowleges that we are allowed to
discard the peer (because no subdaemons are talking to it anymore).
This difference becomes more stark once connectd holds on to idle
peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. The notification should be called every time.
2. channel can never be NULL, since it's tested above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `connect` notification now called even if we already have a live channel.
We currently intuit this by whether there's a subdaemon owning it.
But we're about to change the rules and allow connectd to hold idle
connections, so we need an explicit flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
We still use the channel hint here (as it's the only option), we just
warn about lack of capacity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to add some, since our internal representations of
htlc_maximum_msat round up, and we need to disable mpp which succeeds
in getting a payment through by splitting.
We also allow dev_routes to suppress invoice routehints altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Based on setchannelfee, but expanded to allow setting max htlc amount (and others
in future?).
The main differences:
1. It doesn't change values which are not specified (that would be hard to
add fields to!)
2. It says exactly what all values are in any potentially changed channels.
Changelog-Added: JSON-RPC: new `setchannel` command generalizes `setchannelfee`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to calculate it ourselves. Unfortunately this needs to
be done in several places, since new_channel() isn't used to fully
create a channel in the case of dual funding :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Things allocated by libwally all get the tal_name "wally_tal",
which cost me a few hours trying to find a leak.
In the case where we're making one of the allocations the parent
of the others (e.g. a wally_psbt), we can do better: supply a name
for the tal_wally_end().
So I add a new tal_wally_end_onto() which does the standard
tal_steal() trick, and also changes the (typechecked!) name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Instead of doing this weird chaining, just call them all at once and
use a reference counter.
To make it simpler, we return the subd_req so we can hang a destructor
off it which decrements after the request is complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For example, if you do:
```
./lightningd/lightningd --network=regtest --experimental-websocket-port=19846
```
Then you're trying to reuse the normal port as the websocket port, but this
only fails at *listen* time, when we activate connectd. Catch this too.
Fixes incorrect fatal() message, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was causing journal_entries to show up in the accountant plugin,
since we don't emit events for unconfirmed events until they're actually
confirmed onchain.
Useful for accounting for missed/historical channel opens, to figure out
what the actual sat contribution from each peer is at a utxo level
Changelog-Added: JSONRPC: `listpeers` now includes a `pushed_msat` value. For leased channels, is the total lease_fee.
Only shows up on delayed to us outputs, but nice to have anyway.
It's missing for channel index destined deposits, maybe nice to add at
some point in the future; right now you can figure out which close a
wallet deposit comes from via the channel close txid
There is no "wallet_lib_headers" variable in wallet/Makefile
Likewise, there were two "lightningd_headers", a couple of unused
variables and some other nonsene in lightningd/Makefile
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
If this field is missing for whatever reason (weird db state?)
clightning will crash when listing invoices.
Signed-off-by: William Casarin <jb55@jb55.com>
If we call update_channel_from_inflight *twice* with the same inflight, we
will get bad results. Using tal_steal() here was a premature optimization:
```
Valgrind error file: valgrind-errors.496395
==496395== Invalid read of size 8
==496395== at 0x22A9D3: to_tal_hdr (tal.c:174)
==496395== by 0x22B4B5: tal_steal_ (tal.c:498)
==496395== by 0x16A13D: update_channel_from_inflight (peer_control.c:1225)
==496395== by 0x16A4C7: funding_depth_cb (peer_control.c:1299)
==496395== by 0x182807: txw_fire (watch.c:232)
==496395== by 0x182AA9: watch_topology_changed (watch.c:300)
==496395== by 0x1290ED: updates_complete (chaintopology.c:624)
==496395== by 0x129BF4: get_new_block (chaintopology.c:835)
==496395== by 0x125EEF: getrawblockbyheight_callback (bitcoind.c:362)
==496395== by 0x176ECC: plugin_response_handle (plugin.c:584)
==496395== by 0x1770F5: plugin_read_json_one (plugin.c:690)
==496395== by 0x1772D9: plugin_read_json (plugin.c:735)
==496395== Address 0x89fbb08 is 24 bytes inside a block of size 104 free'd
==496395== at 0x483CA3F: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==496395== by 0x22B193: del_tree (tal.c:421)
==496395== by 0x22B461: tal_free (tal.c:486)
==496395== by 0x16A123: update_channel_from_inflight (peer_control.c:1223)
==496395== by 0x16A4C7: funding_depth_cb (peer_control.c:1299)
==496395== by 0x182807: txw_fire (watch.c:232)
==496395== by 0x182AA9: watch_topology_changed (watch.c:300)
==496395== by 0x1290ED: updates_complete (chaintopology.c:624)
==496395== by 0x129BF4: get_new_block (chaintopology.c:835)
==496395== by 0x125EEF: getrawblockbyheight_callback (bitcoind.c:362)
==496395== by 0x176ECC: plugin_response_handle (plugin.c:584)
==496395== by 0x1770F5: plugin_read_json_one (plugin.c:690)
==496395== Block was alloc'd at
==496395== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==496395== by 0x22AC1C: allocate (tal.c:250)
==496395== by 0x22B1DD: tal_alloc_ (tal.c:428)
==496395== by 0x22B3A6: tal_alloc_arr_ (tal.c:471)
==496395== by 0x22C094: tal_dup_ (tal.c:805)
==496395== by 0x12B274: new_inflight (channel.c:187)
==496395== by 0x136D4C: wallet_commit_channel (dual_open_control.c:1260)
==496395== by 0x13B084: handle_commit_received (dual_open_control.c:2839)
==496395== by 0x13B6AF: dual_opend_msg (dual_open_control.c:2976)
==496395== by 0x1809FF: sd_msg_read (subd.c:553)
==496395== by 0x218F5D: next_plan (io.c:59)
==496395== by 0x219B65: do_plan (io.c:407)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise we get weird effects, as htlcs are being freed:
```
2022-01-26T05:07:37.8774610Z lightningd-1: 2022-01-26T04:47:48.770Z DEBUG 030eeb52087b9dbb27b7aec79ca5249369f6ce7b20a5684ce38d9f4595a21c2fda-chan#8: Failing HTLC 18446744073709551615 due to peer death
2022-01-26T05:07:37.8775287Z lightningd-1: 2022-01-26T04:47:48.770Z **BROKEN** 030eeb52087b9dbb27b7aec79ca5249369f6ce7b20a5684ce38d9f4595a21c2fda-chan#8: Neither origin nor in?
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
We want to stream gossip through this, but currently connectd treats the
fd as synchronous. While we work on getting rid of that, it's easiest to
have two fds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Once we send funding_locked, gossipd could start seeing channel_updates
from the peer (which get sent so we can use the channel in routehints
even before it's announcable).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We also no longer strip the type off: everyone handles both forms, and
Eclair doesn't strip (and it's easier!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want it to keep the latest, so it can make its own error msgs without
asking us. This installs (but does not use!) the message handler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in preparation for gossipd feeding us the latest channel_updates,
rather than having lightningd and channeld query gossipd when it wants
to send an onion error with an update included.
This means gossipd will start telling us the updates, so we need the
channels loaded first.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fixes lightningd's chronic weight underestimate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: closingd: more accurate weight estimation helps mutual closing near min/max feerates.
If a coin move concerns an external account, it's really useful to know
which 'internal' account initiated the transfer.
We're about to add a notification for withdrawals, so we can use this to
track wallet pushes to outside addresses
Changelog-Added: JSONRPC: `coin_movement` to 'external' accounts now include an 'originating_account' field
lightningd would race with the subd destructor to do the waitpid(),
resulting in UNUSUAL log messages, but also us missing if a plugin
was killed via a signal.
We can also get rid of the gratuitous waitpid() in test_subdaemons.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
msg_queue was originally designed for inter-daemon comms, and so it has
a special mechanism to mark that we're trying to send an fd. Unfortunately,
a peer could also send such a message, confusing us!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's weird to have connectd ask gossipd, when lightningd can just do it
and hand all the addresses together.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually intercept the gossip_timestamp_filter, so the gossip_store
mechanism inside the per-peer daemon never kicks off for normal connections.
The gossipwith tool doesn't set OPT_GOSSIP_QUERIES, so it gets both, but
that only effects one place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As connectd handles more packets itself, or diverts them to/from gossipd,
it's the only place we can implement the dev_disconnect logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. tal_strndup(.., str, strlen(str)) == tal_strdup()
2. tal_strdup also takes(), so document that.
3. Avoid passing 'struct sha256' on the stack: use ptr.
4. Generally, structures shouldn't keep pointers to things they don't own.
In this case, mvt->node_id.
5. Make payment_hash a pointer, since NULL is more natural than an all-zero
hash.
And add NON_NULL_ARGS() to the functions; it's cumbersome, but make it
fairly clear what params are optional.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
