We used to create some p2sh-segwit addresses just to mix things up. This
streamlines back to just bech32.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The top of the file indicates the following errors:
#define NO_ERROR 0
#define ERROR_FROM_LIGHTNINGD 1
#define ERROR_TALKING_TO_LIGHTNINGD 2
#define ERROR_USAGE 3
But we didn't use the right one for opt_parse failure, and didn't use the
correct constants everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids any confusion between primitive and string ids, and in
particular stops an issue with commando once it starts chaining ids,
that weird ids can be double-escaped and commando will not recognize
the response, leaving the client hanging. It's the client's fault for
using a weird id, but it's still rude (and triggered by our tests!).
It also makes substituting the id in passthrough simpler, FTW.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: pyln: LightningRpc has new `reply_filter` context manager for reducing output of RPC commands.
We suppress schema reply checking when filter is set: we could just
remove all the `required` fields in the JSON schema.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using `listfowards` for this wrong; expose this directly if people
care (and unlike listforwards, which could be deleted, we have to
remember these while the channel is still open!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listhtlcs` new command to list all known HTLCS.
And document that we never know payment_hash.
Changelog-Added: JSON-RPC: `listforwards` now shows `in_htlc_id` and `out_htlc_id`
Changelog-Changed: JSON-RPC: `listforwards` now never shows `payment_hash`; use `listhtlcs`.
This one directly contains the scids of the channels involved, not
references, so can outlive the channels. As a side-effect, however,
it now never lists `payment_hash`. Having it listed (via join) is not
possible as it is a *string* in the channels table, and difficult
anyway because of channel aliases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We assume that because we've told l3 to shut down, l2 already sees it
as disconnected. But CI is ...slow... today!
```
# `l3` is disconnected and we can't send messages to it
> assert(not l2.rpc.listpeers(l3.info['id'])['peers'][0]['connected'])
E assert not True
tests/test_misc.py:2218: AssertionError
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a good sanity check that users understand that if they upgrade
to master mid-cycle they can't go back!
Suggested-by: @wtogami
Changelog-Added: Config: `--database-upgrade=true` required if a non-release version wants to (irrevocably!) upgrade the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
This happens with deprecated-apis and listconfigs, breaking some
python plugins!
Fixes: #5546Fixes: #5563
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
AFAICT we should have been doing this since we started sending and
receiving it, but didn't.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now advertize the `option_channel_type` feature (which we actually supported since v0.10.2)
As the comment in set_feerates says: "Technically, this waits until
it's called, not until it's processed.".
And the wait_for() line doesn't work, since that condition is already true.
```
@unittest.skipIf(TEST_NETWORK == 'liquid-regtest', "Fees on elements are different")
@unittest.skipIf(
not DEVELOPER or DEPRECATED_APIS, "Without DEVELOPER=1 we snap to "
"FEERATE_FLOOR on testnets, and we test the new API."
)
def test_feerates(node_factory):
l1 = node_factory.get_node(options={'log-level': 'io',
'dev-no-fake-fees': True}, start=False)
l1.daemon.rpcproxy.mock_rpc('estimatesmartfee', {
'error': {"errors": ["Insufficient data or no feerate found"], "blocks": 0}
})
l1.start()
# All estimation types
types = ["opening", "mutual_close", "unilateral_close", "delayed_to_us",
"htlc_resolution", "penalty"]
# Try parsing the feerates, won't work because can't estimate
for t in types:
with pytest.raises(RpcError, match=r'Cannot estimate fees'):
feerate = l1.rpc.parsefeerate(t)
# Query feerates (shouldn't give any!)
wait_for(lambda: len(l1.rpc.feerates('perkw')['perkw']) == 2)
feerates = l1.rpc.feerates('perkw')
assert feerates['warning_missing_feerates'] == 'Some fee estimates unavailable: bitcoind startup?'
assert 'perkb' not in feerates
assert feerates['perkw']['max_acceptable'] == 2**32 - 1
assert feerates['perkw']['min_acceptable'] == 253
for t in types:
assert t not in feerates['perkw']
wait_for(lambda: len(l1.rpc.feerates('perkb')['perkb']) == 2)
feerates = l1.rpc.feerates('perkb')
assert feerates['warning_missing_feerates'] == 'Some fee estimates unavailable: bitcoind startup?'
assert 'perkw' not in feerates
assert feerates['perkb']['max_acceptable'] == (2**32 - 1)
assert feerates['perkb']['min_acceptable'] == 253 * 4
for t in types:
assert t not in feerates['perkb']
# Now try setting them, one at a time.
# Set CONSERVATIVE/2 feerate, for max
l1.set_feerates((15000, 0, 0, 0), True)
wait_for(lambda: len(l1.rpc.feerates('perkw')['perkw']) == 2)
feerates = l1.rpc.feerates('perkw')
assert feerates['warning_missing_feerates'] == 'Some fee estimates unavailable: bitcoind startup?'
assert 'perkb' not in feerates
> assert feerates['perkw']['max_acceptable'] == 15000 * 10
E assert 4294967295 == (15000 * 10)
tests/test_misc.py:1392: AssertionError
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were waiting too long for the reconnect to happen (60s default),
which caused this test to timeout.
When testing, let's speed up the reconnect.
L2 tried to reconnect but didn't have connection information in its
gossip -- is there a way to ask/save connection data from a node you're
making a channel with that doesn't rely on their node_announcement?
Some tests need to inspect it, but most don't, and I suspect I'm missing some
error messages due to this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Returning an warning message when the pub key is not specified and there is no node in the graph.
We try to help people that use core lightning as a signer and nothings else.
Changelog-Deprecated: rpc: checkmessage return an error when the pubkey is not specified and it is unknown in the network graph.
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In various places, we assumed that when `connected` is false,
everything is finished. This is not true: we should wait for the
state we expect.
In addition, various places allows reconnections, which interfered
with the logic; suppress them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was introduced to allow creating a shared secret, but it's better to use
makesecret which creates unique secrets. getsharedsecret being a generic ECDH
function allows the caller to initiate conversations as if it was us; this
is generally OK, since we don't allow untrusted API access, but the commando
plugin had to blacklist this for read-only runes explicitly.
Since @ZmnSCPxj never ended up using this after introducing it, simply
remove it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSONRPC: `getsharedsecret` API: use `makesecret`
That's useful for "tell me everything about this node" debugging.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5348
Changelog-Added: lightningd: `log-level=debug:<partial-nodeid>` supported to get debug-level logs for everything about a peer.
Get it to log direct to stdout, so we see what's happening *as it
happens* rather than as we read it. We could restore the thread we
were using before, but that added more problems than it solved.
This means that we need the hsm password prompts in the log though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some flakes are caused by weird races in this code. Plus, if we
get things to write straight to files, we might see things in
there on post-mortem which happen after the python runner exits.
It's a bit less efficient, but much simpler. Let's see if it helps!
Some tests need a rework now, since we don't get a failure (except
eventual timeout), but they're simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use ephemeral_port_reserve to grab ports, but this can fail when we
restart a node, since the port can be reallocated at that point.
Attempt to overcome this using a global reserved list (is there a
neater way?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Over time, it has cost us more developer cycles than it has gained.
It has hidden intermittant bugs, and allowed cruft to accumulate:
when we eventually tried to figure out what was going wrong, the
actual change which caused it was now stale and forgotten.
This was a particular bane during the connectd rewrite, and I
worked through some issues which had occurred before, but were not
more likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
