Now we have defined ordering, we can add a start param.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listinvoices` has `index` and `start` parameters for listing control.
This will initially be for listinvoices, but can be expanded to other
list commands.
It's documented, but it makes promises which currently don't exist:
* listinvoice does not support `index` or `start` yet.
* It doesn't actually fire when invoices change yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `wait`: new generic command to wait for events.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
Recent cppcheck doesn't like our code; until we fix that, make it easy
to run every other source check.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We tried to fix this flake before, but now it actually happened again it shows that
b5845afd43 wasn't correct.
```
# If this happens fast enough, connect fails with "disconnected
# during connection"
try:
l1.rpc.connect(l2.info['id'], 'localhost', l2.port)
except RpcError as err:
> assert "disconnected during connection" in err.error
E assert 'disconnected during connection' in {'code': 402, 'message': 'disconnected during connection'}
E + where {'code': 402, 'message': 'disconnected during connection'} = RpcError("RPC call failed: method: connect, payload: {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'host': 'localhost', 'port': 41849}, error: {'code': 402, 'message': 'disconnected during connection'}").error
tests/test_misc.py:2728: AssertionError
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
l1 shuts down too fast, channeld doesn't get to tell gossipd about the channel,
and l2 sends (private) update_channel and we complain:
```
lightningd-2 2023-07-20T03:42:37.744Z DEBUG gossipd: received private channel announcement from channeld for 103x1x0
lightningd-2 2023-07-20T03:42:37.791Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-hsmd: Got WIRE_HSMD_CUPDATE_SIG_REQ
lightningd-2 2023-07-20T03:42:37.796Z DEBUG hsmd: Client: Received message 3 from client
lightningd-1 2023-07-20T03:42:37.857Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 103x1x0/0
lightningd-1 2023-07-20T03:42:37.864Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 103x1x0/0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Writing to the gossip_store file is not explicitly synchronized, so it
seems that connectd has not caught up with the dying flags we've set.
Simply wait for a second. Hacky, but should work.
```
def test_gossip_not_dying(node_factory, bitcoind):
l1 = node_factory.get_node()
l2, l3 = node_factory.line_graph(2, wait_for_announce=True)
l1.rpc.connect(l2.info['id'], 'localhost', l2.port)
# Wait until it sees all the updates, node announcments.
wait_for(lambda: len([n for n in l1.rpc.listnodes()['nodes'] if 'alias' in n])
+ len(l1.rpc.listchannels()['channels']) == 4)
def get_gossip(node):
out = subprocess.run(['devtools/gossipwith',
'--initial-sync',
'--timeout-after=2',
'{}@localhost:{}'.format(node.info['id'], node.port)],
check=True,
timeout=TIMEOUT, stdout=subprocess.PIPE).stdout
msgs = []
while len(out):
l, t = struct.unpack('>HH', out[0:4])
msg = out[2:2 + l]
out = out[2 + l:]
# Ignore pings, timestamp_filter
if t == 265 or t == 18:
continue
# channel_announcement node_announcement or channel_update
assert t == 256 or t == 257 or t == 258
msgs.append(msg)
return msgs
assert len(get_gossip(l1)) == 5
# Close l2->l3, mine block.
l2.rpc.close(l3.info['id'])
bitcoind.generate_block(1, wait_for_mempool=1)
l1.daemon.wait_for_log("closing soon due to the funding outpoint being spent")
# We won't gossip the dead channel any more (but we still propagate node_announcement)
> assert len(get_gossip(l1)) == 2
E assert 4 == 2
E + where 4 = len([b'\x01\x01L\xc2\xbe\x08\xbb\xa8~\x8f\x80R\x9e`J\x1cS\x18|\x12\n\xe5_6\xb0\xa6S\x9fU\xae\x19\x9c\x1fXB\xab\x81N\x13\xdc\x8e}\xb9\xb0\xb6\xe6\x14h\xd4:\x90\xce\xc3\xad\x9ezR`~\xba@\xc9\x91e\x89\xab\x00\x07\x88\xa0\x00\n\x02i\xa2d\xb8\xa9`\x02-"6 \xa3Y\xa4\x7f\xf7\xf7\xacD|\x85\xc4l\x92=\xa53\x89"\x1a\x00T\xc1\x1c\x1e<\xa3\x1dY\x02-"SILENTARTIST-27fc801-modded\x00\x00\x00\x00\x00\x00\x00', b'\x01\x01M\x00\x86\x8e4\xc8\x90p\n\x98\xf7\xce4\x1e\xd9\xd6-6\xfb(\xf0\xe4\xb7\x90\x7f\x89\xb9\xfa\x00\x82\x1b\xeb\x1fY\x93\x1e\xe0c\xb2\x0e<\xe6\x06x\xb7\xe54};\xfbd\xa0\x01S\xcf\xe8{\xf8\x8f/\xa7\xc0\xe2h\x00\x07\x88\xa0\x00\n\x02i\xa2d\xb8\xa9`\x03]+\x11\x92\xdf\xba\x13N\x10\xe5@\x87]6n\xbc\x8b\xc3S\xd5\xaavk\x80\xc0\x90\xb3\x9c:]\x88]\x03]+HOPPINGFIRE-27fc801-modded\x00\x00\x00\x00\x00\x00\x00\x00', b'\x01\x02~\xe0\x13\xb4\x84Gz\xcf(\xd4w\xa7\x9bZ\x1a\xe82\xd1\xe1\x1bLm\xc8\n\xcd\xd4\xfb\x88\xf8\xc6\xdbt\\v\x89~\xd1.e\xc8\xa8o\x9c`\xd5\xa8\x97\x11l\xf2g\xcb\xa8\xcf\r\x869\xd3\xb5\xd5\x9a\xa0my\x9f\x87\xebX\x0b\x9e_\x11\xdc!\x1e\x9f\xb6j\xbb6\x99\x99\x90D\xf8\xfe\x14h\x01\x16#\x936B\x86\xc6\x00\x00g\x00\x00\x01\x00\x00d\xb8\xa9d\x01\x02\x00\x06\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\n\x00\x00\x00\x00;\x023\x80', b"\x01\x0284\xf1a\x86z\x8e\xf2\xe5'\xf7\xfe1\x8d\x96R\x0c\xe7\x1fj#\xaf\xbd/\xba\x10e\xd1\xccQ-\xcf/>\xa5g\xc6\xd8\x9cO \xe7~\xb3\xda\xe0\\vg\xfb\x02&T\x93\xa0\xd4\x95\x8e\xd5L\x12\x9a\xf7\xe6\x9f\x87\xebX\x0b\x9e_\x11\xdc!\x1e\x9f\xb6j\xbb6\x99\x99\x90D\xf8\xfe\x14h\x01\x16#\x936B\x86\xc6\x00\x00g\x00\x00\x01\x00\x00d\xb8\xa9d\x01\x03\x00\x06\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\n\x00\x00\x00\x00;\x023\x80"])
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rune functionality moved into core from commando plugin.
Changelog-Added: JSON-RPC: `checkrune`: check rune validity for authorization; `createrune` to create/modify rune; `listrunes` to list existing runes; `blacklistrune` to revoke permission of rune
Changelog-Deprecated: JSON-RPC: `commando-rune`, `commando-listrunes` and `commando-blacklist`.
No-schema-diff-check
This extracts the core checking functionality for a rune, so they can
easily be used more widely than just commando.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We also document how the grpc test mode works, and why it currently
lacks coverage.
Changelog-Changed: pyln-testing: The grpc dependencies are now optional.
The presplitter modifier would split a payment before trying the first
attempt based on some common sizes. Its goal was to have smaller parts
in flight over different paths, in order to make it more difficult for
a forwarding node to learn payment amount. However it was causing some
issues for direct payments, and estimates on spendable amounts which
considers only the first HTLC being added, but presplitter would
always cause multiple HTLCs to be kicked off, causing the estimate to
be off.
Removing the presplitter fixes this, making draining channels easier,
and worse success rates, due to more HTLCs in flight directly
impacting the changes of getting stuck.
Changelog-Removed: pay: `pay` no longer splits based on common size, as it was causing issues in various scenarios.
These tests make assumptions about the presplitter behavior which
we'll remove in the next commit. We remove them here so we don't cause
temporary breaks in the git history.
While one side was not produced by us, we have a vested interest in propagating it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: When we send our own gossip when a peer connects, also send any incoming channel_updates.
@endothermicdev and I found this while investigating a "nobody sees my node_announcement" bug report.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #6410
Reported-by: benjaminchodroff on discord
Changelog-Fixed: Protocol: When we send our own gossip when a peer connects, send our node_announcement too (regression in v23.05)
Alex and I were reading it and I got confused: it's really a simpler loop
than it seems, with all those redundant `continue` statements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #6368
Changelog-Fixed: Protocol: we no longer gossip about recently-closed channels (Eclair gets upset with this).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't actually delete them for 12 blocks, but we can't avoid
propagating them. We don't mark node_announcements, which is a bit
weird, but avoids us tracking logic to un-dying them if a channel is
opened.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
