Fire off a snapshot of current account balances (node wallet + every
'active' channel) after we've caught up to the chain tip for the *first*
time (in other words, on start).
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
If we initialized the payment, the fees are the entire fee-chain
(final hop amount - starting hop amount)
If it's a payment we routed, the fees are the diff between the
inbound htlc and the outbound (net gain by this routing)
Added to database so data persists nicely.
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
Get rid of the 'movement_idx', since we replay events now.
Since we're removing a field from the 'coin_movement' event emission, we
bump the version type.
Changelog-Updated: `coin_movements` events have been revamped and are now on version 2.
test_onchain_dust_out restarts a node, which produces duplicate events.
this is expected, but we need to de-duplicate the events stream to get
accurate results
The old model of coin movements attempted to compute fees etc and log
amounts, not utxos. This is not as robust, as multi-party opens and dual
funded channels make it hard to account for fees etc correctly.
Instead, we move towards a 'utxo' view of the onchain events. Every
event is either the creation or 'destruction' of a utxo. For cases where
the value of the utxo is not (fully) debited/credited to our account, we
also record the output_value. E.g. channel closings spend a utxo who's
entire value we may not own.
Since we're now tracking UTXOs onchain, we can now do more complex
assertions about the onchain footprint of them. The integration tests
have been updated to now use more 'chain aware' assertions about the
ending state.
Suggested-by: Rusty Russell
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Changed: Support hsm specific error error code in lightning-cli
1. Adds the missing DNS error massages so they can be handled by
connect_control.
2. Prepends a 'All addresses failed' to code 401 message, so we
always have at least some error message to the user.
Changelog-None
The last line of the testcase was checking on the wrong node l3
instead of l1. l3 didn't had the plugins configured that would
produce the log entry we were looking for not to be present.
Changelog-None
The idea is to have different default ports for different networks.
Current default port is `9735` for everything. Let's use it for
the mainnet and reuse the difference added to the default port
from `rpc_port` values in `bitcoin/chainstate.c`.
Testnet would be `19735` (adding rpc_port - 8332 = `10000`).
Signet would be `39735` (adding rpc_port - 8332 = `30000`).
Regtest would be `19846` (adding rpc_port - 8332 = `10111`).
With Vincenzo's kind pair-programming help over tmate.
Two other commits were squashed into this one so that bisecting
never ends up in half-baked state:
1. chainparams: Fix regtest default rpc_port
bitcoind -help says this:
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 8332, testnet:
18332, signet: 38332, regtest: 18443)
2. test_gossip: Default port for regtest
hex: 2607 is now .... (could be 4d86 but Elements uses another port)
dec: 9735 is now any port (could be 19846 ^^ but now is for any port)
The lines which were binding to default port were removed as the
default port is different on each network.
NOTE: Remember not to modify gossip_store tests which loads everything raw
including the checksums.
Changelog-Changed: If the port is unspecified, the default port is chosen according to used network similarly to Bitcoin Core.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make sure the gossip msg was sent, but the other node might not
have digested it yet:
```
# Check other node can parse these
> addresses = l2.rpc.listnodes(l1.info['id'])['nodes'][0]['addresses']
E KeyError: 'addresses'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
shutdown_subdaemons frees the channel and calls destroy_close_command_on_channel_destroy, see gdb:
0 destroy_close_command_on_channel_destroy (_=0x55db6ca38e18, cc=0x55db6ca43338) at lightningd/closing_control.c:94
1 0x000055db6a8181b5 in notify (ctx=0x55db6ca38df0, type=TAL_NOTIFY_FREE, info=0x55db6ca38e18, saved_errno=0) at ccan/ccan/tal/tal.c:237
2 0x000055db6a8186bb in del_tree (t=0x55db6ca38df0, orig=0x55db6ca38e18, saved_errno=0) at ccan/ccan/tal/tal.c:402
3 0x000055db6a818a47 in tal_free (ctx=0x55db6ca38e18) at ccan/ccan/tal/tal.c:486
4 0x000055db6a73fffa in shutdown_subdaemons (ld=0x55db6c8b4ca8) at lightningd/lightningd.c:543
5 0x000055db6a741098 in main (argc=21, argv=0x7ffffa3e8048) at lightningd/lightningd.c:1192
Before this PR, there was no io_loop after shutdown_subdaemons and client side raised a
general `Connection to RPC server lost.`
Now we test the more specific `Channel forgotten before proper close.`, which is good!
BTW, this test was added recently in PR #4599.
It runs 6 nodes: under valgrind this ends up consuming 5.3 GB RSS. By
stopping nodes between, we peak about 1G RSS.
Measured using:
(while true; do echo $(for i in 4 5 6; do ps uh | tr -s ' ' | cut -d\ -f$i | tally; done); sleep 5; done)&
(Which measures my other processes as well, but that's only about 100M).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ChangeLog-Added: With the `sqlite3://` scheme for `--wallet` option, you can now specify a second file path for real-time database backup by separating it from the main file path with a `:` character.
valgrind locally complains about the allocations in autodata leaking:
```
==138200== 16 bytes in 1 blocks are still reachable in loss record 1 of 2
==138200== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==138200== by 0x10D41A: autodata_register_ (autodata.c:20)
==138200== by 0x10E7B8: register_autotype_type_to_string (type_to_string.h:79)
==138200== by 0x10F5CA: register_one_type_to_string0 (block.c:259)
==138200== by 0x19734C: __libc_csu_init (in /home/rusty/devel/cvs/lightning/common/test/run-route-specific)
==138200== by 0x4A3D03F: (below main) (libc-start.c:264)
==138200==
==138200== 176 bytes in 1 blocks are still reachable in loss record 2 of 2
==138200== at 0x483DFAF: realloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==138200== by 0x10D472: autodata_register_ (autodata.c:26)
==138200== by 0x122D37: register_autotype_type_to_string (type_to_string.h:79)
==138200== by 0x122F1F: register_one_type_to_string0 (node_id.c:50)
==138200== by 0x19734C: __libc_csu_init (in /home/rusty/devel/cvs/lightning/common/test/run-route-specific)
==138200== by 0x4A3D03F: (below main) (libc-start.c:264)
==138200==
make: *** [Makefile:638: unittest/common/test/run-route-specific] Error 7
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we forget a channel, we can get upset when we get an update about it:
```
2021-11-04T00:35:43.8242370Z lightningd-3: 2021-11-04T00:29:22.073Z DEBUG gossipd: Pruning channel 103x1x1 from network view (ages 61 and 22s)
...
2021-11-04T00:35:43.8263502Z lightningd-3: 2021-11-04T00:29:22.509Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 103x1x1/0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This loads up 20MB of plugins temporarily; we seem to be getting OOM
killed under CI and I wonder if this is contributing.
Doesn't significantly reduce runtime here, but I have lots of memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CI seems to be OOM killing us; 5 may be too many under valgrind.
VALGRIND=1 pytest tests/test_pay.py::test_fetchinvoice
Before:
1 passed in 199.33s (0:03:19)
After:
1 passed in 177.91s (0:02:57)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This surprised me, since the CHANGELOG for [0.8.2] said:
We now announce multiple addresses of the same type, if given. ([3609](https://github.com/ElementsProject/lightning/pull/3609))
But it lied!
Changelog-Fixed: We really do allow providing multiple addresses of the same type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
October was the date Torv2 is no longer supported by the Tor Project;
it will probably not work at all by next release, so we should remove
it now even though it's not quite the 6 months we prefer for
deprecation cycles.
I still see 110 nodes advertizing Torv2 (vs 10,292 Torv3); we still
parse and display it, we just don't advertize or connect to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to require that fundchannel_complete() take a PSBT, where it
does sanity checks to avoid this error, making this a difficult mistake
to make.
Is it time to remove this functionality anyway? @cdecker?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fails liquid-regtest otherwise; liquid tends to hit the dust limit
earlier than non-liquid tx, and MPP exacerbates this by divvying up
payments into dusty bits then attempting to shove them through the same
channel, hitting the dust max. The MPP then fails as not all the parts
were able to arrive at their destination.
Let's make this a softer launch by just warning on the channel til the
feerates go back down.
You can also 'fix' this by upping your dust limit with
the `max-dust-htlc-exposure-msat` config.
Fixes#4482Fixes#4481
Changelog-Added: pay: Payment attempts are now grouped by the pay command that initiated them
Changelog-Fixed: pay: `listpays` returns payments orderd by their creation date
Changelog-Fixed: pay: `listpays` no longer groups attempts from multiple attempts to pay an invoice
If it reconnects by itself, it will get a warning message:
```
lightningd-2: 2021-10-08T01:40:42.446Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#3: billboard: Sent reestablish, waiting for theirs
lightningd-2: 2021-10-08T01:40:42.446Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#3: peer_in WIRE_ERROR
lightningd-2: 2021-10-08T01:40:42.447Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#3: billboard perm: Received error channel 0a6220a3e904d17e72b5c3499928dc8a65720063c6395c999a129a0ff0b06afb: Forcibly closed by `close` command timeout
lightningd-2: 2021-10-08T01:40:42.448Z INFO 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#3: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: error channel 0a6220a3e904d17e72b5c3499928dc8a65720063c6395c999a129a0ff0b06afb: Forcibly closed by `close` command timeout
```
And this will make CI complain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's probably not worth fixing for the other daemons.
Changelog-Changed: JSON-RPC: `ping` now only works if we have a channel with the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Send a ping every 15-45 seconds. If we try to send another one and we
haven't got a reply, hang up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: Send regular pings to detect dead connections (particularly for Tor).
To minimize the diffs, we #if 0 the code. We'll reenable it once
channeld is ready.
We also temporarily disable the ping tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
We always allocate a new `struct command` when we get a full JSON
object from stdin:
b2df01dc73/plugins/libplugin.c (L1229-L1233)
If it happens to be a notification, we pass the `struct command` to
the handler, and not free it ourselves:
b2df01dc73/plugins/libplugin.c (L1270-L1275)
There are only nine points in `plugins/libplugin.c` where we `tal_free`
anything, and only one of them frees a `struct command`:
b2df01dc73/plugins/libplugin.c (L224-L234)
The above function `command_complete` is not appropriate for
notification handlers; the above function sends out a response
to our stdout, which a notification handler should not do.
However, as-is, it does mean that notification handling leaks
`struct command` objects, which can be problematic if we ever
have future built-in plugins which are significantly more
dependent on notifications.
This commit changes notification handlers to return
`struct command_result *`, because possibly in the future
notification handlers may want to perform `send_outreq`, so we
might as well use our standard convention for callbacks, and
to encourage future developers to check how to properly
terminate notification handlers (and free up the
`struct command`).
We also now provide a `notification_handled` function which a
notification handler must eventually call, as well as a
`notification_handler_pending` which is just a snowclone of
`command_still_pending`.
It was incredibly flaky due to the potential for l2 announcing the
channel before l1 could get to it, thus suppressing the outgoing
announcement which we were looking for. This now checks either
direction.
Before this fix the failure rate was 24% (out of 100 runs), afterwards
it's 0%.
Changelog-None
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
We can miss it in both logs, so wait for it instead:
```
2021-09-22T07:25:59.1582950Z > l3.rpc.addgossip(ann.split()[3])
2021-09-22T07:25:59.1583911Z E AttributeError: 'NoneType' object has no attribute 'split'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Support to listpays the status parameter to filter the payments by status.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
sendonionmessage is going to be the new one, and do much *less*.
As this is an internal experimental-only API, no deprecation cycle
required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We never tested that we can correctly unwrap on the next step after
unblinding: it failed because we mangled the onion in place! Fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows cmdline users to have more idea what's going on.
Inspired-by: https://github.com/ElementsProject/lightning/issues/4777
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `close` now notifies about the feeranges each side uses.
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
This is now allowed for anchors (as per https://github.com/lightningnetwork/lightning-rfc/pull/847).
We need to play with feerates, since we don't put a discount on anchor
commitments yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes the new bolt11 test vectors, and also removes the
requirement that HTLCs be less than 2^32 msat. We keep that for now
because Electrum enforced it on receive: in two releases we will stop
that too.
So no longer warn about needing mpp in that case either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Protocol: No longer restrict HTLCs to
We weren't actually getting the last log out; this does that.
We have to fix test_bitcoin_failure which now notices the BROKEN
log message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: libplugin: Fatal error messages from plugin_exit() now logged in lightningd.
Changelog-Changed: Change order parameters in the listforwards command
Changelog-Deprecated: Change order of the status parameter in the listforwards rpc command.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
After some discussion with @shesek, and my own usage, we agreed that
a more comprehensive interface, which explicitly supports grouping,
is desirable.
Thus keys are now arrays, with the semantic that a key is either a
parent or has a value, never both.
For convenience in the JSON schema, we always return them as arrays,
though we accept simple strings as arguments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We add a generation counter, and allow update or del conditional
on a given generation.
Formalizes error codes, too, since we have more now.
Suggested-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The function is already provided in
contrib/pyln-testing/pyln/testing/utils.py (which is also
imported in this module), so there is no need to define it
a second time.
We actually were waiting for l3 to disconnect, not l2.
But in general we should be looking for status rather than grovelling
in the logs where possible, so I changed all those.
```
2021-08-17T04:40:34.9015538Z # l2 leases a channel from l3
2021-08-17T04:40:34.9016520Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9017570Z rates = l2.rpc.dev_queryrates(l3.info['id'], amount, amount)
2021-08-17T04:40:34.9018724Z l3.daemon.wait_for_log('disconnect')
2021-08-17T04:40:34.9019851Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9021467Z l2.rpc.fundchannel(l3.info['id'], amount, request_amt=amount,
2021-08-17T04:40:34.9022865Z feerate='{}perkw'.format(feerate), minconf=0,
2021-08-17T04:40:34.9024000Z > compact_lease=rates['compact_lease'])
...
2021-08-17T04:40:34.9103422Z > raise RpcError(method, payload, resp['error'])
2021-08-17T04:40:34.9106829Z E pyln.client.lightning.RpcError: RPC call failed: method: fundchannel, payload: {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'amount': 500000, 'feerate': '2000perkw', 'announce': True, 'minconf': 0, 'request_amt': 500000, 'compact_lease': '029a00640064000000644c4b40'}, error: {'code': 400, 'message': 'Unable to connect, no address known for peer', 'data': {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'method': 'connect'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fail waiting for 'Resolved OUR_UNILATERAL/DELAYED_OUTPUT_TO_US by our proposal OUR_DELAYED_RETURN_TO_WALLET'
because we close *two* channels, but only wait for one transaction before mining a block.
This means we might only have one, and we immediately mine the next wait_for_mempool=1,
so the OUR_DELAYED_RETURN_TO_WALLET isn't mined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If l3 is too slow, it can get channel_announcement after channel
is closed, so it gets upset at the node_announcement which follows:
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Updated pending announce with update 103x1x1/1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: channel_announcement: no unspent txout 103x1x1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_NODE_ANNOUNCEMENT before announcement 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This actually caused the flake in test_funding_reorg_private, where
l1 and l2 might not mark the original channel disabled. In fact, they
should *remove* it as it gets reorged out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It subsumes `decodepay`, and it's nicer if people can just assume it's
available at all times.
Changelog-Added: JSON-RPC: `decode` now available without `experimental-offers`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pointed out by @fiatjaf, and indeed it happened to me as well; a peer with
a high feerate reconnects and sends a similar (but now ludicrous) feerate,
and we get upset:
```
$ lightning-cli listpeers 039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36
{
"peers": [
{
"id": "039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36",
"connected": false,
"channels": [
{
"state": "CHANNELD_NORMAL",
"scratch_txid": "d796aa9c44920cc7169cdb61e36437bf180cedaec44103a69591ce2baac9b1d9",
"last_tx_fee": "14329000msat",
"last_tx_fee_msat": "14329000msat",
"feerate": {
"perkw": 19791,
"perkb": 79164
},
```
Then in the logs:
```
2021-07-23T19:34:56.227Z DEBUG 039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36-channeld-chan#39381: billboard perm: update_fee 17055 outside range 253-7210
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, Shesek tried an empty offer description, and the
resulting signature didn't match since it was omitted entirely from
the bolt12 string!
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't automatically *reject* an invoice which asks for a different
msat than we specified (caller may!), but we don't bother noting it
unless it is different.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You could have quantity_min of 0, which makes no sense; spec has been
updated, so quote and enforce that.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Documentation for the funderupdate command on the funder plugin.
Realized we were missing the "leases_only" in the output; also adds
'_msat' to msat denominated outputs so they're parsed correctly by our
python bindings (also matches our naming conventions)
Changelog-EXPERIMENTAL: funder: `funderupdate` command to view and update params for contributing our wallet funds to v2 channel openings. Provides params for enabling `option_will_fund`.
Since we now use 'compact_lease' to gate an open (if the rates have
changed, we fail), we no longer need to rely on query rates for figuring
things out, so we make it dev-only.
Changelog-Changed: JSON-API: queryrates is now developer only
If there's no plugin currently in place, we simply won't return any
funding at all, in which case we'd expect them to handle however
they want. (our implementation would fail the open, as we only accept
opens that have at least as much as we've requested provided)
Useful for parsing a passed in feerate before calling lightningd with
it, e.g. when you need to know what the feerate is for a fundpsbt before
calling fundpsbt
Changelog-Added: JSON-RPC: new command `parsefeerate` which takes a feerate string and returns the calculated perkw/perkb
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This is in preparation for removing support (next release?).
Changelog-Changed: Protocol: We now assume nodes support TLV onions (non-legacy) unless we have a node_announcement which says they don't.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In fact, we make it compulsory, which means if you don't understand it
you'll hang up on us!
Add some logging for that in future.
Changelog-Changed: Protocol: All new invoices require a payment_secret (i.e. modern TLV format onion)
Changelog-Changed: Protocol: We can no longer connect to peers which don't support `payment_secret`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for regtest and testnet. Sure, you shouldn't use this on mainnet,
but I haven't restricted it because our users are usually pretty clever.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #1806
Changelog-Added: config: `force_feerates` option to allow overriding feerate estimates (mainly for regtest).
We don't do it for sendinvoice (yet?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` can take a payer note, and `listinvoice` will show the payer_notes received.
As per latest spec revision.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: BOLT12 offers can now be unsigned, for really short QR codes.
100+ is for experimentation, modern spec practice is to assign feature bits
sequentially as PRs get added, to avoid later renumbering.
Still respect the old bit for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And even if we can't find *ourselves* because we have no channels
(we won't be able to pay, sure, but we can request an invoice!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And add the local_offer_id to the schemas too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSONRPC: `listoffers` now shows `local_offer_id` when listing all offers.
We were actually using the last commit tx's size, since we were
setting it in lightningd. Instead, hand the min and desired feerates
to closingd, and (as it knows the weight of the closing tx), and have
it start negotiation from there.
This can be significantly less when anchor outputs are enabled: for
example in test_closing.py, the commit tx weight is 1124 Sipa, the
close is 672 Sipa!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: Use a more accurate fee for mutual close negotiation.
We set amounts to a list, but then don't use the values except
as a boolean.
Make it a boolean, which should also speed the test up!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us transition (with a few supporting changes) to closingd,
which will happily let them mutual close with us.
We already handle the case where this mutual close is redundant (for
packet loss), so this is easy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We will now reestablish and negotiate mutual close on channels we've already closed (great if peer has lost their database).
Let the callers do that (only channeld needs to do this).
We temporarily send an error on unknown reestablish in openingd, as
this mimic previous behavior and avoids breaking tests (it does leave
a BROKEN message in the logs though, so
test_funding_external_wallet_corners needs to ignore that for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, if one side sees the final CLOSING_SIGNED and the other
doesn't, we won't talk when it reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
This was turned by at random by CI:
1. Alice has sent shutdown, but it still waiting for revoke_and_ack.
2. Bob has sent and received shutdown, and sent revoke_and_ack,
so it considers it time for signature exchange.
3. Disconnect before Alice received revoke_and_ack.
4. Reconnect, Bob is in closingd, which doesn't rexmit revoke_and_ack.
5. Timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That's a terrible, terrible idea. (Documentation comes in later patch
which has the schema).
Also, blockheight is a u32, so simplify.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listtransactions` `outputs` `satoshis` field (use `msat` instead).
In general, it's better to omit a field than put in a 'null', and
putting variable-named fields in an object is also a bad idea.
This is reflected in how hard this is to express in JSON schema, too.
Others:
1. Remove the obsolete "funding": "LOCAL" from unopened channels, but add
"opener": "local" as used in normal channels.
2. htlc cltv_expiry is a u16.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listfunds` `channels` `funding_allocation_msat` and `funding_msat`: use `funding`.
Changelog-Deprecated: JSON-RPC: `listfunds` `channels` `last_tx_fee`: use `last_tx_fee_msat`.
Changelog-Deprecated: JSON-RPC: `listfunds` `channels` `closer` is now omitted if it does not apply, not JSON `null`.
https://github.com/lightningnetwork/lightning-rfc/pull/877 talks about
removing this restriction (only Electrum actually enforced it on
receive), so start by allowing creation of giant invoices, though
we mark them as requiring mpp.
Changelog-Changed: JSON-RPC: `invoice` now allows creation of giant invoices (>= 2^32 msat)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Test that it roundtrips with the non-stdin way, in order to make sure we
don't introduce a discrepancy between the two.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This turned into a more extensive cleanup than intended. The previous
warnings were overlapping and confusing, especially now MPP is the norm.
*warning_capacity* is now the "even under best circumstances, we don't
have enough incoming capacity", which is really what
warning_mpp_capacity was trying to say (no longer printed).
*warning_offline* and *warning_deadends* are only given if adding such
peers would have helped give capacity (i.e. not if *warning_capacity*
is set). The new *warning_private_unused* tells you that we would
have sufficient capacity, but we refused to expose private channels.
The test cases have been enhanced to cover the new warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now gives `warning_private_unused` if unused unannounced channels could have provided sufficient capacity.
Changelog-Changed: JSON-RPC: `invoice` warnings are now better defined, and `warning_mpp_capacity` is no longer included (since `warning_capacity` covers that).
Temporarily rename old getroute to getrouteold (we will remove this).
Changelog-Changed: JSON-RPC: `getroute` is now implemented in a plugin.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If l2 doesn't have the funding locked in, the rest of the test fails
(we got a timeout on `wait_for(lambda: [c['active'] for c in l2.rpc.listchannels('103x1x0')['channels']] == [False, False])`)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, sending a v1 address (or, in fact, any random crap!)
would cause the unsupporting node to unilaterally close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I did this by copying the updated bech32 code, and then re-patching in
our minor changes:
1. Headers modded (we need size_t)
2. Explicit length for bech32_encode/decode (not 90).
3. Exposing and bech32_ prefix for convert_bits, charset, charset_rev.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Annotating the htlc in `listpeers` with their current status, and
which plugin is currently holding on to them with their
`htlc_accepted` hook can help us debug where plugins may go wrong.
Changelog-Added: jsonrpc: HTLCs in `listpeers` are now annotated with a status if they are waiting on an `htlc_accepted` hook of a plugin.
This test takes 695 seconds, because fundwallet waits for the wallet to
notice the tx, which takes 60 seconds if not DEVELOPER. Do all the waiting
at once, and this speeds the test up to 153 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As you can see, I did a lot of debugging before realizing that the
actual problem is in the pay plugin :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This reverts commit 2b12cac31e. There is
no need to skip the test in this case, and it seems to simply be an artifact
of CI-debugging hell :)
Changelog-None
This adds our first (basic) schema, and sews support into pyln-testing
so it will load schemas for any method for doc/schemas/{method}.schema.json.
All JSON responses in a test run are checked against the schema (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
result should *always* be an object. This allows it to add fields
without breaking the API. A command which returns "result" as a
string is living in sin.
This changes one of the two callers of "command_success_str".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes anysegwit and the updated HTLC tiebreak test vector. It
also adds explicit wording for invalid per_commitment_secret (which
nicely matches our code already!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `fundchannel` and `multifundchannel` will now reserve funding they use for 2 weeks instead of 12 hours.
We already have this field in reserveinputs and unreserveinputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listfunds` has a new `reserved_to_block` field.
Tor v2 hidden services have been deprecated for a while:
https://blog.torproject.org/v2-deprecation-timeline .
This prevents user from being able to set them in the configuration
and to connect to them while still letting us be able to parse them
for gossip.
Changelog-Deprecated: lightningd: v2 Tor addresses. Use v3. See https://blog.torproject.org/v2-deprecation-timeline.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
test_funding_cancel_race uses fundchannel_open etc; this new test does a
similar (but not exact thing, as 'aborts' dont work after an update
is confirmed) thing, using openchannel_update and openchannel_abort.
We set the timeout on first HTLC, but didn't clear it if that HTLC failed.
It's saner to have a per-HTLC timeout (since that's what it is!) and
also our timer infra is specially coded to scale approximately infinitely so
trying to optimize this is vastly premature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We would sometimes gratuitously disconnect 30 seconds after an HTLC failed.
If l2 didn't get FUNDING_LOCKED from l1 before it disconnected, it
won't be in state CHANNELD_NORMAL: it will be in DUALOPEND_AWAITING_LOCKIN.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This would flake fairly regularly, what we really care about is
asserting that the l2 node is in CHANNELD_NORMAL state, while the l1
node hasn't progressed that far yet.
Trying to put all the disconnect logic into the same path was a dumb
idea. If you asked to reconnect but passed in an 'unsaved' channel, we
would not call the 'reconnect' code.
Instead, we make a differentiation between "unsaved" channels
(ones that we haven't received commitment tx for) and handle the
disconnect for these separate from where we want to do a reconnect.
Tests that will only run when !EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v1')
def test_...()
Tests that will only run when EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v2')
def test_...()
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4494
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: config: New option `log-timestamps` allow disabling of timestamp prefix in logs.
Since plugins will start sending them soon, and they are likely to get
it wrong sometimes, be a bit more lenient, warn them in the logs
instead and then make sure it doesn't accidentally work anyway.
We will eventually start emitting and dispatching custom notifications
from plugins just like we dispatch internal notifications. In order to
get reasonable error messages we need to make sure that the topics
plugins are asking for were correctly registered. When doing this we
don't really care about whether the plugin that registered the
notification is still alive or not (it might have died, but
subscribers should stay up and running), so we keep a list of all
topics attached to the `struct plugins` which gathers global plugin
information.
Behold! An immaculately concepted plugin for configuring your node to do
amazing things*
*fund channel open requests
Changelog-Added: Plugins: Add `funder` plugin, which allows you to setup a policy for funding v2 channel open requests. Requres --experimental-dual-fund option
We don't always get two transactions on line 1019; the comment is
confused (only one penalty tx successfully comes out of l3). So make
sure we get the other transactions when we expect them, and then
make this test more specific.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
We didn't wait for the sendtx to complete before shutting down,
and hence timed out:
```
l2.daemon.wait_for_log('Broadcasting funding tx')
l1.stop()
l2.stop()
bitcoind.generate_block(6)
l1.restart()
l2.restart()
# Make sure we're ok.
> l2.daemon.wait_for_log(r'to CHANNELD_NORMAL')
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Channel can be inactive before it disconnects, apparently. Check
explicitly for the disconnected state so we get the expected error.
Here's what happened:
```
# Can't pay while its offline.
with pytest.raises(RpcError, match=r'failed: WIRE_TEMPORARY_CHANNEL_FAILURE \(First peer not ready\)'):
> l1.rpc.sendpay(route, rhash)
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
```
And the logs show that the outgoing HTLC was sent to channeld before it
realized the connection was closed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Change the address in the canned db: it seems we won the lottery and
l1 connected, and got an error!
```
E ValueError:
E Node errors:
E - lightningd-1: had warning messages
E Global errors:
...
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_CHANNEL_REESTABLISH
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_GOSSIP_TIMESTAMP_FILTER
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_ERROR
lightningd-1: 2021-04-07T02:44:53.580Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: error channel fdeb1ea12e02aa043f66ba581e969a1882d21142b19429995c6733bb71070bb6: Multiple channels unsupported
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Will try reconnect in 60 seconds
```
So I changed the port in the db to "1" which will never succeed:
```
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:38723');
COMMIT;
sqlite> UPDATE peers SET address="127.0.0.1:1"
...> ;
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:1');
COMMIT;
sqlite>
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
This was flaky because sometimes we'd generate blocks before the funding
transaction reached the mempool.
If we wait until it's in, it works as expected.
[ Neatened to use wait_for_mempool arg --RR ]
We updated the "UNKNOWN TYPE channel_id" -> the actual channel id;
the reason for why the error fails shouldn't be restrictive (we just
know that it fails)
There is little point in faking a self-payment, but we should also not
crash :-)
Fixes#4438
Changelog-Fixed: keysend: Keysend returns an error when a self-payment is requested
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
And update all the in-tree callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `fundchannel_complete` `txid` and `txout` parameters (use `psbt`)
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a version of this that keeps the PSBT in memory and does some
fancy addition/subtraction of unuseable parts for the v2's, however
it's much easier and simpler to simply error on the peer and re-start
from the very beginning.
This only works if we haven't gotten commitments from the peer yet (in
fact either method would only work if we haven't got commitments from
the peer yet), so if we've got commitments from them we simply mark them
as failed an go again.
In a perfect world, we'd remember what inputs we used last time, and
reuse those again on the re-attempt, which would pefectly guarantee both
that the failed opens (ones w/ commitments exchanged) would be canceled
after this completes (and we could re-try the failed again).
As it is, this is not perfect. It is, however, servicable.
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
We were not aborting if we had routehints, even though all routehints
may have been filtered out.
Changelog-Fixed: pay: `pay` will now abort early if the destination is not reachable directly nor via routehints.
We would happily spin on attempts that are doomed to fail because we
don't know the entrypoint. Next up: remove routehints whose
entrypoints are known but unreachable.
We consolidate to the latest/singular RFC patch for dual-funding, so
there's just a single patchfile for the change. Plus we move back to the
opener setting the desired feerate, the accepter merely declines to
participate if they disagree with the set rate.
Looks like #4394 treated a symptom but not the root cause. We were
actually sending the message framed with the WIRE_CUSTOMMSG_OUT and
the length prefix over the encrypted connection to the peer. It just
happened to be a valid custommsg...
This fixes the issue, and this time I made sure we actually send the
raw message over the wire. However for backward compatibility we
needed to imitate the faulty behavior which is 90% of this patch :-)
Changelog-Fixed: plugin: `dev-sendcustommsg` included the type and length prefix when sending a message.
Users have no idea what they would pay for unilateral closes.
At least this gives them a clue!
Reported-by: @az0re on IRC.
Changelog-Added: JSON-RPC: `listpeers` now shows latest feerate and unilaral close fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec doesn't say to do this, but it makes sense, otherwise
they'll never be able to mutually close the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were always prefixing the `message` field with the internal type
prefix 0x0407, followed by the length prefix. Neither is needed since
the type being constant is of no interest to the plugin and the length
being implicit due to the JSON-encoding.
Reported-by: Ilya Evdokimov
Changelog-Fixed: plugin: The `custommsg` hook no longer includes the internal type prefix and length prefix in its `payload`
Changelog-Deprecated: plugin: The `message` field on the `custommsg` hook is deprecated in favor of the `payload` field, which skips the internal prefix.
They need to specify fees to get a channel before this, but it's possible.
The test revealed no surprises (other than the last change).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Saves a great deal of confusion for regtest users.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: If bitcoind won't give a fee estimate in regtest, use minimum.
This avoids spamming the logs. We also remove the duplicate debug
logs on self-disable (plugin_kill logs it for us).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a plugin died due to connection close, we'd always say
"Plugin exited before completing handshake.", which was often
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If not all nodes are up-to-date with the new blocks, they can reject
announcements:
```
lightningd-4: 2021-02-23T02:02:47.832Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Ignoring future channel_announcment for 124x1x0 (current block 123)
lightningd-4: 2021-02-23T02:02:47.848Z DEBUG lightningd: Adding block 133: 2d950451211398de9c10bf9df7eb53b385390eca31e306bc8fc1387b53d9f9a2
lightningd-4: 2021-02-23T02:02:47.865Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/0
lightningd-4: 2021-02-23T02:02:47.866Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/1
```
Technically, this change is not sufficient either, since *gossipd* might
not know about new block yet. But it makes this case less likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get a label clash: easy, just re-serve:
```
2021-02-18T04:29:37.474Z **BROKEN** plugin-offers: Failed invoice_request lnr1qgsqvgnwgcg35z6ee2h3yczraddm72xrfua9uve2rlrm9deu7xyfzrcyyqwtp0rmsgquvuacqcl5cdfzwzmu3v8tqgvpqs8e80dlmxm7ey4xwrqdsqqqqqqqqqqqqqqqq2pqqfqpqynzqzx9rylzy40ernj4jzc3p2dwy3n8x6lqeaywwk725ghx4kx63pcfxgg2z3nsn80jzge06nt3ks8pr6rvnujq48376lpmrr3cq04nurpy783eyr0awh5773lrlmjek07rjf0nx4g9235ulkcs7jp2h5gumjyquhadh846da3jptxm9g0qz5lne4hjhag for offer 1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67: Got JSON error: {\"code\":900,\"message\":\"Duplicate label\",\"data\":{\"label\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67-08c5193e2255f91ce5590b110a9ae2466736be0cf48e75bcaa22e6ad8da88709-1\",\"bolt12\":\"lni1qgsqvgnwgcg35z6ee2h3yczraddm72xrfua9uve2rlrm9deu7xyfzrcyyqwtp0rmsgquvuacqcl5cdfzwzmu3v8tqgvpqs8e80dlmxm7ey4xwzqrw4lauzsc2ajk26mv0ysxxmmxvejk2grxdaezqun4wd68jggvpkqqqqqqqqqqqqqqqqpgyqq7ypymf9efe2jj5r2mzunlqz67d75ht3ukxk0x9ftkcuknrgepsgupwfqpqynzqzx9rylzy40ernj4jzc3p2dwy3n8x6lqeaywwk725ghx4kx63pcf9qzxqt0dxq4zqwtz2qu44gzx7nzczc494cce2tgph5xgu5sn7vh8frky9z5n08xj9sp3yaxe9cqs5vss59r8pxwlyy3jl4xhrdqwz85xe9qqgcpda590qs9khxdx5qpetlx0j6ap0wsxagssmy2qjvhjp2kc3na54pht3pp76c405upne360lh8rzye32xxq6l0phpkk9pu9lwxnqkxuwt2nqqr9u\",\"payment_hash\":\"396250395aa046f4c58162a5ae31952d01bd0c8e5213f32e748ec428a9379cd2\",\"msatoshi\":7700446,\"amount_msat\":\"7700446msat\",\"status\":\"unpaid\",\"description\":\"Weekly coffee for rusty!\",\"expires_at\":1614832137,\"local_offer_id\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67\"}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to only set it for single-use offers (where it's required),
but it's still interesting for multi-use offers, so let's keep it
there.
We also put this field in the documentation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
