@thestick613 noticed that since tor version below 0.3.2.2-alpha
will not support V3 ed25519 address formats, the error handling
is not that helpful in the error message from cli.
So now we add an hint.
Changelog-None:
Signed-off-by: Saibato <saibato.naga@pm.me>
connectd/connectd.h; Add helper function to update conn error list
Signed-off-by: Saibato <saibato.naga@pm.me>
Our existing coin_moves tracking logic assumed that any tx we had an
input in belonged to *all* of our wallet (not a bad assumption as long
as there was no way to update a tx that spends our wallets)
Now that we've got `signpsbt` implemented, however, we need to be
careful about how we account for withdrawals. For now we do a best guess
at what the feerate is, and lump all of our spent outputs as a
'withdrawal' when it's impossible to disambiguate
It returns NULL, so you can simply `return fromwire_fail(...)`
if you want to return NULL in this case. Use that more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
We did this originally because these types are referred to in the bolts, and we
had no way of injecting the correct include lines into those. Now we do, so
there's less excuse for this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we have only a single member in a TLV (e.g. an optional u64),
wrapping it in a struct is awkward. This changes it to directly
access those fields.
This is not only more elegant (60 fewer lines), it would also be
more cache friendly. That's right: cache hot singles!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will help with the next patch, where we wean off using a global
for features: connectd.c has access to the feature bits.
Since connectd might now want to send a message, it needs the crypto_state
non-const, which makes this less trivial than it would otherwise be.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is to prepare for dynamic features, including making plugins first
class citizens at setting them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This restriction was removed from the spec as of
86c2ebcc5973a4133d3ce4d80ae1c203061a1646.
We also fix up some strange formatting in that part of the documentation.
Changelog-changed: We now announce multiple addresses of the same type, if given.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a common thing to do, so create a macro.
Unfortunately, it still needs the type arg, because the paramter may
be const, and the return cannot be, and C doesn't have a general
"(-const)" cast.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The `init_featurebits` are computed at startup, and then cached
indefinitely. They are then used whenever a new `init` handshake is performed.
We could add a new message to push updates to `connectd` whenever a plugin is
added or removed, but that's up for discussion.
GCC 10 defaults to `-fno-common`. no longer automatically sharing
global variable definitions, which makes it important to define
them in only one place (otherwise there will be duplicate definition
errors). Add `extern` qualifiers where (I think) is the best place for
them.
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add towire_int() and fromwire_int() functions to "(de)serialize"
"int". This will only work as long as both the caller of towire_int()
and the caller of fromwire_int() use the same in-memory representation
of signed integers and have the same sizeof(int).
Changelog-None
The tor proxy might want auth 0x2 or answer what ever not defined
in https://tools.ietf.org/html/rfc1928.
Changelog-Fixed: TOR: We don't send any further request if the return code of connect is not zero or error.
Signed-off-by: Saibato <saibato.naga@pm.me>
For example:
"Tor connect out for host example.com error: 4 "
becomes:
"Error connecting to example.com: Tor server reply: host unreachable"
Also clarify the error:
"Connected out for example.com error"
to:
"Connected out for example.com error: authentication required"
because the only reason it could have failed is that the Tor socks5
server did not like any of our proposed auth methods and we only
proposed "no auth".
Changelog-None
We want to have a static Tor service created from a blob bound to
our node on cmdline
Changelog-added: persistent Tor address support
Changelog-added: allow the Tor inbound service port differ from 9735
Signed-off-by: Saibato <saibato.naga@pm.me>
Add base64 encode/decode to common
We need this to encode the blob for the tor service
Signed-off-by: Saibato <saibato.naga@pm.me>
The spec is (RSN!) going to explicitly denote where each feature should
be presented, so create that infrastructure.
Incorporate the new proposed bolt11 features, which need this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was decided at a recent spec meeting: in particular, mpp and
var_onion_optin options will be used here.
We enhanced "features_supported" into "features_unsupported" so it
can return the first un-handlable bit number.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is ignored in subdaemons which are per-peer, but very useful for
multi-peer daemons like connectd and gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even if it is on startup only once ...
Like @bitcoin-software indicated the expected UX should be in
line with what a user expects the software will do
so we should not dns if we say so with a flag that suggest that.
Changelog-Fixed: We disable all dns even on startup the scan for bogus dns servers, if --always-use-proxy is set true
Signed-off-by: Saibato <saibato.naga@pm.me>
I was wondering why TAGS was missing some functions, and finally
tracked it down: PRINTF_FMT() confuses etags if it's at the start
of a function, and it ignores the rest of the file.
So we put PRINTF_FMT at the end, but that doesn't work for
*definitions*, only *declarations*. So we remove it from definitions
and add gratuitous declarations in the few static places.1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were using `i` as index variable in two nested loops. This works as long as
the DNS seed resolves to a single address, but will crash if the node has both
an A as well as an AAAA entry, at which point we'll try to index the hostname
without a matching entry.
Signed-off-by: Christian Decker <@cdecker>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
With enable-autotor-v2 defined in cmdline the default behavior to create
v3 onions with the tor service call, is set to v2 onions.
Signed-off-by: Saibato <saibato.naga@pm.me>
This encoding scheme is no longer just used for short_channel_ids, so make
the names more generic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than reaching into data structures, let them register their own
callbacks. This avoids us having to expose "memleak_remove_xxx"
functions, and call them manually.
Under the hood, this is done by having a specially-named tal child of
the thing we want to assist, containing the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Keeping the uintmap ordering all the broadcastable messages is expensive:
130MB for the million-channels project. But now we delete obsolete entries
from the store, we can have the per-peer daemons simply read that sequentially
and stream the gossip itself.
This is the most primitive version, where all gossip is streamed;
successive patches will bring back proper handling of timestamp filtering
and initial_routing_sync.
We add a gossip_state field to track what's happening with our gossip
streaming: it's initialized in gossipd, and currently always set, but
once we handle timestamps the per-peer daemon may do it when the first
filter is sent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to generate this in the caller, then save it in case we needed
to retry. We're about to change the message we send to lightningd, so
we'll need to regenerate it every time; just hand all the extra args
into peer_connected() and we can generate the `connect_peer_connected`
msg there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1diff --git a/connectd/connectd.c b/connectd/connectd.c
index 94fe50b56..459c9ac63 100644
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fixes block parsing on testnet; specifically, non-standard tx versions.
We hit a type bug in libwally (wallt_get_secp_context()) which I had to
work around for the moment, and the updated libsecp adds an optional hash
function arg to the ECDH function.
Fixes: #2563
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They don't clean up after themselves, so best we do it here (by this
point we've already done the pid check to make sure we're the only
lightningd here anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's supposed to be `--bind-addr=/socket` since you can't advertize a
local address, but the parser accepts `--addr=` too, and the intent is
clear.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
lightning_connectd(19780): STATUS_FAIL_INTERNAL_ERROR: Failed to bind on 2 socket: Address family not supported by protocol
"Untested code is buggy code"
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly just copying over the copy-editing from the
lightning-rfc repository.
[ Split to just perform changes after the UNKNOWN_PAYMENT_HASH change --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
This is mainly just copying over the copy-editing from the
lightning-rfc repository.
[ Split to just perform changes prior to the UNKNOWN_PAYMENT_HASH change --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
It's more natural than using a zero-secret when something goes wrong.
Also note that the HSM will actually kill the connection if the ECDH
fails, which is fortunately statistically unlikely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently hand the feature set from lightningd, but that's confusing
if they were ever different.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need several notleak() annotations here:
1. The temporary structure which is handed to retry_peer_connected().
It's waiting for the master to respond to our connect_reconnected
message.
2. We don't keep a pointer to the io_conn for a peer, so we need to
mark those as not being a leak.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a very bounded leak, since we can only have one and it's
connected to the peer lifetime, but we don't need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It means an extra allocation at startup, but it means we can hide the definition,
and use standard patterns (new_daemon_conn and typesafe callbacks).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When the wrong key is used, the remote end simply hangs up.
We used to get a random errno, which tends to be "Operation now in progress."
Now it's defined to be 0, detect and provide a better error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was from a different series, so I just cherry-picked it.
It adds ccan/membuf as a depenency of ccan/rbuf, though we don't use
it directly yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I split the peer_connected() function into the peer_reconnected(),
which is basically an entire separate path from the rest of
peer_connected().
Also, removed unused TAKEN annotation from `id` parameter. Nobody actually
hands us take() there, and just as well, since we don't take it!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd is the only user of the cryptomsg async APIs; better to
open-code it here. We need to expose a little from cryptomsg(),
but we remove the 'struct peer' entirely from connectd.
One trick is that we still need to defer telling lightningd when a
peer reconnects (until it tells us the old one is disconnected). So
now we generate the message for lightningd and send it once we're woken.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only call it once, so don't free the "old" one. And fix some indenting.
And make hostname const.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That matches the other CSV names (HSM was the first, so it was written
before the pattern emerged).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@renepickhardt: why is it actually lightningd.c with a d but hsm.c without d ?
And delete unused gossipd/gossip.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We sweep looking for pointers to tal objects; we don't look for pointers
inside them. Thus lists only work transparently if they're at the head
of the object; so far this has been sufficient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To be safe, we should never memcmp secrets. We don't do this
currently outside tests, but we're about to.
The tests to prove this as constant time are the tricky bit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer need to keep 'struct peer' around: we free it as soon as
we hand off to the master daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. connect convenience variable for improved readabilty.
2. a comment explaining that timer is on channel, not HTLC.
3. use modern python style in test_htlc_send_timeout
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we have an address hint, we start with that, but we'll use
node_announcement information if required.
Note: we (ab)use the address hint when restoring from the database
or reconnecting, even if the connection was *incoming*. That meant
that the recipient of a connection would *never* manage to connect out.
We still don't take multiple addresses from the DNS seeds: I assume we
should, since there could be IPv4 and IPv6.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Include it as an optional field in the connect_to_peer message (it was
added before we had optional fields).
The only issue is that reconnects want it too, so again connectd hands
it back to master in connectctl_connect_failed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd tells master about every disconnection, and master knows
whether it's important to reconnect. Just get the master to invoke a new
connect command if it considers the peer important!
The only twist is timeouts: we don't want to immediately reconnect if
we've failed to connect. To solve this, connectd passes a 'delaytime'
to the master when a connection fails, and the master passes it back
when it asks for a connection.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to separate implicit connection requests (ie. timed retries
for important peers) and explicit ones, and send a
WIRE_CONNECTCTL_CONNECT_TO_PEER_RESULT for the latter.
In the success case, that's now redundant, since we hand the connected
peer to the master using WIRE_CONNECT_PEER_CONNECTED; we just need a
message for the failure case. And we might as well tell the master
every failure, so we don't have to distinguish internally.
This also solves a race we had before: connectd would send
WIRE_CONNECTCTL_CONNECT_TO_PEER_RESULT which completes the incoming
JSON connect command, then send WIRE_CONNECT_PEER_CONNECTED. So
there's a window where the JSON command can return, but the peer isn't
known to lightningd yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now simply maintain a pubkey set for connected peers (we only care
if there's a reconnect), not the entire peer structure.
lightningd no longer queries us for getpeers: it knows more than we do
already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for debugging: it wasn't immediately obvious from the logs
which side was spuriously reconnecting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. If the IPv6 address was public, that changed the wireaddr and thus the ipv4 bind
would not be to a wildcard and would fail.
2. Binding two fds to the same port on both wildcard IPv4 and IPv6 succeeds; we only
fail when we try to listen, so allow error at this point.
For some reason this triggered on my digital ocean machine.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Checking in the master doesn't help anything, and it's weird.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1diff --git a/connectd/connect.c b/connectd/connect.c
index 138b73fc..b01d1546 100644
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were failing test_closing_torture, with gossipd complaining that it
received a malformed packet. This makes it pass, but the real fix is
in the next series.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip_getnodes_entry was used by gossipd for reporting nodes, and for
reporting peers. But the local_features field is only available for peers,
and most other fields are only available from node_announcement.
Note that the connectd change actually means we get less information
about peers: gossipd used to do the node lookup for peers and include the
node_announcement information if it had it.
Since generate_wire.py can't create arrays-of-arrays, we add a 'struct
peer_features' to encapsulate the two feature arrays for each peer, and
for convenience we add it to lightningd/gossip_msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch guts gossipd of all peer-related functionality, and hands
all the peer-related requests to channeld instead.
gossipd now gets the final announcable addresses in its init msg, since
it doesn't handle socket binding any more.
lightningd now actually starts connectd, and activates it. The init
messages for both gossipd and connectd still contain redundant fields
which need cleaning up.
There are shims to handle the fact that connectd's wire messages are
still (mostly) gossipd messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossipd does a two-step initialization: it only tries to create the
listening sockets when it's activated. This means it doesn't know the
addresses to announce until this point.
Now connectd is doing this, this would mean we'd have to tell gossipd
later ("oh, BTW here are your addresses") since we need to start gossipd
before connectd activation.
So make connectd do all the setup, but only actually listen on the fds
once we activate it. We clone the gossip_init message into
connect_wire.csv. The master daemon still waits for a reply from
connectd for the activate message, since it wants to be listening
before it prints "Server started".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This still has a problem, but we can't fix that easily here; per-peer
daemons don't have this trouble, however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is just copying most of gossipd/gossip.c into connectd/connect.c.
It shares the same wire format as gossipd during transition, and changes
are deliberately minimal.
It also has an additional message 'connect_reconnected' which it sends
to the master daemon to tell it to kill a peer; gossipd relied on
closing the gossipfd to do this, but connectd doesn't maintain an fd
with remote peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
