When starting up with a populated addrman, ThreadDNSAddressSeed adds a delay
during which time the node may be able to connect to some peers. This commit
tests the delay changes based on the number of addresses in the addrman.
Test that passing conflicting parameters for the two causes a startup error.
This logic also impacts -connect, which soft sets -dnsseed, so add a test for
that too.
When a node is able to properly shutdown, it will persist its block-relay-only
connections to the addrman. On startup, it will attempt to reconnect to these
anchors. Since block-relay-only connections do not participate in ADDR relay,
succesful connections are insufficient to skip querying the DNS seeds.
This test fails prior to the changes in #22013.
Co-authored-by: Martin Zumsande <mzumsande@gmail.com>
This commit introduces a DNS seed to the regest chain params in order to add
coverage to the DNS querying logic.
The first test checks that we do not query DNS seeds if we are able to
succesfully connect to 2 outbound connections. Since we participate in ADDR
relay with those connections, including sending a GETADDR message during the
VERSION handshake, querying the DNS seeds is unnecessary.
Co-authored-by: Martin Zumsande <mzumsande@gmail.com>
4bea301692 test: use P2PK-MiniWallet for feature_csv_activation.py (Sebastian Falbesoner)
dc7eb64e83 test: MiniWallet: add P2PK support (Sebastian Falbesoner)
Pull request description:
This PR adds support for creating and spending transactions with raw pubkey (P2PK) outputs to MiniWallet, [as suggested by MarcoFalke](https://github.com/bitcoin/bitcoin/pull/21900#discussion_r629524841). Using that mode in the test `feature_csv_activation.py`, all txs submitted to the mempool follow the standard policy, i.e. `-acceptnonstdtxn=1` can be removed.
Possible follow-ups:
* Improve MiniWallet constructor Interface; an enum-like parameter instead of two booleans would probably be better
* Look at other tests that could benefit from P2PK (e.g. feature_cltv.py?)
* Check vsize also for P2PK txs (vsize varies due to signature, i.e. a range has to be asserted)
ACKs for top commit:
laanwj:
Code review ACK 4bea301692
Tree-SHA512: 9b428e6b7cfde59a8c7955d5096cea88af1384a5f49723f00052e9884d819d952d20a5ab39bb02f9d8b6073769c44462aa265d84a33e33da33c2d21670c488a6
Using the MiniWallet in P2PK mode, all transactions submitted to the
mempool are following the standard policy now, i.e. the node command
line parameter '-acceptnonstdtxn=1' is not needed anymore.
9c891b64ff net: initialize nMessageSize to max uint32_t instead of -1 (eugene)
Pull request description:
nMessageSize is uint32_t and is set to -1. This will warn with `-fsanitize=implicit-integer-sign-change` when V1TransportDeserializer calls into the ctor. This pull initializes nMessageSize to `numeric_limits<uint32_t>::max()` instead and removes the ubsan suppression.
ACKs for top commit:
laanwj:
Code review ACK 9c891b64ff
promag:
Code review ACK 9c891b64ff.
Tree-SHA512: f05173d9553a01d207a5a7f8ff113d9e11354c50b494a67d44d3931c151581599a9da4e28f40edd113f4698ea9115e6092b2a5b7329c841426726772076c1493
bd7f27d16d refactor: feature_csv_activation.py: move tx helper functions to methods (Sebastian Falbesoner)
2eca46b0aa test: use MiniWallet for feature_csv_activation.py (Sebastian Falbesoner)
Pull request description:
This PR enables one more of the non-wallet functional tests (feature_csv_activation.py) to be run even with the Bitcoin Core wallet disabled by using the new MiniWallet instead, as proposed in #20078.
Short reviewers guideline:
- Since we exclusively work with anyone-can-spend outputs here (raw scriptPubKey = OP_TRUE), signing is not needed anymore. The function `sign_transaction` and its calls are removed, after changing a tx (e.g. its scriptSig or nVersion) a simple `.rehash()` call is sufficient. Also, generating an address `self.nodeaddress` (and with that, passing it to the the various test tx creation/sending helper methods) is not needed anymore and removed.
- The test repeatedly uses the same input for creating different txs (e.g. with different txversions 1 and 2). To let `MiniWallet` create a tx with a specific input, we have to call `.get_utxo()` before which also marks the UTXO as spent. The method is changed to also support keeping the UTXO in its internal list (`mark_as_spent=False`). With the behaviour on master, the second call to `.get_utxo()` with the same input would fail.
- To keep the diff in the first commit short, the `miniwallet` is set as a global variable, to avoid passing it on every tx creation/spending helper. The global is eliminated in the second (refactoring) commit, where all the helpers are moved to the test class as methods. By that, we can use `self.nodes[0]` directly in the helpers and don't have to pass it again and again. I think there could still be a lot of improvements/refactoring done in the test, but that should hopefully serve as a good basis.
ACKs for top commit:
laanwj:
Code review ACK bd7f27d16d
MarcoFalke:
review ACK bd7f27d16d🐕
Tree-SHA512: 24fb6a0f7702bae40d5271d197119827067d4b597e954d182e4c1aa5d0fa870368eb3ffed469b26713fa8ff8eb3ecc06abc80b2449cd68156d5559e7ae8a2b11
11d6459b6e rpc: include_unsafe option for fundrawtransaction (t-bast)
Pull request description:
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning nodes using anchor outputs) are very limited if they can only use safe inputs.
I also added this option to `send` and `walletcreatefundedpsbt` who internally delegate to `fundrawtransaction`.
Fixes#21299
ACKs for top commit:
laanwj:
Code review ACK 11d6459b6e
Tree-SHA512: 5e542a4febcfd6f41cf784678ff02ec9282eae2082c274983f72c5ea87b7ebbe1bd5fdc6a020d7a9d5996157754eb4966b8aeb6c1ceebf0b1519f735579b8bac
847288df07 test: fee rate values that cannot be represented as sat/vB (Jon Atack)
06a90fa038 rpc: for sat/vB fee rates, limit ParseFixedPoint decimals to 3 (Jon Atack)
0742c7840f rpc: enable passing decimals to AmountFromValue, add doxygen (Jon Atack)
8ce3ef57a3 test: ParseFixedPoint with 3 decimals for sat/vB fee rates (Jon Atack)
b503327597 test: type error and out of range fee rates where missing (Jon Atack)
c5fd4344f7 test: explicit fee rates with invalid amounts (Jon Atack)
ea6f76b66e test: improve zero-value explicit fee rate coverage (Jon Atack)
Pull request description:
- Improve/close gaps in existing test coverage before making the change
- Enable passing `decimals` to `ParseFixedPoint()` when calling `AmountFromValue()`
- Limit explicit fee rates in sat/vB passed in by users to 3 decimals, and raise otherwise
- Add regression test coverage
Closes#20534.
ACKs for top commit:
MarcoFalke:
review ACK 847288df07🔷
Tree-SHA512: c539d07ae9b21c0d6c8ea460beb9c8dad5559445518aace560abc3c05c588907bae189b6fd7602b3b397de4a42356136c3ec6f960d3dcf2d5d16377aef4ab5a2
This allows to get rid of the global miniwallet variable and to specify
the used node self.nodes[0] at only one place, instead of passing it to
every tx creation/send method again and again.
Can be reviewed with --ignore-all-space --color-moved=dimmed-zebra
09205b33aa net: Clarify message header validation errors (W. J. van der Laan)
955eee7680 net: Sanitize message type for logging (W. J. van der Laan)
Pull request description:
- Use `SanitizeString` when logging message errors to make sure that the message type is sanitized. I have checked all logging in `net.cpp`.
- For the `MESSAGESTART` error don't inspect and log header details at all: receiving invalid start bytes makes it likely that the packet isn't even formatted as valid P2P message. Logging the four unexpected start bytes (as hex) should be enough.
- Update `p2p_invalid_messages.py` test to check this.
- Improve error messages in a second commit.
Issue reported by gmaxwell.
ACKs for top commit:
MarcoFalke:
re-ACK 09205b33aa only change is log message fixup 🔂
practicalswift:
re-ACK 09205b33aa
Tree-SHA512: 8fe5326af135cfcf39ea953d9074a8c966b9b85a810b06a2c45b8a745cf115de4f321e72fc769709d6bbecfc5953aab83176db6735b04c0bc6796f59272cadce
2227fc4e62 test: minor fixes & improvements for files linter test (windsok)
Pull request description:
Couple of minor fixes & improvements for files linter test added in #21740
- Use a context manager when opening files, so that files are closed are we are done with them
- Use the `-z` flag when shelling out to `git ls-files` so that we can catch newlines and other weird control characters in filenames.
From the `git ls-files` manpage:
```
-z \0 line termination on output and do not quote filenames. See OUTPUT below for more information.
Without the -z option, pathnames with "unusual" characters are quoted as explained for the configuration variable
core.quotePath (see git-config(1)). Using -z the filename is output verbatim and the line is terminated by a NUL byte.
```
ACKs for top commit:
MarcoFalke:
cr ACK 2227fc4e62
practicalswift:
cr ACK 2227fc4e62: patch looks correct
Tree-SHA512: af059a805f4a7614162de85dea856052a45ab531895cb0431087e7fc9e037513fa7501bb5eb2fe43238adf5f09e77712ebdbb15b1486983359ad3661a3da0c60
Updates the lint-files.py lint test:
* Use a context manager when opening files, so that files are closed.
* Use the -z flag when shelling out to git ls-files so that we can catch newlines
and other weird control characters in filenames
- Use `SanitizeString` when logging message errors to make sure that the
message type is sanitized.
- For the `MESSAGESTART` error don't inspect and log header details at
all: receiving invalid start bytes makes it likely that the packet isn't
even formatted as valid P2P message. Logging the four unexpected start
bytes should be enough.
- Update `p2p_invalid_messages.py` test to check this.
Issue reported by gmaxwell.
9f767e8438 test: use MiniWallet for p2p_blocksonly.py (Sebastian Falbesoner)
Pull request description:
This PR enables one more of the non-wallet functional tests (p2p_blocksonly.py) to be run even with the Bitcoin Core wallet disabled by using the new MiniWallet instead, as proposed in #20078.
Note that MiniWallet creates segwit transactions by default, i.e. txid and wtxid are not identical and we have to return both from `check_p2p_tx_violation(...)`: wtxid is needed to match an expected `"received getdata for: wtx ..."` debug output, whereas the txid is needed to wait for a certain tx via `wait_for_tx(...)`.
ACKs for top commit:
jonatack:
ACK 9f767e8438 tested with `--disable-wallet`
Tree-SHA512: f08001f02c3c310ccdf713af0ba17304368a36414f412749908bbe8c03ad1e902190b8768b79f3b4909855762f285e7ab1b627cc4f45c90b42bb097a43cb4318
fa03d0acd6 fuzz: Create a block template in tx_pool targets (MarcoFalke)
fa61ce5cf5 fuzz: Limit mocktime to MTP in tx_pool targets (MarcoFalke)
fab646b8ea fuzz: Use correct variant of ConsumeRandomLengthString instead of hardcoding a maximum size (MarcoFalke)
fae2c8bc54 fuzz: Allow to pass min/max to ConsumeTime (MarcoFalke)
Pull request description:
Relatively simple check to ensure a block can always be created from the mempool
ACKs for top commit:
practicalswift:
Tested ACK fa03d0acd6
Tree-SHA512: e613376ccc88591cbe594db14ea21ebc9b2b191f6325b3aa4ee0cd379695352ad3b480e286134ef6ee30f043d486cf9792a1bc7e44445c41045ac8c3b931c7ff
91d93aac4e validation: remove nchaintx from assumeutxo metadata (James O'Beirne)
931684b24a validation: fix ActivateSnapshot to use hardcoded nChainTx (James O'Beirne)
Pull request description:
This fixes an oversight from the move of nChainTx from the user-supplied
snapshot metadata into the hardcoded assumeutxo chainparams.
Since the nChainTx is now unused in the metadata, it should be removed
in a future commit.
See: https://github.com/bitcoin/bitcoin/pull/19806#discussion_r612165410
ACKs for top commit:
Sjors:
utACK 91d93aac4e
ryanofsky:
Code review ACK 91d93aac4e. No change to previous commit, just new commit removing now unused utxo snapshot field and updating tests.
Tree-SHA512: 445bdd738faf007451f40bbcf360dd1fb4675e17a4c96546e6818c12e33dd336dadd95cf8d4b5f8df1d6ccfbc4bf5496864bb5528e416cea894857b6b732140c
46b025e00d test: add new python linter to check file names and permissions (windsok)
6f6bb3ebc7 test: fix file permissions on various scripts (windsok)
Pull request description:
Adds a new python linter test which tests for correct filenames and file permissions in the repository.
Replaces the existing tests in the `test/lint/lint-filenames.sh` and `test/lint/lint-shebang.sh` linter tests, as well as adding some new and increased testing. This increased coverage is intended to catch issues such as in #21728 and https://github.com/bitcoin/bitcoin/pull/16807/files#r345547050
Summary of tests:
* Checks every file in the repository against an allowed regexp to make sure only lowercase or uppercase alphanumerics (a-zA-Z0-9), underscores (_), hyphens (-), at (@) and dots (.) are used in repository filenames.
* Checks only source files (*.cpp, *.h, *.py, *.sh) against a stricter allowed regexp to make sure only lowercase alphanumerics (a-z0-9), underscores (_), hyphens (-) and dots (.) are used in source code filenames. Additionally there is an exception regexp for directories or files which are excepted from matching this regexp (This should replicate the existing `test/lint/lint-filenames.sh` test)
* Checks all files in the repository match an allowed executable or non-executable file permission octal. Additionally checks that for executable files, the file contains a shebang line.
* Checks that for executable `.py` and `.sh` files, the shebang line used matches an allowable list of shebangs (This should replicate the existing `test/lint/lint-shebang.sh` test)
* Checks every file that contains a shebang line to ensure it has an executable permission
Additionally updates the permissions on various files to comply with the new tests.
Fixes#21729
ACKs for top commit:
practicalswift:
cr re-ACK 46b025e00d: patch still looks correct
kiminuo:
code review ACK 46b025e00d if `contrib/gitian-descriptors/assign_DISTNAME` permission change is deemed OK.
laanwj:
Code review ACK 46b025e00d
Tree-SHA512: 1c8201a2cee0d9cbce15652b68cec9a6458a8b493fcd5392f98560aca0b1a12e668baab65a47100f116f626dadc3f591deb47f7368468c6a46c6c712c2533455
f09e6b2585 test: fix off-by-ones in rpc_fundrawtransaction (Jon Atack)
Pull request description:
The variables in these assertions should be the same within each line.
ACKs for top commit:
laanwj:
ACK f09e6b2585
theStack:
ACK f09e6b2585
Tree-SHA512: 7ac754eaadd8cb00a725afa55bccbb8de7547dedac9350d79a9a470918245617e075c56a91adc36fb653bbe8a0a325d59b00443155a7e1a81ebf22e4e4cf56d9
fa066f1b66 test: Run feature_cltv with MiniWallet (MarcoFalke)
fa5591d38c test: Hide tx rehash in helper (MarcoFalke)
fa5f938cfe test: Remove new_tx reference (MarcoFalke)
Pull request description:
Allows to run the test even with no wallet compiled in
ACKs for top commit:
theStack:
ACK fa066f1b66💽
Tree-SHA512: 3f659a178ba3ee0baffd70fddf8b8a68e5551d85626c7f254b234d7f75e6a16430a32a7952037db358b579f045b4d296b46156f72e5d226f3e80334dc635ca10
ebd4be43cc doc: add release notes for 20867 (Antoine Poinsot)
5aa50ab9cc rpc/util: multisig: only check redeemScript size is <= 520 for P2SH (Antoine Poinsot)
063df9e897 test/functional: standardness sanity checks for P2(W)SH multisig (Antoine Poinsot)
ae0429d3af script: allow up to 20 keys in wsh() descriptors (Antoine Poinsot)
9fc68faf35 script: match multisigs with up to MAX_PUBKEYS_PER_MULTISIG keys (Antoine Poinsot)
Pull request description:
As described in https://github.com/bitcoin/bitcoin/issues/20620 multisigs are currently limited to 16 keys in descriptors and RPC helpers, even for P2WSH and P2SH-P2WSH.
This adds support for multisig with up to 20 keys (which are already standard) for Segwit v0 context for descriptors (`wsh()`, `sh(wsh())`) and RPC helpers.
Fixes https://github.com/bitcoin/bitcoin/issues/20620
ACKs for top commit:
meshcollider:
re-utACK ebd4be43cc
instagibbs:
re-ACK ebd4be43cc
Tree-SHA512: 36141f10a8288010d17d5c4fe8d24878bcd4533b88a8aba3a44fa8f74ceb3182d70fee01427e0ab7f53ce7fab46c88c1cd3ac3b18ab8a10bd4a6b8b74ed79e46
c5bb142817 test: resolve bug in test/functional/interface_bitcoin_cli.py - Test -getinfo with -rpcwallet=unloaded wallet returns no balances (klementtan)
Pull request description:
I think there is a bug in this test case where the new value of `cli_get_info` is not asserted.
ACKs for top commit:
jonatack:
ACK c5bb142817
Tree-SHA512: 50c0c2c8fe63c95f951dee892fbacedf92208f47efe5ed481fbb255f15137c799d9200fa3ff31a442df0691248d7ff04d899842722c3032cd7f35553622ba38c
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning
nodes using anchor outputs) are very limited if they can only use safe inputs.
Fixes#21299
5f96d7d22d rpc: gettxoutsetinfo rejects hash_serialized_2 for specific height (Fabian Jahr)
23fe50436b test: Add test for coinstatsindex behavior in reorgs (Fabian Jahr)
90c966b0f3 rpc: Allow gettxoutsetinfo and getblockstats for stale blocks (Fabian Jahr)
b9362392ae index, rpc: Add use_index option for gettxoutsetinfo (Fabian Jahr)
bb7788b121 test: Test coinstatsindex robustness across restarts (Fabian Jahr)
e0938c2909 test: Add tests for block_info in gettxoutsetinfo (Fabian Jahr)
2501576ecc rpc, index: Add verbose amounts tracking to Coinstats index (Fabian Jahr)
655d929836 test: add coinstatsindex getindexinfo coverage, improve current tests (Jon Atack)
ca01bb8d68 rpc: Add Coinstats index to getindexinfo (Fabian Jahr)
57a026c30f test: Add unit test for Coinstats index (Fabian Jahr)
6a4c0c09ab test: Add functional test for Coinstats index (Fabian Jahr)
3f166ecc12 rpc: gettxoutsetinfo can be requested for specific blockheights (Fabian Jahr)
3c914d58ff index: Coinstats index can be activated with command line flag (Fabian Jahr)
dd58a4de21 index: Add Coinstats index (Fabian Jahr)
a8a46c4b3c refactor: Simplify ApplyStats and ApplyHash (Fabian Jahr)
9c8a265fd2 refactor: Pass hash_type to CoinsStats in stats object (Fabian Jahr)
2e2648a902 crypto: Make MuHash Remove method efficient (Fabian Jahr)
Pull request description:
This is part of the coinstats index project tracked in #18000
While the review of the new UTXO set hash algorithm (MuHash) takes longer recently #19328 was merged which added the possibility to run `gettxoutsetinfo` with a specific hash type. As the first type it added `hash_type=none` which skips the hashing of the UTXO set altogether. This alone did not make `gettxoutsetinfo` much faster but it allows the use of an index for the remaining coin statistics even before a new hashing algorithm has been added. Credit to Sjors for the idea to take this intermediate step.
Features summary:
- Users can start their node with the option `-coinstatsindex` which syncs the index in the background
- After the index is synced the user can use `gettxoutsetinfo` with `hash_type=none` or `hash_type=muhash` and will get the response instantly out of the index
- The user can specify a height or block hash when calling `gettxoutsetinfo` to see coin statistics at a specific block height
ACKs for top commit:
Sjors:
re-tACK 5f96d7d22d
jonatack:
Code review re-ACK 5f96d7d22d per `git range-diff 13d27b4 07201d3 5f96d7d`
promag:
Tested ACK 5f96d7d22d. Light code review ACK 5f96d7d22d.
Tree-SHA512: cbca78bee8e9605c19da4fbcd184625fb280200718396c694a56c7daab6f44ad23ca9fb5456d09f245d8b8d9659fdc2b3f3ce5e953c1c6cf4003dbc74c0463c2
