Use stricter criteria when deciding which of the taker's accounts (if
any) are valid for a given offer. Specifically, prevent National Bank
accounts from being used to take Same / Specific Bank(s) offers, so the
three payment method types can never being mixed.
This prevents an error on the trading peer when the trade starts, due to
enforcement of equal maker & taker payment method IDs (except for SEPA)
in the Contract payload constructor.
This partially addresses #3602, where the erroneous peer response causes
the taker to be presented with a confusing timeout.
Remove redundant stubs from the MoneyGram and Western Union tests and
ensure that all such stubs result in failure. In particular, the 'offer'
mock is never accessed directly by ReceiptValidator.
This prevents a scammer to use publicly known account details
(without being in control of the account) as a seller to get
signed by a buyer. The money received in the seller account might
not be detected by the legitimate owner and/or the money not sent back.
30 days later the scammer could use this signed account as seed to peer sign other stolen accounts.
Addresses the first half of #3629 by ensuring that the reconstructed
HashMap always has the 32-byte key for each payload.
It turns out, the TempProposalStore persists the ProtectedStorageEntrys
on-disk as a List and doesn't persist the key at all. Then, on
reconstruction, it creates the 20-byte key for its internal map.
The fix is to update the TempProposalStore to use the 32-byte key instead.
This means that all writes, reads, and reconstrution of the TempProposalStore
uses the 32-byte key which matches perfectly with the in-memory map
of the P2PDataStorage that expects 32-byte keys.
Important to note that until all seednodes receive this update, nodes
will continue to have both the 20-byte and 32-byte keys in their HashMap.
Now that the only user of this interface has been removed, go ahead
and delete it. This is a partial revert of
f5d75c4f60 that includes the code that was
added into ProposalService that subscribed to the P2PDataStore.
#3143 identified an issue that tempProposals listeners were being
signaled once for each item that was removed during the P2PDataStore
operation that expired old TempProposal objects. Some of the listeners
are very expensive (ProposalListPresentation::updateLists()) which results
in large UI performance issues.
Now that the infrastructure is in place to receive updates from the
P2PDataStore in a batch, the ProposalService can apply all of the removes
received from the P2PDataStore at once. This results in only 1 onChanged()
callback for each listener.
The end result is that updateLists() is only called once and the performance
problems are reduced.
This removes the need for #3148 and those interfaces will be removed in
the next patch.
Previously, this interface was called each time an item was changed. This
required listeners to understand performance implications of multiple
adds or removes in a short time span.
Instead, give each listener the ability to process a list of added or
removed entrys which can help them avoid performance issues.
This patch is just a refactor. Each listener is called once for each
ProtectedStorageEntry. Future patches will change this.
* Remove trailing spaces
* Add toProtoTradeStatistics2 method
API will use getTradeStatistics and expect TradeStatistics2 not
PersistableNetworkPayload
* Add CreateOfferService class
* Remove commented out code
* User weaker access, add final
* Add getRandomOfferId method
* Add getSellerSecurityDeposit method
* Add getEstimatedFeeAndTxSize method
- Rename estimateTxSize to updateEstimatedFeeAndTxSize
- Add getEstimatedFeeAndTxSize method to CreateOfferService
- Add dependent methods and fields
* Use methods from createOfferService
- Use getBuyerSecurityDepositAsCoin and getSellerSecurityDepositAsCoin
from CreateOfferService
* Use txFeeFromFeeService from createOfferService
- Use getEstimatedFeeAndTxSize from CreateOfferService for
txFeeFromFeeService
* Use getPriceAsLong from createOfferService
* Use marketPriceMarginParam from createOfferService
* Pass useMarketBasedPriceValue to getPriceAsLong
* Use getMaxTradeLimit from createOfferService
* Use createAndGetOffer from createOfferService
* Remove unused fields
* Add createOfferService, remove unused params
* Use weaker access
* Add null checks
* Add log of params, Cleanup
* Remove unused fields
* Use weaker access
* Remove trivial methods
* Remove trivial methods, rename methods
* Sort params for offer as they are used
* Use getReservedFundsForOffer from createOfferService
* Add MakerFeeProvider
* Adjust to new super class params
* Remove sellerSecurityDeposit field, refactor placeOffer
* Adjust tests to new params
* Don't extend ActivatableViewAndModel when the model is empty
Remove the no-arg constructor from ActivatableViewAndModel, which sets
a dummy Activatable singleton as the model. (Since the model type param
can't be checked at runtime, improper use of the constructor could cause
heap pollution.)
Instead, extend 'ActivatableView<R, Void>' consistently, as other views
without a model currently do.
* Improve type safety of the fluent interface of Overlay<T>
Refactor all the unchecked casts from Overlay<T> to T into a single
private cast() method. Also add a runtime type check to the constructor
to prevent creation of window objects of the form "A extends Overlay<B>"
for unrelated A & B, as such casts would then subvert the type system.
* Improve type safety of ProtoUtil.collectionToProto(Collection)
Add a Class<T> parameter to the method, in order to avoid an unchecked
cast to the Message type T. The cast was wrapped in a try-catch block,
which is useless due to erasure, so use Class.cast(..) instead.
* Avoid raw types to prevent unchecked casts in Log.java
Add missing ILoggingEvent type arg to local variable declarations.
* Avoid unchecked casts when deserializing JSON using Gson
* Fix unchecked casts in views due to raw chart point types
Add missing 'Number' coord type args to some XYChart.(Data|Series) &
AreaChart declarations, and avoid passing them as generic varargs, in
order to eliminate some more unchecked cast warnings.
Also simplify OfferBookChartView.updateChartData() by unboxing the x-
coordinate of each (buy & sell) datapoint.
* Avoid raw type bounds in class declarations to fix unchecked warnings
Make sure the generic classes MutableOfferView & AgentRegistrationView
don't use raw bounds for their associated view models, as that leads to
unchecked assignments from the model fields further down.
* Fix some remaining suppressed unchecked casts in the UI logic
(This still leaves a few more which are hard to avoid.)
* Fix a few remaining unsuppressed unchecked warnings
Fixes issues #3601 and #3537.
The bug only happens when the offer has MIN-MAX value range.
The new isAmountValidForOffer in PaymentAccountUtil.java consider only the MAX amount, but the button to take the offer is ungrayed considering the MIN amount, which causes the bug.
Add a Class<T> parameter to the method, in order to avoid an unchecked
cast to the Message type T. The cast was wrapped in a try-catch block,
which is useless due to erasure, so use Class.cast(..) instead.
* Updating trading instructions for XMR (Monero)
Prove payments:
- clarifying that the official wallets (Monero GUI or CLI) are NOT required to send XMR, since user can use some alternative wallets (desktop: MyMonero, Exodus / mobile: Cake Wallet, MyMonero, Monerujo) that provide the information required to prove a payment (transaction key, transaction ID and destination address). This information is not provided by the remaining desktop and mobile wallets that currently support Monero, but since they could provide it in the future, I kept the warning about using other wallets different from the previously mentioned.
- listing Monero GUI as first option (for most users), and CLI as second option (for advanced users)
- renaming "transaction hash" to "transaction ID", which is used in official wallets
- renaming "tx private key" to "transaction key", which is used in official wallets
- adding "Secret key" as synonymous for "transaction key" (used in MyMonero wallet)
- adding "destination address" and keeping "recipient's address" as synonymous
- renaming History tab to Transactions tab in Monero GUI
- adding "save recipient address" option must be enabled in Cake Wallet settings
Check payments:
- adding Monero GUI must be in Advanced mode
- adding Monero GUI verification must be done in Check Transaction section of Prove/check page
- adding parameters TXID TXKEY ADDRESS to the command check_tx_key in Monero CLI, as instructions in (https://www.getmonero.org/resources/user-guides/prove-payment.html)
- adding Explore Monero website (https://www.exploremonero.com/receipt) as alternative to verify payments
- removing payment ID instructions (it is being deprecated at the end of November in v0.15)
More info:
- directing to subreddit Monero support (https://www.reddit.com/r/monerosupport/), which is actively maintained, instead of Monero forum (https://forum.getmonero.org).
* Add max allowed message option to Popup and increase window size for Monero to improve readability
Switch from System.currentTimeMills() to
Clock.millis() so dependency injection can
be used for tests that need finer control of time.
This involves attaching a Clock to the resolver
so all fromProto methods have one available when they
reconstruct a message. This uses the Injector for the APP
and a default Clock.systemDefaultZone is used in the manual
instantiations.
Work was already done in #3037 to make this possible.
All tests still use the default system clock for now.
* Update MobileModel parseDescriptor to support iPhone 11
It was parsing only the first digit of the version and using that in a
comparison check to determine if the version is greater than 5.
This meant for the iPhone 11 it was comparing 1 > 5, returning an
incorrect result.
It now supports multi-digit version numbers (i.e. 11), including
support for a suffix in the version (i.e. 11S), just in case...
* Update to reflect isContentAvailable supports iPhone 6s and newer
Prove payments:
- clarifying that the official wallets (Monero GUI or CLI) are NOT required to send XMR, since user can use some alternative wallets (desktop: MyMonero, Exodus / mobile: Cake Wallet, MyMonero, Monerujo) that provide the information required to prove a payment (transaction key, transaction ID and destination address). This information is not provided by the remaining desktop and mobile wallets that currently support Monero, but since they could provide it in the future, I kept the warning about using other wallets different from the previously mentioned.
- listing Monero GUI as first option (for most users), and CLI as second option (for advanced users)
- renaming "transaction hash" to "transaction ID", which is used in official wallets
- renaming "tx private key" to "transaction key", which is used in official wallets
- adding "Secret key" as synonymous for "transaction key" (used in MyMonero wallet)
- adding "destination address" and keeping "recipient's address" as synonymous
- renaming History tab to Transactions tab in Monero GUI
- adding "save recipient address" option must be enabled in Cake Wallet settings
Check payments:
- adding Monero GUI must be in Advanced mode
- adding Monero GUI verification must be done in Check Transaction section of Prove/check page
- adding parameters TXID TXKEY ADDRESS to the command check_tx_key in Monero CLI, as instructions in (https://www.getmonero.org/resources/user-guides/prove-payment.html)
- adding Explore Monero website (https://www.exploremonero.com/receipt) as alternative to verify payments
- removing payment ID instructions (it is being deprecated at the end of November in v0.15)
More info:
- directing to subreddit Monero support (https://www.reddit.com/r/monerosupport/), which is actively maintained, instead of Monero forum (https://forum.getmonero.org).
* Improve handling of failed trades and offers
- Check if deposit tx is null
- Check if trade fee tx is rejected
- Listen to reject tx errors
- Cleanup addressEntryList
- Prevent opening disputes with if deposit tx is null
- Add null checks
- Improve logs
- Cleanups
* Add move to failed trade button to popup
In case the deposit tx is null we show a popup telling the user to move
the trade to failed trades after a restart if the problem persist.
* Change log level
* Limit max. nr. of PersistableNetworkPayload and ProtectedStorageEntry to 10000
To avoid that seed nodes get overloaded with requests for too many
PersistableNetworkPayload and ProtectedStorageEntry data we limit nr. of
entries to max 10000.
* Add peers node address to logs
* Improve logs
- Add log of size to GetBlocksResponse.toProtoNetworkEnvelope method
- Log in kb
* Log connection UID if not peer address available
* Add cleanup code or invalid objects
We have an invalid Filter object in the live network (prob. some dev
made some mistake). This code helps so clean that up.
* Add log
* New trade protocol (#3333)
* Remove arbitration key, cleanup
* Add BuyerAsMakerProcessDepositTxAndDelayedPayoutTxMessage
* Adopt trade protocol
- Add handler for DepositTxAndDelayedPayoutTxMessage
- Change handler for DepositTxPublishedMessage
- Add MakerSetsLockTime
- Rename MakerProcessPayDepositRequest to MakerProcessPayDepositRequest
- Rename MakerSendPublishDepositTxRequest to MakerSendsProvideInputsForDepositTxMessage
- Rename DepositTxPublishedMessage to DelayedPayoutTxSignatureRequest
- Rename MakerProcessDepositTxPublishedMessage to MakerAsBuyerProcessSignDelayedPayoutTxMessage
* Remove arbitratorKey
* Add new classes
* Add new message classes
* Add new task classes
* Renamed classed (no functional change yet)
* Add lockTime
* Add delayedPayoutTxSignature field
* Add useReimbursementModel field
* Add new classes
* Add setting.preferences.useReimbursementModel
* Apply renamed classes (new classes not added yet)
* Add useReimbursementModel
* Add preferences param
* Add new methods, cleanup
* Add daoFacade param, apply renaming
* Add delayedPayoutTx, lockTime and delayedPayoutTxId
- Support daoFacade param
* Remove DirectMessage interface
* Rename emergencySignAndPublishPayoutTx method, add new one for 2of2 MS
* Apply new protocol
* Apply new protocol
* Add renaming (no functional change yet)
* Add new messages, apply renaming
* Remove unneeded P2SHMultiSigOutputScript
* Remove PREFERRED_PROJECT_CODE_STYLE
* Refactor: Rename class
* Use InputsForDepositTxRequest instead of TradeMessage in handleTakeOfferRequest
* Do not sign deposit tx if maker is seller
We change behaviour that the maker as seller does not send the pre
signed deposit tx to the taker as the seller has more to lose and he
wants to control the creation process of the delayed payout tx.
* Apply new trade protocol to seller as maker version
* Apply new trade protocol
Delayed payout tx are now working for all scenarios but we use a small
hack to get around an issue with not receiving confirmations and the
peers tx.
We add a tiny output to both peers, so we see the tx and confirmation.
Without that only the publisher sees the tx and confirmations are not
displayed. Need further work to get that working without that extra
outputs.
* Set TRADE_PROTOCOL_VERSION to 2
* Add PeerPublishedDelayedPayoutTxMessage
We need add the delayed payout tx to the wallet once the peer publishes
it. We will not see the confidence as we do not receive or sent funds
from our address. Same is with dispute payouts where one peer does not
receive anything. Then the confidence is not set. It seems that is a
restriction in BitcoinJ or it requires some extra handling. We set the
confidence indicator invisible in the dispute case and that might be an
acceptable option here as well.
* Add refund agent domain
* Add refundAgentNodeAddress
* Apply refund domain
* Add refund views
* Apply refundAgent domain
* Support refundAgent
* Remove useReimbursementModel field
We dont need in the offer anymore the decision if reimbursement or
arbitration is chosen.
* Apply refundAgent payout
* Handle tx info and balances
* Remove mediation activation
* Add new tac accepted flag for v1.2.0 and adjust text
* Fix params for test classes
* Signed witness trading (#3334)
* Added basic UI for account signing for arbitrators
* Add domain layer for signed account age witnesses (credits ManfredKarrer and oscarguindzberg)
* Remove testing gridlines
* Arbitrator sign accountAgeWitnesses
Automatically filter to only sign accounts that
- have chargeback risk
- bought BTC
- was winner in dispute
* Handle chargebackrisk by currency
* Check winners only for closed disputes
* Show sign status of paymentaccounts in AccountsView
* Rename service to accountAgeWitnessService
* Refactor: Move account signing helpers to AccountAgeWitnessService
* Refactor: rename hasSignedWitness to myHasSignedWitness
* Show if witness is signed in offerbook view
* Use witness sign age for age comparison
* Refactor: rename to isTaker... to isMyTaker...
* Allow trading with signed witnesses
* Use witness age for showing account age icon
* Move AccountAgeRestrictions into AccountAgeWitnessService
* Handle trade limit of unverified accounts as normal case
* Avoid optional as argument
* Set trade limit depending on trade direction
* Avoid optional arguments
* Add text for seller as signer
* Seller with signer privilege signs buyer witness
* Fix merge issues
* Remove explicit check for risky offers
* Remove sellers explicit account age check
* Add limit check based on common accountAgeWitness function
* Fix arbitrator key event handling
* Filter accounts on tradelimit instead of maturity
* Fix test
* Buyer sign seller account
Add SIGNED_ACCOUNT_AGE_WITNESS capability
* Fix checks for signing at end of trade
Get correct valid accounts for offer
* Rename BuyerDataItem -> TraderDataItem
* Arbitrator sign both parties in a buyer payout dispute
* Only sign unsigned accountAgeWitnesses
* Remove unused code
* Add demo for material design icons
* Use different account age limits for sell/buy
* Fix signing interface for arbitrator
* Add signing state column to offer book
* Add signing state to fiat accounts overview
* Add signing state to selected fiat account
* Fix popover padding
* Add account signing state to peer info popup
* Retrieve only unsigned witnesses for arbitrator to sign
* Accounts signed by arbitrators are signers
* Disable test due to travis issues
* Improve witness handling (#3342)
* Fix comparison
* Add display strings for witness sign state
* Fix immaturity check
* Use accountAgeWitness age for non risky payment methods
* Show information about non risky account types
* Fix peer info icon account age text
* Complete new trade protocol (#3340)
* Improve handling of adding tx to wallet
* Add delayedPayoutTx to dispute
* Fix test
* Use RECIPIENT_BTC_ADDRESS from DAO for trade fee
* Set lockTime to 10 days for altcoins, 20 days others.
- Devmode uses 1 block
* Fix params
* Update text
* Update docs
* Update logging
if (log.isDebugEnabled()) only matches if logLevel is debug not
if it is INFO
* Remove log
* Remove arbitrator checks
* Remove arbitrator address
- It works not if not legacy arbitrator is registered.
We cannot remove too much from arbitration as we would risk to break
account signing and display of old arbitration cases.
Though if testing time permits we should try to clean out more of
arbitration domain what is not needed anymore.
* Use account signing state in accounts view (#3365)
* Add account signing icons to signing state in account display
* Remove unnecessary "." that caused layout issues in the past
* Add additional warning in the received payment popup for account signer
* Fix Revolut padding issues for currencies
* Hide signing icon for non-high-risk payment methods
* Add correct icon state and info text for account signing state
* Remove not implemented notification part
* Test self signing witnesses
* Change verified account limit factor to 0.5
* Account Signing: Add information popups for signing state (#3374)
* Add account signing icons to signing state in account display
* Remove not implemented notification part
* Hide time since signing column when not needed
* Remove fiat rounding popup as feature was introduced a long time ago already
* Add information popups for new signed states (only shown once for user) and minor clean-ups
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: sqrrm <sqrrm@users.noreply.github.com>
* Account Signing: Improve signed state notificaton (#3388)
* Remove new badge from Altcoin instant feature
* Remove new badge from percentage user deposit feature
* Fix line break issues in received payment confirmation popup
* Check if received payload fulfills signing state condition and not any personal witness
* Show additional badge for account sections to guide user to check out new signing states
* Fix account signing state in offer book (#3390)
* Account Signing: Fix verified usage (#3392)
* Rename witnessHash -> accountAgeWitnessHash
* Add enum for SignedWitness verification method
* Fix usage of isValidAccountAgeWitness
* Revert icon for signstate change
* Account signing: add signing state to payment account selection (#3403)
* Clean up dead code parts
* Add account signing state to payment account selection
* Account signing: revert dev date setting for trusted accounts (#3404)
* Revert temporary value for dev testing
* Only enable button if there are accounts to be signed
* Add trade limit exceptions (#3406)
* Remove dead code
* Add trade limit exception for accounts signed by arbitrator
* Update translations to adapt to new unified delay (#3409)
* NTP: Fix a couple of UI issues in the New Trade Protocol (#3410)
* Add badge support for refund agent (new arbitrator) tickets
* Fix translation typo
* Clean up arbitrator issues in translation
* Only show refund agent label to support staff
Every user should still see this role as arbitration
* NTP: Improve differentiation between mediation and new arbitration (#3414)
* Clean up property exposure
* Improve differentiation between mediation and arbitration cases
* Go to new refund view if it is no mediation and not open mediation notification if refund is already in progress
* Don't sign filtered accounts
* NTP: merge with master (#3420)
* Temporarily disable onion host for @KanoczTomas's BTC node
* Add Ergo (ERG) without Bouncy Castle dependency.
See #3195.
* List CTSCoin (CTSC)
* Tweak the English name of Japan Bank Transfer payment method
* Add mediator prefix to trade statistics
* List Faircoin (FAIR)
* List uPlexa (UPX)
* Remove not used private methods from BisqEnvironment
* Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- Rename BisqSetupCompleteListener to BisqSetupListener
- Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- make onInitP2pNetwork and onInitWallet default so no impl. required
* Start server at onInitWallet and add wallet password handler
- Add onInitWallet to HttpApiMain and start http server there
- Add onRequestWalletPassword to BisqSetupListener
- Override setupHandlers in HttpApiHeadlessApp and adjust
setRequestWalletPasswordHandler (impl. missing)
- Add onRequestWalletPassword to HttpApiMain
* Add combination (Blockstream.info + Mempool.space) block explorer
* Revert "Temporarily disable onion host for @KanoczTomas's BTC node"
This reverts commit d3335208bb.
* Temporarily disable KanoczTomas btcnode on both onion and clearnet
* Refactor BisqApp - update scene size calculation
* Refactor BisqApp - update error popup message build
* Refactor BisqApp - move icon load into ImageUtil
* Remove unused Utilities
* Increase minimum TX fee to 2 sats/vByte to fix#3106 (#3387)
* Fix mistakes in English source (#3386)
* Fix broken placeholders
* Replace non existing pending trades screen with open trades screen
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update message in failed trade popup
* Refactor BisqEnvironment
* Account Signing: Improve arbitrator signing flow (#3421)
* Pre-select a point of time 2 months in the past
So all arbitrator signed payment accounts will have their limits lifted completely
* Only show payment methods with high chargeback risk to be signed
* Show connected Bitcoin network peer info
* List Ndau (XND)
- Official project URL: https://ndau.io/
- Official block explorer URL: https://explorer.service.ndau.tech
* List Animecoin (ANI)
* Apply rule to not allow BSQ outputs after BTC output for regular txs (#3413)
* Apply rule to not allow BSQ outputs after BTC output for regular txs
* Enforce exactly 1 BSQ output for vote reveal tx
* Fix missing balance and button state update
* Refactor isBtcOutputOfBurnFeeTx method and add comments and TODOs
No functional change.
* Handle asset listing fee in custom method
We need to enforce a BSQ change output
As this is just tx creation code it has no consequences for the hard
fork.
* Use getPreparedBurnFeeTxForAssetListing
* Update comments to not use dust output values
* Fix missing balance and button state update
* Use same method for asset listing fee and proof of burn
Use same method for asset listing fee and proof of burn as tx structure
is same.
Update comments to be more general.
* Use getPreparedProofOfBurnTx
* Require mandatory BSQ change output for proposal fee tx.
We had in the doc stated that we require a mandatory BSQ change output
but it was not enforced in the implementation, causing similar issues
as in Asset listing and proof of burn txs.
* Add fix for not correctly handled issuance tx
* Use new method for issuance tx
// For issuance txs we also require a BSQ change output before the issuance output gets added. There was a
// minor bug with the old version that multiple inputs would have caused an exception in case there was no
// change output (e.g. inputs of 21 and 6 BSQ for BSQ fee of 21 BSQ would have caused that only 1 input was used
// and then caused an error as we enforced a change output. This new version handles such cases correctly.
* Handle all possible blind vote fee transactions
* Move check for invalid opReturn output up
* Add dust check at final sign method
* Fix incorrect comments
* Refactor
- Remove requireChangeOutput param which is always false
- Remove method which is used only by one caller
- Cleanup
* Add comment
* Fix comments, rename methods
* Move code of isBlindVoteBurnedFeeOutput to isBtcOutputOfBurnFeeTx
* Update account signing strings for v1.2 release (#3435)
* Update account signing strings for v1.2 release
* Add minor corrections from ripcurlx review
* Adjust tradeLimitDueAccountAgeRestriction string
So that it describes why an account isn't signed (in general) instead of
why it wasn't signed by an arbitrator.
* Account Signing/NTP: More improvements and fixes (#3436)
* Select the the correct sub view when a dispute is created
* Require capability REFUND_AGENT to receive RefundAgent Messages
* Remove unused return type for account signing
* Add new feature popup for account signing and new trade protocol
* Return void from account signing
* Fix bug with not updating vote result table at vote result block
* NTP: improve backwards compatibility for mediation (#3439)
* Improve readability of offer update
* Add type safeguard for dispute lists
* Set not existing dispute support type for clients < 1.2.0 from message support type
* Enable handling of mediation cases for old trade protocol disputes in 1.2.0 clients
* Remove unnecessary forEach
* Use correct formatter and add missing value for placeholder
* Bump version number
* Add sign all checkbox. Fix list entry display (#3450)
* Add sign all checkbox. Fix list entry display
* Add summary to log and clipboard
* Use safe version for seednodes (#3452)
* Apply shutdown and memory check again
To not risk issues with the release and seed nodes we merge back the
old code base for handling memory check and shutdowns.
The newly added changes for cross connecting between seed nodes cause
out of memory issues and require more work and testing before it can be
used.
* Revert code change for periodic updates between seed nodes.
The periodic updates code caused out of memory issues and require more
work and testing before it can be used.
* Arbitrator republish signedWitnesses on startup (#3448)
* Arbitrator republish signedWitnesses on startup
* Keep republish internal to SignedWitnessService
* Improve new feature popup for ntp and account signing (#3453)
* Do not commit delayedPayoutTx to avoid publishing at restart
Fixes https://github.com/bisq-network/bisq/issues/3463
BitcoinJ publishes automatically committed transactions.
We committed it to the wallet to be able to access it later after a
restart. We stored the txId in Trade and used that to request the tx
from the wallet (as it was committed). Now we store the
bitcoin serialized bytes of the tx and do not commit the tx before
broadcasting it (if a trader opens refund agent ticket).
* [1.2.0] Update client resources (#3456)
* Update bitcoinj checkpoint file
* Update data stores
* Update translations
* [1.2.0] Improve new feature popup (#3465)
* Improve layout of new feature popup
* Extract external hyperlinks into component to make it easier to update
* Comment in necessary showAgain check
* Add Raspberry Pi to build process (#3466)
* Add Raspberry Pi to build process
* Rename deploy variable to improve readability
* Update informational prompt upon creating fiat account with account signing details (#3467)
* Update informational prompt upon creating fiat account with account signing details
* Fix wrong buyer limit for first 30 days
* Set delayedPayoutTxBytes when setting delayedPayoutTx
Fixes https://github.com/bisq-network/bisq/issues/3473
The delayedPayoutTx is not committed to the wallet as long it is not
published. The seller who creates the delayedPayoutTx has not stored the
delayedPayoutTxBytes which caused a nullpointer after restart.
* Minor updates (#3474)
* Remove unnecessary log statement
This seems to be a left over log statement from debugging.
* Use a small delay for MakerSetsLockTime on regtest
When testing on regtest, not in devmode, we want a relatively short
delay to be able to test the delay period.
* Clarify payment limits up to 30 days after signing
* Update RECIPIENT_BTC_ADDRESS for regtest (#3478)
Use an address that is owned by the regtest wallet in the dao-setup.zip
file. This allows for easily verifying BTC trading fees are sent to
this address correctly. Also, it helps verify spending of the time lock
payout.
* Remove btc nodes from Manfred Karrer (#3480)
* Avoid null objects (#3481)
* Avoid null objects
* Remove check for type
Historical data can be arbitration instead of mediation (arbitration
was fallback at last update), so we need to tolerate the incorrect type
here. Is only for tickets from pre 1.2.
* Display appropriate account age info header
Depending on charge back risk type, accounts should show
accountAgeWitness age or time since signing
* Set amount for delayed payout tx to 0 (#3471)
We have shown the spent funds from the deposit tx to the bisq donation
address before. But that was incorrect from the wallet perspective and
would have lead to incorrect summary of all transaction amounts. We set
it now to 0 as we are not spending funds nor receiving any in our wallet.
* Check for result phase at activate method
Fixes https://github.com/bisq-network/bisq/issues/3487
* Only show warning for risky payment menthods (#3497)
* Fix style issues with dark mode (#3495)
* Addresses issues mentioned in https://github.com/bisq-network/bisq/issues/3482#issuecomment-546812730 (#3496)
* Clean up trade statistics from duplicate entries (#3476)
* Clean up trade statistics from duplicate entries
At software updates we added new entries to the extraMap which caused
duplicate entries (if one if the traders was on the new and the other on
the old version or at republishing). We set it now json exclude so avoid
that in future and clean up the map.
* Avoid repeated calls to addPersistableNetworkPayloadFromInitialRequest
For trade stat cleanup we don't want to apply it multiple times as it
is a bit expensive. We get from each seed node the initial data response
and would pollute with the second response our map again and if our node
is a seed node, the seed node itself could not get into a clean state and
would continue pollution other nodes.
* Refactor
Remove not used param
Rename method
Inline method
Cleanups
* Change unsigned to N/A
* [1.2.0] Update data stores and adding SignedWitnessStore (#3494)
* Update data stores and adding SignedWitnessStore
* Update translations
* Update cleaned TradeStatistics2Store and changes in other stores
* VoteResultView update results on any block in result phase
Avoid updating the result more than once per result phase but make
sure it's done if activated during the result phase
* [1.2.0] Format maker fee for BTC and BSQ correctly (#3498)
* Format maker fee for BTC and BSQ correctly
* Update tests
* Only automatically open popup if result wasn't accepted and disable action button when being accepted (#3503)
* Fix tradestatistics (#3469)
* Remove delayed re-publishing of tradeStatistics
This was done earlier when only maker was publishing trade statistics.
Now both traders do it so we get already higher resilience.
* Remove unused method
Forgot in prev. commit to remove also the method.
* Remove support for TradeStatistics2.ARBITRATOR_ADDRESS
* Add comment and set ARBITRATOR_ADDRESS deprecated
* Remove setting of arbitrator data from makers side
The 2 arbitrator related fields in Trade are only set by the maker and
not used anymore for reading, so it can be removed. The whole arbitrator
domain should be cleaned out some day, but because of backward
compatibility issues it id difficult to do it entirely at release date.
With release after v 1.2. when no old offers are out anymore we are
able to clean up that domain.
* Remove dev log
* Update translations
* [1.2.0] Improve dispute section (#3504)
* Improve wording for mediation summary and add specific next steps for refund agent case
* Select the first dispute case when entering the support section
* Revert to SNAPSHOT version
* Fix but with initialRequestApplied (#3512)
* Fix resource name (#3514)
* Remove minor version number in news popup
* Fix copy SignedWitnessStore db script
* Not show payment account details for blocked offers
* Use age of accountAgeWitness as basis for sell limits
* Bump version number
* Revert to SNAPSHOT version
* Merge v1.2.0/v1.2.1 with master (#3521)
* List Krypton (ZOD)
* Temporarily disable onion host for @KanoczTomas's BTC node
* Add Ergo (ERG) without Bouncy Castle dependency.
See #3195.
* List CTSCoin (CTSC)
* Tweak the English name of Japan Bank Transfer payment method
* List Animecoin (ANI)
* Add mediator prefix to trade statistics
* List Faircoin (FAIR)
* List uPlexa (UPX)
* Remove not used private methods from BisqEnvironment
* Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- Rename BisqSetupCompleteListener to BisqSetupListener
- Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- make onInitP2pNetwork and onInitWallet default so no impl. required
* Start server at onInitWallet and add wallet password handler
- Add onInitWallet to HttpApiMain and start http server there
- Add onRequestWalletPassword to BisqSetupListener
- Override setupHandlers in HttpApiHeadlessApp and adjust
setRequestWalletPasswordHandler (impl. missing)
- Add onRequestWalletPassword to HttpApiMain
* Add combination (Blockstream.info + Mempool.space) block explorer
* Revert "Temporarily disable onion host for @KanoczTomas's BTC node"
This reverts commit d3335208bb.
* Temporarily disable KanoczTomas btcnode on both onion and clearnet
* Refactor BisqApp - update scene size calculation
* Refactor BisqApp - update error popup message build
* Refactor BisqApp - move icon load into ImageUtil
* Remove unused Utilities
* Increase minimum TX fee to 2 sats/vByte to fix#3106 (#3387)
* Fix mistakes in English source (#3386)
* Fix broken placeholders
* Replace non existing pending trades screen with open trades screen
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update message in failed trade popup
* Refactor BisqEnvironment
* List Ndau (XND)
- Official project URL: https://ndau.io/
- Official block explorer URL: https://explorer.service.ndau.tech
* Show connected Bitcoin network peer info
* Not show payment account details for blocked offers (#3425)
* Add GitHub issue template for user reported bugs (#3454)
* Add issue template with steps to reproduce and actual/expected behavior
* Fix typo in .github/ISSUE_TEMPLATE.md
* Fix wrong auto merge
* Add CapabilityRequiringPayload to TradeStatistics2
With v1.2.0 we changed the way how the hash is created.
To not create too heavy load for seed nodes from
requests from old nodes we use the SIGNED_ACCOUNT_AGE_WITNESS
capability to send trade statistics only to new nodes.
As trade statistics are only used for informational purpose it will
not have any critical issue for the old nodes beside that they don't see the latest trades.
* Fix tradestat hash issue (#3529)
* Recreate hash from protobuf data
To ensure all data are using the new hash method (excluding extraMap) we
do not use the hash field from the protobug data but pass null which
causes to create the hash new based on the new hash method.
* Add filter.toString method and log filter in case of wrong signature
We have atm a invalid filter (prob. some dev polluted a test filter to mainnet)
* Change log level, add log
* Refactor: Move code to dump method
* Add TRADE_STATISTICS_HASH_UPDATE capability
We changed the hash method in 1.2.0 and that requires update to 1.2.2
for handling it correctly, otherwise the seed nodes have to process too
much data.
* Add logs for size of data exchange messages
* Add more data in log
* Improve logs
* Fix wrong msg in log, cahnge log level
* Add check for depositTxId not empty
* Remove check for duplicates
As we recreate the hash for all trade stat objects we don't need that
check anymore.
* Add logs
* Temporarily remove this part of the statistics
It prevents merging with master because through auto merge a duplication of this part of the code is happening and prevents Travis from succeeding
- Add onInitWallet to HttpApiMain and start http server there
- Add onRequestWalletPassword to BisqSetupListener
- Override setupHandlers in HttpApiHeadlessApp and adjust
setRequestWalletPasswordHandler (impl. missing)
- Add onRequestWalletPassword to HttpApiMain
- Rename BisqSetupCompleteListener to BisqSetupListener
- Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- make onInitP2pNetwork and onInitWallet default so no impl. required
