2004-11-07 23:36:43 +01:00
.TH TOR 1 "November 2004" "TOR"
2003-11-20 21:56:52 +01:00
.SH NAME
tor \- The second-generation onion router
.SH SYNOPSIS
.B tor
[\fI OPTION value\fR ]...
.SH DESCRIPTION
.I tor
is a connection-oriented anonymizing communication
service. Users choose a source-routed path through a set of nodes, and
negotiate a "virtual circuit" through the network, in which each node
knows its predecessor and successor, but no others. Traffic flowing down
the circuit is unwrapped by a symmetric key at each node, which reveals
the downstream node.
.PP
Basically \fI tor\fR provides a distributed network of servers ("onion
2004-11-10 02:16:50 +01:00
routers"). Users bounce their TCP streams -- web traffic, ftp, ssh, etc --
2003-11-20 21:56:52 +01:00
around the routers, and recipients, observers, and even the routers
themselves have difficulty tracking the source of the stream.
.SH OPTIONS
\fB -h, -help\fP
Display a short help message and exit.
.TP
\fB -f \fR \fI FILE\fP
FILE contains further "option value" pairs. (Default: @CONFDIR@/torrc)
.TP
2004-11-10 02:16:50 +01:00
Other options can be specified either on the command-line (\fI --option
2004-10-27 05:07:53 +02:00
value\fR ), or in the configuration file (\fI option value\fR ).
Options are case-insensitive.
2003-12-03 11:44:11 +01:00
.TP
2004-11-07 23:36:43 +01:00
\fB Log \fR \fI minSeverity\fR [-\fI maxSeverity\fR ] \fB stderr\fR |\fB stdout\fR |\fB syslog\fR \fP
2004-11-05 22:22:38 +01:00
Send all messages between \fI minSeverity\fR and \fI maxSeverity\fR to
2004-11-07 23:36:43 +01:00
the standard output stream, the standard error stream, or to the system
2004-11-05 22:22:38 +01:00
log. (The "syslog" value is only supported on Unix.) Recognized
severity levels are debug, info, notice, warn, and err. If only one
severity level is given, all messages of that level or higher will be
sent to the listed destination.
2003-11-20 21:56:52 +01:00
.TP
2004-11-05 22:22:38 +01:00
\fB Log \fR \fI minSeverity\fR -\fI maxSeverity\fR \fB file\fR \fI FILENAME\fP
As above, but send log messages to the listed filename. The "Log"
option may appear more than once in a configuration file. Messages
2004-11-07 23:36:43 +01:00
are sent to all the logs that match their severity level.
2004-10-26 23:48:41 +02:00
.TP
2004-11-22 22:58:55 +01:00
\fB BandwidthRate \fR \fI N\fR \fB bytes\fR |\fB KB\fR |\fB MB\fR |\fB GB\fR |\fB TB\fP
A token bucket limits the average incoming bandwidth on this node to
the specified number of bytes second. (Default: 780 KB)
2004-01-11 00:42:24 +01:00
.TP
2004-11-22 22:58:55 +01:00
\fB BandwidthBurst \fR \fI N\fR \fB bytes\fR |\fB KB\fR |\fB MB\fR |\fB GB\fR |\fB TB\fP
Limit the maximum token bucket size (also known as the burst) to the given number of bytes. (Default: 48 MB)
2004-01-11 00:42:24 +01:00
.TP
2004-11-12 04:29:03 +01:00
\fB DataDirectory \fR \fI DIR\fP
Store working data in DIR (Default: @LOCALSTATEDIR@/lib/tor)
.TP
2004-10-27 05:07:53 +02:00
\fB DirServer \fR \fI address:port fingerprint\fP
2004-10-17 05:33:51 +02:00
Use a nonstandard authoritative directory server at the provided
address and port, with the specified key fingerprint. This option can
be repeated many times, for multiple authoritative directory
servers. If no \fB dirserver\fP line is given, Tor will use the default
directory servers: moria1, moria2, and tor26.
.TP
2004-10-27 05:07:53 +02:00
\fB Group \fR \fI GID\fP
2003-11-20 21:56:52 +01:00
On startup, setgid to this user.
.TP
2004-11-07 23:36:43 +01:00
\fB HttpProxy\fR \fI host\fR [:\fI port\fR ]\fP
If set, Tor will make all its directory requests through this host:port,
rather than connecting directly to any directory servers.
.TP
2004-10-27 05:07:53 +02:00
\fB KeepalivePeriod \fR \fI NUM\fP
2004-11-07 23:36:43 +01:00
To keep firewalls from expiring connections, send a padding keepalive
cell on open connections every NUM seconds. (Default: 300)
2003-11-20 21:56:52 +01:00
.TP
2004-10-27 05:07:53 +02:00
\fB MaxConn \fR \fI NUM\fP
2004-11-07 23:36:43 +01:00
Maximum number of simultaneous sockets allowed. You probably don't need
to adjust this. (Default: 1024)
2004-09-08 08:46:33 +02:00
.TP
2004-11-07 23:36:43 +01:00
\fB OutboundBindAddress \fR \fI IP\fP
2004-09-03 01:41:06 +02:00
Make all outbound connections originate from the IP address specified. This
is only useful when you have multiple network interfaces, and you want all
of Tor's outgoing connections to use a single one.
.TP
2004-10-27 05:07:53 +02:00
\fB PIDFile \fR \fI FILE\fP
2003-11-20 21:56:52 +01:00
On startup, write our PID to FILE. On clean shutdown, remove FILE.
.TP
2004-11-07 23:36:43 +01:00
\fB RunAsDaemon \fR \fB 0\fR |\fB 1\fR \fP
2003-11-20 21:56:52 +01:00
If 1, Tor forks and daemonizes to the background. (Default: 0)
.TP
2004-10-27 05:07:53 +02:00
\fB User \fR \fI UID\fP
2003-11-20 21:56:52 +01:00
On startup, setuid to this user.
2004-11-13 18:17:04 +01:00
.TP
\fB ControlPort \fR \fI Port\fP
If set, Tor will accept connections from the same machine (localhost only) on
this port, and allow those connections to control the Tor process using the
Tor Control Protocol (described in control-spec.txt). Note: unless you also
specify one of \fB HashedControlPassword\fP or \fB CookieAuthentication\fP ,
setting this option will cause Tor to allow any process on the local host to
control it.
.TP
\fB HashedControlPassword \fR \fI hashed_password\fP
Don't allow any connections on the control port except when the other process
knows the password whose one-way hash is \fI hashed_password\fP . You can
compute the hash of a password by running "tor --hash-password
\fI password\fP ".
.TP
\fB CookieAuthentication \fR \fB 0\fR |\fB 1\fP
If this option is set to 1, don't allow any connections on the control port
except when the connecting process knows the contents of a file named
"control_auth_cookie", which Tor will create in its data directory. This
authentication methods should only be used on systems with good filesystem
security.
2004-11-22 22:58:55 +01:00
\fB DirFetchPeriod \fR \fI N\fR \fB seconds\fR |\fB minutes\fR |\fB hours\fR |\fB days\fR |\fB weeks\fP
Every time the specified period elapses, Tor downloads a directory.
A directory contains a signed list of all known servers as well as
their current their liveness status. (Default: 1 hour)
.TP
\fB StatusFetchPeriod \fR \fI N\fR \fB seconds\fR |\fB minutes\fR |\fB hours\fR |\fB days\fR |\fB weeks\fP
Every time the specified period elapses, Tor downloads signed status
information about the current state of known servers. (Default: 20 minutes.)
.TP
\fB RendPostPeriod \fR \fI N\fR \fB seconds\fR |\fB minutes\fR |\fB hours\fR |\fB days\fR |\fB weeks\fP
Every time the specified period elapses, Tor uploads any rendezvous
service descriptors to the directory servers. This information is also
uploaded whenever it changes. (Default: 10 minutes.)
2003-11-20 21:56:52 +01:00
.SH CLIENT OPTIONS
.PP
2004-10-27 05:07:53 +02:00
The following options are useful only for clients (that is, if \fB SOCKSPort\fP is non-zero):
2003-11-20 21:56:52 +01:00
.TP
2004-11-07 23:36:43 +01:00
\fB AllowUnverifiedNodes\fR \fB entry\fR |\fB exit\fR |\fB middle\fR |\fB introduction\fR |\fB rendezvous\fR |...\fP
2004-09-10 01:52:15 +02:00
Where on our circuits should we allow Tor servers that the directory
servers haven't authenticated as "verified"? (Default: middle,rendezvous.)
2004-11-10 01:19:04 +01:00
.TP
2004-11-07 23:36:43 +01:00
\fB ClientOnly \fR \fB 0\fR |\fB 1\fR \fP
2004-09-10 02:15:59 +02:00
If set to 1, Tor will under no circumstances run as a server. (Usually,
you don't need to set this; Tor is pretty smart at figuring out whether
2004-11-07 23:36:43 +01:00
you are reliable and high-bandwidth enough to be a good server.)
2004-09-10 02:15:59 +02:00
.TP
2004-11-22 22:58:55 +01:00
\fB EntryNodes \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-01-12 07:06:47 +01:00
A list of preferred nodes to use for the first hop in the circuit, if possible.
.TP
2004-11-22 22:58:55 +01:00
\fB ExitNodes \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-01-12 07:06:47 +01:00
A list of preferred nodes to use for the last hop in the circuit, if possible.
.TP
2004-11-22 22:58:55 +01:00
\fB ExcludeNodes \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-02-28 06:11:10 +01:00
A list of nodes to never use when building a circuit.
.TP
2004-11-07 23:36:43 +01:00
\fB StrictExitNodes \fR \fB 0\fR |\fB 1\fR \fP
2004-08-15 22:14:44 +02:00
If 1, Tor will never use any nodes besides those listed in "exitnodes" for
the last hop of a circuit.
.TP
2004-11-07 23:36:43 +01:00
\fB StrictEntryNodes \fR \fB 0\fR |\fB 1\fR \fP
2004-08-15 22:14:44 +02:00
If 1, Tor will never use any nodes besides those listed in "entrynodes" for
the first hop of a circuit.
.TP
2004-11-07 23:36:43 +01:00
\fB FascistFirewall \fR \fB 0\fR |\fB 1\fR \fP
2004-09-08 08:46:33 +02:00
If 1, Tor will only create outgoing connections to ORs running on ports that
2004-11-07 23:36:43 +01:00
your firewall allows (defaults to 80 and 443; see \fB FirewallPorts\fR ). This will
2004-09-08 08:46:33 +02:00
allow you to run Tor as a client behind a firewall with restrictive policies,
2004-09-10 20:56:52 +02:00
but will not allow you to run as a server behind such a firewall.
2004-09-08 08:46:33 +02:00
.TP
2004-10-27 05:07:53 +02:00
\fB FirewallPorts \fR \fI PORTS\fP
2004-09-08 08:46:33 +02:00
A list of ports that your firewall allows you to connect to. Only used when
2004-11-07 23:36:43 +01:00
\fB FascistFirewall\fR is set. (Default: 80, 443.)
2004-09-08 08:46:33 +02:00
.TP
2004-10-27 05:07:53 +02:00
\fB
\fB NewCircuitPeriod \fR \fI NUM\fP
2003-11-20 21:56:52 +01:00
Every NUM seconds consider whether to build a new circuit. (Default: 60)
.TP
2004-11-22 22:58:55 +01:00
\fB NodeFamily \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-11-10 02:16:50 +01:00
The named Tor servers constitute a "family" of similar or co-administered
2004-11-10 01:36:58 +01:00
servers, so never use any two of them in the same circuit. Defining a
NodeFamily is only needed when a server doesn't list the family itself
(with MyFamily). This option can be used multiple times.
2004-10-17 05:33:51 +02:00
.TP
2004-10-27 05:07:53 +02:00
. \" \fBPathlenCoinWeight \fR\fI0.0-1.0\fP
. \" Paths are 3 hops plus a geometric distribution centered around this coinweight. Must be >=0.0 and <1.0. (Default: 0.3) NOT USED CURRENTLY
. \" .TP
2004-11-22 22:58:55 +01:00
\fB RendNodes \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-09-03 01:41:06 +02:00
A list of preferred nodes to use for the rendezvous point, if possible.
.TP
2004-11-22 22:58:55 +01:00
\fB RendExcludeNodes \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-09-03 01:41:06 +02:00
A list of nodes to never use when choosing a rendezvous point.
.TP
2004-10-27 05:07:53 +02:00
\fB SOCKSPort \fR \fI PORT\fP
2004-09-10 20:54:21 +02:00
Bind to this port to listen for connections from SOCKS-speaking applications.
Set this to 0 if you don't want to allow application connections. (Default:
9050)
2003-11-20 21:56:52 +01:00
.TP
2004-10-27 05:07:53 +02:00
\fB SOCKSBindAddress \fR \fI IP\fP
2004-06-07 21:09:05 +02:00
Bind to this address to listen for connections from socks-speaking applications. (Default: 127.0.0.1) You can also specify a port (e.g. 192.168.0.1:9100). This directive can be specified multiple times to bind to multiple addresses/ports.
.TP
2004-11-22 22:58:55 +01:00
\fB SOCKSPolicy \fR \fI policy\fR ,\fI policy\fR ,\fI ...\fP
2004-08-07 10:30:16 +02:00
Set an entrance policy for this server, to limit who can connect to the socks ports. The policies have the same form as exit policies below.
2003-11-20 21:56:52 +01:00
.SH SERVER OPTIONS
.PP
2004-10-27 05:07:53 +02:00
The following options are useful only for servers (that is, if \fB ORPort\fP is non-zero):
2003-11-20 21:56:52 +01:00
.TP
2004-10-27 05:07:53 +02:00
\fB Address \fR \fI address\fP
2004-11-12 04:30:11 +01:00
The IP or fqdn of this server (e.g. moria.mit.edu). You can leave this
unset, and Tor will guess your IP.
2003-11-20 21:56:52 +01:00
.TP
2004-11-22 22:58:55 +01:00
\fB ContactInfo \fR \fI email_address\fP
2004-11-12 04:29:03 +01:00
Administrative contact information for server.
2003-11-20 21:56:52 +01:00
.TP
2004-11-22 22:58:55 +01:00
\fB ExitPolicy \fR \fI policy\fR ,\fI policy\fR ,\fI ...\fP
2004-04-06 03:00:26 +02:00
Set an exit policy for this server. Each policy is of the form
"\fB reject\fP \fI ADDR\fP \fB /\fP \fI MASK\fP \fB :\fP \fI PORT\fP ".
2004-06-07 21:09:05 +02:00
If \fB /\fP \fI MASK\fP is omitted then this policy just applies to the host
2004-04-06 03:00:26 +02:00
given. Instead of giving a host or network you can also use "\fB *\fP " to
denote the universe (0.0.0.0/0). \fI PORT\fP can either be a single port number
or an interval of ports: "\fI FROM_PORT\fP \fB -\fP \fI TO_PORT\fP ".
For example, "reject 127.0.0.1:*,reject 192.168.1.0/24:*,accept *:*" would
reject any traffic destined for localhost and any 192.168.1.* address, but
accept anything else.
2004-06-07 21:09:05 +02:00
2004-06-23 03:49:10 +02:00
This directive can be specified multiple times so you don't have to put
it all on one line.
See RFC 3330 for more details about internal and reserved IP address
space. The default exit policy is:
.PD 0
.RS 12
.IP "reject 0.0.0.0/8" 0
.IP "reject 169.254.0.0/16" 4
.IP "reject 127.0.0.0/8"
.IP "reject 192.168.0.0/16"
.IP "reject 10.0.0.0/8"
.IP "reject 172.16.0.0/12"
.IP "accept *:20-22"
.IP "accept *:53"
.IP "accept *:79-81"
.IP "accept *:110"
.IP "accept *:143"
.IP "accept *:443"
.IP "accept *:873"
.IP "accept *:993"
.IP "accept *:995" 4
2004-08-08 07:33:15 +02:00
.IP "reject *:4661-4662"
.IP "reject *:1214"
.IP "reject *:6346"
2004-06-23 03:49:10 +02:00
.IP "accept *:1024-65535"
.IP "reject *:*"
.RE
.PD
2003-11-20 21:56:52 +01:00
.TP
2004-10-27 05:07:53 +02:00
\fB MaxOnionsPending \fR \fI NUM\fP
2003-11-20 21:56:52 +01:00
If you have more than this number of onionskins queued for decrypt, reject new ones. (Default: 100)
.TP
2004-11-22 22:58:55 +01:00
\fB MyFamily \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-10-17 05:33:51 +02:00
Declare that this Tor server is controlled or administered by a group
2004-11-10 02:20:17 +01:00
or organization identical or similar to that of the other named servers.
2004-10-17 05:33:51 +02:00
When two servers both declare that they are in the same 'family', Tor clients
2004-11-13 18:17:04 +01:00
will not use them in the same circuit. (Each server only need to list the
other servers in its family; it doesn't need to list itself.)
2004-10-17 05:33:51 +02:00
.TP
2004-10-27 05:07:53 +02:00
\fB Nickname \fR \fI name\fP
2003-11-20 21:56:52 +01:00
Set the server's nickname to 'name'.
.TP
2004-10-27 05:07:53 +02:00
\fB NumCPUs \fR \fI num\fP
2003-11-20 21:56:52 +01:00
How many processes to use at once for decrypting onionskins. (Default: 1)
.TP
2004-10-27 05:07:53 +02:00
\fB ORPort \fR \fI PORT\fP
2003-11-20 21:56:52 +01:00
Bind to this port to listen for connections from Tor clients and servers.
.TP
2004-10-27 05:07:53 +02:00
\fB ORBindAddress \fR \fI IP\fP
2003-11-20 21:56:52 +01:00
Bind to this address to listen for connections from Tor clients and servers. (Default: 0.0.0.0)
2004-10-17 05:33:51 +02:00
.TP
2004-10-27 05:07:53 +02:00
\fB RedirectExit \fR \fI pattern target\fP
2004-10-17 05:33:51 +02:00
Whenever an outgoing connection tries to connect to one of a given set
2004-10-19 19:46:06 +02:00
of addresses, connect to \fI target\fP (an \fI address:port\fP pair) instead.
The address
2004-10-17 05:33:51 +02:00
pattern is given in the same format as for an exit policy. The
address translation applies after exit policies are applied. Multiple
2004-10-27 05:07:53 +02:00
\fB RedirectExit\fP options can be used: once any one has matched
2004-10-19 19:46:06 +02:00
successfully, no subsequent rules are considered. You can specify that no
redirection is to be performed on a given set of addresses by using the
special target string "pass", which prevents subsequent rules from being
considered.
2004-11-09 06:18:15 +01:00
.TP
2004-11-22 22:58:55 +01:00
\fB DirPostPeriod \fR \fI N\fR \fB seconds\fR |\fB minutes\fR |\fB hours\fR |\fB days\fR |\fB weeks\fP
Every time the specified period elapses, Tor uploads its server
descriptors to the directory servers. This information is also
uploaded whenever it changes. (Default: 10 minutes.)
.TP
\fB AccountingMax \fR \fI N\fR \fB bytes\fR |\fB KB\fR |\fB MB\fR |\fB GB\fR |\fB TB\fP
Never send more than the specified number of bytes in a given
accounting period,or receive more than that number in the period.
When the number of bytes is exhausted, Tor will hibernate until some
time in the next accounting period. To prevent all servers from
waking at the same time, Tor will also wait until a random point in
each period before waking up. If you have bandwidth cost issues,
2004-11-09 06:18:15 +01:00
using this option is preferable to setting a low bandwidth, since it
provides users with a collection of fast servers that are up some of
the time, which is more useful than a set of slow servers that are
always "available".
.TP
2004-11-22 22:58:55 +01:00
\fB AccountingStart \fR \fB day\fR |\fB week\fR |\fB month\fR [\fI day\fR ] \fI HH:MM\fR \fP
Specify how long accounting periods last. If \fB month\fP is given,
each accounting period runs from the time \fI HH:MM\fR on the
\fI day\fR th day of one month to the same day and time of the next.
(The day must be between 1 and 28.) If \fB week\fP is given, each
accounting period runs from the time \fI HH:MM\fR of the \fI day\fR th
day of one week to the same day and time of the next week, with Monday
as day 1 and Sunday as day 7. If \fB day\fR is given, each accounting
period runs from the time \fI HH:MM\fR each day to the same time on the
next day. All times are local. (Defaults to "month 1 0:00".)
2003-11-20 21:56:52 +01:00
.SH DIRECTORY SERVER OPTIONS
.PP
2004-10-27 05:07:53 +02:00
The following options are useful only for directory servers (that is, if \fB DirPort\fP is non-zero):
2003-11-20 21:56:52 +01:00
.TP
2004-11-07 23:36:43 +01:00
\fB AuthoritativeDirectory \fR \fB 0\fR |\fB 1\fR \fP
2004-09-10 01:52:15 +02:00
When this option is set to 1, Tor operates as an authoritative
directory server. Instead of caching the directory, it generates its
own list of good servers, signs it, and sends that to the clients.
Unless the clients already have you listed as a trusted directory, you
probably do not want to set this option. Please coordinate with the other
admins at tor-ops@freehaven.net if you think you should be a directory.
.TP
2004-10-27 05:07:53 +02:00
\fB DirPort \fR \fI PORT\fP
2003-11-20 21:56:52 +01:00
Bind the directory service to this port.
.TP
2004-10-27 05:07:53 +02:00
\fB DirBindAddress \fR \fI IP\fP
2003-11-20 21:56:52 +01:00
Bind the directory service to this address. (Default: 0.0.0.0)
.TP
2004-11-22 22:58:55 +01:00
\fB DirPolicy \fR \fI policy\fR ,\fI policy\fR ,\fI ...\fP
2004-10-27 08:29:11 +02:00
Set an entrance policy for this server, to limit who can connect to the directory ports. The policies have the same form as exit policies above.
.TP
2004-10-27 05:07:53 +02:00
\fB RecommendedVersions \fR \fI STRING\fP
2004-10-17 05:33:51 +02:00
STRING is a command-separated list of Tor versions currently believed
to be safe. The list is included in each directory, and nodes which
pull down the directory learn whether they need to upgrade. This
option can appear multiple times: the values from multiple lines are
spliced together.
2004-09-10 01:52:15 +02:00
.TP
2004-11-07 23:36:43 +01:00
\fB RunTesting \fR \fB 0\fR |\fB 1\fR \fP
2004-09-10 02:15:59 +02:00
If set to 1, Tor tries to build circuits through all of the servers it
2004-09-10 01:52:15 +02:00
knows about, so it can tell which are up and which are down. This
option is only useful for authoritative directories, so you probably
don't want to use it.
2004-10-27 05:07:53 +02:00
.SH HIDDEN SERVICE OPTIONS
2004-04-01 02:36:46 +02:00
.PP
The following options are used to configure a hidden service.
.TP
2004-10-27 05:07:53 +02:00
\fB HiddenServiceDir \fR \fI DIRECTORY\fP
2004-04-01 02:36:46 +02:00
Store data files for a hidden service in DIRECTORY. Every hidden
service must have a separate directory. You may use this option multiple
times to specify multiple services.
.TP
2004-10-27 05:07:53 +02:00
\fB HiddenServicePort \fR \fI VIRTPORT \fR [\fI TARGET\fR ]\fP
2004-04-01 02:36:46 +02:00
Configure a virtual port VIRTPORT for a hidden service. You may use this
option multiple times; each time applies to the service using the most recent
hiddenservicedir. By default, this option maps the virtual port to the
same port on 127.0.0.1. You may override the target port, address, or both
by specifying a target of addr, port, or addr:port.
2004-04-08 08:30:15 +02:00
.TP
2004-11-22 22:58:55 +01:00
\fB HiddenServiceNodes \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-04-08 08:30:15 +02:00
If possible, use the specified nodes as introduction points for the hidden
service.
.TP
2004-11-22 22:58:55 +01:00
\fB HiddenServiceExcludeNodes \fR \fI nickname\fR ,\fI nickname\fR ,\fI ...\fP
2004-04-08 08:30:15 +02:00
Do not use the specified nodes as introduction points for the hidden
service.
2004-04-01 02:36:46 +02:00
2004-09-03 01:41:06 +02:00
. \" UNDOCUMENTED
. \" ignoreversion
2004-09-10 01:52:15 +02:00
2004-11-16 03:19:55 +01:00
.SH SIGNALS
Tor catches the following signals:
.TP
\fB SIGTERM\fR
Tor will catch this, clean up and sync to disk if necessary, and exit.
.TP
\fB SIGINT\fR
Tor clients behave as with SIGTERM; but Tor servers will do a controlled
slow shutdown, closing listeners and waiting 30 seconds before exiting.
.TP
\fB SIGHUP\fR
The signal instructs Tor to reload its configuration, fetch a new
directory, and kill and restart its helper processes if applicable.
.TP
\fB SIGUSR1\fR
Log statistics about current connections, past connections, and
throughput.
.TP
2004-11-20 08:35:20 +01:00
\fB SIGUSR2\fR
Switch all logs to loglevel debug. You can go back to the old loglevels
by sending a SIGHUP.
.TP
2004-11-16 03:19:55 +01:00
\fB SIGCHLD\fR
Tor receives this signal when one of its helper processes has exited,
so it can clean up.
.TP
\fB SIGPIPE\fR
Tor catches this signal and ignores it.
.TP
\fB SIGXFSZ\fR
If this signal exists on your platform, Tor catches and ignores it.
2003-11-20 21:56:52 +01:00
.SH FILES
.TP
.I @CONFDIR@/torrc
The configuration file, which contains "option value" pairs.
.TP
.I @CONFDIR@/dirservers
A list of directory servers, to bootstrap into the network.
.TP
.I @LOCALSTATEDIR@/lib/tor/
2004-08-07 10:30:16 +02:00
The tor process stores keys and other data here.
2003-11-20 21:56:52 +01:00
.SH SEE ALSO
.BR privoxy (1),
2004-11-07 23:36:43 +01:00
.BR tsocks (1),
.BR torify (1)
2003-11-20 21:56:52 +01:00
.BR http://freehaven.net/tor/
.SH BUGS
Plenty, probably. It's still in alpha. Please report them.
.SH AUTHORS
2004-08-07 10:30:16 +02:00
Roger Dingledine <arma@mit.edu>, Nick Mathewson <nickm@alum.mit.edu>.