For making debugging easy.
If the user gives a different node_secret for transport
layer (`PeerManager`) and for routing msg, internal_announcement_signatures
is the first place it causes an error.
By giving a detailed error message, user will be able to
fix the bug quickly.
... for ChannelError and APIMisuseError
Before this commit, When rl returns error, we don't know
The actual parameter which caused the error.
By returning parameterised `String` instead of predefined `&'static str`,
We can give a caller improved error message.
TestLogger now has two additional methods
1. `assert_log_contains` which checks the logged messsage
has how many entry which includes the specified string as a substring.
2. `aasert_log_regex` mostly the same with `assert_log_contains`
but it is more flexible that caller specifies regex which has
to be satisfied instead of just a substring.
For regex, tests now includes `regex` as dev-dependency.
We use them largely as indexes into a Vec<Transaction> so there's
little reason for them to be u32s. Instead, use them as usize
everywhere.
We also take this opportunity to add range checks before
short_channel_id calculation, as we could otherwise end up with a
bogus short_channel_id due to an output index out of range.
... instead of only the txid.
This is another instance of it not being possible to fully
re-implement SimpleManyChannelMonitor using only public methods. In
this case you couldn't properly register outpoints for monitoring
so that the funding transaction would be matched.
When we were sending an open_channel messages we were asking the
feerate estimator for a new value instead of using the one we had.
If the feerate estimator gave a different value than the one it did
when we created the Channel struct, we'd start out-of-sync with our
counterparty and blow up on funding_signed. Even worse, the
ConfirmationTarget used was different, so its highly likely they
would disagree.
Also remove newly unused fee estimator parameter from get_open-channel
API.
Co-authored-by: Matt Corallo <git@bluematt.me>
Co-authored-by: Valentine Wallace <vwallace@protonmail.com>
This also includes adding a closure that creates a new pending HTLC status
as a parameter for Channel's update_add_htlc. This will later be useful
when we add the check for fee spike buffer violations, which will also result
in changing an HTLC's pending status to failing.
Co-authored-by: Jeffrey Czyz <jkczyz@gmail.com>
Co-authored-by: Valentine Wallace <vwallace@protonmail.com>
Instead of using a raw generic type, an associted type allows us
to have explicit docs on the type, which is nice. More importantly,
however, our automated bindings generator knows how to read
associated types but not raw generics.
Also, our bindings generator expects things which are referenced to
have already been defined, so we move ManyChannelMonitor below the
ChannelMonitor definition.
This caused a bunch of cascading changes, including
passing loggers down to Channels in function calls
rather than having each Channel have a pointer to the
ChannelManager's Logger (which was a circular reference).
Other structs that the Channel had passed its Logger to also
had their loggers removed. Other newly unused Loggers were
also removed, especially when keeping them would've caused
a bunch of extra test changes to be necessary, e.g. with
the ChainWatchInterfaceUtil's Logger.
This simplifies channelmonitor quite nicely (as expected) as we
never have to be concerned with learning data in a DataLossProtect
which is require for us to claim our funds from the latest remote
commitment transaction.
Features for a given context are duplicated throughout the features
module. Use a macro for defining a Context and the applicable features
such that features only need to be defined for a Context in one place.
The Context provides bitmasks for selecting known and unknown feature
flags.
BOLT 1 and BOLT 9 refer to features as "known" if a peer understands
them. They also use the term "supported" to mean either optional or
required.
Update the features module to use similar terminology.
- Define contexts in terms of required and optional features rather than
just supported features
- Define known features as those that are optional or required
- Rename supported() constructor to known()
For completeness, clear_optional_bit for each feature is now called
clear_bits and clears both optional and required bits.
We want to avoid a third-party channel closure, where a random node
by sending us a payment expiring at current height, would trigger our
onchain logic to close the channel due to a near-expiration.
This is a key test for our automatic HTLC time-out logic, as it
ensures we don't allow an HTLC which indicates we should wait for
additional HTLCs before responding to cause us to force-close a
channel due to HTLC near-timeout.
We only do this for incoming HTLCs directly as we rely on channel
closure and HTLC-Timeout broadcast to fail any HTLCs which we
relayed onwards where our next-hop doesn't update_fail in time.
Previously, we created the initial ChannelMonitor on outbound
channels when we generated the funding_created message. This was
somewhat unnecessary as, at that time, we hadn't yet received
clearance to broadcast our initial funding transaction, and thus
there should never be any use for a ChannelMonitor. It also
complicated ChannelMonitor a bit as, at this point, we didn't have
an initial local commitment transaction.
By moving the creation of the initial ChannelMonitor to when we
receive our counterparty's funding_signed, we can ensure that any
ChannelMonitor will always have both a latest remote commitment tx
and a latest local commitment tx for broadcast.
This also fixes a strange API where we would close a channel
unceremoniously on peer-disconnection if we hadn't yet received the
funding_signed, but we'd already have a ChannelMonitor for that
channel. While it isn't strictly a bug (some potential DoS issues
aside), it is strange that these two definitions of a channel being
open were not in sync.
`incorrect_or_unknown_payment_details` failure message,
`0x4000 (PERM) | 15`, should include the following data:
- [u64:htlc_msat]
- [u32:height]
This patches ensure that the height is included in all
the occurrences of this failure message.
After we moved the ChannelMonitor creation later during Channel
init, we never went back and cleaned up ChannelMonitor to remove
a number of now-useless Option<>s, so we do that now.
ChannelManager::send_payment stopped utilizing its ownership of the
Route with MPP (which, for readability, now clone()s the individual
paths when creating HTLCSource::OutboundRoute objects). While this
isn't ideal, it likely also makes sense to ensure that the user has
access to the Route after sending to correlate individual path
failures with the paths in the route or, in the future, retry
individual paths.
Thus, the easiest solution is to just take the Route by reference,
allowing the user to retain ownership.
This rather dramatically changes the return type of send_payment
making it much clearer when resending is safe and allowing us to
return a list of Results since different paths may have different
return values.
Previously if we claimed an MPP where a previous-hop channel was
closed while we were waitng for the user to provide us the preimage
we'd simply skip claiming that HTLC without letting the user know.
This refactors the claim logic to first check that all the channels
are still available (which is actually all we need - we really
mostly care about updating the channel monitors, not the channels
themselves) and then claim the HTLCs in the same lock, ensuring
atomicity.
Base AMP is centered around the concept of a 'payment_secret` - an
opaque 32-byte random string which is used to authenticate the
sender to the recipient as well as tie the various HTLCs which
make up one payment together. This new field gets exposed in a
number of places, though sadly only as an Option for backwards
compatibility when sending to a receiver/receiving from a sender
which does not support Base AMP.
Sadly a huge diff here, but almost all of it is changing the method
signatures for sending/receiving/failing HTLCs and the
PaymentReceived event, which all now need to expose an
Option<[u8; 32]> for the payment_secret.
It doesn't yet properly fail back pending HTLCs when the full AMP
payment is never received (which should result in accidental
channel force-closures). Further, as sending AMP payments is not
yet supported, the only test here is a simple single-path payment
with a payment_secret in it.
This partially reverts 933ae34703,
though note that 933ae34703 fixed a
similar deadlock while introducing this one.
If we have HTLCs to fail backwards, handle_error!() will call
finish_force_close_channel() which will attempt to lock channel_state
while it is locked at the original caller. Instead, hold the lock for
shorter scopes such that it is not held upon entering handle_error!().
Co-authored-by: Matt Corallo <git@bluematt.me>
Co-authored-by: Jeffrey Czyz <jkczyz@gmail.com>
If any monitors are out of sync with the Channel, we previously
closed the channel, but we should really only do that if the
monitor is ahead of the channel, opting to call the whole thing
invalid if the channel is ahead of the monitor.
Fixes issue #493 and should resolve some issues where other nodes
(incorrectly) reject channel_update/node_announcement messages
which have a serial number that is not a relatively recent
timestamp.
This is a somewhat-obvious oversight in the capabilities of
rust-lightning, though not a particularly interesting one until we
start relying on node_features (eg for variable-length-onions and
Base AMP).
Sadly its not fully automated as we don't really want to store the
list of available addresses from the user. However, with a simple
call to ChannelManager::broadcast_node_announcement and a sensible
peer_handler, the announcement is made.
This makes Readable symmetric with Writeable and makes sense -
something which is Readable should be Readable for any stream which
implements std::io::Read, not only for a stream type it decides on.
This solves some lifetime-compatibility issues in trying to read()
from a LengthLimitingReader in arbitrary Readable impls.
This provides a simple wrapper for deserializing right into an
Arc<ChannelManager>, which improves UX a tiny bit when working with
SimpleArcChannelManager types.
