Benchmarks were failing because node config and
channel monitor configs were tied to the same
lifetime.
Introducing a separate lifetime allows to avoid
out-of-order deallocation errors.
Creates a new `events::ClaimedHTLC` struct that contains the relevant
information about a claimed HTLC; e.g., the channel it arrived on, its ID, the
amount of the HTLC, the overall amount of the payment, etc. Adds appropriate
serialization support.
Adds a `Vec<events::ClaimedHTLC>` to the `ClaimingPayment`
structure. Populates this when creating the struct by converting the
`payment.htlcs` (which are `ClaimingHTLC` structs) into `event::ClaimedHTLC`
structs. This is a straightforward transformation.
Adds a `Vec<events::ClaimedHTLC>` to the `events::Event::PaymentClaimed`
enum. This is populated directly from the `ClaimingPayment`'s `htlcs` vec.
Fixes#2477.
In 0ad1f4c943 we fixed a nasty bug
where a failure to persist a `ChannelManager` faster than a
`ChannelMonitor` could result in the loss of a `PaymentSent` event,
eventually resulting in a `PaymentFailed` instead!
As noted in that commit, there's still some risk, though its been
substantially reduced - if we receive an `update_fulfill_htlc`
message for an outbound payment, and persist the initial removal
`ChannelMonitorUpdate`, then respond with our own
`commitment_signed` + `revoke_and_ack`, followed by receiving our
peer's final `revoke_and_ack`, and then persist the
`ChannelMonitorUpdate` generated from that, all prior to completing
a `ChannelManager` persistence, we'll still forget the HTLC and
eventually trigger a `PaymentFailed` rather than the correct
`PaymentSent`.
Here we fully fix the issue by delaying the final
`ChannelMonitorUpdate` persistence until the `PaymentSent` event
has been processed and document the fact that a spurious
`PaymentFailed` event can still be generated for a sent payment.
The original fix in 0ad1f4c943 is
still incredibly useful here, allowing us to avoid blocking the
first `ChannelMonitorUpdate` until the event processing completes,
as this would cause us to add event-processing delay in our general
commitment update latency. Instead, we ultimately race the user
handling the `PaymentSent` event with how long it takes our
`revoke_and_ack` + `commitment_signed` to make it to our
counterparty and receive the response `revoke_and_ack`. This should
give the user plenty of time to handle the event before we need to
make progress.
Sadly, because we change our `ChannelMonitorUpdate` semantics, this
change requires a number of test changes, avoiding checking for a
post-RAA `ChannelMonitorUpdate` until after we process a
`PaymentSent` event. Note that this does not apply to payments we
learned the preimage for on-chain - ensuring `PaymentSent` events
from such resolutions will be addressed in a future PR. Thus, tests
which resolve payments on-chain switch to a direct call to the
`expect_payment_sent` function with the claim-expected flag unset.
01847277b9 switched around the logic
for inbound channel construction to assign the outbound SCID alias
after constructing the `InboundV1Channel` object. Thus, the SCID
alias argument is now unused, and we remove it here.
If we have a pending inbound un-accepted channel but receive an
error message for it from our peer, or our peer disconnects, we
should remove the pending entry, ensuring any attempts to accept
it fail.
The ChannelMonitor::get_claimable_balances method provides a more
straightforward approach to the balance of a channel, which satisfies
most use cases. The computation of AvailableBalances::balance_msat is
complex and originally had a different purpose that is not applicable
anymore.
Create a new table in 'peer_state' to maintain unaccepted inbound
channels; i.e., a channel for which we've received an 'open_channel'
message but that user code has not yet confirmed for acceptance. When
user code accepts the channel (e.g. via 'accept_inbound_channel'),
create the channel object and as before.
Currently, the 'open_channel' message eagerly creates an
InboundV1Channel object before determining if the channel should be
accepted. Because this happens /before/ the channel has been assigned
a user identity (which happens in the handler for OpenChannelRequest),
the channel is assigned a random user identity. As part of the
creation process, the channel's cryptographic material is initialized,
which then uses this randomly generated value for the user's channel
identity e.g. in SignerProvider::generate_channel_keys_id.
By delaying the creation of the InboundV1Channel until /after/ the
channel has been accepted, we ensure that we defer cryptographic
initialization until we have given the user the opportunity to assign
an identity to the channel.
Because we don't know which custom TLV type numbers the user is
expecting (and it would be cumbersome for them to tell us), instead of
failing unknown even custom TLVs on deserialization, we accept all
custom TLVs, and pass them to the user to check whether they recognize
them and choose to fail back if they don't. However, a user may not
check for custom TLVs, in which case we should reject any even custom
TLVs as unknown.
This commit makes sure a user must explicitly accept a payment with
even custom TLVs, by (1) making the default
`ChannelManager::claim_funds` fail if the payment had even custom TLVs
and (2) adding a new function
`ChannelManager::claim_funds_with_known_custom_tlvs` that accepts them.
This commit also refactors our custom TLVs test and updates various
documentation to account for this.
When a user decodes custom TLVs, if they fail to recognize even type
numbers they should fail back with the correct failure code and fail
data. This new variant adds the proper failure variant for the user to
pass into `ChannelManager::fail_htlc_backwards_with_reason`.
Note that the enum discriminants were removed because when adding a
struct variant we can no longer make use of the discriminant through
casting like we previously did, and instead have to manually define the
associated failure code anyway.
When serialized, the TLVs in `OutboundOnionPayload`, unlike a normal
TLV stream, are prefixed with the length of the stream. To allow a user
to add arbitrary custom TLVs, we aren't able to communicate to our
serialization macros exactly which fields to expect, so this commit
adds new macro variants to allow appending an extra set of bytes (and
modifying the prefixed length accordingly).
Because the keysend preimage TLV has a type number in the custom type
range, and a user's TLVs may have type numbers above and/or below
keysend's type number, and because TLV streams must be serialized in
increasing order by type number, this commit also ensures the keysend
TLV is properly sorted/serialized amongst the custom TLVs.
Custom TLVs allow users to send extra application-specific data with
a payment. These have the additional flexibility compared to
`payment_metadata` that they don't have to reflect recipient generated
data provided in an invoice, in which `payment_metadata` could be
reused.
We ensure provided type numbers are unique, increasing, and within the
experimental range with the `RecipientOnionFields::with_custom_tlvs`
method.
This begins sender-side support for custom TLVs.
The current ChannelClosed event does not let
you know the counterparty during a channel close
event. This change adds the counterparty_node_id
and the channel_capacity to the ChannelClosed event.
This helps users to have more context during a
channel close event. Solves #2343
To support route blinding, we want to split OnionHopData into two separate
structs, one for inbound onions and one for outbound onions. This is because
blinded payloads change the fields present in the onion hop data struct based
on whether we're sending vs receiving (outbound onions include encrypted blobs,
inbound onions can decrypt those blobs and contain the decrypted fields
themselves).
In upcoming commits, we'll add variants for blinded payloads to the new
InboundPayload enum.
We introduce a `UnfundedChannelContext` which contains a counter for the
current age of an unfunded channel in timer ticks. This age is incremented
for every `ChannelManager::timer_tick_ocurred` and the unfunded channel
is removed if it exceeds `UNFUNDED_CHANNEL_AGE_LIMIT_TICKS`.
The value will not be persisted as unfunded channels themselves are not
persisted.
One of a series of follow-up commits to address some issues found
in PR 2077, where we split channels up into different maps and structs
depending on phase in their life.
We had some inconsistencies so far in referring to channels such as
`OutboundV1Channel` and `InboundV1Channel` as pending and unfunded.
From here we refer to these kinds of channels only as "unfunded".
This is a slight conflation with the term "unfunded" in the contexts
of denial of service mitigation. There, "unfunded" actually refers to
non-0conf, inbound channels that have not had their funding transaction
confirmed. This might warrant changing that usage to "unconfirmed inbound".
As done with inbound feerate updates, we can afford to commit less in
fees, as long as we still may the minimum mempool feerate. This enables
users to spend a bit more of their balance, as less funds are being
committed to transaction fees.
In an older PR a reviewer had asked why the discarding of a channel
being blocked on another monitor update is okay if the blocked
channel has since closed. At the time, this was not actually okay -
the monitor updates in the channel weren't moved to the
`ChannelManager` on close so the whole pipeline was busted, but
with the changes in 4041f0899f the
handling of channel closes with pending monitor updates is now
correct, and so is the existing code block.
If a `ChannelMonitorUpdate` completes being persisted, but the
`ChannelManager` isn't informed thereof (or isn't persisted) before
shutdown, on startup we may still have it listed as in-flight. When
we compare the available `ChannelMonitor` with the in-flight set,
we'll notice it completed and remove it, however this may leave
some post-update actions dangling which need to complete.
Here we handle this with a new `BackgroundEvent` indicating we need
to handle any post-update action(s) for a given channel.
If a channel has been closed, there may still be some
`ChannelMonitorUpdate`(s) which are pending completion. These
in-flight updates may also be blocking another channel from letting
an update fly, e.g. for forwarded payments where the payment
preimage will be removed from the downstream channel after the
upstream channel has closed.
Luckily all the infrastructure to handle this case is already in
place - we just need to process the
`monitor_update_blocked_actions` for closed channels.
This was a regression resulting from f2453b7 since we now process events
in a loop until there aren't any left. Processing events is done in
batches and they are not removed until we're done processing each batch.
Since handling a `PendingHTLCsForwardable` event will call back into the
`ChannelManager`, we'll still see the original forwarding event not
removed. Phantom payments will need an additional forwarding event
before being claimed to make them look real by taking more time.
Because `ChannelMonitorUpdate`s can complete asynchronously and
out-of-order now, a `commitment_signed` `ChannelMonitorUpdate` from
a downstream channel could complete prior to the preimage
`ChannelMonitorUpdate` on the upstream channel. In that case, we may
not get a `update_fulfill_htlc` replay on startup. Thus, we have to
ensure any payment preimages contained in that downstream update are
re-claimed on startup.
Here we do this during the existing walk of the `ChannelMonitor`
preimages for closed channels.
* `PhantomRouteHints::channels` has been written since the struct
was added in 410eb05365.
* `HTLCSource::path_hops` has been written since the struct was
converted to TLVs in 66784e32fe.
This commit makes use of the added enum to calculate the dust
exposure threshold based on the current fee rate. This also updates
tests to ensure it works as intended.
