`cur_counterparty_commitment_transaction_number` starts at
`INITIAL_COMMITMENT_NUMBER`, gets decremented once when the initial
`channel_ready` message is received, and gets decremented a second
time when the first `revoke_and_ack` is received, revoking the
first counterparty commitment point.
At this point, `counterparty_prev_commitment_point` points to the
non-revoked second commitment point.
If we then process a second `channel_ready`, we check the
`cur_counterparty_commitment_transaction_number` number, see that
if is `INITIAL_COMMITMENT_NUMBER - 2` (i.e. not `- 1`) and assume
that the *second* commitment number has been revoked (by
`expect`ing `CounterpartyCommitmentSecrets::get_secret` with
`INITIAL_COMMITMENT_NUMBER - 1`). This `expect` panic's.
As the second commitment point has not yet been revoked, we should
fetch it from `counterparty_prev_commitment_point`, which we do
here, adding a test which failed on the previous code as well.
Found by the `full_stack_target` fuzzer.
Like the previous commit, here we update the update_fee+commit
logic to simply push the fee update into the holding cell and then
use the standard holding-cell-freeing codepaths to actually send
the commitment update. This removes a substantial amount of code,
reducing redundant codepaths and keeping channel state machine
logic in channel.rs.
When we batch HTLC updates, we currently do the explicit queueing
plus the commitment generation in the `ChannelManager`. This is a
bit strange as its ultimately really a `Channel` responsibility to
generate commitments at the correct time, with the abstraction
leaking into `ChannelManager` with the `send_htlc` and
`get_update_fail_htlc` method docs having clear comments about
how `send_commitment` MUST be called prior to calling other
`Channel` methods.
Luckily `Channel` already has an update queue - the holding cell.
Thus, we can trivially rewrite the batch update logic as inserting
the desired updates into the holding cell and then asking all
channels to clear their holding cells.
When a channel is force-closed, if a `ChannelMonitor` update is
completed but a `ChannelManager` persist has not yet happened,
HTLCs which were removed in the latest (persisted) `ChannelMonitor`
update will not be failed even though they do not appear in the
commitment transaction which went on chain. This is because the
`ChannelManager` thinks the `ChannelMonitor` is responsible for
them (as it is stale), but the `ChannelMonitor` has no knowledge of
the HTLC at all (as it is not stale).
The fix for this is relatively simple - we need to check for this
specific case and fail back such HTLCs when deserializing a
`ChannelManager`
To do so, we introduce a new serialization version that doesn't store a
channel's signer, and instead stores its signer's `channel_keys_id`.
This is a unique identifier that can be provided to our `KeysInterface`
to re-derive all private key material for said channel.
We choose to not upgrade the minimum compatible serialization version
until a later time, which will also remove any signer serialization
logic on implementations of `KeysInterface` and `Sign`.
Now that ready_channel is also called on startup upon deserializing
channels, we opt to rename it to a more indicative name.
We also derive `PartialEq` on ChannelTransactionParameters to allow
implementations to determine whether `provide_channel_parameters` calls
are idempotent after the channel parameters have already been provided.
`get_channel_signer` previously had two different responsibilites:
generating unique `channel_keys_id` and using said ID to derive channel
keys. We decide to split it into two methods `generate_channel_keys_id`
and `derive_channel_signer`, such that we can use the latter to fulfill
our goal of re-deriving signers instead of persisting them. There's no
point in storing data that can be easily re-derived.
The `derive_{public,private}_revocation_key` methods hash the two
input keys and then multiply the two input keys by hashed values
before adding them together. Because addition can fail if the tweak
is the inverse of the secret key this method currently returns a
`Result`.
However, it is not cryptographically possible to reach the error
case - in order to create an issue, the point-multiplied-by-hash
values must be the inverse of each other, however each point
commits the SHA-256 hash of both keys together. Thus, because
changing either key changes the hashes (and the ultimate points
added together) in an unpredictable way, there should be no way to
construct such points.
The `derive_{public,private}_key` methods hash the two input keys
and then add them to the input public key. Because addition can
fail if the tweak is the inverse of the secret key this method
currently returns a `Result`.
However, it is not cryptographically possible to reach the error
case - in order to create an issue, the SHA-256 hash of the
`base_point` (and other data) must be the inverse of the
`base_point`('s secret key). Because changing the `base_point`
changes the hash in an unpredictable way, there should be no way to
construct such a `base_point`.
When we process a `channel_reestablish` message we free the HTLC
update holding cell as things may have changed while we were
disconnected. However, some time ago, to handle freeing from the
holding cell when a monitor update completes, we added a holding
cell freeing check in `get_and_clear_pending_msg_events`. This
leaves the in-`channel_reestablish` holding cell clear redundant,
as doing it immediately or is `get_and_clear_pending_msg_events` is
not a user-visible difference.
Thus, we remove the redundant code here, substantially simplifying
`handle_chan_restoration_locked` while we're at it.
LND nodes have very broken fee estimators, causing them to suggest
feerates that don't even meet a current mempool minimum feerate
when fees go up over the course of hours. This can cause us to
reject their feerate estimates as they're not high enough, even
though their new feerate is higher than what we had already (which
is the feerate we'll use to broadcast a closing transaction). This
implies we force-close the channel and broadcast something with a
feerate lower than our counterparty was offering.
Here we simply accept such feerates as they are better than what we
had. We really should also close the channel, but only after we
get their signature on the new feerate. That should happen by
checking channel feerates every time we see a new block so is
orthogonal to this code.
Ultimately the fix is anchor outputs plus package-based relay in
Bitcoin Core, however we're still quite some ways from that, so
worth needlessly closing channels for now.
We increase the `user_channel_id` type from `u64` to `u128`. In order to
maintain backwards compatibility, we have to de-/serialize it as two
separate `u64`s in `Event` as well as in the `Channel` itself.
Previously, `Confirm::get_relevant_txids()` only returned a list of
transactions that have to be monitored for reorganization out of the
chain. This interface however required double bookkeeping: while we
internally keep track of the best block, height, etc, it would also
require the user to keep track which transaction was previously
confirmed in which block and to take actions based on any change, e.g,
to reconfirm them when the block would be reorged-out and the
transactions had been reconfirmed in another block.
Here, we track the confirmation block hash internally and return it via
`Confirm::get_relevant_txids()` to the user, which alleviates the
requirement for double bookkeeping: the user can now simply check
whether the given transaction is still confirmed and in the given block,
and take action if not.
We also split `update_claims_view`: Previously it was one, now it's two
methods: `update_claims_view_from_matched_txn` and
`update_claims_view_from_requests`.
We rename `ChannelState::ChannelFunded` to `ChannelState::ChannelReady`
as we'll be in this state when both sides sent the `ChannelReady`
messages, which may also be before funding in the 0conf case.
As we're moving towards monitor update async being a supported
use-case, we shouldn't call an async monitor update "failed", but
rather "in progress". This simply updates the internal channel.rs
enum name to reflect the new thinking.
If the initial ChannelMonitor persistence is done asynchronously
but does not complete before the node restarts (with a
ChannelManager persistence), we'll start back up with a channel
present but no corresponding ChannelMonitor.
Because the Channel is pending-monitor-update and has not yet
broadcasted its initial funding transaction or sent channel_ready,
this is not a violation of our API contract nor a safety violation.
However, the previous code would refuse to deserialize the
ChannelManager treating it as an API contract violation.
The solution is to test for this case explicitly and drop the
channel entirely as if the peer disconnected before we received
the funding_signed for outbound channels or before sending the
channel_ready for inbound channels.
As we move towards specify supported/required feature bits in the
module(s) where they are supported, the global `known` feature set
constructors no longer make sense.
Here we stop relying on the `known` method in the channel modules.
Historically, LDK has considered the "set of known/supported
feature bits" to be an LDK-level thing. Increasingly this doesn't
make sense - different message handlers may provide or require
different feature sets.
In a previous PR, we began the process of transitioning with
feature bits sent to peers being sourced from the attached message
handler.
This commit makes further progress by moving the concept of which
feature bits are supported by our ChannelManager into
channelmanager.rs itself, via the new `provided_*_features`
methods, rather than in features.rs via the `known_channel_features`
and `known` methods.
Each test featuring HTLCs had a minimum and maximum feerate case. This
is no longer necessary for the zero HTLC transaction anchors variant as
the commitment feerate does not impact whether HTLCs can be trimmed or
not, only the dust limit does.
With the zero fee HTLC transaction anchors variant, HTLCs can no longer
be trimmed due to their amount being too low to have a mempool valid
HTLC transaction. Now they can only be trimmed based on the dust limit
of each party within the channel.
When we receive a block we always test if we should send our
channel_ready via `check_get_channel_ready`. If the channel in
question requires confirmations, we quickly return if the funding
transaction has not yet confirmed (or even been defined), however
for 0conf channels the checks are necessarily more involved.
In any case, we wish to panic if the funding transaction has
confirmations prior to when it should have been broadcasted. This
is useful as it is easy for users to violate our broadcast-time
invariants without noticing and the panic gives us an opportunity
to catch it.
Sadly, in the case of 0conf channels, if we hadn't yet seen the
funding transaction at all but receive a block we would hit this
sanity check as we don't check whether there are actually funding
transaction confirmations prior to panicing.
This method will help us avoid retrieving our node secret, something we want to
get rid of entirely. It will be used in upcoming commits when decoding the
onion message packet, and in future PRs to help us get rid of
KeysInterface::get_node_secret usages across the codebase
