Now that we allow `handle_channel_announcement` to (indirectly)
spawn async tasks which will complete later, we have to ensure it
can apply backpressure all the way up to the TCP socket to ensure
we don't end up with too many buffers allocated for UTXO
validation.
We do this by adding a new method to `RoutingMessageHandler` which
allows it to signal if there are "many" checks pending and
`channel_announcement` messages should be delayed. The actual
`PeerManager` implementation thereof is done in the next commit.
Gossip messages which were verified against the chain
asynchronously should still be forwarded to peers, but must now go
out via a new `P2PGossipSync` parameter in the
`AccessResolver::resolve` method, allowing us to wire them up to
the `P2PGossipSync`'s `MessageSendEventsProvider` implementation.
If we have a `channel_announcement` which is waiting on a UTXO
lookup before we can process it, and we receive a `channel_update`
or `node_announcement` for the same channel or a node which is a
part of the channel, we have to wait until the lookup completes
until we can decide if we want to accept the new message.
Here, we store the new message in the pending lookup state and
process it asynchronously like the original `channel_announcement`.
For those operating in an async environment, requiring
`ChainAccess::get_utxo` return information about the requested UTXO
synchronously is incredibly painful. Requesting information about a
random UTXO is likely to go over the network, and likely to be a
rather slow request.
Thus, here, we change the return type of `get_utxo` to have both a
synchronous and asynchronous form. The asynchronous form requires
the user construct a `AccessFuture` which they `clone` and pass
back to us. Internally, an `AccessFuture` has an `Arc` to the
`channel_announcement` message which we need to process. When the
user completes their lookup, they call `resolve` on their
`AccessFuture` which we pull the `channel_announcement` from and
then apply to the network graph.
The `chain::Access` trait (and the `chain::AccessError` enum) is a
bit strange - it only really makes sense if users import it via the
`chain` module, otherwise they're left with a trait just called
`Access`. Worse, for bindings users its always just called
`Access`, in part because many downstream languages don't have a
mechanism to import a module and then refer to it.
Further, its stuck dangling in the `chain` top-level mod.rs file,
sitting in a module that doesn't use it at all (it's only used in
`routing::gossip`).
Instead, we give it its full name - `UtxoLookup` (and rename the
error enum `UtxoLookupError`) and put it in the a new
`routing::utxo` module, next to `routing::gossip`.
Also swaps `PublicKey` for `NodeId` in `get_next_node_announcement`
and `InitSyncTracker` to avoid unnecessary deserialization that came
from changing `UnsignedNodeAnnouncement`.
Adds the macro `get_pubkey_from_node_id`
to parse `PublicKey`s back from `NodeId`s for signature
verification, as well as `make_funding_redeemscript_from_slices`
to avoid parsing back and forth between types.
Our network graph has to be iterable in a deterministic order and
with the ability to iterate over a specific range. Thus,
historically, we've used a `BTreeMap` to do the iteration. This is
fine, except our map needs to also provide high performance lookups
in order to make route-finding fast. Sadly, `BTreeMap`s are quite
slow due to the branching penalty.
Here we replace the `BTreeMap`s in the scorer with a dummy wrapper.
In the next commit the internals thereof will be replaced with a
`HashMap`-based implementation.
As evidenced by the previous commit, it appears our A* router
does worse than a more naive approach. This isn't super surpsising,
as the A* heuristic calculation requires a map lookup, which is
relatively expensive.
```
test routing::router::benches::generate_mpp_routes_with_probabilistic_scorer ... bench: 169,991,943 ns/iter (+/- 30,838,048)
test routing::router::benches::generate_mpp_routes_with_zero_penalty_scorer ... bench: 122,144,987 ns/iter (+/- 61,708,911)
test routing::router::benches::generate_routes_with_probabilistic_scorer ... bench: 48,546,068 ns/iter (+/- 10,379,642)
test routing::router::benches::generate_routes_with_zero_penalty_scorer ... bench: 32,898,557 ns/iter (+/- 14,157,641)
```
Historically we've had various bugs in keeping the
`lowest_inbound_channel_fees` field in `NodeInfo` up-to-date as we
go. This leaves the A* routing less efficient as it can't prune
hops as aggressively.
In order to get accurate benchmarks, this commit updates the
minimum-inbound-fees field on load. This is not the most efficient
way of doing so, but suffices for fetching benchmarks and will be
removed in the coming commits.
Note that this is *slower* than the non-updating version in the
previous commit. While I haven't dug into this incredibly deeply,
the graph snapshot in use has min-fee info for only 9,618 of
20,818 nodes. Thus, it is my guess that with the graph snapshot
as-is the branch predictor is able to largely remove the A*
heuristic lookups, but with this change it is forced to wait for
A* heuristic map lookups to complete, causing a performance
regression.
```
test routing::router::benches::generate_mpp_routes_with_probabilistic_scorer ... bench: 182,980,059 ns/iter (+/- 32,662,047)
test routing::router::benches::generate_mpp_routes_with_zero_penalty_scorer ... bench: 151,170,457 ns/iter (+/- 75,351,011)
test routing::router::benches::generate_routes_with_probabilistic_scorer ... bench: 58,187,277 ns/iter (+/- 11,606,440)
test routing::router::benches::generate_routes_with_zero_penalty_scorer ... bench: 41,210,193 ns/iter (+/- 18,103,320)
```
This is purely a refactor that does not change the InitFeatures
advertised by a ChannelManager. This allows users to configure which
features should be advertised based on the values of `UserConfig`. While
there aren't any existing features currently leveraging this behavior,
it will be used by the upcoming anchors_zero_fee_htlc_tx feature.
The UserConfig dependency on provided_init_features caused most
callsites of the main test methods responsible for opening channels to
be updated. This commit foregos that completely by no longer requiring
the InitFeatures of each side to be provided to these methods. The
methods already require a reference to each node's ChannelManager to
open the channel, so we use that same reference to obtain their
InitFeatures. A way to override such features was required for some
tests, so a new `override_init_features` config option now exists on
the test harness.
Every exported macro needed to have all the macros used inside it:
1- to be exported as well.
2- be called from the `$crate` namespace so it works in other crates.
Some structs in `lightning::util::ser` needed to be made public as they were used inside the exported macros.
Use the macros like this:
```Rust
lightning::impl_writeable_tlv_based!(...)
```
Strings defined by third parties may contain control characters. Provide
a wrapper such that these are replaced when displayed. Useful in node
aliases and offer fields.
Because we now never generate an `EffectiveCapacity` with an
`htlc_maximum_msat` set to `None`, making it non-`Option`al
effectively removes dead code, which we do here.
We currently construct `DirectedChannelInfo`s for routing before
checking if the given direction has its directional info filled in.
We then always check for directional info before actually deciding
to route over a channel, as otherwise we assume the channel is not
online.
This makes for somewhat redundant checks, and `DirectedCHannelInfo`
isn't, by itself, a very useful API. Because fetching the HTLC-max
or effective channel capacity gives spurious data if no directional
info is available, there's little reason to have that data
available, and so we here check for directional info first. This
effectively merges `DirectionalChannelInfo` and
`DirectionalChannelInfoWithUpdate`.
While applying gossip info from RGS-server, number of harmless
errors might arise which should be ignored. E.g. client should not
fail if there is a duplicate gossip for same channel or duplicate
update.
We never had the `NetworkGraph::node_failed` method implemented. The
scorer now handles non-permanent failures by downgrading nodes, so we
don't want that implemented.
The method is renamed to `node_failed_permanent` to explicitly indicate
that this is the only case it handles. We also add tracking in the form
of two maps as fields of `NetworkGraph`, namely, `removed_nodes` and
`removed_channels`. We track these removed graph entries to ensure we
don't just resync them right away from gossip soon after removing them.
We stop tracking these removed nodes whenever `remove_stale_channels_and_tracking()`
is called and the entries have been tracked for longer than
`REMOVED_ENTRIES_TRACKING_AGE_LIMIT_SECS` which is currently set to one
week.
As we move towards specify supported/required feature bits in the
module(s) where they are supported, the global `known` feature set
constructors no longer make sense.
Here we stop relying on the `known` method in the `routing` module,
which was only used in tests.
As we remove the concept of a global "known/supported" feature set
in LDK, we should also remove the concept of a global "required"
feature set. This does so by moving the checks for specific
required features into handlers.
Specifically, it allows the handler `peer_connected` method to
return an `Err` if the peer should be disconnected. Only one such
required feature bit is currently set - `static_remote_key`, which
is required in `ChannelManager`.
When we broadcast a node announcement, the features we support are really a
combination of all the various features our different handlers support. This
commit captures this concept by OR'ing our NodeFeatures across both our channel
and routing message handlers.
When we go to send an Init message to new peers, the features we
support are really a combination of all the various features our
different handlers support. This commit captures this concept by
OR'ing our InitFeatures across both our Channel and Routing
handlers.
Note that this also disables setting the `initial_routing_sync`
flag in init messages, as was intended in
e742894492, per the comment added on
`clear_initial_routing_sync`, though this should not be a behavior
change in practice as nodes which support gossip queries ignore the
initial routing sync flag.
The `rejected_by_dest` field of the `PaymentPathFailed` event has
always been a bit of a misnomer, as its really more about retry
than where a payment failed. Now is as good a time as any to
rename it.
Added two methods, `process_path_inflight_htlcs` and
`remove_path_inflight_htlcs`, that updates that `payment_cache` map with
path information that may have failed, succeeded, or have been given up
on.
Introduced `AccountForInflightHtlcs`, which will wrap our user-provided
scorer. We move the `S:Score` type parameterization from the `Router` to
`find_route`, so we can use our newly introduced
`AccountForInflightHtlcs`.
`AccountForInflightHtlcs` keeps track of a map of inflight HTLCs by
their short channel id, direction, and give us the value that is being
used up.
This map will in turn be populated prior to calling `find_route`, where
we’ll use `create_inflight_map`, to generate a current map of all
inflight HTLCs based on what was stored in `payment_cache`.
