If routing nodes take less fees and pay the final node more than
`amt_to_forward`, the receiver may see that `total_msat` has been met
before all of the sender's intended HTLCs have arrived. The receiver
may then prematurely claim the payment and release the payment hash,
allowing routing nodes to claim the remaining HTLCs. Using the onion
value `amt_to_forward` to determine when `total_msat` has been met
allows the sender to control the set total.
Final nodes previously had stricter requirements on HTLC contents
matching onion value compared to intermediate nodes. This allowed
for probing, i.e. the last intermediate node could overshoot the
value by a small amount and conclude from the acceptance or rejection
of the HTLC whether the next node was the destination. This also
applies to the msat amount, however this change was already present.
While retrying a failed path of an MPP, a node may want to overshoot
the `total_msat` in order to use a path with an `htlc_minimum_msat`
greater than the remaining value being sent. This commit no longer
fails MPPs that overshoot the `total_msat`, however it does fail
HTLCs with the same payment hash that are received *after* a
payment has become claimable.
This is pre-work for allowing nodes to overshoot onion values and
changing validation for MPP completion. This adds a field to
`ClaimableHTLC` that is separate from the onion values, which
represents the actual received amount reported in `PaymentClaimable`
which is what we want to validate against when a user goes to claim.
`ChannelMonitorUpdate`s are our most size-sensitive objects - they
are the minimal objects which need to be written to disk on each
commitment update. Thus, we should be careful to ensure we don't
pack too much extraneous information into each one.
Here we add future support for removing the per-HTLC explicit
`Option<Signature>` and `HTLCInCommitmentUpdate` for non-dust HTLCs
in holder commitment tx updates, which are redundant with the
`HolderCommitmentTransaction`.
While we cannot remove them entirely as previous versions rely on
them, adding support for filling in the in-memory structures from
the redundant fields will let us remove them in a future version.
We also add test-only generation logic to test the new derivation.
This is largely motivated by some follow-up work for anchors that will
introduce an event handler for `BumpTransaction` events, which we can
now include in this new top-level `events` module.
This results in a new, potentially redundant, `ChannelMonitorUpdate`
that must be applied to `ChannelMonitor`s to broadcast the holder's
latest commitment transaction.
This is a behavior change for anchor channels since their commitments
may require additional fees to be attached through a child anchor
transaction. Recall that anchor transactions are only generated by the
event consumer after processing a `BumpTransactionEvent::ChannelClose`
event, which is yielded after applying a
`ChannelMonitorUpdateStep::ChannelForceClosed` monitor update. Assuming
the node operator is not watching the mempool to generate these anchor
transactions without LDK, an anchor channel which we had to fail when
deserializing our `ChannelManager` would have its commitment transaction
broadcast by itself, potentially exposing the node operator to loss of
funds if the commitment transaction's fee is not enough to be accepted
into the network's mempools.
While we already provide a `list_channels` method, it could result in
quite a large `Vec<ChannelDetails>`. Here, we provide the means to query
our channels by `counterparty_node_id` and DRY up the code.
`FaliureCode` is a trivial enum with no body, so we shouldn't be
passing it by reference. Its sufficiently strange that the Java
bindings aren't happy with it, which is fine, we should just fix it
here.
When we receive an update_fulfill_htlc message, we immediately try
to "claim" the HTLC against the HTLCSource. If there is one, this
works great, we immediately generate a `ChannelMonitorUpdate` for
the corresponding inbound HTLC and persist that before we ever get
to processing our counterparty's `commitment_signed` and persisting
the corresponding `ChannelMonitorUpdate`.
However, if there isn't one (and this is the first successful HTLC
for a payment we sent), we immediately generate a `PaymentSent`
event and queue it up for the user. Then, a millisecond later, we
receive the `commitment_signed` from our peer, removing the HTLC
from the latest local commitment transaction as a side-effect of
the `ChannelMonitorUpdate` applied.
If the user has processed the `PaymentSent` event by that point,
great, we're done. However, if they have not, and we crash prior to
persisting the `ChannelManager`, on startup we get confused about
the state of the payment. We'll force-close the channel for being
stale, and see an HTLC which was removed and is no longer present
in the latest commitment transaction (which we're broadcasting).
Because we claim corresponding inbound HTLCs before updating a
`ChannelMonitor`, we assume such HTLCs have failed - attempting to
fail after having claimed should be a noop. However, in the
sent-payment case we now generate a `PaymentFailed` event for the
user, allowing an HTLC to complete without giving the user a
preimage.
Here we address this issue by storing the payment preimages for
claimed outbound HTLCs in the `ChannelMonitor`, in addition to the
existing inbound HTLC preimages already stored there. This allows
us to fix the specific issue described by checking for a preimage
and switching the type of event generated in response. In addition,
it reduces the risk of future confusion by ensuring we don't fail
HTLCs which were claimed but not fully committed to before a crash.
It does not, however, full fix the issue here - because the
preimages are removed after the HTLC has been fully removed from
available commitment transactions if we are substantially delayed
in persisting the `ChannelManager` from the time we receive the
`update_fulfill_htlc` until after a full commitment signed dance
completes we may still hit this issue. The full fix for this issue
is to delay the persistence of the `ChannelMonitorUpdate` until
after the `PaymentSent` event has been processed. This avoids the
issue entirely, ensuring we process the event before updating the
`ChannelMonitor`, the same as we ensure the upstream HTLC has been
claimed before updating the `ChannelMonitor` for forwarded
payments.
The full solution will be implemented in a later work, however this
change still makes sense at that point as well - if we were to
delay the initial `commitment_signed` `ChannelMonitorUpdate` util
after the `PaymentSent` event has been processed (which likely
requires a database update on the users' end), we'd hold our
`commitment_signed` + `revoke_and_ack` response for two DB writes
(i.e. `fsync()` calls), making our commitment transaction
processing a full `fsync` slower. By making this change first, we
can instead delay the `ChannelMonitorUpdate` from the
counterparty's final `revoke_and_ack` message until the event has
been processed, giving us a full network roundtrip to do so and
avoiding delaying our response as long as an `fsync` is faster than
a network roundtrip.
The `get_err_msg!()` macro has no reason to be a macro so here we
move its logic to a function and leave the macro in place to avoid
touching every line of code in the tests.
This reduces the `--profile=test --lib` `Zpretty=expanded` code
size from 322,183 LoC to 321,985 LoC.
The `get_revoke_commit_msgs!()` macro has no reason to be a macro
so here we move its logic to a function and leave the macro in
place to avoid touching every line of code in the tests.
This reduces the `--profile=test --lib` `Zpretty=expanded` code
size from 324,763 LoC to 322,183 LoC.
Our lockdep logic (on Windows) identifies a mutex based on which
line it was constructed on. Thus, if we have two mutexes
constructed on the same line it will generate false positives.
Taking two instances of the same mutex may be totally fine, but it
requires a total lockorder that we cannot (trivially) check. Thus,
its generally unsafe to do if we can avoid it.
To discourage doing this, here we default to panicing on such locks
in our lockorder tests, with a separate lock function added that is
clearly labeled "unsafe" to allow doing so when we can guarantee a
total lockorder.
This requires adapting a number of sites to the new API, including
fixing a bug this turned up in `ChannelMonitor`'s `PartialEq` where
no lockorder was guaranteed.
When handling a `ChannelMonitor` update via the new
`handle_new_monitor_update` macro, we always call the macro with
the `per_peer_state` read lock held and have the macro drop the
per-peer state lock. Then, when handling the resulting updates, we
may take the `per_peer_state` read lock again in another function.
In a coming commit, recursive read locks will be disallowed, so we
have to drop the `per_peer_state` read lock before calling
additional functions in `handle_new_monitor_update`, which we do
here.
Our existing lockorder tests assume that a read lock on a thread
that is already holding the same read lock is totally fine. This
isn't at all true. The `std` `RwLock` behavior is
platform-dependent - on most platforms readers can starve writers
as readers will never block for a pending writer. However, on
platforms where this is not the case, one thread trying to take a
write lock may deadlock with another thread that both already has,
and is attempting to take again, a read lock.
Worse, our in-tree `FairRwLock` exhibits this behavior explicitly
on all platforms to avoid the starvation issue.
Sadly, a user ended up hitting this deadlock in production in the
form of a call to `get_and_clear_pending_msg_events` which holds
the `ChannelManager::total_consistency_lock` before calling
`process_pending_monitor_events` and eventually
`channel_monitor_updated`, which tries to take the same read lock
again.
Luckily, the fix is trivial, simply remove the redundand read lock
in `channel_monitor_updated`.
Fixes#2000
We previously avoided holding the `total_consistency_lock` while
doing crypto operations to build onions. However, now that we've
abstracted out the outbound payment logic into a utility module,
ensuring the state is consistent at all times is now abstracted
away from code authors and reviewers, making it likely to break.
Further, because we now call `send_payment_along_path` both with,
and without, the `total_consistency_lock`, and because recursive
read locks may deadlock, it would now be quite difficult to figure
out which paths through `outbound_payment` need the lock and which
don't.
While it may slow writes somewhat, it's not really worth trying to
figure out this mess, instead we just hold the
`total_consistency_lock` before going into `outbound_payment`
functions.
fbc08477e8 purported to "move" the
`final_cltv_expiry_delta` field to `PaymentParamters` from
`RouteParameters`. However, for naive backwards-compatibility
reasons it left the existing on in place and only added a new,
redundant field in `PaymentParameters`.
It turns out there's really no reason for this - if we take a more
critical eye towards backwards compatibility we can figure out the
correct value in every `PaymentParameters` while deserializing.
We do this here - making `PaymentParameters` a `ReadableArgs`
taking a "default" `cltv_expiry_delta` when it goes to read. This
allows existing `RouteParameters` objects to pass the read
`final_cltv_expiry_delta` field in to be used if the new field
wasn't present.
When we read a `Route` (or a list of `RouteHop`s), we should never
have zero paths or zero `RouteHop`s in a path. As such, its fine to
simply reject these at deserialization-time. Technically this could
lead to something which we can generate not round-trip'ing
serialization, but that seems okay here.
Forcing users to pass a genesis block hash has ended up being
error-prone largely due to byte-swapping questions for bindings
users. Further, our API is currently inconsistent - in
`ChannelManager` we take a `Bitcoin::Network` but in `NetworkGraph`
we take the genesis block hash.
Luckily `NetworkGraph` is the only remaining place where we require
users pass the genesis block hash, so swapping it for a `Network`
is a simple change.
Prior to this, we returned PaymentSendFailure from auto retry send payment
methods. This implied that we might return a PartialFailure from them, which
has never been the case. So it makes sense to rework the errors to be a better
fit for the methods.
We're taking error handling in a totally different direction now to make it
more asynchronous, see send_payment_internal for more information.
