This adds the new `payment_metadata` to `RecipientOnionFields`,
passing the metadata from BOLT11 invoices through the send pipeline
and finally copying them info the onion when sending HTLCs.
This completes send-side support for the new payment metadata
feature.
We correctly send out a gossip channel disable update after one
full time tick being down (1-2 minutes). This is pretty nice in
that it avoids nodes trying to route through our nodes too often
if they're down. Other nodes have a much longer time window,
causing them to have much less aggressive channel disables. Sadly,
at one minute it's not super uncommon for tor nodes to get disabled
(once a day or so on two nodes I looked at), and this causes the
lightning terminal scorer to consider the LDK node unstable (even
though it's the one doing the disabling - so is online). This
causes user frustration and makes LDK look bad (even though it's
probably failing fewer payments).
Given this, and future switches to block-based `channel_update`
timestamp fields, it makes sense to go ahead and switch to delaying
channel disable announcements for 10 minutes. This puts us more in
line with other implementations and reduces gossip spam, at the
cost of less reliable payments.
Fixes#2175, at least the currently visible parts.
When generating a `channel_update` either in response to a fee
configuration change or an HTLC failure, we currently poll the
channel to check if the peer's connected when setting the disabled
bit in the `channel_update`. This could cause cases where we set
the disable bit even though the peer *just* disconnected, and don't
generate a followup broadcast `channel_update` with the disabled
bit unset.
While a node generally shouldn't rebroadcast a `channel_update` it
received in an onion, there's nothing inherently stopping them from
doing so. Obviously in the fee-update case we expect the message to
propagate.
Luckily, since we already "stage" disable-changed updates, we can
check the staged state and use that to set the disabled bit in all
`channel_update` cases.
In our test utilities, we generally refer to a `Node` struct which
holds a `ChannelManager` and a number of other structs. However, we
use the same utilities in benchmarking, where we have a different
`Node`-like struct. This made moving from macros to functions
entirely impossible, as we end up needing multiple types in a given
context.
Thus, here, we take the pain and introduce some wrapper traits
which encapsulte what we need from `Node`, swapping some of our
macros to functions.
In 6090d9e6a8 we swapped out old
debug assertions that checked that a lock was `try_lock`able to
test that certain locks weren't held when we needed to be able to
take them in some near branch. However, another slipped in after in
the `ChannelMonitorUpdate` handling rework, which is replaced with
the new debug assertions here.
Now that we guarantee `claim_payment` will always succeed we have
to let the user know what the deadline is. We still fail payments
if they haven't been claimed in time, which we now expose in
`PaymentClaimable`.
There's no reason to hold a lock on `per_peer_state` while we're
claiming from a since-closed channel via a `ChannelMonitorUpdate`,
which we stop doing here.
`handle_error` must be called without `per_peer_state` mutex or
`pending_events` mutex locks held or we may risk deadlocks.
Previously we checked this in debug builds in the error path, but
not in the success path.
As it turns out, `funding_transaction_generated`'s error path does
hold a `per_peer_state` lock, which we fix here as well as move the
tests to happen unconditionally.
This passes the new `RecipientOnionFields` through the internal
sending APIs, ensuring we have access to the full struct when we
go to construct the sending onion so that we can include any new
fields added there.
While most lightning nodes don't (currently) support providing a
payment secret or payment metadata for spontaneous payments,
there's no specific technical reason why we shouldn't support
sending those fields to a recipient.
Further, when we eventually move to allowing custom TLV entries in
the recipient's onion TLV stream, we'll want to support it for
spontaneous payments as well.
Here we simply add the new `RecipientOnionFields` struct as an
argument to the spontaneous payment send methods. We don't yet
plumb it through the payment sending logic, which will come when we
plumb the new struct through the sending logic to replace the
existing payment secret arguments.
This moves the public payment sending API from passing an explicit
`PaymentSecret` to a new `RecipientOnionFields` struct (which
currently only contains the `PaymentSecret`). This gives us
substantial additional flexibility as we look at add both
`PaymentMetadata`, a new (well, year-or-two-old) BOLT11 invoice
extension to provide additional data sent to the recipient.
In the future, we should also add the ability to add custom TLV
entries in the `RecipientOnionFields` struct.
Many of the fields in `HTLCSource::OutboundRoute` are used to
rebuild the pending-outbound-payment map on reload if the
`ChannelManager` was not serialized though `ChannelMonitor`(s)
were after an HTLC was sent. As of 0.0.114, however, such payments
are not retryable without allowing them to fail and doing a full,
fresh, send.
Thus, some of the fields can be safely removed - we only really
care about having enough information to provide the user a failure
event, not being able to retry.
Here we drop one such field - the `payment_secret`, making our
`ChannelMonitorUpdate`s another handful of bytes smaller.
Previously, LDK would refuse to claim a payment if a channel on
which the payment was received had been closed between when the
HTLC was received and when we went to claim it. This makes sense in
the payment case - why pay an on-chain fee to claim the HTLC when
presumably the sender may retry later. Long ago it also reduced
total code in the claim pipeline.
However, this doesn't make sense if you're trying to do an atomic
swap or some other protocol that requires atomicity with some other
action - if your money got claimed elsewhere you need to be able to
claim the HTLC in lightning no matter what. Further, this is an
over-optimization - there should be a very, very low likelihood
that a channel closes between when we receive the last HTLC for a
payment and the user goes to claim the payment. Since we now have
code to handle this anyway we should allow it.
Fixes#2017.
Currently, users don't have good way of being notified when channel open
negotiations have succeeded and new channels are pending confirmation on
chain. To this end, we add a new `ChannelPending` event that is emitted
when send or receive a `funding_signed` message, i.e., at the last
moment before waiting for the confirmation period.
We track whether the event had previously been emitted in `Channel` and
remove it from `internal_funding_created` entirely. Hence, we now
only emit the event after ChannelMonitorUpdate completion, or upon
channel reestablish. This mitigates a race condition where where we
wouldn't persist the event *and* wouldn't regenerate it on restart,
therefore potentially losing it, if async CMU wouldn't complete before
ChannelManager persistence.
In `no-std`, we exposed `wait` functions which rely on a dummy
`Condvar` which never actually sleeps. This is somwhat nonsensical,
not to mention confusing to users. Instead, we simply remove the
`wait` methods in `no-std` builds.
Rather than having three ways to await a `ChannelManager` being
persistable, this moves to just exposing the awaitable `Future` and
having sleep functions on that.
If routing nodes take less fees and pay the final node more than
`amt_to_forward`, the receiver may see that `total_msat` has been met
before all of the sender's intended HTLCs have arrived. The receiver
may then prematurely claim the payment and release the payment hash,
allowing routing nodes to claim the remaining HTLCs. Using the onion
value `amt_to_forward` to determine when `total_msat` has been met
allows the sender to control the set total.
Final nodes previously had stricter requirements on HTLC contents
matching onion value compared to intermediate nodes. This allowed
for probing, i.e. the last intermediate node could overshoot the
value by a small amount and conclude from the acceptance or rejection
of the HTLC whether the next node was the destination. This also
applies to the msat amount, however this change was already present.
While retrying a failed path of an MPP, a node may want to overshoot
the `total_msat` in order to use a path with an `htlc_minimum_msat`
greater than the remaining value being sent. This commit no longer
fails MPPs that overshoot the `total_msat`, however it does fail
HTLCs with the same payment hash that are received *after* a
payment has become claimable.
This is pre-work for allowing nodes to overshoot onion values and
changing validation for MPP completion. This adds a field to
`ClaimableHTLC` that is separate from the onion values, which
represents the actual received amount reported in `PaymentClaimable`
which is what we want to validate against when a user goes to claim.
`ChannelMonitorUpdate`s are our most size-sensitive objects - they
are the minimal objects which need to be written to disk on each
commitment update. Thus, we should be careful to ensure we don't
pack too much extraneous information into each one.
Here we add future support for removing the per-HTLC explicit
`Option<Signature>` and `HTLCInCommitmentUpdate` for non-dust HTLCs
in holder commitment tx updates, which are redundant with the
`HolderCommitmentTransaction`.
While we cannot remove them entirely as previous versions rely on
them, adding support for filling in the in-memory structures from
the redundant fields will let us remove them in a future version.
We also add test-only generation logic to test the new derivation.
This is largely motivated by some follow-up work for anchors that will
introduce an event handler for `BumpTransaction` events, which we can
now include in this new top-level `events` module.
This results in a new, potentially redundant, `ChannelMonitorUpdate`
that must be applied to `ChannelMonitor`s to broadcast the holder's
latest commitment transaction.
This is a behavior change for anchor channels since their commitments
may require additional fees to be attached through a child anchor
transaction. Recall that anchor transactions are only generated by the
event consumer after processing a `BumpTransactionEvent::ChannelClose`
event, which is yielded after applying a
`ChannelMonitorUpdateStep::ChannelForceClosed` monitor update. Assuming
the node operator is not watching the mempool to generate these anchor
transactions without LDK, an anchor channel which we had to fail when
deserializing our `ChannelManager` would have its commitment transaction
broadcast by itself, potentially exposing the node operator to loss of
funds if the commitment transaction's fee is not enough to be accepted
into the network's mempools.
