ChannelMonitor keeps track of the last block connected. However, it is
initialized with the default block hash, which is a problem if the
ChannelMonitor is serialized before a block is connected. Instead, pass
ChannelManager's last_block_hash, which is initialized with a "birthday"
hash, when creating a new ChannelMonitor.
Tracking the last block was only used to de-duplicate block_connected
calls, but this is no longer required as of the previous commit.
Further, the ChannelManager can pass the latest block hash when needing
to create a ChannelMonitor rather than have each Channel maintain an
up-to-date copy. This is implemented in the next commit.
Calling block_connected for the same block was necessary when clients
were expected to re-fetch filtered blocks with relevant transactions. At
the time, all listeners were notified of the connected block again for
re-scanning. Thus, de-duplication logic was put in place.
However, this requirement is no longer applicable for ChannelManager as
of commit bd39b20f64, so remove this
logic.
The instructions for `ChannelManagerReadArgs` indicate that you need
to connect blocks on a newly-deserialized `ChannelManager` in a
separate pass from the newly-deserialized `ChannelMontiors` as the
`ChannelManager` assumes the ability to update the monitors during
block [dis]connected events, saying that users need to:
```
4) Reconnect blocks on your ChannelMonitors
5) Move the ChannelMonitors into your local chain::Watch.
6) Disconnect/connect blocks on the ChannelManager.
```
This is fine for `ChannelManager`'s purpose, but is very awkward
for users. Notably, our new `lightning-block-sync` implemented
on-load reconnection in the most obvious (and performant) way -
connecting the blocks all at once, violating the
`ChannelManagerReadArgs` API.
Luckily, the events in question really don't need to be processed
with the same urgency as most channel monitor updates. The only two
monitor updates which can occur in block_[dis]connected is either
a) in block_connected, we identify a now-confirmed commitment
transaction, closing one of our channels, or
b) in block_disconnected, the funding transaction is reorganized
out of the chain, making our channel no longer funded.
In the case of (a), sending a monitor update which broadcasts a
conflicting holder commitment transaction is far from
time-critical, though we should still ensure we do it. In the case
of (b), we should try to broadcast our holder commitment transaction
when we can, but within a few minutes is fine on the scale of
block mining anyway.
Note that in both cases cannot simply move the logic to
ChannelMonitor::block[dis]_connected, as this could result in us
broadcasting a commitment transaction from ChannelMonitor, then
revoking the now-broadcasted state, and only then receiving the
block_[dis]connected event in the ChannelManager.
Thus, we move both events into an internal invent queue and process
them in timer_chan_freshness_every_min().
The return value from Channel::force_shutdown previously always
returned a `ChannelMonitorUpdate`, but expected it to only be
applied in the case that it *also* returned a Some for the funding
transaction output.
This is confusing, instead we move the `ChannelMontiorUpdate`
inside the Option, making it hold a tuple instead.
ChainMonitor accesses a set of ChannelMonitors behind a single Mutex.
As a result, update_channel operations cannot be parallelized. It also
requires using a RefCell around a ChannelMonitor when implementing
chain::Listen.
Moving the Mutex into ChannelMonitor avoids these problems and aligns it
better with other interfaces. Note, however, that get_funding_txo and
get_outputs_to_watch now clone the underlying data rather than returning
references.
* Implemented protocol.
* Made feature optional.
* Verify that the default value is true.
* Verify that on shutdown,
if Channel.supports_shutdown_anysegwit is enabled,
the script can be a witness program.
* Added a test that verifies that a scriptpubkey
for an unreleased segwit version is handled successfully.
* Added a test that verifies that
if node has op_shutdown_anysegwit disabled,
a scriptpubkey with an unreleased segwit version on shutdown
throws an error.
* Added peer InitFeatures to handle_shutdown
* Check if shutdown script is valid when given upfront.
* Added a test to verify that an invalid test results in error.
* Added a test to check that if a segwit script with version 0 is provided,
the updated anysegwit check detects it and returns unsupported.
* An empty script is only allowed when sent as upfront shutdown script,
so make sure that check is only done for accept/open_channel situations.
* Instead of reimplementing a variant of is_witness_script,
just call it and verify that the witness version is not 0.
The `ChannelKeys` object really isn't about keys at all anymore,
its all about signing. At the same time, we rename the type aliases
used in traits from both `ChanKeySigner` and `Keys` to just
`Signer` (or, in contexts where Channel isnt clear, `ChanSigner`).
Instead of `key_derivation_params` being a rather strange type, we
call it `channel_keys_id` and give it a generic 32 byte array. This
should be much clearer for users and also more flexible.
Signing the commitment transaction is almost always followed by signing the attached HTLC transactions, so fold the signing operations into a single method.
This drops any direct calls to a generic `ChannelKeys::read()` and
replaces it with the new `KeysInterface::read_chan_signer()`. Still,
under the hood all of our own `KeysInterface::read_chan_signer()`
implementations simply call out to a `Readable::read()` implemention.
This adds a new method to the general cross-channel `KeysInterface`
which requires it to handle the deserialization of per-channel
signer objects. This allows the deserialization of per-channel
signers to have more context available, which, in the case of the
C bindings, includes the actual KeysInterface information itself.
It doesn't make sense to ever build a lightning node which doesn't
ever write ChannelMonitors to disk, so having a ChannelKeys object
which doesn't implement Writeable is nonsense.
Here we require Writeable for all ChannelKeys objects, simplifying
code generation for C bindings somewhat.
CommitmentTransaction maintains the per-commitment transaction fields needed to construct the associated bitcoin transactions (commitment, HTLC). It replaces passing around of Bitcoin transactions. The ChannelKeys API is modified accordingly.
By regenerating the transaction when implementing a validating external signer, this allows a higher level of assurance that all relevant aspects of the transactions were checked for policy violations.
ChannelTransactionParameters replaces passing around of individual per-channel fields that are needed to construct Bitcoin transactions.
Eliminate ChannelStaticData in favor of ChannelTransactionParameters.
Use counterparty txid instead of tx in channelmonitor update.
Like the previous commit for channel-closed monitor updates for
inbound channels during processing of a funding_created message,
this resolves a more general issue for closing outbound channels
which have sent a funding_created but not yet received a
funding_signed.
This issue was also detected by full_stack_target.
To make similar issues easier to detect in testing and fuzzing, an
additional assertion is added to panic on updates to a channel
monitor before registering it.
The ChannelMonitor already monitors the chain for counterparties
revealing preimages, and will give the HTLCSources back to the
ChannelManager for claiming. Thus it's unnecessary for the ChannelManager
to monitor these HTLCs itself.
See is_resolving_htlc_output:
- if the counterparty broadcasted and then claimed one of the HTLCs we
offered them, line 2015 is where the ChannelMonitor gives the ChannelManager
the HTLC source
- if we broadcasted and they claimed an HTLC we offered them, line 2025 is
where the ChannelMonitor gives the ChannelManager the HTLC source
This resolves a number of bugs around how we calculate feerates on
closing transactions:
* We previously calculated the weight wrong both by always
counting two outputs instead of counting the number of outputs
that actually exist in the closing transaction and by not
counting the witness redeemscript.
* We use assertions to check the calculated weight matches what we
actually build (with debug_assertions for variable-length sigs).
* As an additional sanity check, we really should check that the
transaction had at least min-relay-fee when we were the channel
initator.
Given the chain::Watch interface is defined in terms of ChannelMonitor
and ChannelMonitorUpdateErr, move channelmonitor.rs from the ln module
to the chain module.
Transaction data from a block may be filtered before it is passed to
block_connected functions, which may need the index of each transaction
within the block. Rather than define each function in terms of a slice
of tuples, define a type alias for the slice where it can be documented.
ChainListeners should be independent of each other, but in practice this
is not the case because ChainWatchInterface introduces a dependency
between them. Push ChainWatchInterface down into the ChainListener
implementations where needed. Update ChainListener's block_connected
method to take a slice of the form &[(usize, &Transaction)] where each
transaction is paired with its position within the block.
* Channel::get_counterparty_htlc_minimum_msat() returned
holder_htlc_minimum_msat, which was obviously incorrect.
* ChannelManager::get_channel_update set htlc_minimum_msat to
Channel::get_holder_htlc_minimum_msat(), but the spec explicitly
states we "MUST set htlc_minimum_msat to the minimum HTLC value
(in millisatoshi) that the channel peer will accept." This makes
sense because the reason we're rejecting the HTLC is because our
counterparty's HTLC minimum value is too small for us to send to
them, our own HTLC minimum value plays no role. Further, our
router already expects this - looking at the same directional
channel info as it does fees.
Finally, we add a test in the existing onion router test cases
which fails if either of the above is incorrect (the second issue
discovered in the process of writing the test).
Comment meaning of holder/counterparty
Diverse chan_utils cleanups
Cleanups post-cbindings merge
Fix misusage of holder_selected_contest_delay instead of counterparty
_selected_contest_delay in HolderCommitmentTransaction
Fix old payment_point comment
A TxCreationKeys set represents the key which will be embedded in output
scripts of a party's commitment tx state. Among them there is a always
a key belonging to counter-party, the HTLC pubkey. To dissociate
strongly, prefix keys with broadcaster/countersignatory.
A revocation keypair is attributed to the broadcaster as it's used
to punish a fraudulent broadcast while minding that such keypair
derivation method will be always used by countersignatory as it's
its task to enforce punishement thanks to the release secret.
To avoid reviewers confusion, rename counterparty_to_self_delay
to counteparty_selected_contest_delay, i.e the justice delay announced
by a channel counterparty restraining our transactions, and to_self_delay
to locally_selected_contest_delay, i.e the justice delay announced by us
restraining counterparty's transactions
We deviate from wider nomenclature by prefixing local data with a
locally_ extension due to the leak of this value in transactions/scripts
builder, where the confusion may happen.
Rename further AcceptChannelData to the new nomenclature.
Previously most of variable fields relative to data belonging to
our node or counterparty were labeled "local"/"remote". It has been
deemed confusing with regards to transaction construction which is
always done from a "local" viewpoint, even if owner is our counterparty
Variables should be named according to the script semantic which is
an invariant with regards to generating a local or remote commitment
transaction.
I.e a broadcaster_htlc_key will always guard a HTLC to the party able
to broadcast the computed transactions whereas countersignatory_htlc_key
will guard HTLC to a countersignatory of the commitment transaction.
The C bindings automatically create a _new() function for structs
which contain only pub fields which we know how to map. This
conflicts with the actual TxCreationKeys::new() function, so we
simply rename it to capture its nature as a derivation function.
