ChainHash is more appropriate for places where an arbitrary BlockHash is
not desirable. This type was introduced in later versions of the bitcoin
crate, thus BlockHash was used instead.
Using ChainHash also makes it easier to check if ChannelManager is
compatible with an Offer.
When reloading a node in the test framework, we end up with a new
`ChannelManager` that has references to various test util structs.
In order for the tests to compile reliably in the face of unrelated
changes, those test structs need to always be initialized before
both the new but also the original `ChannelManager`.
Here we make that change.
A channel's `short_channel_id` is currently only set when the funding
transaction is confirmed via `transactions_confirmed`, which might be
well after the channel initally becomes usable, e.g., in the 0conf case.
Previously we would panic due to a reachable `unwrap` when receiving a
counterparty's `announcement_signatures` message for a 0conf channel
pending confirmation on-chain.
Here we fix this bug by avoiding unsafe `unwrap`s and just erroring out
and ignoring the announcement_signatures message if the `short_channel_id`
hasn't been set yet.
This commit makes use of the added enum to calculate the dust
exposure threshold based on the current fee rate. This also updates
tests to ensure it works as intended.
This was a fairly old introduction to the spec to allow nodes to indicate
to their peers what chains they are interested in (i.e. will open channels
and gossip for).
We don't do any of the handling of this message in this commit and leave
that to the very next commit, so the behaviour is effectively the same
(ignore networks preference).
When we generated a `ChannelMonitorUpdate` during `ChannelManager`
deserialization, we must ensure that it gets processed before any
other `ChannelMonitorUpdate`s. The obvious hook for this is when
taking the `total_consistency_lock`, which makes it unlikely we'll
regress by forgetting this.
Here we add that call in the `PersistenceNotifierGuard`, with a
test-only atomic bool to test that this criteria is met.
PaymentParameters already includes this value.
This set us up to better support route blinding, since there is no known
final_cltv_delta when paying to a blinded route.
This moves the public payment sending API from passing an explicit
`PaymentSecret` to a new `RecipientOnionFields` struct (which
currently only contains the `PaymentSecret`). This gives us
substantial additional flexibility as we look at add both
`PaymentMetadata`, a new (well, year-or-two-old) BOLT11 invoice
extension to provide additional data sent to the recipient.
In the future, we should also add the ability to add custom TLV
entries in the `RecipientOnionFields` struct.
Currently, users don't have good way of being notified when channel open
negotiations have succeeded and new channels are pending confirmation on
chain. To this end, we add a new `ChannelPending` event that is emitted
when send or receive a `funding_signed` message, i.e., at the last
moment before waiting for the confirmation period.
We track whether the event had previously been emitted in `Channel` and
remove it from `internal_funding_created` entirely. Hence, we now
only emit the event after ChannelMonitorUpdate completion, or upon
channel reestablish. This mitigates a race condition where where we
wouldn't persist the event *and* wouldn't regenerate it on restart,
therefore potentially losing it, if async CMU wouldn't complete before
ChannelManager persistence.
This is largely motivated by some follow-up work for anchors that will
introduce an event handler for `BumpTransaction` events, which we can
now include in this new top-level `events` module.
The `get_err_msg!()` macro has no reason to be a macro so here we
move its logic to a function and leave the macro in place to avoid
touching every line of code in the tests.
This reduces the `--profile=test --lib` `Zpretty=expanded` code
size from 322,183 LoC to 321,985 LoC.
Long ago, we used the `no_connection_possible` to signal that a
peer has some unknown feature set or some other condition prevents
us from ever connecting to the given peer. In that case we'd
automatically force-close all channels with the given peer. This
was somewhat surprising to users so we removed the automatic
force-close, leaving the flag serving no LDK-internal purpose.
Distilling the concept of "can we connect to this peer again in the
future" to a simple flag turns out to be ripe with edge cases, so
users actually using the flag to force-close channels would likely
cause surprising behavior.
Thus, there's really not a lot of reason to keep the flag,
especially given its untested and likely to be broken in subtle
ways anyway.
When we process gossip messages asynchronously we may find that we
want to forward a gossip message to a peer after we've returned
from the existing `handle_*` method. In order to do so, we need to
be able to send arbitrary loose gossip messages back to the
`PeerManager` via `MessageSendEvent`.
This commit modifies `MessageSendEvent` in order to support this.
`PaymentParams` is all about the parameters for a payment, i.e. the
parameters which are static across all the paths of a paymet.
`RouteParameters` is about the information specific to a given
`Route` (i.e. a set of paths, among multiple potential sets of
paths for a payment). The CLTV delta thus doesn't belong in
`RouterParameters` but instead in `PaymentParameters`.
Worse, because `RouteParameters` is built from the information in
the last hops of a `Route`, when we deliberately inflate the CLTV
delta in path-finding, retries of the payment will have the final
CLTV delta double-inflated as it inflates starting from the final
CLTV delta used in the last attempt.
By moving the CLTV delta to `PaymentParameters` we avoid this
issue, leaving only the sought amount in the `RouteParameters`.
This is purely a refactor that does not change the InitFeatures
advertised by a ChannelManager. This allows users to configure which
features should be advertised based on the values of `UserConfig`. While
there aren't any existing features currently leveraging this behavior,
it will be used by the upcoming anchors_zero_fee_htlc_tx feature.
The UserConfig dependency on provided_init_features caused most
callsites of the main test methods responsible for opening channels to
be updated. This commit foregos that completely by no longer requiring
the InitFeatures of each side to be provided to these methods. The
methods already require a reference to each node's ChannelManager to
open the channel, so we use that same reference to obtain their
InitFeatures. A way to override such features was required for some
tests, so a new `override_init_features` config option now exists on
the test harness.
`cur_counterparty_commitment_transaction_number` starts at
`INITIAL_COMMITMENT_NUMBER`, gets decremented once when the initial
`channel_ready` message is received, and gets decremented a second
time when the first `revoke_and_ack` is received, revoking the
first counterparty commitment point.
At this point, `counterparty_prev_commitment_point` points to the
non-revoked second commitment point.
If we then process a second `channel_ready`, we check the
`cur_counterparty_commitment_transaction_number` number, see that
if is `INITIAL_COMMITMENT_NUMBER - 2` (i.e. not `- 1`) and assume
that the *second* commitment number has been revoked (by
`expect`ing `CounterpartyCommitmentSecrets::get_secret` with
`INITIAL_COMMITMENT_NUMBER - 1`). This `expect` panic's.
As the second commitment point has not yet been revoked, we should
fetch it from `counterparty_prev_commitment_point`, which we do
here, adding a test which failed on the previous code as well.
Found by the `full_stack_target` fuzzer.
In c986e52ce8, an `MppId` was added
to `HTLCSource` objects as a way of correlating HTLCs which belong
to the same payment when the `ChannelManager` sees an HTLC
succeed/fail. This allows it to have awareness of the state of all
HTLCs in a payment when it generates the ultimate user-facing
payment success/failure events. This was used in the same PR to
avoid generating duplicative success/failure events for a single
payment.
Because the field was only used as an internal token to correlate
HTLCs, and retries were not supported, it was generated randomly by
calling the `KeysInterface`'s 32-byte random-fetching function.
This also provided a backwards-compatibility story as the existing
HTLC randomization key was re-used for older clients.
In 28eea12bbe `MppId` was renamed to
the current `PaymentId` which was then used expose the
`retry_payment` interface, allowing users to send new HTLCs which
are considered a part of an existing payment.
At no point has the payment-sending API seriously considered
idempotency, a major drawback which leaves the API unsafe in most
deployments. Luckily, there is a simple solution - because the
`PaymentId` must be unique, and because payment information for a
given payment is held for several blocks after a payment
completes/fails, it represents an obvious idempotency token.
Here we simply require the user provide the `PaymentId` directly in
`send_payment`, allowing them to use whatever token they may
already have for a payment's idempotency token.
When a `chain::Watch` `ChannelMonitor` update method is called, the
user has three options:
(a) persist the monitor update immediately and return success,
(b) fail to persist the monitor update immediately and return
failure,
(c) return a flag indicating the monitor update is in progress and
will complete in the future.
(c) is rather harmless, and in some deployments should be expected
to be the return value for all monitor update calls, but currently
requires returning `Err(ChannelMonitorUpdateErr::TemporaryFailure)`
which isn't very descriptive and sounds scarier than it is.
Instead, here, we change the return type used to be a single enum
(rather than a Result) and rename `TemporaryFailure`
`UpdateInProgress`.
In the next commit we'll enforce counterparty `InitFeatures`
matching our required set in `ChannelManager`, implying they must
be set for many tests where they previously did not need to be (as
they were enforced in `PeerManager`, which is not used in
functional tests).
When we receive a block we always test if we should send our
channel_ready via `check_get_channel_ready`. If the channel in
question requires confirmations, we quickly return if the funding
transaction has not yet confirmed (or even been defined), however
for 0conf channels the checks are necessarily more involved.
In any case, we wish to panic if the funding transaction has
confirmations prior to when it should have been broadcasted. This
is useful as it is easy for users to violate our broadcast-time
invariants without noticing and the panic gives us an opportunity
to catch it.
Sadly, in the case of 0conf channels, if we hadn't yet seen the
funding transaction at all but receive a block we would hit this
sanity check as we don't check whether there are actually funding
transaction confirmations prior to panicing.
When we connect to a new peer, immediately send them any
channel_announcement and channel_update messages for any public
channels we have with other peers. This allows us to stop sending
those messages on a timer when they have not changed and ensures
we are sending messages when we have peers connected, rather than
broadcasting at startup when we have no peers connected.
