mirrors/raspiblitz
1
0
Fork 0
mirror of https://github.com/rootzoll/raspiblitz.git synced 2024-11-19 01:40:16 +01:00
Code Issues Packages Projects Releases Wiki Activity
d0dda72c55
raspiblitz/home.admin/00raspiblitz.sh

395 lines
14 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
#######################################
# SSH USER INTERFACE
# gets called when user logins per SSH
# or calls 'raspiblitz' on the terminal
#######################################
echo "Starting SSH user interface ... (please wait)"
# CONFIGFILE - configuration of RaspiBlitz
source /mnt/hdd/raspiblitz.conf 2>/dev/null
# INFOFILE - state data from bootstrap
infoFile="/home/admin/raspiblitz.info"
source ${infoFile}
source <(/home/admin/_cache.sh get state message)
# check that basic system phase/state information is available
if [ "${setupPhase}" == "" ] || [ "${state}" == "" ]; then
echo "setupPhase(${setupPhase}) state(${state})"
echo "FAIL: ${infoFile} does not exist or missing state."
echo "Check logs & bootstrap.service for errors and report to devs."
exit 1
fi
# special state: copysource
if [ "${state}" = "stop" ]; then
echo "OK ready for manual provision - run 'release' at the end."
exit
fi
# special state: copysource
if [ "${state}" = "copysource" ]; then
echo "***********************************************************"
echo "INFO: You lost connection during copying the blockchain"
echo "You have the following options:"
echo "a) continue/check progress with command: sourcemode"
echo "b) return to normal mode with command: restart"
echo "***********************************************************"
exit
fi
# special state: copytarget
source <(/home/admin/config.scripts/blitz.copychain.sh status)
if [ "${copyInProgress}" = "1" ]; then
echo "Detected interrupted COPY blochain process ..."
/home/admin/config.scripts/blitz.copychain.sh target
exit
fi
# special state: reindex was triggered
if [ "${state}" = "reindex" ]; then
echo "Re-Index in progress ... start monitoring:"
/home/admin/config.scripts/network.reindex.sh
exit
fi
# special state: copystation
if [ "${state}" = "copystation" ]; then
echo "Copy Station is Running ..."
echo "reboot to return to normal"
sudo /home/admin/XXcopyStation.sh
exit
fi
#####################################
# SSH MENU LOOP
# this loop runs until user exits or
# an error drops user to terminal
#####################################
# listen to CTRL-c & CTRL-z to break loop
quit() {
echo "SIGINT or SIGTERM received, exiting..."
kill -9 $$
}
trap quit INT
trap quit TERM
echo "# start ssh menu loop"
# put some values on higher scan rate for 10 minute
/home/admin/_cache.sh focus ln_default_ready 2 600 >/dev/null
/home/admin/_cache.sh focus ln_default_locked 2 600 >/dev/null
/home/admin/_cache.sh focus btc_default_synced 2 600 >/dev/null
echo "# starting ssh menu loop ... "
exitMenuLoop=0
doneIBD=0
while [ ${exitMenuLoop} -eq 0 ]
do
#####################################
# Access fresh system info on every loop
# refresh system state information
source <(/home/admin/_cache.sh get \
systemscan_runtime \
state \
setupPhase \
btc_default_synced \
ln_default_sync_chain \
ln_default_locked \
ln_default_ready \
ln_default_sync_initial_done \
message \
network \
chain \
lightning \
internet_localip \
system_vm_vagrant \
)
# background.scan is not ready yet
if [ "${systemscan_runtime}" == "" ]; then
echo "# background.scan not ready yet ... (please wait)"
sleep 4
continue
fi
#####################################
# ALWAYS: Handle System States
#####################################
############################
# Wallet Unlock
if [ "${state}" == "ready" ] && [ "${setupPhase}" == "done" ] && [ "${ln_default_locked}" == "1" ]; then
# unlock lnd
if [ "${lightning}" == "lnd" ]; then
/home/admin/config.scripts/lnd.unlock.sh
fi
# unlock c-lightning
if [ "${lightning}" == "cl" ]; then
/home/admin/config.scripts/cl.hsmtool.sh unlock
sleep 5
fi
fi
#####################################
# SETUP MENU
#####################################
# when is needed & bootstrap process signals that it waits for user dialog
if [ "${setupPhase}" != "done" ] && [ "${state}" == "waitsetup" ]; then
# push user to main menu
echo "# controlSetupDialog.sh"
/home/admin/setup.scripts/controlSetupDialog.sh
# use the exit code from setup menu as signal if menu loop should exited
# 0 = continue loop / everything else = break loop and exit to terminal
exitMenuLoop=$?
if [ "${exitMenuLoop}" != "0" ]; then break; fi
fi
#####################################
# SETUP DONE DIALOGS
#####################################
# when is needed & bootstrap process signals that it waits for user dialog
if [ "${setupPhase}" != "done" ] && [ "${state}" == "waitfinal" ]; then
# push to final setup gui dialogs
#echo "# controlFinalDialog.sh"
/home/admin/setup.scripts/controlFinalDialog.sh
# exit because controller will reboot at the end
exit 0
fi
# exit loop/script in case if system shutting down
if [ "${state}" == "reboot" ] || [ "${state}" == "shutdown" ]; then
dialog --pause " Prepare Reboot ..." 8 58 4
clear
echo "***********************************************************"
echo "RaspiBlitz going to ${state}"
echo "***********************************************************"
if [ "${state}" == "reboot" ]; then
echo "SSH again into system with:"
echo "ssh admin@${internet_localip}"
echo "Use your password A"
echo "***********************************************************"
fi
sleep 10
exit 0
fi
#####################################
# MAKE SURE BLOCKCHAIN/LN IS SYNC
#####################################
if [ "${setupPhase}" == "done" ] && [ "${state}" == "ready" ]; then
if [ "${lightning}" = "cl" ]; then
if [ "${btc_default_synced}" != "1" ] || [ "${ln_default_ready}" == "0" ] || [ "${ln_default_sync_chain}" == "0" ]; then
/home/admin/setup.scripts/eventBlockchainSync.sh ssh
sleep 3
continue
fi
else
if [ "${btc_default_synced}" != "1" ] || [ "${ln_default_ready}" == "0" ] || [ "${ln_default_sync_chain}" == "0" ] || [ "${ln_default_sync_initial_done}" == "0" ]; then
/home/admin/setup.scripts/eventBlockchainSync.sh ssh
sleep 3
continue
fi
fi
fi
#####################################
# SCB ACTIVATION
#####################################
# when setup is done & state is ready .. check for SCB activation
if [ "${setupPhase}" == "done" ] && [ "${state}" == "ready" ]; then
# check if there is a channel.backup to activate
gotSCB=$(ls /home/admin/channel.backup 2>/dev/null | grep -c 'channel.backup')
if [ "${gotSCB}" == "1" ]; then
clear
echo
echo "*** channel.backup Recovery ***"
echo "Running ... (please wait)"
lncli --chain=${network} restorechanbackup --multi_file=/home/admin/channel.backup 2>/home/admin/.error.tmp
error=`cat /home/admin/.error.tmp`
rm /home/admin/.error.tmp 2>/dev/null
if [ ${#error} -gt 0 ]; then
# output error message
echo ""
echo "!!! FAIL !!! SOMETHING WENT WRONG:"
echo "${error}"
# check if its possible to give background info on the error
notMachtingSeed=$(echo $error | grep -c 'unable to unpack chan backup')
if [ ${notMachtingSeed} -gt 0 ]; then
echo "--> ERROR BACKGROUND:"
echo "The WORD SEED is not matching the channel.backup file."
echo "Either there was an error in the word seed list or"
echo "or the channel.backup file is from another RaspiBlitz."
echo
fi
# basic info on error
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo "To try upload of channel.backup again:"
echo "MAINMENU > REPAIR > REPAIR-LND > RETRYSCB"
echo
echo "Press ENTER to continue for now ..."
rm /home/admin/channel.backup
read key
else
rm /home/admin/channel.backup
dialog --title " OK Static-Channel-Backup IMPORT " --msgbox "
LND accepted the channel.backup file you uploaded.
It can now take up to an hour until you can see,
if LND was able to recover funds from your channels.
If you dont see any pending on-chain incoming funds
within the next hour or you still missing funds, you
can always retry the upload again under:
MAINMENU > REPAIR > REPAIR-LND > RETRYSCB
" 14 58
fi
fi
fi
#####################################
# MAIN MENU or BLOCKCHAIN SYNC
#####################################
# when setup is done & state is ready .. jump to main menu
if [ "${setupPhase}" == "done" ] && [ "${state}" == "ready" ]; then
# MAIN MENU
# remove higher scan rate on values
/home/admin/_cache.sh focus ln_default_locked -1
/home/admin/_cache.sh focus btc_default_synced -1
echo "# 00mainMenu.sh"
/home/admin/00mainMenu.sh
# use the exit code from main menu as signal if menu loop should exited
# 0 = continue loop / everything else = break loop and exit to terminal
exitMenuLoop=$?
if [ "${exitMenuLoop}" != "0" ]; then break; fi
fi
#####################################
# DURING SETUP: Handle System States
#####################################
if [ "${setupPhase}" != "done" ]; then
#echo "# DURING SETUP: Handle System State (${state})"
# when no HDD on Vagrant - just print info & exit (admin info & exit)
if [ "${state}" == "noHDD" ] && [ ${system_vm_vagrant} != "0" ]; then
echo "***********************************************************"
echo "VAGRANT INFO"
echo "***********************************************************"
echo "To connect a HDD data disk to your VagrantVM:"
echo "- shutdown VM with command: off"
echo "- open your VirtualBox GUI and select RaspiBlitzVM"
echo "- change the 'mass storage' settings"
echo "- add a second 'Primary Slave' drive to the already existing controller"
echo "- close VirtualBox GUI and run: vagrant up & vagrant ssh"
echo "***********************************************************"
echo "You can either create a new dynamic VDI with around 900GB or download"
echo "a VDI with a presynced blockchain to speed up setup. If you dont have 900GB"
echo "space on your laptop you can store the VDI file on an external drive."
echo "***********************************************************"
exit 1
fi
# for all critical errors (admin info & exit)
if [ "${state}" == "error" ] || [ "${state}" == "errorHDD" ]; then
clear
echo "###########################################################"
echo "# /home/admin/raspiblitz.log"
cat /home/admin/raspiblitz.log
if [ "${state}" == "errorHDD" ]; then
# print some debug detail info on HDD/SSD error
echo "###########################################################"
echo "# blitz.datadrive.sh status"
sudo /home/admin/config.scripts/blitz.datadrive.sh status
fi
if [ "${message}" == "_provision.setup.sh fail" ]; then
echo "# /home/admin/raspiblitz.provision-setup.log"
cat /home/admin/raspiblitz.provision-setup.log
fi
echo "***********************************************************"
echo "ERROR - please report to development team"
echo "***********************************************************"
echo "state(${state}) message(${message})"
echo "https://github.com/rootzoll/raspiblitz#support"
echo "command to shutdown --> off"
exit 1
else
# every other state just push as event to SSH frontend
/home/admin/setup.scripts/eventInfoWait.sh "${state}" "${message}"
fi
fi
done
echo "# menu loop received exit code ${exitMenuLoop} --> exit to terminal"
echo
echo " -==@@@====@===-- --===@====@@@==- "
echo " -@@=====-----=-===@@=====@@=====-----=====@@- -==@- "
echo " -@@------==---------@@@@@=--------==------@@- --=@@@@= "
echo " @@=------======-----@@@-----======------=@@=@@===@@= "
echo " =@@=---------=======@@@=======-----===@@@==- =@@- "
echo " -=@@==@@=----------=@@@@@@@@@=----==@@@==-- -=@@- "
echo " -@@@=----=@@===--====@@@@@@@@@@@@@@@@=-- -=@@@@= "
echo " =@@=--------@@@@@@@@@@@@@@@@@@@@@=-- -@@=---=@@- "
echo " -@@=-------=@@@=====@@@@@@@@@@=-- =@@=-------@@@ "
echo " =@@=-------=@@====@@@@@@@@==- -=@@@@=--------=@@- "
echo " =@@---------@@==@@@@@@==- -=@@@=@@@---------=@@ "
echo " -@@=--------=@@@@@@=- -@@@@@@@@@@=---------=@@ "
echo " @@=-------@@@@@@@@@=- =@@@===@@@@=@@@@--------@@- "
echo " -@@=------@@====@@@=@@@=- -=@@@======@@====@@@-------=@@ "
echo " -@@------@@@====@@@====@@@=- =@@@======@@@=====@@=------=@@ "
echo " -@@------=@@====@@@@@=====@@@=- -=@@@=@@@@@@===@@@=------=@@ "
echo " -@@-------@@@=@@@@@@@@@@@@@@@=- -=@@@@@@@@=@@@=-------=@@ "
echo " @@=-------=@@@@@@@@@@@@@@@= -=@@@=@@@@=--------@@= "
echo " -@@--------=@@======@@@@- -=@@@@@@=--------=@@ "
echo " =@@--------@@@===@@@=- --=@@@@@@=@@@--------=@@- "
echo " =@@--------@@@@@@=- -==@@@@@=====@@@--------=@@- "
echo " =@@=-------@@@= -==@@@@@@@=====@@@@=--------=@@- "
echo " -@@=----=@@- -==@@@@@@@@@@@@@@@@@==---------=@@= "
echo " =@@==@@- -==@@@@@=========@@@@@=-----------=@@@- "
echo " -@@=- --=@@@==-=@@@@@@@@@@@@@=-------------=@@=- "
echo " -@@= --=@@@==----------=======-------------==@@@= "
echo " -@@=-==@==-=@@@===------------------------==@@@@= "
echo " =@@@@==- -==@@@@@======----======@@@@@=-- "
echo " =@@=-- --===@@@@@@@@@@@===-- "
echo
echo "***********************************"
echo "* RaspiBlitz Commandline"
echo "* Here be dragons .. have fun :)"
echo "***********************************"
if [ "${setupPhase}" == "done" ]; then
echo "Bitcoin command line options: ${network}-cli help"
if [ "${lightning}" == "lnd" ]; then
echo "LND command line options: lncli -h"
fi
if [ "${lightning}" == "cl" ]; then
echo "C-Lightning command line options: lightning-cli help"
fi
else
echo "Your setup is not finished."
echo "For setup logs: cat raspiblitz.log"
echo "or call the command 'debug' to see bigger report."
fi
echo "Blitz command line options: blitzhelp"
echo "Back to menus use command: raspiblitz"
echo
exit 0
Reference in New Issue View Git Blame Copy Permalink