mirror of
https://github.com/rootzoll/raspiblitz.git
synced 2025-02-24 14:51:03 +01:00
Merge branch 'master' of https://github.com/rootzoll/raspiblitz
This commit is contained in:
Christian Rotzoll
commit
c18394d331
6 changed files with 434 additions and 1061 deletions
5
FAQ.md
5
FAQ.md
|
|
@ -491,6 +491,11 @@ Work Nodes for the process of producing a new sd card image release:
|
|||
|
||||
There is an experimental section in this GitHub that tries to build for other SingleBoardComputers. Feel free to try it out and share your experience: [dietpi/README.md](dietpi/README.md)
|
||||
|
||||
## Can I flip the screen?
|
||||
|
||||
For the default 3.5" LCD you need to edit the /boot/config.txt. Run `sudo nano /boot/config.txt`
|
||||
look for the line `dtoverlay=tft35a:rotate=270` towards the end. To flip the screen with 180 degrees change the line to `dtoverlay=tft35a:rotate=90` and reboot with `sudo reboot`. Reference: https://github.com/goodtft/LCD-show/issues/34
|
||||
|
||||
## How to setup fresh/clean/reset and not getting into recovery mode?
|
||||
|
||||
When you put in a sd card with a new/clean RaspiBlitz image the RaspiBlitz will get into recovery mode because it detects the old data on your HDD and assumes you just want to continue to work with this data.
|
||||
|
|
|
|||
126
dietpi/Odroid_HC1_HC2.md
Normal file
126
dietpi/Odroid_HC1_HC2.md
Normal file
|
|
@ -0,0 +1,126 @@
|
|||
|
||||
# ⚡️ RaspiBlitz-on-DietPi ⚡️
|
||||
# For the Odroid HC1 / HC2 / XU3 / XU4
|
||||
|
||||
|
||||
|
||||
## There are 3 options provided:
|
||||
* a trusted fully prebuilt SDcard image
|
||||
* building your own SDcard from an updated DietPi image.
|
||||
* Build your own SDcard from the image downloaded from [Dietpi.com](dietpi.com#download)
|
||||
---
|
||||
### Download the fully prebuilt RaspiBlitz-on-DietPi SDcard image
|
||||
* [torrent](https://github.com/openoms/raspiblitz/blob/raspiblitz-dev/dietpi/RaspiBlitz1.0_OdroidHC1_DietPi6.21.1.torrent)
|
||||
* [mega.nz link](https://mega.nz/#F!EVNAAQiB!ZyLHP2dJMRSVjZOTCQMIYA)
|
||||
|
||||
sha256sum RaspiBlitz1.0_OdroidHC1_DietPi6.21.1.img: 96ee8700f52a12fb5b13fab3fffcdcf5d364c6dd16c580d969e421cef2cd7cc2
|
||||
|
||||
Steps to run:
|
||||
- download the .img file,
|
||||
- burn to a 16 GB SD with [Etcher](https://www.balena.io/etcher/)
|
||||
- extend the rootFS partition with a partition manager (disks, Gparted, etc.)
|
||||
- boot the Odroid with the SDcard
|
||||
- login with `ssh admin@at.your.raspiblitz.ip`
|
||||
password: `raspiblitz`
|
||||
|
||||
Using this image you can skip the rest of this guide as it is mostly about how this image was built.
|
||||
|
||||
The setup continues with the [RaspiBlitz Setup Process](https://github.com/rootzoll/raspiblitz/blob/master/README.md#setup-process-detailed-documentation)
|
||||
|
||||
---
|
||||
### Download the updated DietPi image
|
||||
|
||||
For the Odroid HC1 / HC2 / XU3 / XU4 a v6.20.6 DietPi image with fail2ban installed is uploaded [here](
|
||||
https://mega.nz/#!AcdVBAbR!O-W3jP5LUgw7lMY8S9XcBWcKX3IhRNAAFmaYzDXIUC0).
|
||||
sha256sum DietPi_v6.20.6_OdroidXU4-ARMv7-Stretch.img:
|
||||
1459b91f66b9db98f3437c31231e44497b7b7dcd9146d2cc41a3da653f9a9215
|
||||
|
||||
* Burn the image to the SDCard with [Etcher](https://www.balena.io/etcher/) and extend the rootfs partition to the size of your card with a partition manager (disks, Gparted, etc).
|
||||
|
||||
* Insert the SDcard into the Odroid.
|
||||
|
||||
* Power up and continue with [running the RaspiBlitz build_sdcard.sh script](#Run-the-RaspiBlitz-build_sdcard.sh-script)
|
||||
|
||||
---
|
||||
|
||||
### Build your own DietPi image:
|
||||
|
||||
Watch out this is an ardous process.
|
||||
Updating from a v6.14 DietPi image is causing a bootloop under some circumstances. Will be sorted once the current, >6.2 version is uploaded for the Odroids.
|
||||
|
||||
* For the Odroid HC1 / HC2 / XU3 / XU4 the start is this image:
|
||||
https://dietpi.com/downloads/images/DietPi_OdroidXU4-ARMv7-Stretch.7z
|
||||
* Burn it to the SD with [Etcher](https://www.balena.io/etcher/)
|
||||
|
||||
|
||||
* In the desktop terminal on Linux / MacOS or Putty on Windows:
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
password: `dietpi`
|
||||
Getting started with DietPi: https://dietpi.com/phpbb/viewtopic.php?f=8&t=9#p9
|
||||
|
||||
* Ok > Cancel > Cancel
|
||||
automatic apt update & apt upgrade and asks to reboot
|
||||
|
||||
|
||||
* Log back in:
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
password: `dietpi`
|
||||
* after the update the ssh keys might change:
|
||||
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
||||
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
|
||||
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
||||
run (can be copied from the terminal output):
|
||||
`ssh-keygen -f "/home/[your-linux-username]/.ssh/known_hosts" -R "dietpi.IP"`
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
yes >
|
||||
password: `dietpi`
|
||||
|
||||
* At this point if the DietPi OS was not updated from 6.14 it does not manage to save settings going forward.
|
||||
Exit the software installer (press Tab to jump to Exit)
|
||||
|
||||
|
||||
* in the bash prompt run:
|
||||
`dietpi-update`
|
||||
Ok > Cancel the recovery point
|
||||
update > Opt out of survey > Ok
|
||||
Reboots
|
||||
|
||||
* Log back in:
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
password: `dietpi`
|
||||
* In the DietPi software menu install fail2ban and make OpenSSH server the default SSH server.
|
||||
Ok > Cancel > Cancel
|
||||
Search `fail2ban` > Space to select > Enter
|
||||
SSH server > switch from Dropbear to the OpenSSH-server
|
||||
Install > Ok
|
||||
Opt out of survey > Ok
|
||||
Reboots again
|
||||
|
||||
* Log back in:
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
password: `dietpi`
|
||||
Changing the SSH server will change the SSH keys again. To clear:
|
||||
`ssh-keygen -f "/home/[your-linux-username]/.ssh/known_hosts" -R "dietpi.IP"`
|
||||
|
||||
|
||||
### Run the RaspiBlitz build_sdcard.sh script
|
||||
|
||||
* Format of the command to build the SDcard:
|
||||
`wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build_sdcard.sh && sudo bash build_sdcard.sh [BRANCH] [GITHUB-USERNAME]`
|
||||
If you are working from a forked repo be aware of that the fork needs to be called `raspiblitz` for the git downloads to work.
|
||||
|
||||
* Run the forked version of @openoms:
|
||||
`wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build_sdcard.sh && sudo bash build_sdcard.sh raspiblitz-dev openoms`
|
||||
This will take a couple minutes depending on your internet ceonnection and the processing power of the SBC.
|
||||
|
||||
* Restart when done and log back in now as `admin`:
|
||||
`ssh admin@[IP-OF-DROIDBLITZ]`
|
||||
password: `raspiblitz`
|
||||
|
||||
* From here he setup continues with the [RaspiBlitz Setup Process](https://github.com/rootzoll/raspiblitz/blob/master/README.md#setup-process-detailed-documentation)
|
||||
|
||||
---
|
||||
### Examples of copying the blockchain data from a HDD using a powered USB to SATA adapter
|
||||
|
||||
|
||||
|
||||
116
dietpi/README.md
116
dietpi/README.md
|
|
@ -1,4 +1,4 @@
|
|||
# ⚡️ RaspiBlitz on DietPi ⚡️
|
||||
# ⚡️ RaspiBlitz-on-DietPi ⚡️
|
||||
# A hardware agnostic platform
|
||||
|
||||
|
||||
|
|
@ -9,105 +9,69 @@ This guide was tested on:
|
|||
* Raspberry Pi 3 B Plus - no LCD support so far
|
||||
* hoping to extend this list with more compatible boards especially the ROCK64
|
||||
|
||||
See the hardware specs: [hardware specs](hw_comparison.md).
|
||||
See the [hardware comparison](hw_comparison.md).
|
||||
|
||||
---
|
||||
|
||||
|
||||
|
||||
### Downloads and walkthrough for the [Odroid HC1 / HC2 / XU3 / XU4](Odroid_HC1_HC2.md)
|
||||
---
|
||||
## General guide for the RaspiBlitz-on-DietPi
|
||||
|
||||
### Setting up the DietPi OS
|
||||
|
||||
## Setting up the DietPi OS
|
||||
Getting started with DietPi: https://dietpi.com/phpbb/viewtopic.php?f=8&t=9#p9
|
||||
|
||||
### Download the updated DietPi image
|
||||
* Start with an ARM based Single Board Computer listed on DietPi.com.
|
||||
At least 1GB RAM is recommended.
|
||||
Look for the SD card image for the specific SBC in the [download section](https://dietpi.com/#download).
|
||||
|
||||
For the Odroid HC1 / HC2 / XU3 / XU4 a v6.20.6 DietPi image with fail2ban installed is uploaded here:
|
||||
https://mega.nz/#!AcdVBAbR!O-W3jP5LUgw7lMY8S9XcBWcKX3IhRNAAFmaYzDXIUC0
|
||||
* Burn the image to the SDCard with [Etcher](https://www.balena.io/etcher/) and extend the rootfs partition to the size of your card with a partition manager.
|
||||
|
||||
Burn the SDCard with [Etcher](https://www.balena.io/etcher/) and extend the rootfs partition to the size of your card with a partition manager.
|
||||
* Insert the SDcard into your SBC.
|
||||
|
||||
Insert the SDcard into the Odroid.
|
||||
|
||||
Power up and continue with: [Run the DietPi optimized Raspiblitz SDcard build script](#Run-the-DietPi-optimized-Raspiblitz-SDcard-build-script)
|
||||
|
||||
### Build your own DietPi image:
|
||||
|
||||
For the Odroid HC1 / HC2 / XU3 / XU4 download this image:
|
||||
https://dietpi.com/downloads/images/DietPi_OdroidXU4-ARMv7-Stretch.7z
|
||||
and burn it to the SD with [Etcher](https://www.balena.io/etcher/)
|
||||
|
||||
Getting started with DietPi: https://dietpi.com/phpbb/viewtopic.php?f=8&t=9#p9
|
||||
|
||||
In the desktop terminal on Linux / MacOS or Putty on Windows:
|
||||
* Connect the HDD with a powered suitably powered adapter.
|
||||
A USB 2.0 port will not be able to power an HDD so you will need extra cable
|
||||
If you are connecting the HDD to a USB 3.0 port and have an at least 2A power supply, you might be able to run without an extra cable.
|
||||
|
||||
* Power up and log in with the desktop terminal on Linux / MacOS or Putty on Windows:
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
password: `dietpi`
|
||||
|
||||
Ok > Cancel > Cancel
|
||||
automatic apt update & apt upgrade and asks to reboot
|
||||
|
||||
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
after the previous update the ssh keys might change:
|
||||
* You might be asked about updating DietPi. This is not a straightforward process if starting from a version <6.20. Try to update, it is best to build on the latest version.
|
||||
|
||||
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
||||
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
|
||||
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
||||
|
||||
run (can be copied from the terminal output):
|
||||
* In the DietPi software menu install `fail2ban` and make `OpenSSH server` the default SSH server.
|
||||
Changing the SSH server will change the SSH keys again. To clear:
|
||||
`ssh-keygen -f "/home/[your-linux-username]/.ssh/known_hosts" -R "dietpi.IP"`
|
||||
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
yes >
|
||||
password: `dietpi`
|
||||
|
||||
At this point if the DietPi was not updated from 6.14 it does not manage to save settings going forward.
|
||||
Exit the sotware installer (press Tab to jump to Exit)
|
||||
|
||||
|
||||
in the bash prompt run:
|
||||
`dietpi-update`
|
||||
>Ok > Cancel the recovery point
|
||||
update > >Opt out of survey > Ok
|
||||
Reboots
|
||||
|
||||
* After every reboot log back in:
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
password: `dietpi`
|
||||
password: `dietpi`
|
||||
|
||||
>Ok > Cancel > Cancel
|
||||
Search `fail2ban` > Space to select > Enter
|
||||
> Install > Ok
|
||||
>Opt out of survey > Ok
|
||||
Reboots again
|
||||
|
||||
## Run the DietPi optimized Raspiblitz SDcard build script
|
||||
|
||||
In the desktop terminal in Linux / MacOS or Putty in Windows:
|
||||
|
||||
`ssh root@[IP-OF-DIETPI]`
|
||||
password: `dietpi`
|
||||
Should end up here on version v6.20.6 or higher:
|
||||
* Should end up here on version v6.20.6 or higher:
|
||||
|
||||
|
||||
run the SDcard build script in this format:
|
||||
`wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build_sdcard.sh && sudo bash build_sdcard.sh [BRANCH] [GITHUB-USERNAME]`
|
||||
|
||||
Be aware of that the fork needs to be called `raspiblitz` for the git download to work.
|
||||
if you intend to use @openoms`s forked version:
|
||||
### Run the RaspiBlitz build_sdcard.sh script
|
||||
|
||||
`wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build_sdcard.sh && sudo bash build_sdcard.sh raspiblitz-dev openoms`
|
||||
* Use this format to build the SDcard with the Raspiblitz script:
|
||||
`wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build_sdcard.sh && sudo bash build_sdcard.sh [BRANCH] [GITHUB-USERNAME]`
|
||||
If you are working from a forked repo be aware of that the fork needs to be called `raspiblitz` for the git downloads to work.
|
||||
|
||||
See my example output on the Odorid HC1: [HC1_sdcard_build_output](logs/HC1_sdcard_build_output)
|
||||
* Run the forked version of @openoms:
|
||||
`wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build_sdcard.sh && sudo bash build_sdcard.sh raspiblitz-dev openoms`
|
||||
This will take a couple minutes depending on your internet connection and the processing power of the SBC.
|
||||
|
||||
* Restart when done and log back in now as `admin`:
|
||||
`ssh admin@[IP-OF-DROIDBLITZ]`
|
||||
password: raspiblitz
|
||||
password: `raspiblitz`
|
||||
|
||||
### The setup continues as described in the RaspiBlitz setup [README.md](/README.md#documentation)
|
||||
* From here he setup continues with the [RaspiBlitz Setup Process](https://github.com/rootzoll/raspiblitz/blob/master/README.md#setup-process-detailed-documentation)
|
||||
|
||||
### Examples of copying the blockchain data from a HDD using a powered USB to SATA adapter
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
---
|
||||
### Useful commands for debugging:
|
||||
To test a new configuration run XXcleanHDD.sh and strictly restart
|
||||
(this makes _bootstrap.sh and 00mainMenu.sh run in the right order)
|
||||
|
|
@ -119,14 +83,13 @@ To test a new configuration run XXcleanHDD.sh and strictly restart
|
|||
`sudo tail -n100 /mnt/hdd/bitcoin/debug.log` - shows the last 100 lines
|
||||
`sudo systemctl status lnd`
|
||||
`sudo journalctl -f -u lnd`
|
||||
`./home/admin/XXdebugLogs.sh` - debug log collection on the raspiblitz
|
||||
`./home/admin/XXdebugLogs.sh` - debug log collection on the RaspiBlitz
|
||||
|
||||
---
|
||||
|
||||
Currently the DietPi update process has a bug causing bootloop if left alone. Will be sorted once the current, >6.2 version is uploaded as the starting image.
|
||||
|
||||
## Excerpts from the default dietpi.txt
|
||||
(https://github.com/Fourdee/DietPi/blob/master/dietpi.txt) to be used once the automatic install is feasible.
|
||||
## Excerpts from the default [dietpi.txt](https://github.com/Fourdee/DietPi/blob/master/dietpi.txt)
|
||||
to be used for a fully automatic SDcard building process.
|
||||
|
||||
### Automate installation with the dietpi.txt
|
||||
Need to copy to SDcard /boot/dietpi.txt after burning the image with Etcher.
|
||||
|
|
@ -158,3 +121,6 @@ Allows you to automatically execute a custom script at the end of DietPi install
|
|||
Option 1 = Copy your script to /boot/Automation_Custom_Script.sh and it will be executed automatically.
|
||||
Option 2 = Host your script online, then use AUTO_SETUP_CUSTOM_SCRIPT_EXEC=http://myweb.com/myscript.sh, it will be downloaded and executed automatically. | 0=disabled
|
||||
NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_script.log
|
||||
|
||||
### Guide to clone your SD-cards in Windows, MacOS and Linux and shrink the image in Linux:
|
||||
https://beebom.com/how-clone-raspberry-pi-sd-card-windows-linux-macos/
|
||||
262
dietpi/RaspiBlitz1.0_OdroidHC1_DietPi6.21.1.torrent
Normal file
262
dietpi/RaspiBlitz1.0_OdroidHC1_DietPi6.21.1.torrent
Normal file
File diff suppressed because one or more lines are too long
|
|
@ -1,986 +0,0 @@
|
|||
────────────────────────────────────────────────
|
||||
DietPi | Mon 04/02/19 - 10:02
|
||||
────────────────────────────────────────────────
|
||||
v6.20.6 | Odroid XU3/XU4/HC1/HC2 (armv7l)
|
||||
────────────────────────────────────────────────
|
||||
eth0 | 192.168.1.175
|
||||
────────────────────────────────────────────────
|
||||
DietPi Team : Daniel Knight (founder), MichaIng, K-Plan
|
||||
Image : DietPi Core Team (pre-image: Meveric)
|
||||
Web : https://DietPi.com | https://twitter.com/dietpi_
|
||||
Patreon Legends : PINE64 community
|
||||
Donate : https://DietPi.com/#donate
|
||||
DietPi Hosting : Powered by https://MyVirtualServer.com
|
||||
|
||||
dietpi-launcher = All the DietPi programs in one place.
|
||||
dietpi-config = Feature rich configuration tool for your device.
|
||||
dietpi-software = Select optimized software for installation.
|
||||
htop = Resource monitor.
|
||||
cpu = Shows CPU information and stats.
|
||||
|
||||
root@DietPi:~# wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh raspiblitz-dev openoms
|
||||
--2019-02-04 10:02:34-- https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh
|
||||
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133
|
||||
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 21481 (21K) [text/plain]
|
||||
Saving to: ‘raspbianStretchDesktop.sh’
|
||||
|
||||
raspbianStretchDesktop.sh 100%[====================================>] 20.98K --.-KB/s in 0.03s
|
||||
|
||||
2019-02-04 10:02:34 (649 KB/s) - ‘raspbianStretchDesktop.sh’ saved [21481/21481]
|
||||
|
||||
|
||||
*****************************************
|
||||
* RASPIBLITZ SD CARD IMAGE SETUP v0.99 *
|
||||
*****************************************
|
||||
|
||||
*** CHECK INPUT PARAMETERS ***
|
||||
will use code from branch --> 'raspiblitz-dev'
|
||||
*** CHECK INPUT PARAMETERS ***
|
||||
will use code from user --> 'openoms'
|
||||
|
||||
*** CHECK BASE IMAGE ***
|
||||
Check if Linux ARM based ...
|
||||
OK running on Linux ARM architecture.
|
||||
Detect Base Image ...
|
||||
OK running dietpi
|
||||
|
||||
*** FIXING LOCALES FOR BUILD ***
|
||||
Generating locales (this might take a while)...
|
||||
en_GB.UTF-8... done
|
||||
en_US.ISO-8859-1... done
|
||||
en_US.UTF-8... done
|
||||
Generation complete.
|
||||
|
||||
*** UPDATE DEBIAN ***
|
||||
Hit:1 http://fuzon.co.uk/meveric all InRelease
|
||||
Hit:2 http://fuzon.co.uk/meveric stretch InRelease
|
||||
Hit:3 https://oph.mdrjr.net/meveric all InRelease
|
||||
Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease
|
||||
Get:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease [91.0 kB]
|
||||
Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease
|
||||
Get:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease [91.8 kB]
|
||||
Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release
|
||||
Fetched 183 kB in 3s (58.9 kB/s)
|
||||
Reading package lists... Done
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
Calculating upgrade... Done
|
||||
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
|
||||
|
||||
*** PREPARE DietPi ***
|
||||
renaming dietpi user to pi
|
||||
The user `pi' is already a member of `sudo'.
|
||||
install pip
|
||||
Hit:1 http://fuzon.co.uk/meveric all InRelease
|
||||
Hit:2 http://fuzon.co.uk/meveric stretch InRelease
|
||||
Hit:3 https://oph.mdrjr.net/meveric all InRelease
|
||||
Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease
|
||||
Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease
|
||||
Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease
|
||||
Hit:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease
|
||||
Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release
|
||||
Reading package lists... Done
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following packages will be REMOVED:
|
||||
fail2ban
|
||||
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
|
||||
After this operation, 1,321 kB disk space will be freed.
|
||||
(Reading database ... 15499 files and directories currently installed.)
|
||||
Removing fail2ban (0.9.6-2) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following additional packages will be installed:
|
||||
binutils cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin libc6-dev libcc1-0
|
||||
libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 libperl5.24 libstdc++-6-dev
|
||||
libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils
|
||||
Suggested packages:
|
||||
binutils-doc cpp-doc gcc-6-locales debian-keyring gcc-6-doc libstdc++6-6-dbg gcc-multilib
|
||||
manpages-dev autoconf automake libtool flex bison gdb gcc-doc libgcc1-dbg libgomp1-dbg libitm1-dbg
|
||||
libatomic1-dbg libasan3-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx2-dbg
|
||||
libquadmath0-dbg glibc-doc libstdc++-6-doc make-doc ed diffutils-doc perl-doc
|
||||
libterm-readline-gnu-perl | libterm-readline-perl-perl
|
||||
Recommended packages:
|
||||
fakeroot libalgorithm-merge-perl manpages manpages-dev libfile-fcntllock-perl netbase rename
|
||||
The following NEW packages will be installed:
|
||||
binutils build-essential cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin
|
||||
libc6-dev libcc1-0 libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4
|
||||
libperl5.24 libstdc++-6-dev libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils
|
||||
0 upgraded, 30 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 36.8 MB of archives.
|
||||
After this operation, 138 MB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl-modules-5.24 all 5.24.1-3+deb9u5 [2,722 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgdbm3 armhf 1.8.3-14 [28.5 kB]
|
||||
Get:3 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf libperl5.24 armhf 5.24.1-3+deb9u5 [2,850 kB]
|
||||
Get:4 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl armhf 5.24.1-3+deb9u5 [219 kB]
|
||||
Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf xz-utils armhf 5.2.2-1.2+b1 [263 kB]
|
||||
Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf binutils armhf 2.28-5 [3,900 kB]
|
||||
Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc-dev-bin armhf 2.24-11+deb9u3 [253 kB]
|
||||
Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf linux-libc-dev armhf 4.9.130-2 [1,350 kB]
|
||||
Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc6-dev armhf 2.24-11+deb9u3 [1,995 kB]
|
||||
Get:10 https://cdn-aws.deb.debian.org/debian stretch/main armhf libisl15 armhf 0.18-1 [441 kB]
|
||||
Get:11 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpfr4 armhf 3.1.5-1 [536 kB]
|
||||
Get:12 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpc3 armhf 1.0.3-1+b2 [32.6 kB]
|
||||
Get:13 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp-6 armhf 6.3.0-18+deb9u1 [5,239 kB]
|
||||
Get:14 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp armhf 4:6.3.0-4 [18.7 kB]
|
||||
Get:15 https://cdn-aws.deb.debian.org/debian stretch/main armhf libcc1-0 armhf 6.3.0-18+deb9u1 [25.2 kB]
|
||||
Get:16 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgomp1 armhf 6.3.0-18+deb9u1 [64.6 kB]
|
||||
Get:17 https://cdn-aws.deb.debian.org/debian stretch/main armhf libatomic1 armhf 6.3.0-18+deb9u1 [6,010 B]
|
||||
Get:18 https://cdn-aws.deb.debian.org/debian stretch/main armhf libasan3 armhf 6.3.0-18+deb9u1 [284 kB]
|
||||
Get:19 https://cdn-aws.deb.debian.org/debian stretch/main armhf libubsan0 armhf 6.3.0-18+deb9u1 [92.9 kB]
|
||||
Get:20 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgcc-6-dev armhf 6.3.0-18+deb9u1 [531 kB]
|
||||
Get:21 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc-6 armhf 6.3.0-18+deb9u1 [5,511 kB]
|
||||
Get:22 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc armhf 4:6.3.0-4 [5,212 B]
|
||||
Get:23 https://cdn-aws.deb.debian.org/debian stretch/main armhf libstdc++-6-dev armhf 6.3.0-18+deb9u1 [1,487 kB]
|
||||
Get:24 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++-6 armhf 6.3.0-18+deb9u1 [5,665 kB]
|
||||
Get:25 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++ armhf 4:6.3.0-4 [1,520 B]
|
||||
Get:26 https://cdn-aws.deb.debian.org/debian stretch/main armhf make armhf 4.1-9.1 [290 kB]
|
||||
Get:27 https://cdn-aws.deb.debian.org/debian stretch/main armhf libdpkg-perl all 1.18.25 [1,287 kB]
|
||||
Get:28 https://cdn-aws.deb.debian.org/debian stretch/main armhf patch armhf 2.7.5-1+deb9u1 [106 kB]
|
||||
Get:29 https://cdn-aws.deb.debian.org/debian stretch/main armhf dpkg-dev all 1.18.25 [1,595 kB]
|
||||
Get:30 https://cdn-aws.deb.debian.org/debian stretch/main armhf build-essential armhf 12.3 [7,342 B]
|
||||
Fetched 36.8 MB in 6s (5,292 kB/s)
|
||||
Selecting previously unselected package perl-modules-5.24.
|
||||
(Reading database ... 15254 files and directories currently installed.)
|
||||
Preparing to unpack .../00-perl-modules-5.24_5.24.1-3+deb9u5_all.deb ...
|
||||
Unpacking perl-modules-5.24 (5.24.1-3+deb9u5) ...
|
||||
Selecting previously unselected package libgdbm3:armhf.
|
||||
Preparing to unpack .../01-libgdbm3_1.8.3-14_armhf.deb ...
|
||||
Unpacking libgdbm3:armhf (1.8.3-14) ...
|
||||
Selecting previously unselected package libperl5.24:armhf.
|
||||
Preparing to unpack .../02-libperl5.24_5.24.1-3+deb9u5_armhf.deb ...
|
||||
Unpacking libperl5.24:armhf (5.24.1-3+deb9u5) ...
|
||||
Selecting previously unselected package perl.
|
||||
Preparing to unpack .../03-perl_5.24.1-3+deb9u5_armhf.deb ...
|
||||
Unpacking perl (5.24.1-3+deb9u5) ...
|
||||
Selecting previously unselected package xz-utils.
|
||||
Preparing to unpack .../04-xz-utils_5.2.2-1.2+b1_armhf.deb ...
|
||||
Unpacking xz-utils (5.2.2-1.2+b1) ...
|
||||
Selecting previously unselected package binutils.
|
||||
Preparing to unpack .../05-binutils_2.28-5_armhf.deb ...
|
||||
Unpacking binutils (2.28-5) ...
|
||||
Selecting previously unselected package libc-dev-bin.
|
||||
Preparing to unpack .../06-libc-dev-bin_2.24-11+deb9u3_armhf.deb ...
|
||||
Unpacking libc-dev-bin (2.24-11+deb9u3) ...
|
||||
Selecting previously unselected package linux-libc-dev:armhf.
|
||||
Preparing to unpack .../07-linux-libc-dev_4.9.130-2_armhf.deb ...
|
||||
Unpacking linux-libc-dev:armhf (4.9.130-2) ...
|
||||
Selecting previously unselected package libc6-dev:armhf.
|
||||
Preparing to unpack .../08-libc6-dev_2.24-11+deb9u3_armhf.deb ...
|
||||
Unpacking libc6-dev:armhf (2.24-11+deb9u3) ...
|
||||
Selecting previously unselected package libisl15:armhf.
|
||||
Preparing to unpack .../09-libisl15_0.18-1_armhf.deb ...
|
||||
Unpacking libisl15:armhf (0.18-1) ...
|
||||
Selecting previously unselected package libmpfr4:armhf.
|
||||
Preparing to unpack .../10-libmpfr4_3.1.5-1_armhf.deb ...
|
||||
Unpacking libmpfr4:armhf (3.1.5-1) ...
|
||||
Selecting previously unselected package libmpc3:armhf.
|
||||
Preparing to unpack .../11-libmpc3_1.0.3-1+b2_armhf.deb ...
|
||||
Unpacking libmpc3:armhf (1.0.3-1+b2) ...
|
||||
Selecting previously unselected package cpp-6.
|
||||
Preparing to unpack .../12-cpp-6_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking cpp-6 (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package cpp.
|
||||
Preparing to unpack .../13-cpp_4%3a6.3.0-4_armhf.deb ...
|
||||
Unpacking cpp (4:6.3.0-4) ...
|
||||
Selecting previously unselected package libcc1-0:armhf.
|
||||
Preparing to unpack .../14-libcc1-0_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking libcc1-0:armhf (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package libgomp1:armhf.
|
||||
Preparing to unpack .../15-libgomp1_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking libgomp1:armhf (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package libatomic1:armhf.
|
||||
Preparing to unpack .../16-libatomic1_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking libatomic1:armhf (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package libasan3:armhf.
|
||||
Preparing to unpack .../17-libasan3_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking libasan3:armhf (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package libubsan0:armhf.
|
||||
Preparing to unpack .../18-libubsan0_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking libubsan0:armhf (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package libgcc-6-dev:armhf.
|
||||
Preparing to unpack .../19-libgcc-6-dev_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking libgcc-6-dev:armhf (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package gcc-6.
|
||||
Preparing to unpack .../20-gcc-6_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking gcc-6 (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package gcc.
|
||||
Preparing to unpack .../21-gcc_4%3a6.3.0-4_armhf.deb ...
|
||||
Unpacking gcc (4:6.3.0-4) ...
|
||||
Selecting previously unselected package libstdc++-6-dev:armhf.
|
||||
Preparing to unpack .../22-libstdc++-6-dev_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package g++-6.
|
||||
Preparing to unpack .../23-g++-6_6.3.0-18+deb9u1_armhf.deb ...
|
||||
Unpacking g++-6 (6.3.0-18+deb9u1) ...
|
||||
Selecting previously unselected package g++.
|
||||
Preparing to unpack .../24-g++_4%3a6.3.0-4_armhf.deb ...
|
||||
Unpacking g++ (4:6.3.0-4) ...
|
||||
Selecting previously unselected package make.
|
||||
Preparing to unpack .../25-make_4.1-9.1_armhf.deb ...
|
||||
Unpacking make (4.1-9.1) ...
|
||||
Selecting previously unselected package libdpkg-perl.
|
||||
Preparing to unpack .../26-libdpkg-perl_1.18.25_all.deb ...
|
||||
Unpacking libdpkg-perl (1.18.25) ...
|
||||
Selecting previously unselected package patch.
|
||||
Preparing to unpack .../27-patch_2.7.5-1+deb9u1_armhf.deb ...
|
||||
Unpacking patch (2.7.5-1+deb9u1) ...
|
||||
Selecting previously unselected package dpkg-dev.
|
||||
Preparing to unpack .../28-dpkg-dev_1.18.25_all.deb ...
|
||||
Unpacking dpkg-dev (1.18.25) ...
|
||||
Selecting previously unselected package build-essential.
|
||||
Preparing to unpack .../29-build-essential_12.3_armhf.deb ...
|
||||
Unpacking build-essential (12.3) ...
|
||||
Setting up libgomp1:armhf (6.3.0-18+deb9u1) ...
|
||||
Setting up libatomic1:armhf (6.3.0-18+deb9u1) ...
|
||||
Setting up perl-modules-5.24 (5.24.1-3+deb9u5) ...
|
||||
Setting up libgdbm3:armhf (1.8.3-14) ...
|
||||
Setting up libperl5.24:armhf (5.24.1-3+deb9u5) ...
|
||||
Setting up libcc1-0:armhf (6.3.0-18+deb9u1) ...
|
||||
Setting up make (4.1-9.1) ...
|
||||
Setting up libasan3:armhf (6.3.0-18+deb9u1) ...
|
||||
Setting up libubsan0:armhf (6.3.0-18+deb9u1) ...
|
||||
Setting up linux-libc-dev:armhf (4.9.130-2) ...
|
||||
Setting up perl (5.24.1-3+deb9u5) ...
|
||||
update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode
|
||||
Setting up libisl15:armhf (0.18-1) ...
|
||||
Setting up patch (2.7.5-1+deb9u1) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Setting up xz-utils (5.2.2-1.2+b1) ...
|
||||
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
|
||||
Setting up libmpfr4:armhf (3.1.5-1) ...
|
||||
Setting up libmpc3:armhf (1.0.3-1+b2) ...
|
||||
Setting up binutils (2.28-5) ...
|
||||
Setting up cpp-6 (6.3.0-18+deb9u1) ...
|
||||
Setting up libc-dev-bin (2.24-11+deb9u3) ...
|
||||
Setting up libc6-dev:armhf (2.24-11+deb9u3) ...
|
||||
Setting up cpp (4:6.3.0-4) ...
|
||||
Setting up libgcc-6-dev:armhf (6.3.0-18+deb9u1) ...
|
||||
Setting up libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ...
|
||||
Setting up libdpkg-perl (1.18.25) ...
|
||||
Setting up gcc-6 (6.3.0-18+deb9u1) ...
|
||||
Setting up g++-6 (6.3.0-18+deb9u1) ...
|
||||
Setting up dpkg-dev (1.18.25) ...
|
||||
Setting up gcc (4:6.3.0-4) ...
|
||||
Setting up g++ (4:6.3.0-4) ...
|
||||
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
|
||||
Setting up build-essential (12.3) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following additional packages will be installed:
|
||||
libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python python-minimal python-pip-whl
|
||||
python2.7 python2.7-minimal
|
||||
Suggested packages:
|
||||
python-doc python-tk python2.7-doc binfmt-support
|
||||
Recommended packages:
|
||||
python-all-dev python-setuptools python-wheel
|
||||
The following NEW packages will be installed:
|
||||
libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python python-minimal python-pip
|
||||
python-pip-whl python2.7 python2.7-minimal
|
||||
0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 5,470 kB of archives.
|
||||
After this operation, 17.2 MB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython2.7-minimal armhf 2.7.13-2+deb9u3 [389 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf python2.7-minimal armhf 2.7.13-2+deb9u3 [1,176 kB]
|
||||
Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-minimal armhf 2.7.13-2 [40.5 kB]
|
||||
Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython2.7-stdlib armhf 2.7.13-2+deb9u3 [1,821 kB]
|
||||
Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf python2.7 armhf 2.7.13-2+deb9u3 [285 kB]
|
||||
Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython-stdlib armhf 2.7.13-2 [20.0 kB]
|
||||
Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf python armhf 2.7.13-2 [154 kB]
|
||||
Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-pip-whl all 9.0.1-2 [1,406 kB]
|
||||
Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-pip all 9.0.1-2 [179 kB]
|
||||
Fetched 5,470 kB in 2s (2,280 kB/s)
|
||||
Selecting previously unselected package libpython2.7-minimal:armhf.
|
||||
(Reading database ... 20063 files and directories currently installed.)
|
||||
Preparing to unpack .../0-libpython2.7-minimal_2.7.13-2+deb9u3_armhf.deb ...
|
||||
Unpacking libpython2.7-minimal:armhf (2.7.13-2+deb9u3) ...
|
||||
Selecting previously unselected package python2.7-minimal.
|
||||
Preparing to unpack .../1-python2.7-minimal_2.7.13-2+deb9u3_armhf.deb ...
|
||||
Unpacking python2.7-minimal (2.7.13-2+deb9u3) ...
|
||||
Selecting previously unselected package python-minimal.
|
||||
Preparing to unpack .../2-python-minimal_2.7.13-2_armhf.deb ...
|
||||
Unpacking python-minimal (2.7.13-2) ...
|
||||
Selecting previously unselected package libpython2.7-stdlib:armhf.
|
||||
Preparing to unpack .../3-libpython2.7-stdlib_2.7.13-2+deb9u3_armhf.deb ...
|
||||
Unpacking libpython2.7-stdlib:armhf (2.7.13-2+deb9u3) ...
|
||||
Selecting previously unselected package python2.7.
|
||||
Preparing to unpack .../4-python2.7_2.7.13-2+deb9u3_armhf.deb ...
|
||||
Unpacking python2.7 (2.7.13-2+deb9u3) ...
|
||||
Selecting previously unselected package libpython-stdlib:armhf.
|
||||
Preparing to unpack .../5-libpython-stdlib_2.7.13-2_armhf.deb ...
|
||||
Unpacking libpython-stdlib:armhf (2.7.13-2) ...
|
||||
Setting up libpython2.7-minimal:armhf (2.7.13-2+deb9u3) ...
|
||||
Setting up python2.7-minimal (2.7.13-2+deb9u3) ...
|
||||
Linking and byte-compiling packages for runtime python2.7...
|
||||
Setting up python-minimal (2.7.13-2) ...
|
||||
Selecting previously unselected package python.
|
||||
(Reading database ... 20811 files and directories currently installed.)
|
||||
Preparing to unpack .../python_2.7.13-2_armhf.deb ...
|
||||
Unpacking python (2.7.13-2) ...
|
||||
Selecting previously unselected package python-pip-whl.
|
||||
Preparing to unpack .../python-pip-whl_9.0.1-2_all.deb ...
|
||||
Unpacking python-pip-whl (9.0.1-2) ...
|
||||
Selecting previously unselected package python-pip.
|
||||
Preparing to unpack .../python-pip_9.0.1-2_all.deb ...
|
||||
Unpacking python-pip (9.0.1-2) ...
|
||||
Setting up python-pip-whl (9.0.1-2) ...
|
||||
Processing triggers for mime-support (3.60) ...
|
||||
Setting up libpython2.7-stdlib:armhf (2.7.13-2+deb9u3) ...
|
||||
Setting up python2.7 (2.7.13-2+deb9u3) ...
|
||||
Setting up libpython-stdlib:armhf (2.7.13-2) ...
|
||||
Setting up python (2.7.13-2) ...
|
||||
Setting up python-pip (9.0.1-2) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
Suggested packages:
|
||||
openssh-client openssh-server
|
||||
The following NEW packages will be installed:
|
||||
rsync
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 380 kB of archives.
|
||||
After this operation, 573 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf rsync armhf 3.1.2-1+deb9u1 [380 kB]
|
||||
Fetched 380 kB in 0s (495 kB/s)
|
||||
Selecting previously unselected package rsync.
|
||||
(Reading database ... 21001 files and directories currently installed.)
|
||||
Preparing to unpack .../rsync_3.1.2-1+deb9u1_armhf.deb ...
|
||||
Unpacking rsync (3.1.2-1+deb9u1) ...
|
||||
Setting up rsync (3.1.2-1+deb9u1) ...
|
||||
Created symlink /etc/systemd/system/multi-user.target.wants/rsync.service → /lib/systemd/system/rsync.service.
|
||||
Processing triggers for systemd (232-25+deb9u8) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following NEW packages will be installed:
|
||||
net-tools
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 234 kB of archives.
|
||||
After this operation, 797 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf net-tools armhf 1.60+git20161116.90da8a0-1 [234 kB]
|
||||
Fetched 234 kB in 1s (205 kB/s)
|
||||
Selecting previously unselected package net-tools.
|
||||
(Reading database ... 21032 files and directories currently installed.)
|
||||
Preparing to unpack .../net-tools_1.60+git20161116.90da8a0-1_armhf.deb ...
|
||||
Unpacking net-tools (1.60+git20161116.90da8a0-1) ...
|
||||
Setting up net-tools (1.60+git20161116.90da8a0-1) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following NEW packages will be installed:
|
||||
xxd
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 131 kB of archives.
|
||||
After this operation, 166 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf xxd armhf 2:8.0.0197-4+deb9u1 [131 kB]
|
||||
Fetched 131 kB in 0s (167 kB/s)
|
||||
Selecting previously unselected package xxd.
|
||||
(Reading database ... 21088 files and directories currently installed.)
|
||||
Preparing to unpack .../xxd_2%3a8.0.0197-4+deb9u1_armhf.deb ...
|
||||
Unpacking xxd (2:8.0.0197-4+deb9u1) ...
|
||||
Setting up xxd (2:8.0.0197-4+deb9u1) ...
|
||||
Collecting setuptools
|
||||
Downloading https://files.pythonhosted.org/packages/82/9c/e812a9838feaf76cd9a960ca4ced3be7f2db31e473677a621d006e128db2/setuptools-40.7.3-py2.py3-none-any.whl (574kB)
|
||||
100% |████████████████████████████████| 583kB 695kB/s
|
||||
Installing collected packages: setuptools
|
||||
Successfully installed setuptools-40.7.3
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following additional packages will be installed:
|
||||
netcat-traditional
|
||||
The following NEW packages will be installed:
|
||||
netcat netcat-traditional
|
||||
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 74.7 kB of archives.
|
||||
After this operation, 164 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf netcat-traditional armhf 1.10-41+b1 [65.7 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf netcat all 1.10-41 [8,962 B]
|
||||
Fetched 74.7 kB in 1s (48.7 kB/s)
|
||||
Selecting previously unselected package netcat-traditional.
|
||||
(Reading database ... 21099 files and directories currently installed.)
|
||||
Preparing to unpack .../netcat-traditional_1.10-41+b1_armhf.deb ...
|
||||
Unpacking netcat-traditional (1.10-41+b1) ...
|
||||
Selecting previously unselected package netcat.
|
||||
Preparing to unpack .../netcat_1.10-41_all.deb ...
|
||||
Unpacking netcat (1.10-41) ...
|
||||
Setting up netcat-traditional (1.10-41+b1) ...
|
||||
update-alternatives: using /bin/nc.traditional to provide /bin/nc (nc) in auto mode
|
||||
Setting up netcat (1.10-41) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following additional packages will be installed:
|
||||
libbsd0 libedit2
|
||||
Suggested packages:
|
||||
keychain libpam-ssh monkeysphere ssh-askpass
|
||||
Recommended packages:
|
||||
xauth
|
||||
The following NEW packages will be installed:
|
||||
libbsd0 libedit2 openssh-client
|
||||
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 900 kB of archives.
|
||||
After this operation, 3,993 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libbsd0 armhf 0.8.3-1 [89.6 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libedit2 armhf 3.1-20160903-3 [69.9 kB]
|
||||
Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf openssh-client armhf 1:7.4p1-10+deb9u4 [740 kB]
|
||||
Fetched 900 kB in 1s (716 kB/s)
|
||||
Selecting previously unselected package libbsd0:armhf.
|
||||
(Reading database ... 21141 files and directories currently installed.)
|
||||
Preparing to unpack .../libbsd0_0.8.3-1_armhf.deb ...
|
||||
Unpacking libbsd0:armhf (0.8.3-1) ...
|
||||
Selecting previously unselected package libedit2:armhf.
|
||||
Preparing to unpack .../libedit2_3.1-20160903-3_armhf.deb ...
|
||||
Unpacking libedit2:armhf (3.1-20160903-3) ...
|
||||
Selecting previously unselected package openssh-client.
|
||||
Preparing to unpack .../openssh-client_1%3a7.4p1-10+deb9u4_armhf.deb ...
|
||||
Unpacking openssh-client (1:7.4p1-10+deb9u4) ...
|
||||
Setting up libbsd0:armhf (0.8.3-1) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Setting up libedit2:armhf (3.1-20160903-3) ...
|
||||
Setting up openssh-client (1:7.4p1-10+deb9u4) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following NEW packages will be installed:
|
||||
openssh-sftp-server
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 35.2 kB of archives.
|
||||
After this operation, 74.8 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf openssh-sftp-server armhf 1:7.4p1-10+deb9u4 [35.2 kB]
|
||||
Fetched 35.2 kB in 1s (35.2 kB/s)
|
||||
Selecting previously unselected package openssh-sftp-server.
|
||||
(Reading database ... 21211 files and directories currently installed.)
|
||||
Preparing to unpack .../openssh-sftp-server_1%3a7.4p1-10+deb9u4_armhf.deb ...
|
||||
Unpacking openssh-sftp-server (1:7.4p1-10+deb9u4) ...
|
||||
Setting up openssh-sftp-server (1:7.4p1-10+deb9u4) ...
|
||||
|
||||
*** CONFIG ***
|
||||
sudo: raspi-config: command not found
|
||||
bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory
|
||||
bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory
|
||||
bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory
|
||||
|
||||
*** SOFTWARE UPDATE ***
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
bash-completion is already the newest version (1:2.1-4.3).
|
||||
curl is already the newest version (7.52.1-5+deb9u8).
|
||||
htop is already the newest version (2.0.2-1).
|
||||
The following additional packages will be installed:
|
||||
dc git-man liberror-perl libjq1 libonig4
|
||||
Suggested packages:
|
||||
gettext-base git-daemon-run | git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb
|
||||
git-arch git-cvs git-mediawiki git-svn
|
||||
Recommended packages:
|
||||
less
|
||||
The following NEW packages will be installed:
|
||||
dc dphys-swapfile git git-man jq liberror-perl libjq1 libonig4
|
||||
0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 5,514 kB of archives.
|
||||
After this operation, 23.4 MB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf liberror-perl all 0.17024-1 [26.9 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf git-man all 1:2.11.0-3+deb9u4 [1,433 kB]
|
||||
Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf git armhf 1:2.11.0-3+deb9u4 [3,661 kB]
|
||||
Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf dc armhf 1.06.95-9+b3 [64.8 kB]
|
||||
Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf dphys-swapfile all 20100506-3 [19.7 kB]
|
||||
Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libonig4 armhf 6.1.3-2 [128 kB]
|
||||
Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libjq1 armhf 1.5+dfsg-1.3 [122 kB]
|
||||
Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf jq armhf 1.5+dfsg-1.3 [59.2 kB]
|
||||
Fetched 5,514 kB in 2s (2,743 kB/s)
|
||||
Selecting previously unselected package liberror-perl.
|
||||
(Reading database ... 21215 files and directories currently installed.)
|
||||
Preparing to unpack .../0-liberror-perl_0.17024-1_all.deb ...
|
||||
Unpacking liberror-perl (0.17024-1) ...
|
||||
Selecting previously unselected package git-man.
|
||||
Preparing to unpack .../1-git-man_1%3a2.11.0-3+deb9u4_all.deb ...
|
||||
Unpacking git-man (1:2.11.0-3+deb9u4) ...
|
||||
Selecting previously unselected package git.
|
||||
Preparing to unpack .../2-git_1%3a2.11.0-3+deb9u4_armhf.deb ...
|
||||
Unpacking git (1:2.11.0-3+deb9u4) ...
|
||||
Selecting previously unselected package dc.
|
||||
Preparing to unpack .../3-dc_1.06.95-9+b3_armhf.deb ...
|
||||
Unpacking dc (1.06.95-9+b3) ...
|
||||
Selecting previously unselected package dphys-swapfile.
|
||||
Preparing to unpack .../4-dphys-swapfile_20100506-3_all.deb ...
|
||||
Unpacking dphys-swapfile (20100506-3) ...
|
||||
Selecting previously unselected package libonig4:armhf.
|
||||
Preparing to unpack .../5-libonig4_6.1.3-2_armhf.deb ...
|
||||
Unpacking libonig4:armhf (6.1.3-2) ...
|
||||
Selecting previously unselected package libjq1:armhf.
|
||||
Preparing to unpack .../6-libjq1_1.5+dfsg-1.3_armhf.deb ...
|
||||
Unpacking libjq1:armhf (1.5+dfsg-1.3) ...
|
||||
Selecting previously unselected package jq.
|
||||
Preparing to unpack .../7-jq_1.5+dfsg-1.3_armhf.deb ...
|
||||
Unpacking jq (1.5+dfsg-1.3) ...
|
||||
Setting up git-man (1:2.11.0-3+deb9u4) ...
|
||||
Setting up liberror-perl (0.17024-1) ...
|
||||
Setting up libonig4:armhf (6.1.3-2) ...
|
||||
Setting up libjq1:armhf (1.5+dfsg-1.3) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Setting up dc (1.06.95-9+b3) ...
|
||||
Processing triggers for systemd (232-25+deb9u8) ...
|
||||
Setting up git (1:2.11.0-3+deb9u4) ...
|
||||
Setting up jq (1.5+dfsg-1.3) ...
|
||||
Setting up dphys-swapfile (20100506-3) ...
|
||||
Processing triggers for systemd (232-25+deb9u8) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
Suggested packages:
|
||||
vnstati
|
||||
The following NEW packages will be installed:
|
||||
vnstat
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 78.6 kB of archives.
|
||||
After this operation, 206 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf vnstat armhf 1.15-2 [78.6 kB]
|
||||
Fetched 78.6 kB in 1s (56.9 kB/s)
|
||||
Selecting previously unselected package vnstat.
|
||||
(Reading database ... 22140 files and directories currently installed.)
|
||||
Preparing to unpack .../vnstat_1.15-2_armhf.deb ...
|
||||
Unpacking vnstat (1.15-2) ...
|
||||
Setting up vnstat (1.15-2) ...
|
||||
Created symlink /etc/systemd/system/multi-user.target.wants/vnstat.service → /lib/systemd/system/vnstat.service.
|
||||
Processing triggers for systemd (232-25+deb9u8) ...
|
||||
|
||||
*** ADDING MAIN USER admin ***
|
||||
Adding user `admin' ...
|
||||
Adding new group `admin' (1001) ...
|
||||
Adding new user `admin' (1001) with group `admin' ...
|
||||
Creating home directory `/home/admin' ...
|
||||
Copying files from `/etc/skel' ...
|
||||
Adding user `admin' to group `sudo' ...
|
||||
Adding user admin to group sudo
|
||||
Done.
|
||||
%sudo ALL=(ALL) NOPASSWD:ALL
|
||||
*** ADDING SERVICE USER bitcoin
|
||||
Adding user `bitcoin' ...
|
||||
Adding new group `bitcoin' (1002) ...
|
||||
Adding new user `bitcoin' (1002) with group `bitcoin' ...
|
||||
Creating home directory `/home/bitcoin' ...
|
||||
Copying files from `/etc/skel' ...
|
||||
|
||||
*** SWAP FILE ***
|
||||
|
||||
*** INCREASE OPEN FILE LIMIT ***
|
||||
|
||||
*** BITCOIN ***
|
||||
--2019-02-04 10:05:05-- https://bitcoin.org/bin/bitcoin-core-0.17.0.1/bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz
|
||||
Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
|
||||
Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 24306145 (23M) [application/octet-stream]
|
||||
Saving to: ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’
|
||||
|
||||
bitcoin-0.17.0.1-arm-linu 100%[====================================>] 23.18M 202KB/s in 1m 59s
|
||||
|
||||
2019-02-04 10:07:04 (200 KB/s) - ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ saved [24306145/24306145]
|
||||
|
||||
--2019-02-04 10:07:05-- https://bitcoin.org/laanwj-releases.asc
|
||||
Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
|
||||
Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 17940 (18K) [application/octet-stream]
|
||||
Saving to: ‘laanwj-releases.asc’
|
||||
|
||||
laanwj-releases.asc 100%[====================================>] 17.52K --.-KB/s in 0.001s
|
||||
|
||||
2019-02-04 10:07:06 (19.1 MB/s) - ‘laanwj-releases.asc’ saved [17940/17940]
|
||||
|
||||
key 90C8019E36C2E964:
|
||||
25 signatures not checked due to missing keys
|
||||
gpg: /root/.gnupg/trustdb.gpg: trustdb created
|
||||
gpg: key 90C8019E36C2E964: public key "Wladimir J. van der Laan (Bitcoin Core binary release signing key) <laanwj@gmail.com>" imported
|
||||
gpg: Total number processed: 1
|
||||
gpg: imported: 1
|
||||
gpg: no ultimately trusted keys found
|
||||
--2019-02-04 10:07:07-- https://bitcoin.org/bin/bitcoin-core-0.17.0.1/SHA256SUMS.asc
|
||||
Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
|
||||
Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 1979 (1.9K) [application/octet-stream]
|
||||
Saving to: ‘SHA256SUMS.asc’
|
||||
|
||||
SHA256SUMS.asc 100%[====================================>] 1.93K --.-KB/s in 0.006s
|
||||
|
||||
2019-02-04 10:07:08 (303 KB/s) - ‘SHA256SUMS.asc’ saved [1979/1979]
|
||||
|
||||
goodSignature(1)
|
||||
correctKey(1)
|
||||
bitcoin-0.17.0/
|
||||
bitcoin-0.17.0/bin/
|
||||
bitcoin-0.17.0/bin/bitcoin-cli
|
||||
bitcoin-0.17.0/bin/bitcoind
|
||||
bitcoin-0.17.0/bin/bitcoin-qt
|
||||
bitcoin-0.17.0/bin/bitcoin-tx
|
||||
bitcoin-0.17.0/bin/test_bitcoin
|
||||
bitcoin-0.17.0/include/
|
||||
bitcoin-0.17.0/include/bitcoinconsensus.h
|
||||
bitcoin-0.17.0/lib/
|
||||
bitcoin-0.17.0/lib/libbitcoinconsensus.so
|
||||
bitcoin-0.17.0/lib/libbitcoinconsensus.so.0
|
||||
bitcoin-0.17.0/lib/libbitcoinconsensus.so.0.0.0
|
||||
bitcoin-0.17.0/share/
|
||||
bitcoin-0.17.0/share/man/
|
||||
bitcoin-0.17.0/share/man/man1/
|
||||
bitcoin-0.17.0/share/man/man1/bitcoin-cli.1
|
||||
bitcoin-0.17.0/share/man/man1/bitcoind.1
|
||||
bitcoin-0.17.0/share/man/man1/bitcoin-qt.1
|
||||
bitcoin-0.17.0/share/man/man1/bitcoin-tx.1
|
||||
|
||||
*** LITECOIN ***
|
||||
--2019-02-04 10:07:13-- https://download.litecoin.org/litecoin-0.16.3/linux/litecoin-0.16.3-arm-linux-gnueabihf.tar.gz
|
||||
Resolving download.litecoin.org (download.litecoin.org)... 104.27.4.55, 104.27.5.55
|
||||
Connecting to download.litecoin.org (download.litecoin.org)|104.27.4.55|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 9568024 (9.1M) [application/octet-stream]
|
||||
Saving to: ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’
|
||||
|
||||
litecoin-0.16.3-arm-linux 100%[====================================>] 9.12M 5.23MB/s in 1.7s
|
||||
|
||||
2019-02-04 10:07:15 (5.23 MB/s) - ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ saved [9568024/9568024]
|
||||
|
||||
litecoin-0.16.3/
|
||||
litecoin-0.16.3/bin/
|
||||
litecoin-0.16.3/bin/litecoin-cli
|
||||
litecoin-0.16.3/bin/litecoind
|
||||
litecoin-0.16.3/bin/litecoin-tx
|
||||
litecoin-0.16.3/bin/test_litecoin
|
||||
litecoin-0.16.3/share/
|
||||
litecoin-0.16.3/share/man/
|
||||
litecoin-0.16.3/share/man/man1/
|
||||
litecoin-0.16.3/share/man/man1/litecoin-cli.1
|
||||
litecoin-0.16.3/share/man/man1/litecoind.1
|
||||
litecoin-0.16.3/share/man/man1/litecoin-tx.1
|
||||
|
||||
*** LND ***
|
||||
--2019-02-04 10:07:16-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/lnd-linux-armv7-v0.5.1-beta.tar.gz
|
||||
Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4
|
||||
Connecting to github.com (github.com)|140.82.118.3|:443... connected.
|
||||
HTTP request sent, awaiting response... 302 Found
|
||||
Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100716Z&X-Amz-Expires=300&X-Amz-Signature=55bf712cd42a2425f68d2a08b5a05c37303ec6334d4cbdd0941b53304aa1fc8d&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream [following]
|
||||
--2019-02-04 10:07:16-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100716Z&X-Amz-Expires=300&X-Amz-Signature=55bf712cd42a2425f68d2a08b5a05c37303ec6334d4cbdd0941b53304aa1fc8d&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream
|
||||
Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.108.139
|
||||
Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.108.139|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 19198203 (18M) [application/octet-stream]
|
||||
Saving to: ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’
|
||||
|
||||
lnd-linux-armv7-v0.5.1-be 100%[====================================>] 18.31M 5.28MB/s in 4.9s
|
||||
|
||||
2019-02-04 10:07:22 (3.73 MB/s) - ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ saved [19198203/19198203]
|
||||
|
||||
--2019-02-04 10:07:22-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt
|
||||
Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3
|
||||
Connecting to github.com (github.com)|140.82.118.4|:443... connected.
|
||||
HTTP request sent, awaiting response... 302 Found
|
||||
Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100725Z&X-Amz-Expires=300&X-Amz-Signature=838d29594d525c1ab751e105b36d4e7838cfe37b2ee5c10e9ddd8582691beb58&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream [following]
|
||||
--2019-02-04 10:07:25-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100725Z&X-Amz-Expires=300&X-Amz-Signature=838d29594d525c1ab751e105b36d4e7838cfe37b2ee5c10e9ddd8582691beb58&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream
|
||||
Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.238.51
|
||||
Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.238.51|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 2026 (2.0K) [application/octet-stream]
|
||||
Saving to: ‘manifest-v0.5.1-beta.txt’
|
||||
|
||||
manifest-v0.5.1-beta.txt 100%[====================================>] 1.98K --.-KB/s in 0.002s
|
||||
|
||||
2019-02-04 10:07:26 (1007 KB/s) - ‘manifest-v0.5.1-beta.txt’ saved [2026/2026]
|
||||
|
||||
--2019-02-04 10:07:26-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt.sig
|
||||
Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4
|
||||
Connecting to github.com (github.com)|140.82.118.3|:443... connected.
|
||||
HTTP request sent, awaiting response... 302 Found
|
||||
Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100726Z&X-Amz-Expires=300&X-Amz-Signature=ce7ec6f0a9944f66f01b5cac9babfc21c8ffb52fb85b90a78b30a76115661da5&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream [following]
|
||||
--2019-02-04 10:07:26-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100726Z&X-Amz-Expires=300&X-Amz-Signature=ce7ec6f0a9944f66f01b5cac9babfc21c8ffb52fb85b90a78b30a76115661da5&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream
|
||||
Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.238.51
|
||||
Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.238.51|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 566 [application/octet-stream]
|
||||
Saving to: ‘manifest-v0.5.1-beta.txt.sig’
|
||||
|
||||
manifest-v0.5.1-beta.txt. 100%[====================================>] 566 --.-KB/s in 0.001s
|
||||
|
||||
2019-02-04 10:07:27 (935 KB/s) - ‘manifest-v0.5.1-beta.txt.sig’ saved [566/566]
|
||||
|
||||
--2019-02-04 10:07:27-- https://keybase.io/roasbeef/pgp_keys.asc
|
||||
Resolving keybase.io (keybase.io)... 52.55.1.130, 52.6.136.121
|
||||
Connecting to keybase.io (keybase.io)|52.55.1.130|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 6909 (6.7K) [text/plain]
|
||||
Saving to: ‘pgp_keys.asc’
|
||||
|
||||
pgp_keys.asc 100%[====================================>] 6.75K --.-KB/s in 0s
|
||||
|
||||
2019-02-04 10:07:28 (59.0 MB/s) - ‘pgp_keys.asc’ saved [6909/6909]
|
||||
|
||||
gpg: key 8B80CD2BB8BD8132: public key "Olaoluwa Osuntokun <laolu32@gmail.com>" imported
|
||||
gpg: Total number processed: 1
|
||||
gpg: imported: 1
|
||||
goodSignature(1)
|
||||
correctKey(1)
|
||||
*** Installing Go ***
|
||||
--2019-02-04 10:07:35-- https://storage.googleapis.com/golang/go1.11.linux-armv6l.tar.gz
|
||||
Resolving storage.googleapis.com (storage.googleapis.com)... 216.58.206.80, 2a00:1450:4009:809::2010
|
||||
Connecting to storage.googleapis.com (storage.googleapis.com)|216.58.206.80|:443... connected.
|
||||
HTTP request sent, awaiting response... 200 OK
|
||||
Length: 101718267 (97M) [application/octet-stream]
|
||||
Saving to: ‘go1.11.linux-armv6l.tar.gz’
|
||||
|
||||
go1.11.linux-armv6l.tar.g 100%[====================================>] 97.01M 8.63MB/s in 11s
|
||||
|
||||
2019-02-04 10:07:47 (8.86 MB/s) - ‘go1.11.linux-armv6l.tar.gz’ saved [101718267/101718267]
|
||||
|
||||
|
||||
|
||||
*** RASPIBLITZ EXTRAS ***
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
bc is already the newest version (1.06.95-9+b3).
|
||||
The following NEW packages will be installed:
|
||||
dialog
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 240 kB of archives.
|
||||
After this operation, 883 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf dialog armhf 1.3-20160828-2 [240 kB]
|
||||
Fetched 240 kB in 0s (248 kB/s)
|
||||
Selecting previously unselected package dialog.
|
||||
(Reading database ... 22155 files and directories currently installed.)
|
||||
Preparing to unpack .../dialog_1.3-20160828-2_armhf.deb ...
|
||||
Unpacking dialog (1.3-20160828-2) ...
|
||||
Setting up dialog (1.3-20160828-2) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following additional packages will be installed:
|
||||
fuse libfuse2
|
||||
Recommended packages:
|
||||
exfat-utils
|
||||
The following NEW packages will be installed:
|
||||
exfat-fuse fuse libfuse2
|
||||
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 214 kB of archives.
|
||||
After this operation, 426 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libfuse2 armhf 2.9.7-1+deb9u2 [116 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf fuse armhf 2.9.7-1+deb9u2 [70.3 kB]
|
||||
Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf exfat-fuse armhf 1.2.5-2 [27.6 kB]
|
||||
Fetched 214 kB in 1s (148 kB/s)
|
||||
Selecting previously unselected package libfuse2:armhf.
|
||||
(Reading database ... 22313 files and directories currently installed.)
|
||||
Preparing to unpack .../libfuse2_2.9.7-1+deb9u2_armhf.deb ...
|
||||
Unpacking libfuse2:armhf (2.9.7-1+deb9u2) ...
|
||||
Selecting previously unselected package fuse.
|
||||
Preparing to unpack .../fuse_2.9.7-1+deb9u2_armhf.deb ...
|
||||
Unpacking fuse (2.9.7-1+deb9u2) ...
|
||||
Selecting previously unselected package exfat-fuse.
|
||||
Preparing to unpack .../exfat-fuse_1.2.5-2_armhf.deb ...
|
||||
Unpacking exfat-fuse (1.2.5-2) ...
|
||||
Setting up libfuse2:armhf (2.9.7-1+deb9u2) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Setting up fuse (2.9.7-1+deb9u2) ...
|
||||
update-initramfs: deferring update (trigger activated)
|
||||
Setting up exfat-fuse (1.2.5-2) ...
|
||||
Processing triggers for initramfs-tools (0.130) ...
|
||||
ln: failed to create hard link '/boot/initrd.img-4.14.66+.dpkg-bak' => '/boot/initrd.img-4.14.66+': Operation not permitted
|
||||
update-initramfs: Generating /boot/initrd.img-4.14.66+
|
||||
Image Name: uInitrd
|
||||
Created: Mon Feb 4 10:08:42 2019
|
||||
Image Type: ARM Linux RAMDisk Image (uncompressed)
|
||||
Data Size: 5715880 Bytes = 5581.91 kB = 5.45 MB
|
||||
Load Address: 00000000
|
||||
Entry Point: 00000000
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following additional packages will be installed:
|
||||
libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-common
|
||||
Suggested packages:
|
||||
minissdpd natpmp-utils transmission-daemon transmission-gtk
|
||||
Recommended packages:
|
||||
minissdpd
|
||||
The following NEW packages will be installed:
|
||||
libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-cli transmission-common
|
||||
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 776 kB of archives.
|
||||
After this operation, 2,814 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libevent-2.0-5 armhf 2.0.21-stable-3 [134 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libminiupnpc10 armhf 1.9.20140610-4 [25.7 kB]
|
||||
Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf libnatpmp1 armhf 20110808-4+b1 [8,338 B]
|
||||
Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-common all 2.92-2+deb9u1 [288 kB]
|
||||
Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-cli armhf 2.92-2+deb9u1 [320 kB]
|
||||
Fetched 776 kB in 0s (823 kB/s)
|
||||
Selecting previously unselected package libevent-2.0-5:armhf.
|
||||
(Reading database ... 22348 files and directories currently installed.)
|
||||
Preparing to unpack .../libevent-2.0-5_2.0.21-stable-3_armhf.deb ...
|
||||
Unpacking libevent-2.0-5:armhf (2.0.21-stable-3) ...
|
||||
Selecting previously unselected package libminiupnpc10:armhf.
|
||||
Preparing to unpack .../libminiupnpc10_1.9.20140610-4_armhf.deb ...
|
||||
Unpacking libminiupnpc10:armhf (1.9.20140610-4) ...
|
||||
Selecting previously unselected package libnatpmp1:armhf.
|
||||
Preparing to unpack .../libnatpmp1_20110808-4+b1_armhf.deb ...
|
||||
Unpacking libnatpmp1:armhf (20110808-4+b1) ...
|
||||
Selecting previously unselected package transmission-common.
|
||||
Preparing to unpack .../transmission-common_2.92-2+deb9u1_all.deb ...
|
||||
Unpacking transmission-common (2.92-2+deb9u1) ...
|
||||
Selecting previously unselected package transmission-cli.
|
||||
Preparing to unpack .../transmission-cli_2.92-2+deb9u1_armhf.deb ...
|
||||
Unpacking transmission-cli (2.92-2+deb9u1) ...
|
||||
Setting up libminiupnpc10:armhf (1.9.20140610-4) ...
|
||||
Setting up libnatpmp1:armhf (20110808-4+b1) ...
|
||||
Setting up transmission-common (2.92-2+deb9u1) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Setting up libevent-2.0-5:armhf (2.0.21-stable-3) ...
|
||||
Setting up transmission-cli (2.92-2+deb9u1) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
The following additional packages will be installed:
|
||||
libtorrent19 libxmlrpc-core-c3
|
||||
Suggested packages:
|
||||
screen | dtach
|
||||
The following NEW packages will be installed:
|
||||
libtorrent19 libxmlrpc-core-c3 rtorrent
|
||||
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 891 kB of archives.
|
||||
After this operation, 2,281 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libxmlrpc-core-c3 armhf 1.33.14-4 [128 kB]
|
||||
Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libtorrent19 armhf 0.13.6-1.1 [345 kB]
|
||||
Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf rtorrent armhf 0.9.6-2+b1 [418 kB]
|
||||
Fetched 891 kB in 1s (630 kB/s)
|
||||
Selecting previously unselected package libxmlrpc-core-c3.
|
||||
(Reading database ... 22489 files and directories currently installed.)
|
||||
Preparing to unpack .../libxmlrpc-core-c3_1.33.14-4_armhf.deb ...
|
||||
Unpacking libxmlrpc-core-c3 (1.33.14-4) ...
|
||||
Selecting previously unselected package libtorrent19:armhf.
|
||||
Preparing to unpack .../libtorrent19_0.13.6-1.1_armhf.deb ...
|
||||
Unpacking libtorrent19:armhf (0.13.6-1.1) ...
|
||||
Selecting previously unselected package rtorrent.
|
||||
Preparing to unpack .../rtorrent_0.9.6-2+b1_armhf.deb ...
|
||||
Unpacking rtorrent (0.9.6-2+b1) ...
|
||||
Setting up libtorrent19:armhf (0.13.6-1.1) ...
|
||||
Setting up libxmlrpc-core-c3 (1.33.14-4) ...
|
||||
Setting up rtorrent (0.9.6-2+b1) ...
|
||||
Processing triggers for libc-bin (2.24-11+deb9u3) ...
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
Suggested packages:
|
||||
byobu | screenie | iselect ncurses-term
|
||||
The following NEW packages will be installed:
|
||||
screen
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 568 kB of archives.
|
||||
After this operation, 860 kB of additional disk space will be used.
|
||||
Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf screen armhf 4.5.0-6 [568 kB]
|
||||
Fetched 568 kB in 0s (677 kB/s)
|
||||
Selecting previously unselected package screen.
|
||||
(Reading database ... 22526 files and directories currently installed.)
|
||||
Preparing to unpack .../screen_4.5.0-6_armhf.deb ...
|
||||
Unpacking screen (4.5.0-6) ...
|
||||
Processing triggers for systemd (232-25+deb9u8) ...
|
||||
Setting up screen (4.5.0-6) ...
|
||||
Processing triggers for systemd (232-25+deb9u8) ...
|
||||
Cloning into 'raspiblitz'...
|
||||
remote: Enumerating objects: 61, done.
|
||||
remote: Counting objects: 100% (61/61), done.
|
||||
remote: Compressing objects: 100% (33/33), done.
|
||||
remote: Total 5134 (delta 32), reused 51 (delta 27), pack-reused 5073
|
||||
Receiving objects: 100% (5134/5134), 23.70 MiB | 5.49 MiB/s, done.
|
||||
Resolving deltas: 100% (3603/3603), done.
|
||||
cp: -r not specified; omitting directory '/home/admin/raspiblitz/home.admin/config.scripts'
|
||||
bash: /home/pi/.bashrc: No such file or directory
|
||||
bash: /home/pi/.bashrc: No such file or directory
|
||||
bash: /home/pi/.bashrc: No such file or directory
|
||||
bash: /home/pi/.bashrc: No such file or directory
|
||||
|
||||
*** HARDENING ***
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
Suggested packages:
|
||||
mailx system-log-daemon monit
|
||||
Recommended packages:
|
||||
iptables whois python3-pyinotify
|
||||
The following NEW packages will be installed:
|
||||
fail2ban
|
||||
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
|
||||
Need to get 0 B/288 kB of archives.
|
||||
After this operation, 1,321 kB of additional disk space will be used.
|
||||
Selecting previously unselected package fail2ban.
|
||||
(Reading database ... 22586 files and directories currently installed.)
|
||||
Preparing to unpack .../fail2ban_0.9.6-2_all.deb ...
|
||||
Unpacking fail2ban (0.9.6-2) ...
|
||||
Setting up fail2ban (0.9.6-2) ...
|
||||
Processing triggers for systemd (232-25+deb9u8) ...
|
||||
|
||||
*** RASPI BOOSTRAP SERVICE ***
|
||||
Created symlink /etc/systemd/system/multi-user.target.wants/bootstrap.service → /etc/systemd/system/bootstrap.service.
|
||||
|
||||
*** RASPI BACKGROUND SERVICE ***
|
||||
Created symlink /etc/systemd/system/multi-user.target.wants/background.service → /etc/systemd/system/background.service.
|
||||
*** Adding Tor Sources to sources.list ***
|
||||
deb http://deb.torproject.org/torproject.org stretch main
|
||||
deb-src http://deb.torproject.org/torproject.org stretch main
|
||||
OK
|
||||
|
||||
*** Installing dirmngr ***
|
||||
Reading package lists... Done
|
||||
Building dependency tree
|
||||
Reading state information... Done
|
||||
dirmngr is already the newest version (2.1.18-8~deb9u3).
|
||||
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
|
||||
|
||||
*** Fetching GPG key ***
|
||||
gpg: packet(13) too large
|
||||
gpg: read_block: read error: Invalid packet
|
||||
gpg: no valid OpenPGP data found.
|
||||
gpg: Total number processed: 0
|
||||
gpg: WARNING: nothing exported
|
||||
gpg: no valid OpenPGP data found.
|
||||
gpg: keyserver receive failed: No data
|
||||
gpg: WARNING: nothing exported
|
||||
gpg: no valid OpenPGP data found.
|
||||
!!!!!! Please check if the above really worked!
|
||||
|
||||
**********************************************
|
||||
ALMOST READY
|
||||
**********************************************
|
||||
|
||||
Your SD Card Image for RaspiBlitz is almost ready.
|
||||
Last step is to install LCD drivers. This will reboot your Pi when done.
|
||||
|
||||
Maybe take the chance and look thru the output above if you can spot any errror.
|
||||
|
||||
After final reboot - your SD Card Image is ready.
|
||||
|
||||
IMPORTANT IF WANT TO MAKE A RELEASE IMAGE FROM THIS BUILD:
|
||||
login once after reboot without HDD and run 'XXprepareRelease.sh'
|
||||
|
||||
Press ENTER to install LCD and reboot ...
|
||||
sudo: raspi-config: command not found
|
||||
E: Unable to locate package raspberrypi-bootloader
|
||||
E: No packages found
|
||||
Cloning into 'LCD-show'...
|
||||
remote: Enumerating objects: 8, done.
|
||||
remote: Counting objects: 100% (8/8), done.
|
||||
remote: Compressing objects: 100% (8/8), done.
|
||||
remote: Total 861 (delta 1), reused 0 (delta 0), pack-reused 853
|
||||
Receiving objects: 100% (861/861), 460.67 KiB | 0 bytes/s, done.
|
||||
Resolving deltas: 100% (548/548), done.
|
||||
cp: cannot create regular file '/boot/overlays/': Not a directory
|
||||
cp: cannot create regular file '/boot/overlays/tft35a.dtbo': No such file or directory
|
||||
cp: cannot create regular file '/usr/share/X11/xorg.conf.d/': Not a directory
|
||||
this is not raspberrypi kernel, no need to update touch configure, reboot
|
||||
Connection to 192.168.1.175 closed by remote host.
|
||||
Connection to 192.168.1.175 closed.
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 37 KiB |
Loading…
Add table
Reference in a new issue