diff --git a/DietPi/after_reboot_with_2nd_HDD.png b/DietPi/after_reboot_with_2nd_HDD.png deleted file mode 100644 index b4ea9713a..000000000 Binary files a/DietPi/after_reboot_with_2nd_HDD.png and /dev/null differ diff --git a/DietPi/build_sdcard_withfail2ban b/DietPi/build_sdcard_output similarity index 100% rename from DietPi/build_sdcard_withfail2ban rename to DietPi/build_sdcard_output diff --git a/DietPi/copyhdd-output b/DietPi/copyhdd-output deleted file mode 100644 index 85e9aebb3..000000000 --- a/DietPi/copyhdd-output +++ /dev/null @@ -1,110 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*** Check 1st HDD *** -OK - HDD as sda1 found - -*** Copy Blockchain form a second HDD *** - -WARNING: The RaspiBlitz cannot run 2 HDDs without extra Power! - -You can use a Y cable for the second HDD to inject extra power. -Like this one: https://www.amazon.de/dp/B00ZJBIHVY -If you see on LCD a error on connecting the 2nd HDD do a restart. - -You can use the HDD of another RaspiBlitz for this. -The 2nd HDD needs to be formated Ext4/exFAT and the folder 'bitcoin' is in root of HDD. - -********************************** ---> Please connect now the 2nd HDD -********************************** - -If 2nd HDD is connected but setup does not continue, -then cancel (CTRL+c) and reboot. -OK - 2nd HDD found - -*** Mounting 2nd HDD *** -try ext4 .. -OK - 2nd HDD mounted at /mnt/genesis - -*** Copy Blockchain *** -sudo: rsync: command not found -cleaning up - ok if files do not exists -rm: cannot remove '/mnt/hdd/bitcoin/bitcoin.conf': No such file or directory -rm: cannot remove '/mnt/hdd/bitcoin/bitcoin.pid': No such file or directory -rm: cannot remove '/mnt/hdd/bitcoin/testnet3/banlist.dat': No such file or directory -rm: cannot remove '/mnt/hdd/bitcoin/testnet3/debug.log': No such file or directory -rm: cannot remove '/mnt/hdd/bitcoin/testnet3/fee_estimates.dat': No such file or directory -rm: cannot remove '/mnt/hdd/bitcoin/testnet3/mempool.dat': No such file or directory -rm: cannot remove '/mnt/hdd/bitcoin/testnet3/peers.dat': No such file or directory -OK - Copy done :) - ----> You can now disconnect the 2nd HDD - -*** Checking HDD *** -OK - HDD is ready. - -*** Prepare bitcoin *** -OK - bitcoin setup ready - -*** Start bitcoin *** -This can take a while .. - - - - - - diff --git a/DietPi/initial_setup_output.html b/DietPi/initial_setup_output.html deleted file mode 100644 index 3c8e80583..000000000 --- a/DietPi/initial_setup_output.html +++ /dev/null @@ -1,355 +0,0 @@ -RaspiBlitz -────────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - ┌──────────────────────────────────────────────────┐ - │ OK - RPC password changed │ - │ │ - │ Now starting the Setup of your RaspiBlitz. │ - ├──────────────────────────────────────────────────┤ - │ < OK > │ - └──────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - -HDD was already initialized/prepared -Now needs to be mounted - -*** Adding HDD to the System *** -started from state(waitsetup) -OK - HDD found as sda - -*** Check HDD *** -OK - HDD is formatted with ext4 and is named BLOCKCHAIN -Adding line to /etc/fstab ... -UUID=9f95b7b3-d634-4938-9f05-dfab3d662507 /mnt/hdd ext4 noexec,defaults 0 0 -OK - HDD is listed in /etc/fstab - -*** Mount HDD *** -mkdir: cannot create directory ‘/mnt/hdd’: File exists -OK - HDD is mounted - -moving SSH pub keys to HDD -cp: cannot stat '/etc/ssh': No such file or directory -OK - -*** Analysing HDD Content *** -Looks like the HDD is prepared with the Blockchain. -Continuing with finishing the system setup ... - -*** Checking HDD *** -OK - HDD is ready. - -*** Prepare bitcoin *** -OK - bitcoin setup ready - -*** Start bitcoin *** -This can take a while .. -Created symlink /etc/systemd/system/multi-user.target.wants/bitcoind.service → /etc/systemd/system/bitcoind.service. -Started ... wait 10 secs -checking setup script -network(bitcoin) -chain(main) -setupStep(60) - - - - - - - - - - - - - - - - ┌────────────────────────────────────────────────────────┐ - │ Double checking for bitcoind - please wait .. │ - │ ┌──────────────────────────────────────────────────┐ │ - │ │ 120 │ │ - │ └──────────────────────────────────────────────────┘ │ - ├────────────────────────────────────────────────────────┤ - │ < OK > │ - └────────────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────────────────────────────────────────┐ - │ Double checking for bitcoind - please wait .. │ - │ ┌──────────────────────────────────────────────────┐ │ - │ │ 0 │ │ - │ └──────────────────────────────────────────────────┘ │ - ├────────────────────────────────────────────────────────┤ - │ < OK > │ - └────────────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - -OK - bitcoind is running -Next step run Lightning - -*** Checking bitcoin *** -OK - bitcoind is running - -*** Wait until bitcoind is ready ... -OK - chainnetwork is working - -*** LND Config *** -OK - LND config written - -*** Starting LND *** -Created symlink /etc/systemd/system/multi-user.target.wants/lnd.service → /etc/systemd/system/lnd.service. - - - - - - - - - - - - - - - - - ┌────────────────────────────────────────────────────────┐ - │ Starting LND - please wait .. │ - │ ┌──────────────────────────────────────────────────┐ │ - │ │ 98 │ │ - │ └─────────────────────────1─────────── ──────────┘ │ - ├────────────────────────────────────────────────────────┤ - │ < OK > │ - └────────────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────────────────────────────────────────┐ - │ Starting LND - please wait .. │ - │ ┌──────────────────────────────────────────────────┐ │ - │ │ 81 │ │ - │ └──────────────────────────────────────────────────┘ │ - ├────────────────────────────────────────────────────────┤ - │ < OK > │ - └────────────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────────────────────────────────────────┐ - │ Starting LND - please wait .. │ - │ ┌──────────────────────────────────────────────────┐ │ - │ │ 0 │ │ - │ └──────────────────────────────────────────────────┘ │ - ├────────────────────────────────────────────────────────┤ - │ < OK > │ - └────────────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - -Failed to connect to bus: No such file or directory -1548603516 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem -Failed to connect to bus: No such file or directory -1548603577 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem -Failed to connect to bus: No such file or directory -1548603637 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem -Failed to connect to bus: No such file or directory -1548603697 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem -Failed to connect to bus: No such file or directory -1548603757 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem -Failed to connect to bus: No such file or directory -1548603817 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem - diff --git a/DietPi/initial_setup_output_after1st_reboot b/DietPi/initial_setup_output_after1st_reboot deleted file mode 100644 index 899d404e2..000000000 --- a/DietPi/initial_setup_output_after1st_reboot +++ /dev/null @@ -1,926 +0,0 @@ - ──────────────────────────────────────────────── - DietPi | Sun 27/01/19 - 10:45 - ──────────────────────────────────────────────── - v6.19.7 | Odroid XU3/XU4/HC1/HC2 (armv7l) - ──────────────────────────────────────────────── - eth0 | 192.168.1.175 - ──────────────────────────────────────────────── - DietPi Team : Daniel Knight (founder), MichaIng, K-Plan - Image : DietPi Core Team (pre-image: Meveric) - Web : https://DietPi.com | https://twitter.com/dietpi_ - Patreon Legends : PINE64 community - Donate : https://DietPi.com/#donate - DietPi Hosting : Powered by https://MyVirtualServer.com - - dietpi-launcher = All the DietPi programs in one place. - dietpi-config = Feature rich configuration tool for your device. - dietpi-software = Select optimized software for installation. - htop = Resource monitor. - cpu = Shows CPU information and stats. - -Starting the main menu ... -ls: cannot access '/mnt/hdd/raspiblitz.conf': No such file or directory -setup still in progress - setupStep(60) -checking bitcoind - please wait .. -can take longer if device was off or first time - - RaspiBlitz 192.168.1.175 - Welcome - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌──────────────────────────────────────┐ - │ Waiting for bitcoind to get ready. │ - │ ---> Verifying blocks... │ - │ Can take longer if device was off. │ - └──────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - - - RaspiBlitz 192.168.1.175 - Welcome - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌──────────────────────────────────────┐ - │ Waiting for bitcoind to get ready. │ - │ ---> Verifying blocks... │ - │ Can take longer if device was off. │ - └──────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - - - RaspiBlitz 192.168.1.175 - Welcome - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌──────────────────────────────────────┐ - │ Waiting for bitcoind to get ready. │ - │ ---> Verifying blocks... │ - │ Can take longer if device was off. │ - └──────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - - - RaspiBlitz 192.168.1.175 - Welcome - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌──────────────────────────────────────┐ - │ Waiting for bitcoind to get ready. │ - │ ---> Verifying blocks... │ - │ Can take longer if device was off. │ - └──────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - - - RaspiBlitz 192.168.1.175 - Welcome - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌──────────────────────────────────────┐ - │ Waiting for bitcoind to get ready. │ - │ ---> Verifying blocks... │ - │ Can take longer if device was off. │ - └──────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - - RaspiBlitz () - ──────────────────────────────────────────────────────────────────────────────────────────────────── - - - - - - - - - - - - - - - - - - - - - - - ┌────────────────────── / ────────────────────────┐ - │ Lightning Filtering Blockchain │ - │ Progress: ?/ │ - │ Please wait - this can take some long time. │ - │ Its OK to close terminal and ssh back in later. │ - └───────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -./80scanLND.sh: line 1: /mnt/hdd/raspiblitz.conf: No such file or directory -usage: sudo -h | -K | -k | -V -usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user] -usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command] -usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] - [VAR=value] [-i|-s] [] -usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p prompt] [-u user] file - ... -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory -(standard_in) 1: syntax error -tail: cannot open '/mnt/hdd/lnd/logs//net/lnd.log' for reading: No such file or directory - diff --git a/DietPi/install.md b/DietPi/install.md deleted file mode 100644 index 3962ed26e..000000000 --- a/DietPi/install.md +++ /dev/null @@ -1,79 +0,0 @@ -Working with the ODroid HC1 and this image: https://dietpi.com/downloads/images/DietPi_OdroidXU4-ARMv7-Stretch.7z - -Getting started with DietPi: https://dietpi.com/phpbb/viewtopic.php?f=8&t=9#p9 - -Login to DietPi -username = root -password = dietpi -DietPi also comes pre-installed with Dropbear SSH Server. - -`ssh root@[IP-OF-DIETPI]` -password: `dietpi` -Ok > Cancel > Cancel -automatic apt update & apt upgrade on first logon and reboots -Opt out of survey > Ok > Ok - -`ssh root@[IP-OF-DIETPI]` - -@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ -@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ -@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ - -run (copy from the terminal output): `ssh-keygen -f "/home/buidl/.ssh/known_hosts" -R "dietpi.IP"` - -`ssh root@[IP-OF-DIETPI]` -Ok > Install fail2ban > Install > Ok -Reboots again - -`ssh root@[IP-OF-DIETPI]` -Now only the bash prompt opens - -sudo apt install -y rsync (now added to the script) - -use: wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh [BRANCH] [GITHUB-USERNAME] - -`wget https://raw.githubusercontent.com/openoms/HardwareNode/OdroidHC1Debug/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh OdroidHC1Debug openoms` - -password: raspiblitz - -see my output: [sdcard_build_output](sdcard_build_output.html) -The only fault appears to be with `fail2ban` -(this is solved if fail2ban is intalled from the DietPi software settings during the second boot) - -`ssh admin@[IP-OF-DROIDBLITZ]` -password: raspiblitz - -The raspiblitz GUI and setup worked until it needed to get the blockchain data. - -First attempted to connect the HDD of a RaspiBlitz with a powered USB to SATA adapter to the ODorid. -The ODroid did not mount the 2nd HDD properly: -it appeared as `sdb` and as `sda` after reboot: -![](after_reboot_with_2nd_HDD.png) - -So instead just copied the blockchain manually on my main computer to the root /bitcoin folder. Reinserted the HDD to the ODroid and booted up - - -`ssh admin@[IP-OF-DROIDBLITZ] -`./60finishHDD.sh` - -alternatively can edit the 50copyHDD.sh -`sudo nano 50copyHDD.sh` -change the 3 instances of `sdb1` to `sdb` - - -got this output here: [initial_setup_output](initial_setup_output.html) -and the same when tried again with a rebuilt sdcard. - -Stuck here now (counting up linux time): -``` -Failed to connect to bus: No such file or directory -1548604569 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem -Failed to connect to bus: No such file or directory -1548604629 -LND not ready yet ... waiting another 60 seconds. -If this takes too long (more then 10min total) --> CTRL+c and report Problem - -``` - diff --git a/DietPi/sdcard_build_output.html b/DietPi/sdcard_build_output.html deleted file mode 100644 index 47b854227..000000000 --- a/DietPi/sdcard_build_output.html +++ /dev/null @@ -1,1054 +0,0 @@ -──────────────────────────────────────────────── -DietPi | Sun 27/01/19 - 15:15 -──────────────────────────────────────────────── -v6.19.7 | Odroid XU3/XU4/HC1/HC2 (armv7l) -──────────────────────────────────────────────── -eth0 | 192.168.1.175 -──────────────────────────────────────────────── -DietPi Team : Daniel Knight (founder), MichaIng, K-Plan -Image : DietPi Core Team (pre-image: Meveric) -Web : https://DietPi.com | https://twitter.com/dietpi_ -Patreon Legends : PINE64 community -Donate : https://DietPi.com/#donate -DietPi Hosting : Powered by https://MyVirtualServer.com - -dietpi-launcher = All the DietPi programs in one place. -dietpi-config = Feature rich configuration tool for your device. -dietpi-software = Select optimized software for installation. -htop = Resource monitor. -cpu = Shows CPU information and stats. - -pi@DietPi:~$ wget https://raw.githubusercontent.com/openoms/HardwareNode/OdroidHC1Debug/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh OdroidHC1Debug openoms ---2019-01-27 15:15:30-- https://raw.githubusercontent.com/openoms/HardwareNode/OdroidHC1Debug/build.sdcard/raspbianStretchDesktop.sh -Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133 -Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 21138 (21K) [text/plain] -Saving to: ‘raspbianStretchDesktop.sh’ - -raspbianStretchDesktop.sh 100%[===================================>] 20.64K --.-KB/s in 0.04s - -2019-01-27 15:15:31 (581 KB/s) - ‘raspbianStretchDesktop.sh’ saved [21138/21138] - - -We trust you have received the usual lecture from the local System -Administrator. It usually boils down to these three things: - - #1) Respect the privacy of others. - #2) Think before you type. - #3) With great power comes great responsibility. - -[sudo] password for pi: - -***************************************** -* RASPIBLITZ SD CARD IMAGE SETUP v0.99 * -***************************************** - -*** CHECK INPUT PARAMETERS *** -will use code from branch --> 'OdroidHC1Debug' -*** CHECK INPUT PARAMETERS *** -will use code from user --> 'openoms' - -*** CHECK BASE IMAGE *** -Check if Linux ARM based ... -OK running on Linux ARM architecture. -Detect Base Image ... -OK running dietpi - -*** FIXING LOCALES FOR BUILD *** -Generating locales (this might take a while)... - en_GB.UTF-8... done - en_US.ISO-8859-1... done - en_US.UTF-8... done -Generation complete. - -*** UPDATE DEBIAN *** -Hit:1 http://fuzon.co.uk/meveric all InRelease -Hit:2 http://fuzon.co.uk/meveric stretch InRelease -Hit:3 https://oph.mdrjr.net/meveric all InRelease -Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease -Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease -Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease -Get:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease [91.8 kB] -Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release -Fetched 91.8 kB in 3s (28.5 kB/s) -Reading package lists... Done -Reading package lists... Done -Building dependency tree -Reading state information... Done -Calculating upgrade... Done -0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. - -*** PREPARE DietPi *** -install pip -Hit:1 http://fuzon.co.uk/meveric all InRelease -Hit:2 http://fuzon.co.uk/meveric stretch InRelease -Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease -Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease -Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease -Hit:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease -Hit:3 https://oph.mdrjr.net/meveric all InRelease -Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release -Reading package lists... Done -Reading package lists... Done -Building dependency tree -Reading state information... Done -Package 'fail2ban' is not installed, so not removed -0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. -Reading package lists... Done -Building dependency tree -Reading state information... Done -The following additional packages will be installed: - binutils cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin libc6-dev - libcc1-0 libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 libperl5.24 - libstdc++-6-dev libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils -Suggested packages: - binutils-doc cpp-doc gcc-6-locales debian-keyring gcc-6-doc libstdc++6-6-dbg gcc-multilib - manpages-dev autoconf automake libtool flex bison gdb gcc-doc libgcc1-dbg libgomp1-dbg libitm1-dbg - libatomic1-dbg libasan3-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx2-dbg - libquadmath0-dbg glibc-doc libstdc++-6-doc make-doc ed diffutils-doc perl-doc - libterm-readline-gnu-perl | libterm-readline-perl-perl -Recommended packages: - fakeroot libalgorithm-merge-perl manpages manpages-dev libfile-fcntllock-perl netbase rename -The following NEW packages will be installed: - binutils build-essential cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin - libc6-dev libcc1-0 libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 - libperl5.24 libstdc++-6-dev libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils -0 upgraded, 30 newly installed, 0 to remove and 0 not upgraded. -Need to get 36.8 MB of archives. -After this operation, 138 MB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl-modules-5.24 all 5.24.1-3+deb9u5 [2,722 kB] -Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgdbm3 armhf 1.8.3-14 [28.5 kB] -Get:3 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf libperl5.24 armhf 5.24.1-3+deb9u5 [2,850 kB] -Get:4 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl armhf 5.24.1-3+deb9u5 [219 kB] -Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf xz-utils armhf 5.2.2-1.2+b1 [263 kB] -Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf binutils armhf 2.28-5 [3,900 kB] -Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc-dev-bin armhf 2.24-11+deb9u3 [253 kB] -Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf linux-libc-dev armhf 4.9.130-2 [1,350 kB] -Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc6-dev armhf 2.24-11+deb9u3 [1,995 kB] -Get:10 https://cdn-aws.deb.debian.org/debian stretch/main armhf libisl15 armhf 0.18-1 [441 kB] -Get:11 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpfr4 armhf 3.1.5-1 [536 kB] -Get:12 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpc3 armhf 1.0.3-1+b2 [32.6 kB] -Get:13 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp-6 armhf 6.3.0-18+deb9u1 [5,239 kB] -Get:14 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp armhf 4:6.3.0-4 [18.7 kB] -Get:15 https://cdn-aws.deb.debian.org/debian stretch/main armhf libcc1-0 armhf 6.3.0-18+deb9u1 [25.2 kB] -Get:16 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgomp1 armhf 6.3.0-18+deb9u1 [64.6 kB] -Get:17 https://cdn-aws.deb.debian.org/debian stretch/main armhf libatomic1 armhf 6.3.0-18+deb9u1 [6,010 B] -Get:18 https://cdn-aws.deb.debian.org/debian stretch/main armhf libasan3 armhf 6.3.0-18+deb9u1 [284 kB] -Get:19 https://cdn-aws.deb.debian.org/debian stretch/main armhf libubsan0 armhf 6.3.0-18+deb9u1 [92.9 kB] -Get:20 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgcc-6-dev armhf 6.3.0-18+deb9u1 [531 kB] -Get:21 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc-6 armhf 6.3.0-18+deb9u1 [5,511 kB] -Get:22 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc armhf 4:6.3.0-4 [5,212 B] -Get:23 https://cdn-aws.deb.debian.org/debian stretch/main armhf libstdc++-6-dev armhf 6.3.0-18+deb9u1 [1,487 kB] -Get:24 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++-6 armhf 6.3.0-18+deb9u1 [5,665 kB] -Get:25 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++ armhf 4:6.3.0-4 [1,520 B] -Get:26 https://cdn-aws.deb.debian.org/debian stretch/main armhf make armhf 4.1-9.1 [290 kB] -Get:27 https://cdn-aws.deb.debian.org/debian stretch/main armhf libdpkg-perl all 1.18.25 [1,287 kB] -Get:28 https://cdn-aws.deb.debian.org/debian stretch/main armhf patch armhf 2.7.5-1+deb9u1 [106 kB] -Get:29 https://cdn-aws.deb.debian.org/debian stretch/main armhf dpkg-dev all 1.18.25 [1,595 kB] -Get:30 https://cdn-aws.deb.debian.org/debian stretch/main armhf build-essential armhf 12.3 [7,342 B] -Fetched 36.8 MB in 25s (1,441 kB/s) -Selecting previously unselected package perl-modules-5.24. -(Reading database ... 14111 files and directories currently installed.) -Preparing to unpack .../00-perl-modules-5.24_5.24.1-3+deb9u5_all.deb ... -Unpacking perl-modules-5.24 (5.24.1-3+deb9u5) ... -Selecting previously unselected package libgdbm3:armhf. -Preparing to unpack .../01-libgdbm3_1.8.3-14_armhf.deb ... -Unpacking libgdbm3:armhf (1.8.3-14) ... -Selecting previously unselected package libperl5.24:armhf. -Preparing to unpack .../02-libperl5.24_5.24.1-3+deb9u5_armhf.deb ... -Unpacking libperl5.24:armhf (5.24.1-3+deb9u5) ... -Selecting previously unselected package perl. -Preparing to unpack .../03-perl_5.24.1-3+deb9u5_armhf.deb ... -Unpacking perl (5.24.1-3+deb9u5) ... -Selecting previously unselected package xz-utils. -Preparing to unpack .../04-xz-utils_5.2.2-1.2+b1_armhf.deb ... -Unpacking xz-utils (5.2.2-1.2+b1) ... -Selecting previously unselected package binutils. -Preparing to unpack .../05-binutils_2.28-5_armhf.deb ... -Unpacking binutils (2.28-5) ... -Selecting previously unselected package libc-dev-bin. -Preparing to unpack .../06-libc-dev-bin_2.24-11+deb9u3_armhf.deb ... -Unpacking libc-dev-bin (2.24-11+deb9u3) ... -Selecting previously unselected package linux-libc-dev:armhf. -Preparing to unpack .../07-linux-libc-dev_4.9.130-2_armhf.deb ... -Unpacking linux-libc-dev:armhf (4.9.130-2) ... -Selecting previously unselected package libc6-dev:armhf. -Preparing to unpack .../08-libc6-dev_2.24-11+deb9u3_armhf.deb ... -Unpacking libc6-dev:armhf (2.24-11+deb9u3) ... -Selecting previously unselected package libisl15:armhf. -Preparing to unpack .../09-libisl15_0.18-1_armhf.deb ... -Unpacking libisl15:armhf (0.18-1) ... -Selecting previously unselected package libmpfr4:armhf. -Preparing to unpack .../10-libmpfr4_3.1.5-1_armhf.deb ... -Unpacking libmpfr4:armhf (3.1.5-1) ... -Selecting previously unselected package libmpc3:armhf. -Preparing to unpack .../11-libmpc3_1.0.3-1+b2_armhf.deb ... -Unpacking libmpc3:armhf (1.0.3-1+b2) ... -Selecting previously unselected package cpp-6. -Preparing to unpack .../12-cpp-6_6.3.0-18+deb9u1_armhf.deb ... -Unpacking cpp-6 (6.3.0-18+deb9u1) ... -Selecting previously unselected package cpp. -Preparing to unpack .../13-cpp_4%3a6.3.0-4_armhf.deb ... -Unpacking cpp (4:6.3.0-4) ... -Selecting previously unselected package libcc1-0:armhf. -Preparing to unpack .../14-libcc1-0_6.3.0-18+deb9u1_armhf.deb ... -Unpacking libcc1-0:armhf (6.3.0-18+deb9u1) ... -Selecting previously unselected package libgomp1:armhf. -Preparing to unpack .../15-libgomp1_6.3.0-18+deb9u1_armhf.deb ... -Unpacking libgomp1:armhf (6.3.0-18+deb9u1) ... -Selecting previously unselected package libatomic1:armhf. -Preparing to unpack .../16-libatomic1_6.3.0-18+deb9u1_armhf.deb ... -Unpacking libatomic1:armhf (6.3.0-18+deb9u1) ... -Selecting previously unselected package libasan3:armhf. -Preparing to unpack .../17-libasan3_6.3.0-18+deb9u1_armhf.deb ... -Unpacking libasan3:armhf (6.3.0-18+deb9u1) ... -Selecting previously unselected package libubsan0:armhf. -Preparing to unpack .../18-libubsan0_6.3.0-18+deb9u1_armhf.deb ... -Unpacking libubsan0:armhf (6.3.0-18+deb9u1) ... -Selecting previously unselected package libgcc-6-dev:armhf. -Preparing to unpack .../19-libgcc-6-dev_6.3.0-18+deb9u1_armhf.deb ... -Unpacking libgcc-6-dev:armhf (6.3.0-18+deb9u1) ... -Selecting previously unselected package gcc-6. -Preparing to unpack .../20-gcc-6_6.3.0-18+deb9u1_armhf.deb ... -Unpacking gcc-6 (6.3.0-18+deb9u1) ... -Selecting previously unselected package gcc. -Preparing to unpack .../21-gcc_4%3a6.3.0-4_armhf.deb ... -Unpacking gcc (4:6.3.0-4) ... -Selecting previously unselected package libstdc++-6-dev:armhf. -Preparing to unpack .../22-libstdc++-6-dev_6.3.0-18+deb9u1_armhf.deb ... -Unpacking libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ... -Selecting previously unselected package g++-6. -Preparing to unpack .../23-g++-6_6.3.0-18+deb9u1_armhf.deb ... -Unpacking g++-6 (6.3.0-18+deb9u1) ... -Selecting previously unselected package g++. -Preparing to unpack .../24-g++_4%3a6.3.0-4_armhf.deb ... -Unpacking g++ (4:6.3.0-4) ... -Selecting previously unselected package make. -Preparing to unpack .../25-make_4.1-9.1_armhf.deb ... -Unpacking make (4.1-9.1) ... -Selecting previously unselected package libdpkg-perl. -Preparing to unpack .../26-libdpkg-perl_1.18.25_all.deb ... -Unpacking libdpkg-perl (1.18.25) ... -Selecting previously unselected package patch. -Preparing to unpack .../27-patch_2.7.5-1+deb9u1_armhf.deb ... -Unpacking patch (2.7.5-1+deb9u1) ... -Selecting previously unselected package dpkg-dev. -Preparing to unpack .../28-dpkg-dev_1.18.25_all.deb ... -Unpacking dpkg-dev (1.18.25) ... -Selecting previously unselected package build-essential. -Preparing to unpack .../29-build-essential_12.3_armhf.deb ... -Unpacking build-essential (12.3) ... -Setting up libgomp1:armhf (6.3.0-18+deb9u1) ... -Setting up libatomic1:armhf (6.3.0-18+deb9u1) ... -Setting up perl-modules-5.24 (5.24.1-3+deb9u5) ... -Setting up libgdbm3:armhf (1.8.3-14) ... -Setting up libperl5.24:armhf (5.24.1-3+deb9u5) ... -Setting up libcc1-0:armhf (6.3.0-18+deb9u1) ... -Setting up make (4.1-9.1) ... -Setting up libasan3:armhf (6.3.0-18+deb9u1) ... -Setting up libubsan0:armhf (6.3.0-18+deb9u1) ... -Setting up linux-libc-dev:armhf (4.9.130-2) ... -Setting up perl (5.24.1-3+deb9u5) ... -update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode -Setting up libisl15:armhf (0.18-1) ... -Setting up patch (2.7.5-1+deb9u1) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Setting up xz-utils (5.2.2-1.2+b1) ... -update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode -Setting up libmpfr4:armhf (3.1.5-1) ... -Setting up libmpc3:armhf (1.0.3-1+b2) ... -Setting up binutils (2.28-5) ... -Setting up cpp-6 (6.3.0-18+deb9u1) ... -Setting up libc-dev-bin (2.24-11+deb9u3) ... -Setting up libc6-dev:armhf (2.24-11+deb9u3) ... -Setting up cpp (4:6.3.0-4) ... -Setting up libgcc-6-dev:armhf (6.3.0-18+deb9u1) ... -Setting up libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ... -Setting up libdpkg-perl (1.18.25) ... -Setting up gcc-6 (6.3.0-18+deb9u1) ... -Setting up g++-6 (6.3.0-18+deb9u1) ... -Setting up dpkg-dev (1.18.25) ... -Setting up gcc (4:6.3.0-4) ... -Setting up g++ (4:6.3.0-4) ... -update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode -Setting up build-essential (12.3) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Reading package lists... Done -Building dependency tree -Reading state information... Done -The following additional packages will be installed: - libexpat1 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib mime-support python - python-minimal python-pip-whl python2.7 python2.7-minimal -Suggested packages: - python-doc python-tk python2.7-doc binfmt-support -Recommended packages: - file python-all-dev python-setuptools python-wheel -The following NEW packages will be installed: - libexpat1 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib mime-support python - python-minimal python-pip python-pip-whl python2.7 python2.7-minimal -0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. -Need to get 5,571 kB of archives. -After this operation, 17.5 MB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython2.7-minimal armhf 2.7.13-2+deb9u3 [389 kB] -Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf python2.7-minimal armhf 2.7.13-2+deb9u3 [1,176 kB] -Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-minimal armhf 2.7.13-2 [40.5 kB] -Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf mime-support all 3.60 [36.7 kB] -Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf libexpat1 armhf 2.2.0-2+deb9u1 [64.4 kB] -Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython2.7-stdlib armhf 2.7.13-2+deb9u3 [1,821 kB] -Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf python2.7 armhf 2.7.13-2+deb9u3 [285 kB] -Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython-stdlib armhf 2.7.13-2 [20.0 kB] -Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf python armhf 2.7.13-2 [154 kB] -Get:10 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-pip-whl all 9.0.1-2 [1,406 kB] -Get:11 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-pip all 9.0.1-2 [179 kB] -Fetched 5,571 kB in 4s (1,167 kB/s) -Selecting previously unselected package libpython2.7-minimal:armhf. -(Reading database ... 18920 files and directories currently installed.) -Preparing to unpack .../0-libpython2.7-minimal_2.7.13-2+deb9u3_armhf.deb ... -Unpacking libpython2.7-minimal:armhf (2.7.13-2+deb9u3) ... -Selecting previously unselected package python2.7-minimal. -Preparing to unpack .../1-python2.7-minimal_2.7.13-2+deb9u3_armhf.deb ... -Unpacking python2.7-minimal (2.7.13-2+deb9u3) ... -Selecting previously unselected package python-minimal. -Preparing to unpack .../2-python-minimal_2.7.13-2_armhf.deb ... -Unpacking python-minimal (2.7.13-2) ... -Selecting previously unselected package mime-support. -Preparing to unpack .../3-mime-support_3.60_all.deb ... -Unpacking mime-support (3.60) ... -Selecting previously unselected package libexpat1:armhf. -Preparing to unpack .../4-libexpat1_2.2.0-2+deb9u1_armhf.deb ... -Unpacking libexpat1:armhf (2.2.0-2+deb9u1) ... -Selecting previously unselected package libpython2.7-stdlib:armhf. -Preparing to unpack .../5-libpython2.7-stdlib_2.7.13-2+deb9u3_armhf.deb ... -Unpacking libpython2.7-stdlib:armhf (2.7.13-2+deb9u3) ... -Selecting previously unselected package python2.7. -Preparing to unpack .../6-python2.7_2.7.13-2+deb9u3_armhf.deb ... -Unpacking python2.7 (2.7.13-2+deb9u3) ... -Selecting previously unselected package libpython-stdlib:armhf. -Preparing to unpack .../7-libpython-stdlib_2.7.13-2_armhf.deb ... -Unpacking libpython-stdlib:armhf (2.7.13-2) ... -Setting up libpython2.7-minimal:armhf (2.7.13-2+deb9u3) ... -Setting up python2.7-minimal (2.7.13-2+deb9u3) ... -Linking and byte-compiling packages for runtime python2.7... -Setting up python-minimal (2.7.13-2) ... -Selecting previously unselected package python. -(Reading database ... 19701 files and directories currently installed.) -Preparing to unpack .../python_2.7.13-2_armhf.deb ... -Unpacking python (2.7.13-2) ... -Selecting previously unselected package python-pip-whl. -Preparing to unpack .../python-pip-whl_9.0.1-2_all.deb ... -Unpacking python-pip-whl (9.0.1-2) ... -Selecting previously unselected package python-pip. -Preparing to unpack .../python-pip_9.0.1-2_all.deb ... -Unpacking python-pip (9.0.1-2) ... -Setting up python-pip-whl (9.0.1-2) ... -Setting up libexpat1:armhf (2.2.0-2+deb9u1) ... -Setting up mime-support (3.60) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Setting up libpython2.7-stdlib:armhf (2.7.13-2+deb9u3) ... -Setting up python2.7 (2.7.13-2+deb9u3) ... -Setting up libpython-stdlib:armhf (2.7.13-2) ... -Setting up python (2.7.13-2) ... -Setting up python-pip (9.0.1-2) ... - -*** CONFIG *** -sudo: raspi-config: command not found -bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory -bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory -bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory - -*** SOFTWARE UPDATE *** -Reading package lists... Done -Building dependency tree -Reading state information... Done -bash-completion is already the newest version (1:2.1-4.3). -curl is already the newest version (7.52.1-5+deb9u8). -htop is already the newest version (2.0.2-1). -The following additional packages will be installed: - dc git-man liberror-perl libjq1 libonig4 -Suggested packages: - gettext-base git-daemon-run | git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb - git-arch git-cvs git-mediawiki git-svn -Recommended packages: - less rsync ssh-client -The following NEW packages will be installed: - dc dphys-swapfile git git-man jq liberror-perl libjq1 libonig4 -0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. -Need to get 5,514 kB of archives. -After this operation, 23.4 MB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf liberror-perl all 0.17024-1 [26.9 kB] -Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf git-man all 1:2.11.0-3+deb9u4 [1,433 kB] -Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf git armhf 1:2.11.0-3+deb9u4 [3,661 kB] -Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf dc armhf 1.06.95-9+b3 [64.8 kB] -Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf dphys-swapfile all 20100506-3 [19.7 kB] -Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libonig4 armhf 6.1.3-2 [128 kB] -Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libjq1 armhf 1.5+dfsg-1.3 [122 kB] -Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf jq armhf 1.5+dfsg-1.3 [59.2 kB] -Fetched 5,514 kB in 5s (1,026 kB/s) -Selecting previously unselected package liberror-perl. -(Reading database ... 19894 files and directories currently installed.) -Preparing to unpack .../0-liberror-perl_0.17024-1_all.deb ... -Unpacking liberror-perl (0.17024-1) ... -Selecting previously unselected package git-man. -Preparing to unpack .../1-git-man_1%3a2.11.0-3+deb9u4_all.deb ... -Unpacking git-man (1:2.11.0-3+deb9u4) ... -Selecting previously unselected package git. -Preparing to unpack .../2-git_1%3a2.11.0-3+deb9u4_armhf.deb ... -Unpacking git (1:2.11.0-3+deb9u4) ... -Selecting previously unselected package dc. -Preparing to unpack .../3-dc_1.06.95-9+b3_armhf.deb ... -Unpacking dc (1.06.95-9+b3) ... -Selecting previously unselected package dphys-swapfile. -Preparing to unpack .../4-dphys-swapfile_20100506-3_all.deb ... -Unpacking dphys-swapfile (20100506-3) ... -Selecting previously unselected package libonig4:armhf. -Preparing to unpack .../5-libonig4_6.1.3-2_armhf.deb ... -Unpacking libonig4:armhf (6.1.3-2) ... -Selecting previously unselected package libjq1:armhf. -Preparing to unpack .../6-libjq1_1.5+dfsg-1.3_armhf.deb ... -Unpacking libjq1:armhf (1.5+dfsg-1.3) ... -Selecting previously unselected package jq. -Preparing to unpack .../7-jq_1.5+dfsg-1.3_armhf.deb ... -Unpacking jq (1.5+dfsg-1.3) ... -Setting up git-man (1:2.11.0-3+deb9u4) ... -Setting up liberror-perl (0.17024-1) ... -Setting up libonig4:armhf (6.1.3-2) ... -Setting up libjq1:armhf (1.5+dfsg-1.3) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Setting up dc (1.06.95-9+b3) ... -Processing triggers for systemd (232-25+deb9u8) ... -Setting up git (1:2.11.0-3+deb9u4) ... -Setting up jq (1.5+dfsg-1.3) ... -Setting up dphys-swapfile (20100506-3) ... -Processing triggers for systemd (232-25+deb9u8) ... -Reading package lists... Done -Building dependency tree -Reading state information... Done -Suggested packages: - vnstati -The following NEW packages will be installed: - vnstat -0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. -Need to get 78.6 kB of archives. -After this operation, 206 kB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf vnstat armhf 1.15-2 [78.6 kB] -Fetched 78.6 kB in 0s (97.8 kB/s) -Selecting previously unselected package vnstat. -(Reading database ... 20819 files and directories currently installed.) -Preparing to unpack .../vnstat_1.15-2_armhf.deb ... -Unpacking vnstat (1.15-2) ... -Setting up vnstat (1.15-2) ... -Created symlink /etc/systemd/system/multi-user.target.wants/vnstat.service → /lib/systemd/system/vnstat.service. -Processing triggers for systemd (232-25+deb9u8) ... - -*** ADDING MAIN USER admin *** -Adding user `admin' ... -Adding new group `admin' (1002) ... -Adding new user `admin' (1002) with group `admin' ... -Creating home directory `/home/admin' ... -Copying files from `/etc/skel' ... -Adding user `admin' to group `sudo' ... -Adding user admin to group sudo -Done. -%sudo ALL=(ALL) NOPASSWD:ALL -*** ADDING SERVICE USER bitcoin -Adding user `bitcoin' ... -Adding new group `bitcoin' (1003) ... -Adding new user `bitcoin' (1003) with group `bitcoin' ... -Creating home directory `/home/bitcoin' ... -Copying files from `/etc/skel' ... - -*** SWAP FILE *** - -*** INCREASE OPEN FILE LIMIT *** - -*** BITCOIN *** ---2019-01-27 15:17:32-- https://bitcoin.org/bin/bitcoin-core-0.17.0.1/bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz -Resolving bitcoin.org (bitcoin.org)... 138.68.248.245 -Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 24306145 (23M) [application/octet-stream] -Saving to: ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ - -bitcoin-0.17.0.1-arm-linu 100%[===================================>] 23.18M 208KB/s in 1m 59s - -2019-01-27 15:19:32 (200 KB/s) - ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ saved [24306145/24306145] - ---2019-01-27 15:19:32-- https://bitcoin.org/laanwj-releases.asc -Resolving bitcoin.org (bitcoin.org)... 138.68.248.245 -Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 17940 (18K) [application/octet-stream] -Saving to: ‘laanwj-releases.asc’ - -laanwj-releases.asc 100%[===================================>] 17.52K --.-KB/s in 0.002s - -2019-01-27 15:19:33 (10.4 MB/s) - ‘laanwj-releases.asc’ saved [17940/17940] - -key 90C8019E36C2E964: -25 signatures not checked due to missing keys -gpg: /root/.gnupg/trustdb.gpg: trustdb created -gpg: key 90C8019E36C2E964: public key "Wladimir J. van der Laan (Bitcoin Core binary release signing key) " imported -gpg: Total number processed: 1 -gpg: imported: 1 -gpg: no ultimately trusted keys found ---2019-01-27 15:19:34-- https://bitcoin.org/bin/bitcoin-core-0.17.0.1/SHA256SUMS.asc -Resolving bitcoin.org (bitcoin.org)... 138.68.248.245 -Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 1979 (1.9K) [application/octet-stream] -Saving to: ‘SHA256SUMS.asc’ - -SHA256SUMS.asc 100%[===================================>] 1.93K --.-KB/s in 0s - -2019-01-27 15:19:35 (19.6 MB/s) - ‘SHA256SUMS.asc’ saved [1979/1979] - -goodSignature(1) -correctKey(1) -bitcoin-0.17.0/ -bitcoin-0.17.0/bin/ -bitcoin-0.17.0/bin/bitcoin-cli -bitcoin-0.17.0/bin/bitcoind -bitcoin-0.17.0/bin/bitcoin-qt -bitcoin-0.17.0/bin/bitcoin-tx -bitcoin-0.17.0/bin/test_bitcoin -bitcoin-0.17.0/include/ -bitcoin-0.17.0/include/bitcoinconsensus.h -bitcoin-0.17.0/lib/ -bitcoin-0.17.0/lib/libbitcoinconsensus.so -bitcoin-0.17.0/lib/libbitcoinconsensus.so.0 -bitcoin-0.17.0/lib/libbitcoinconsensus.so.0.0.0 -bitcoin-0.17.0/share/ -bitcoin-0.17.0/share/man/ -bitcoin-0.17.0/share/man/man1/ -bitcoin-0.17.0/share/man/man1/bitcoin-cli.1 -bitcoin-0.17.0/share/man/man1/bitcoind.1 -bitcoin-0.17.0/share/man/man1/bitcoin-qt.1 -bitcoin-0.17.0/share/man/man1/bitcoin-tx.1 - -*** LITECOIN *** ---2019-01-27 15:19:39-- https://download.litecoin.org/litecoin-0.16.3/linux/litecoin-0.16.3-arm-linux-gnueabihf.tar.gz -Resolving download.litecoin.org (download.litecoin.org)... 104.27.4.55, 104.27.5.55 -Connecting to download.litecoin.org (download.litecoin.org)|104.27.4.55|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 9568024 (9.1M) [application/octet-stream] -Saving to: ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ - -litecoin-0.16.3-arm-linux 100%[===================================>] 9.12M 1.49MB/s in 6.3s - -2019-01-27 15:19:46 (1.46 MB/s) - ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ saved [9568024/9568024] - -litecoin-0.16.3/ -litecoin-0.16.3/bin/ -litecoin-0.16.3/bin/litecoin-cli -litecoin-0.16.3/bin/litecoind -litecoin-0.16.3/bin/litecoin-tx -litecoin-0.16.3/bin/test_litecoin -litecoin-0.16.3/share/ -litecoin-0.16.3/share/man/ -litecoin-0.16.3/share/man/man1/ -litecoin-0.16.3/share/man/man1/litecoin-cli.1 -litecoin-0.16.3/share/man/man1/litecoind.1 -litecoin-0.16.3/share/man/man1/litecoin-tx.1 - -*** LND *** ---2019-01-27 15:19:47-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/lnd-linux-armv7-v0.5.1-beta.tar.gz -Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4 -Connecting to github.com (github.com)|140.82.118.3|:443... connected. -HTTP request sent, awaiting response... 302 Found -Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190127%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190127T151948Z&X-Amz-Expires=300&X-Amz-Signature=7073a558d8789265bce0f1c254a62e98e00e9270f68733d81511eb045d558c48&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream [following] ---2019-01-27 15:19:48-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190127%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190127T151948Z&X-Amz-Expires=300&X-Amz-Signature=7073a558d8789265bce0f1c254a62e98e00e9270f68733d81511eb045d558c48&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream -Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.239.75 -Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.239.75|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 19198203 (18M) [application/octet-stream] -Saving to: ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ - -lnd-linux-armv7-v0.5.1-be 100%[===================================>] 18.31M 1.09MB/s in 19s - -2019-01-27 15:20:08 (966 KB/s) - ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ saved [19198203/19198203] - ---2019-01-27 15:20:08-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt -Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3 -Connecting to github.com (github.com)|140.82.118.4|:443... connected. -HTTP request sent, awaiting response... 302 Found -Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190127%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190127T152008Z&X-Amz-Expires=300&X-Amz-Signature=948000446671523853b43a31a7ff85843d7a1479cdbfb64504eaa11b62f547fd&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream [following] ---2019-01-27 15:20:08-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190127%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190127T152008Z&X-Amz-Expires=300&X-Amz-Signature=948000446671523853b43a31a7ff85843d7a1479cdbfb64504eaa11b62f547fd&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream -Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.99.3 -Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.99.3|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 2026 (2.0K) [application/octet-stream] -Saving to: ‘manifest-v0.5.1-beta.txt’ - -manifest-v0.5.1-beta.txt 100%[===================================>] 1.98K --.-KB/s in 0.005s - -2019-01-27 15:20:09 (437 KB/s) - ‘manifest-v0.5.1-beta.txt’ saved [2026/2026] - ---2019-01-27 15:20:09-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt.sig -Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4 -Connecting to github.com (github.com)|140.82.118.3|:443... connected. -HTTP request sent, awaiting response... 302 Found -Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190127%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190127T152009Z&X-Amz-Expires=300&X-Amz-Signature=d3a1c30c29d0f9c4fd721127791a7abe0974c440978a19f7ea1ca567fba27e69&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream [following] ---2019-01-27 15:20:09-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190127%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190127T152009Z&X-Amz-Expires=300&X-Amz-Signature=d3a1c30c29d0f9c4fd721127791a7abe0974c440978a19f7ea1ca567fba27e69&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream -Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.99.3 -Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.99.3|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 566 [application/octet-stream] -Saving to: ‘manifest-v0.5.1-beta.txt.sig’ - -manifest-v0.5.1-beta.txt. 100%[===================================>] 566 --.-KB/s in 0.001s - -2019-01-27 15:20:10 (702 KB/s) - ‘manifest-v0.5.1-beta.txt.sig’ saved [566/566] - ---2019-01-27 15:20:10-- https://keybase.io/roasbeef/pgp_keys.asc -Resolving keybase.io (keybase.io)... 52.6.136.121, 52.55.1.130 -Connecting to keybase.io (keybase.io)|52.6.136.121|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 6909 (6.7K) [text/plain] -Saving to: ‘pgp_keys.asc’ - -pgp_keys.asc 100%[===================================>] 6.75K --.-KB/s in 0s - -2019-01-27 15:20:10 (91.5 MB/s) - ‘pgp_keys.asc’ saved [6909/6909] - -gpg: key 8B80CD2BB8BD8132: public key "Olaoluwa Osuntokun " imported -gpg: Total number processed: 1 -gpg: imported: 1 -goodSignature(1) -correctKey(1) -*** Installing Go *** ---2019-01-27 15:20:18-- https://storage.googleapis.com/golang/go1.11.linux-armv6l.tar.gz -Resolving storage.googleapis.com (storage.googleapis.com)... 216.58.204.48, 2a00:1450:4009:80f::2010 -Connecting to storage.googleapis.com (storage.googleapis.com)|216.58.204.48|:443... connected. -HTTP request sent, awaiting response... 200 OK -Length: 101718267 (97M) [application/octet-stream] -Saving to: ‘go1.11.linux-armv6l.tar.gz’ - -go1.11.linux-armv6l.tar.g 100%[===================================>] 97.01M 1.43MB/s in 69s - -2019-01-27 15:21:28 (1.41 MB/s) - ‘go1.11.linux-armv6l.tar.gz’ saved [101718267/101718267] - - - -*** RASPIBLITZ EXTRAS *** -Reading package lists... Done -Building dependency tree -Reading state information... Done -bc is already the newest version (1.06.95-9+b3). -The following NEW packages will be installed: - dialog -0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. -Need to get 240 kB of archives. -After this operation, 883 kB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf dialog armhf 1.3-20160828-2 [240 kB] -Fetched 240 kB in 2s (111 kB/s) -Selecting previously unselected package dialog. -(Reading database ... 20834 files and directories currently installed.) -Preparing to unpack .../dialog_1.3-20160828-2_armhf.deb ... -Unpacking dialog (1.3-20160828-2) ... -Setting up dialog (1.3-20160828-2) ... -Reading package lists... Done -Building dependency tree -Reading state information... Done -The following additional packages will be installed: - fuse libfuse2 -Recommended packages: - exfat-utils -The following NEW packages will be installed: - exfat-fuse fuse libfuse2 -0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. -Need to get 214 kB of archives. -After this operation, 426 kB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libfuse2 armhf 2.9.7-1+deb9u2 [116 kB] -Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf fuse armhf 2.9.7-1+deb9u2 [70.3 kB] -Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf exfat-fuse armhf 1.2.5-2 [27.6 kB] -Fetched 214 kB in 2s (104 kB/s) -Selecting previously unselected package libfuse2:armhf. -(Reading database ... 20992 files and directories currently installed.) -Preparing to unpack .../libfuse2_2.9.7-1+deb9u2_armhf.deb ... -Unpacking libfuse2:armhf (2.9.7-1+deb9u2) ... -Selecting previously unselected package fuse. -Preparing to unpack .../fuse_2.9.7-1+deb9u2_armhf.deb ... -Unpacking fuse (2.9.7-1+deb9u2) ... -Selecting previously unselected package exfat-fuse. -Preparing to unpack .../exfat-fuse_1.2.5-2_armhf.deb ... -Unpacking exfat-fuse (1.2.5-2) ... -Setting up libfuse2:armhf (2.9.7-1+deb9u2) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Setting up fuse (2.9.7-1+deb9u2) ... -update-initramfs: deferring update (trigger activated) -Setting up exfat-fuse (1.2.5-2) ... -Processing triggers for initramfs-tools (0.130) ... -ln: failed to create hard link '/boot/initrd.img-4.14.66+.dpkg-bak' => '/boot/initrd.img-4.14.66+': Operation not permitted -update-initramfs: Generating /boot/initrd.img-4.14.66+ -Image Name: uInitrd -Created: Sun Jan 27 15:21:55 2019 -Image Type: ARM Linux RAMDisk Image (uncompressed) -Data Size: 5715860 Bytes = 5581.89 kB = 5.45 MB -Load Address: 00000000 -Entry Point: 00000000 -Reading package lists... Done -Building dependency tree -Reading state information... Done -The following additional packages will be installed: - libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-common -Suggested packages: - minissdpd natpmp-utils transmission-daemon transmission-gtk -Recommended packages: - minissdpd -The following NEW packages will be installed: - libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-cli transmission-common -0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. -Need to get 776 kB of archives. -After this operation, 2,814 kB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libevent-2.0-5 armhf 2.0.21-stable-3 [134 kB] -Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libminiupnpc10 armhf 1.9.20140610-4 [25.7 kB] -Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf libnatpmp1 armhf 20110808-4+b1 [8,338 B] -Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-common all 2.92-2+deb9u1 [288 kB] -Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-cli armhf 2.92-2+deb9u1 [320 kB] -Fetched 776 kB in 2s (260 kB/s) -Selecting previously unselected package libevent-2.0-5:armhf. -(Reading database ... 21027 files and directories currently installed.) -Preparing to unpack .../libevent-2.0-5_2.0.21-stable-3_armhf.deb ... -Unpacking libevent-2.0-5:armhf (2.0.21-stable-3) ... -Selecting previously unselected package libminiupnpc10:armhf. -Preparing to unpack .../libminiupnpc10_1.9.20140610-4_armhf.deb ... -Unpacking libminiupnpc10:armhf (1.9.20140610-4) ... -Selecting previously unselected package libnatpmp1:armhf. -Preparing to unpack .../libnatpmp1_20110808-4+b1_armhf.deb ... -Unpacking libnatpmp1:armhf (20110808-4+b1) ... -Selecting previously unselected package transmission-common. -Preparing to unpack .../transmission-common_2.92-2+deb9u1_all.deb ... -Unpacking transmission-common (2.92-2+deb9u1) ... -Selecting previously unselected package transmission-cli. -Preparing to unpack .../transmission-cli_2.92-2+deb9u1_armhf.deb ... -Unpacking transmission-cli (2.92-2+deb9u1) ... -Setting up libminiupnpc10:armhf (1.9.20140610-4) ... -Setting up libnatpmp1:armhf (20110808-4+b1) ... -Setting up transmission-common (2.92-2+deb9u1) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Setting up libevent-2.0-5:armhf (2.0.21-stable-3) ... -Setting up transmission-cli (2.92-2+deb9u1) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Reading package lists... Done -Building dependency tree -Reading state information... Done -The following additional packages will be installed: - libtorrent19 libxmlrpc-core-c3 -Suggested packages: - screen | dtach -The following NEW packages will be installed: - libtorrent19 libxmlrpc-core-c3 rtorrent -0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. -Need to get 891 kB of archives. -After this operation, 2,281 kB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libxmlrpc-core-c3 armhf 1.33.14-4 [128 kB] -Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libtorrent19 armhf 0.13.6-1.1 [345 kB] -Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf rtorrent armhf 0.9.6-2+b1 [418 kB] -Fetched 891 kB in 3s (235 kB/s) -Selecting previously unselected package libxmlrpc-core-c3. -(Reading database ... 21168 files and directories currently installed.) -Preparing to unpack .../libxmlrpc-core-c3_1.33.14-4_armhf.deb ... -Unpacking libxmlrpc-core-c3 (1.33.14-4) ... -Selecting previously unselected package libtorrent19:armhf. -Preparing to unpack .../libtorrent19_0.13.6-1.1_armhf.deb ... -Unpacking libtorrent19:armhf (0.13.6-1.1) ... -Selecting previously unselected package rtorrent. -Preparing to unpack .../rtorrent_0.9.6-2+b1_armhf.deb ... -Unpacking rtorrent (0.9.6-2+b1) ... -Setting up libtorrent19:armhf (0.13.6-1.1) ... -Setting up libxmlrpc-core-c3 (1.33.14-4) ... -Setting up rtorrent (0.9.6-2+b1) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Reading package lists... Done -Building dependency tree -Reading state information... Done -Suggested packages: - byobu | screenie | iselect ncurses-term -The following NEW packages will be installed: - screen -0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. -Need to get 568 kB of archives. -After this operation, 860 kB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf screen armhf 4.5.0-6 [568 kB] -Fetched 568 kB in 2s (224 kB/s) -Selecting previously unselected package screen. -(Reading database ... 21205 files and directories currently installed.) -Preparing to unpack .../screen_4.5.0-6_armhf.deb ... -Unpacking screen (4.5.0-6) ... -Processing triggers for systemd (232-25+deb9u8) ... -Setting up screen (4.5.0-6) ... -Processing triggers for systemd (232-25+deb9u8) ... -Cloning into 'raspiblitz'... -remote: Enumerating objects: 54, done. -remote: Counting objects: 100% (54/54), done. -remote: Compressing objects: 100% (41/41), done. -remote: Total 4754 (delta 29), reused 36 (delta 13), pack-reused 4700 -Receiving objects: 100% (4754/4754), 16.49 MiB | 375.00 KiB/s, done. -Resolving deltas: 100% (3345/3345), done. -cp: -r not specified; omitting directory '/home/admin/raspiblitz/home.admin/config.scripts' - -*** HARDENING *** -Reading package lists... Done -Building dependency tree -Reading state information... Done -The following additional packages will be installed: - dh-python libmpdec2 libpython3-stdlib libpython3.5-minimal libpython3.5-stdlib python3 - python3-minimal python3.5 python3.5-minimal -Suggested packages: - mailx system-log-daemon monit python3-doc python3-tk python3-venv python3.5-venv python3.5-doc - binfmt-support -Recommended packages: - iptables whois python3-pyinotify python3-systemd -The following NEW packages will be installed: - dh-python fail2ban libmpdec2 libpython3-stdlib libpython3.5-minimal libpython3.5-stdlib python3 - python3-minimal python3.5 python3.5-minimal -0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded. -Need to get 4,840 kB of archives. -After this operation, 22.5 MB of additional disk space will be used. -Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython3.5-minimal armhf 3.5.3-1+deb9u1 [565 kB] -Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3.5-minimal armhf 3.5.3-1+deb9u1 [1,441 kB] -Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3-minimal armhf 3.5.3-1 [35.3 kB] -Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpdec2 armhf 2.4.2-1 [69.6 kB] -Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython3.5-stdlib armhf 3.5.3-1+deb9u1 [2,085 kB] -Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3.5 armhf 3.5.3-1+deb9u1 [229 kB] -Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython3-stdlib armhf 3.5.3-1 [18.6 kB] -Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf dh-python all 2.20170125 [86.8 kB] -Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3 armhf 3.5.3-1 [21.6 kB] -Get:10 https://cdn-aws.deb.debian.org/debian stretch/main armhf fail2ban all 0.9.6-2 [288 kB] -Fetched 4,840 kB in 15s (315 kB/s) -Selecting previously unselected package libpython3.5-minimal:armhf. -(Reading database ... 21265 files and directories currently installed.) -Preparing to unpack .../0-libpython3.5-minimal_3.5.3-1+deb9u1_armhf.deb ... -Unpacking libpython3.5-minimal:armhf (3.5.3-1+deb9u1) ... -Selecting previously unselected package python3.5-minimal. -Preparing to unpack .../1-python3.5-minimal_3.5.3-1+deb9u1_armhf.deb ... -Unpacking python3.5-minimal (3.5.3-1+deb9u1) ... -Selecting previously unselected package python3-minimal. -Preparing to unpack .../2-python3-minimal_3.5.3-1_armhf.deb ... -Unpacking python3-minimal (3.5.3-1) ... -Selecting previously unselected package libmpdec2:armhf. -Preparing to unpack .../3-libmpdec2_2.4.2-1_armhf.deb ... -Unpacking libmpdec2:armhf (2.4.2-1) ... -Selecting previously unselected package libpython3.5-stdlib:armhf. -Preparing to unpack .../4-libpython3.5-stdlib_3.5.3-1+deb9u1_armhf.deb ... -Unpacking libpython3.5-stdlib:armhf (3.5.3-1+deb9u1) ... -Selecting previously unselected package python3.5. -Preparing to unpack .../5-python3.5_3.5.3-1+deb9u1_armhf.deb ... -Unpacking python3.5 (3.5.3-1+deb9u1) ... -Selecting previously unselected package libpython3-stdlib:armhf. -Preparing to unpack .../6-libpython3-stdlib_3.5.3-1_armhf.deb ... -Unpacking libpython3-stdlib:armhf (3.5.3-1) ... -Selecting previously unselected package dh-python. -Preparing to unpack .../7-dh-python_2.20170125_all.deb ... -Unpacking dh-python (2.20170125) ... -Setting up libpython3.5-minimal:armhf (3.5.3-1+deb9u1) ... -Setting up python3.5-minimal (3.5.3-1+deb9u1) ... -Setting up python3-minimal (3.5.3-1) ... -Selecting previously unselected package python3. -(Reading database ... 22179 files and directories currently installed.) -Preparing to unpack .../python3_3.5.3-1_armhf.deb ... -Unpacking python3 (3.5.3-1) ... -Selecting previously unselected package fail2ban. -Preparing to unpack .../fail2ban_0.9.6-2_all.deb ... -Unpacking fail2ban (0.9.6-2) ... -Processing triggers for mime-support (3.60) ... -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Processing triggers for systemd (232-25+deb9u8) ... -Setting up libmpdec2:armhf (2.4.2-1) ... -Setting up libpython3.5-stdlib:armhf (3.5.3-1+deb9u1) ... -Setting up python3.5 (3.5.3-1+deb9u1) ... -Setting up libpython3-stdlib:armhf (3.5.3-1) ... -Setting up python3 (3.5.3-1) ... -running python rtupdate hooks for python3.5... -running python post-rtupdate hooks for python3.5... -Setting up dh-python (2.20170125) ... -Setting up fail2ban (0.9.6-2) ... -Created symlink /etc/systemd/system/multi-user.target.wants/fail2ban.service → /lib/systemd/system/fail2ban.service. -Job for fail2ban.service failed because the control process exited with error code. -See "systemctl status fail2ban.service" and "journalctl -xe" for details. -invoke-rc.d: initscript fail2ban, action "start" failed. -● fail2ban.service - Fail2Ban Service - Loaded: loaded (/lib/systemd/system/fail2ban.service; enabled; vendor preset: enabled) - Active: activating (auto-restart) (Result: exit-code) since Sun 2019-01-27 15:23:55 GMT; 24ms ago - Docs: man:fail2ban(1) - Process: 6624 ExecStart=/usr/bin/fail2ban-client -x start (code=exited, status=255) - -Jan 27 15:23:55 DietPi systemd[1]: fail2ban.service: Unit entered failed state. -Jan 27 15:23:55 DietPi systemd[1]: fail2ban.service: Failed with result 'exit-code'. -dpkg: error processing package fail2ban (--configure): -subprocess installed post-installation script returned error exit status 1 -Processing triggers for libc-bin (2.24-11+deb9u3) ... -Processing triggers for systemd (232-25+deb9u8) ... -Errors were encountered while processing: -fail2ban -E: Sub-process /usr/bin/dpkg returned an error code (1) - -*** RASPI BOOSTRAP SERVICE *** -Created symlink /etc/systemd/system/multi-user.target.wants/bootstrap.service → /etc/systemd/system/bootstrap.service. - -*** RASPI BACKGROUND SERVICE *** -Created symlink /etc/systemd/system/multi-user.target.wants/background.service → /etc/systemd/system/background.service. -*** Adding Tor Sources to sources.list *** -deb http://deb.torproject.org/torproject.org stretch main -deb-src http://deb.torproject.org/torproject.org stretch main -OK - -*** Installing dirmngr *** -Reading package lists... Done -Building dependency tree -Reading state information... Done -dirmngr is already the newest version (2.1.18-8~deb9u3). -0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. -1 not fully installed or removed. -After this operation, 0 B of additional disk space will be used. -Do you want to continue? [Y/n] y -Setting up fail2ban (0.9.6-2) ... -Job for fail2ban.service failed because the control process exited with error code. -See "systemctl status fail2ban.service" and "journalctl -xe" for details. -invoke-rc.d: initscript fail2ban, action "start" failed. -● fail2ban.service - Fail2Ban Service - Loaded: loaded (/lib/systemd/system/fail2ban.service; enabled; vendor preset: enabled) - Active: activating (auto-restart) (Result: exit-code) since Sun 2019-01-27 15:25:27 GMT; 20ms ago - Docs: man:fail2ban(1) - Process: 6824 ExecStart=/usr/bin/fail2ban-client -x start (code=exited, status=255) - -Jan 27 15:25:27 DietPi systemd[1]: fail2ban.service: Unit entered failed state. -Jan 27 15:25:27 DietPi systemd[1]: fail2ban.service: Failed with result 'exit-code'. -dpkg: error processing package fail2ban (--configure): -subprocess installed post-installation script returned error exit status 1 -Errors were encountered while processing: -fail2ban -E: Sub-process /usr/bin/dpkg returned an error code (1) - -*** Fetching GPG key *** -uid deb.torproject.org archive signing key -sig!3 EE8CBC9E886DDD89 2012-08-29 [self-signature] -sig!3 EE8CBC9E886DDD89 2014-08-31 [self-signature] -sig!3 EE8CBC9E886DDD89 2009-09-04 [self-signature] -sig!3 EE8CBC9E886DDD89 2018-08-06 [self-signature] -sub 74A941BA219EC810 -sig! EE8CBC9E886DDD89 2012-08-29 [self-signature] -sig! EE8CBC9E886DDD89 2014-08-31 [self-signature] -sig! EE8CBC9E886DDD89 2009-09-04 [self-signature] -sig! EE8CBC9E886DDD89 2018-08-06 [self-signature] -key EE8CBC9E886DDD89: -2 duplicate signatures removed -82 signatures not checked due to missing keys -gpg: key EE8CBC9E886DDD89: public key "deb.torproject.org archive signing key" imported -gpg: key 8E4F3C64886DDD89: public key "Totally Legit Signing Key " imported -gpg: no ultimately trusted keys found -gpg: Total number processed: 2 -gpg: imported: 2 -key EE8CBC9E886DDD89: -82 signatures not checked due to missing keys -OK -uid deb.torproject.org archive signing key -sig!3 EE8CBC9E886DDD89 2012-08-29 [self-signature] -sig!3 EE8CBC9E886DDD89 2014-08-31 [self-signature] -sig!3 EE8CBC9E886DDD89 2009-09-04 [self-signature] -sig!3 EE8CBC9E886DDD89 2018-08-06 [self-signature] -sub 74A941BA219EC810 -sig! EE8CBC9E886DDD89 2012-08-29 [self-signature] -sig! EE8CBC9E886DDD89 2014-08-31 [self-signature] -sig! EE8CBC9E886DDD89 2009-09-04 [self-signature] -sig! EE8CBC9E886DDD89 2018-08-06 [self-signature] -key EE8CBC9E886DDD89: -2 duplicate signatures removed -82 signatures not checked due to missing keys -gpg: key EE8CBC9E886DDD89: "deb.torproject.org archive signing key" not changed -gpg: Total number processed: 1 -gpg: unchanged: 1 -key EE8CBC9E886DDD89: -82 signatures not checked due to missing keys -OK -!!!!!! Please check if the above really worked! - -********************************************** -ALMOST READY -********************************************** - -Your SD Card Image for RaspiBlitz is almost ready. -Last step is to install LCD drivers. This will reboot your Pi when done. - -Maybe take the chance and look thru the output above if you can spot any errror. - -After final reboot - your SD Card Image is ready. - -IMPORTANT IF WANT TO MAKE A RELEASE IMAGE FROM THIS BUILD: -login once after reboot without HDD and run 'XXprepareRelease.sh' - -Press ENTER to install LCD and reboot ... - -sudo: raspi-config: command not found - - - - - - - - - - - - - - - - - - - - - - - - - - ┌──────────────────────────────────Display─────────────────────────────────────┐ - │ Are you using the default display available from Amazon? │ - │ Select 'No' if you are using the Swiss version from play-zone.ch! │ - ├──────────────────────────────────────────────────────────────────────────────┤ - │ < Yes > < No > │ - └──────────────────────────────────────────────────────────────────────────────┘ - - - - - - - - - - - - - - - - - - - - - - - - -E: Unable to locate package raspberrypi-bootloader -E: No packages found -Cloning into 'LCD-show'... -remote: Enumerating objects: 8, done. -remote: Counting objects: 100% (8/8), done. -remote: Compressing objects: 100% (8/8), done. -remote: Total 861 (delta 1), reused 0 (delta 0), pack-reused 853 -Receiving objects: 100% (861/861), 460.67 KiB | 306.00 KiB/s, done. -Resolving deltas: 100% (548/548), done. -cp: cannot create regular file '/boot/overlays/': Not a directory -cp: cannot create regular file '/boot/overlays/tft35a.dtbo': No such file or directory -cp: cannot create regular file '/usr/share/X11/xorg.conf.d/': Not a directory -this is not raspberrypi kernel, no need to update touch configure, reboot -Connection to 192.168.1.175 closed by remote host. -Connection to 192.168.1.175 closed. -openoms@buidl:~$ diff --git a/README.md b/README.md index 97232946d..ee2ebe141 100644 --- a/README.md +++ b/README.md @@ -3,7 +3,7 @@ ----- # DroidBlitz with DietPi -see: [/DietPi/install.md](/DietPi/install.md) +see: [install_on_DietPi.md](install_on_DietPi.md) # RaspiBlitz @@ -110,6 +110,7 @@ So open up a [terminal](https://www.youtube.com/watch?v=5XgBd6rjuDQ) and connect **Now follow the dialoge in your terminal. This can take some time (prepare some coffee) - but in the end you should have a running Lightning node on your RaspberryPi that you can start to learn and hack on.** + ## Documentation ### Setup Process diff --git a/home.admin/assets/lnd.service b/home.admin/assets/lnd.service index 79a40fdc7..578c0daaf 100644 --- a/home.admin/assets/lnd.service +++ b/home.admin/assets/lnd.service @@ -10,7 +10,7 @@ After=bitcoind.service [Service] EnvironmentFile= -ExecStart=/usr/local/bin/lnd --externalip=${publicIP} +ExecStart=/usr/local/bin/lnd PIDFile=/home/bitcoin/.lnd/lnd.pid User=bitcoin Group=bitcoin diff --git a/install_on_DietPi.md b/install_on_DietPi.md new file mode 100644 index 000000000..17500ea59 --- /dev/null +++ b/install_on_DietPi.md @@ -0,0 +1,42 @@ +Working with the ODroid HC1 and this image: https://dietpi.com/downloads/images/DietPi_OdroidXU4-ARMv7-Stretch.7z + +Getting started with DietPi: https://dietpi.com/phpbb/viewtopic.php?f=8&t=9#p9 + +Login to DietPi +username = root +password = dietpi +DietPi also comes pre-installed with Dropbear SSH Server. + +`ssh root@[IP-OF-DIETPI]` +password: `dietpi` +Ok > Cancel > Cancel +automatic apt update & apt upgrade on first logon and reboots +Opt out of survey > Ok > Ok + +`ssh root@[IP-OF-DIETPI]` + +@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ +@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ +@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + +run (copy from the terminal output): `ssh-keygen -f "/home/buidl/.ssh/known_hosts" -R "dietpi.IP"` + +`ssh root@[IP-OF-DIETPI]` +Ok > Install fail2ban > Install > Ok +Reboots again + +`ssh root@[IP-OF-DIETPI]` +Now only the bash prompt opens + +use: wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh [BRANCH] [GITHUB-USERNAME] + +`wget https://raw.githubusercontent.com/openoms/HardwareNode/OdroidHC1Debug/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh OdroidHC1Debug openoms` + +see my output: [sdcard_build_output](DietPi/sdcard_build_output) + +`ssh admin@[IP-OF-DROIDBLITZ]` +password: raspiblitz + +and continue as in the RaspiBlitz setup [README.md](README.md) + +