diff --git a/home.admin/00infoBlitz.sh b/home.admin/00infoBlitz.sh
index b21abb556..fca911ac8 100755
--- a/home.admin/00infoBlitz.sh
+++ b/home.admin/00infoBlitz.sh
@@ -326,7 +326,7 @@ ${color_yellow}               ${color_gray}${network^} Fullnode${LNinfo} ${torIn
 ${color_yellow}        ,/     ${color_yellow}%s
 ${color_yellow}      ,'/      ${color_gray}%s
 ${color_yellow}    ,' /       ${color_gray}%s, temp %s°C %s°F
-${color_yellow}  ,'  /_____   ${color_gray}Free Mem ${color_ram}${ram} ${color_gray} HDDuse ${color_hdd}%s${color_gray}
+${color_yellow}  ,'  /_____   ${color_gray}Free Mem ${color_ram}${ram} ${color_gray} HDD ${color_hdd}%s${color_gray}
 ${color_yellow},'_____    ,'  ${color_gray}SSH admin@${internet_localip}${color_gray} d${internet_rx} u${internet_tx}
 ${color_yellow}      /  ,'    ${color_gray}${webuiinfo} 
 ${color_yellow}     / ,'      ${color_gray}${network} ${color_green}${networkVersion}${color_gray}${chain}net ${networkConnectionsInfo}
diff --git a/home.admin/_background.scan.sh b/home.admin/_background.scan.sh
index 6ff8fec58..c1ad1eb25 100755
--- a/home.admin/_background.scan.sh
+++ b/home.admin/_background.scan.sh
@@ -268,6 +268,27 @@ do
     /home/admin/_cache.sh set internet_online "${online}"
   fi
 
+  ###################
+  # HARDDRIVE
+
+  if [ "${stillvalid}" == "0" ] || [ ${age} -gt ${MINUTE2} ]; then
+    echo "updating: /home/admin/config.scripts/blitz.datadrive.sh status"
+    source <(/home/admin/config.scripts/blitz.datadrive.sh status)
+    /home/admin/_cache.sh set hdd_mounted "${isMounted}"
+    /home/admin/_cache.sh set hdd_ssd "${isSSD}"
+    /home/admin/_cache.sh set hdd_btrfs "${isBTRFS}"
+    /home/admin/_cache.sh set hdd_raid "${isRaid}"
+    /home/admin/_cache.sh set hdd_uasp "${hddAdapterUSAP}"
+    /home/admin/_cache.sh set hdd_capacity_bytes "${hddBytes}"
+    /home/admin/_cache.sh set hdd_capacity_gb "${hddGigaBytes}"
+    /home/admin/_cache.sh set hdd_free_bytes "${hddDataFreeBytes}"
+    /home/admin/_cache.sh set hdd_free_gb "${hddDataFreeGB}"
+    /home/admin/_cache.sh set hdd_used_info "${hddUsedInfo}"
+    /home/admin/_cache.sh set hddTemperature "${hddTemperature}"
+    /home/admin/_cache.sh set hddTBSize "${hddTBSize}"
+    
+  fi
+
   # exit if still setup or higher system stopped
   source <(/home/admin/_cache.sh get setupPhase state)
   if [ "${setupPhase}" != "done" ] ||
@@ -296,25 +317,6 @@ do
   # read/update config values
   source /mnt/hdd/raspiblitz.conf
 
-  ###################
-  # HARDDRIVE
-
-  if [ "${stillvalid}" == "0" ] || [ ${age} -gt ${MINUTE2} ]; then
-    echo "updating: /home/admin/config.scripts/blitz.datadrive.sh status"
-    source <(/home/admin/config.scripts/blitz.datadrive.sh status)
-    /home/admin/_cache.sh set hdd_mounted "${isMounted}"
-    /home/admin/_cache.sh set hdd_ssd "${isSSD}"
-    /home/admin/_cache.sh set hdd_btrfs "${isBTRFS}"
-    /home/admin/_cache.sh set hdd_raid "${isRaid}"
-    /home/admin/_cache.sh set hdd_uasp "${hddAdapterUSAP}"
-    /home/admin/_cache.sh set hdd_capacity_bytes "${hddBytes}"
-    /home/admin/_cache.sh set hdd_capacity_gb "${hddGigaBytes}"
-    /home/admin/_cache.sh set hdd_free_bytes "${hddDataFreeBytes}"
-    /home/admin/_cache.sh set hdd_free_gb "${hddDataFreeGB}"
-    /home/admin/_cache.sh set hdd_used_info "${hddUsedInfo}"
-    /home/admin/_cache.sh set hdd_blockchain_data "${hddBlocksBitcoin}"
-  fi
-
   ###################
   # BITCOIN
 
diff --git a/home.admin/config.scripts/blitz.datadrive.sh b/home.admin/config.scripts/blitz.datadrive.sh
index 6c5c32055..7971a8231 100755
--- a/home.admin/config.scripts/blitz.datadrive.sh
+++ b/home.admin/config.scripts/blitz.datadrive.sh
@@ -209,16 +209,17 @@ if [ "$1" = "status" ]; then
     fi
 
     # try to detect if its an SSD
-    isSMART=$(sudo smartctl -a /dev/${hdd} | grep -c "Rotation Rate:")
+    isSMART=$(sudo smartctl -a /dev/${hdd} | grep -c "Serial Number:")
     echo "isSMART=${isSMART}"
-    if [ ${isSMART} -gt 0 ]; then
-      #detect using smartmontools (preferred)
-      isSSD=$(sudo smartctl -a /dev/${hdd} | grep 'Rotation Rate:' | grep -c "Solid State")
-    else
-      #detect using using fall back method
-      isSSD=$(cat /sys/block/${hdd}/queue/rotational 2>/dev/null | grep -c 0)
-    fi 
+    isSSD=1
+    isRotational=$(echo "${smartCtlA}" | grep -c "Rotation Rate:")
+    if [ ${isRotational} -gt 0 ]; then
+      isSSD=$(echo "${smartCtlA}" | grep "Rotation Rate:" | grep -c "Solid State Device")
+    fi
     echo "isSSD=${isSSD}"
+    hddTemp=""
+    echo "hddTemperature="
+    echo "hddTemperatureStr='?°C'"
 
     # display results from hdd & partition detection
     echo "hddCandidate='${hdd}'"
@@ -448,15 +449,16 @@ if [ "$1" = "status" ]; then
     fi
     echo "hddRaspiVersion='${hddRaspiVersion}'"
 
+    smartCtlA=$(sudo smartctl -a /dev/${hdd} | tr -d '"')
+
     # try to detect if its an SSD
-    isSMART=$(sudo smartctl -a /dev/${hdd} | grep -c "Rotation Rate:")
+    isSMART=$(echo "${smartCtlA}" | grep -c "Serial Number:")
     echo "isSMART=${isSMART}"
-    if [ ${isSMART} -gt 0 ]; then
-      #detect using smartmontools (preferred)
-      isSSD=$(sudo smartctl -a /dev/${hdd} | grep 'Rotation Rate:' | grep -c "Solid State")
-    else
-      #detect using using fall back method
-      isSSD=$(cat /sys/block/${hdd}/queue/rotational 2>/dev/null | grep -c 0)
+
+    isSSD=1
+    isRotational=$(echo "${smartCtlA}" | grep -c "Rotation Rate:")
+    if [ ${isRotational} -gt 0 ]; then
+      isSSD=$(echo "${smartCtlA}" | grep "Rotation Rate:" | grep -c "Solid State Device")
     fi
     echo "isSSD=${isSSD}"
 
@@ -465,6 +467,13 @@ if [ "$1" = "status" ]; then
     echo "hddCandidate='${hdd}'"
     echo "hddPartitionCandidate='${hddDataPartition}'"
 
+    # check temp if possible
+    hddTemp=$(echo "${smartCtlA}" | grep "^Temperature" | head -n 1 | grep -o '[0-9]\+')
+    if [ hddTemp = "" ]; then
+      hddTemp=$(echo "${smartCtlA}" | grep "^194" | tr -s ' ' | cut -d" " -f 10 | grep -o '[0-9]\+')
+    fi
+    echo "hddTemperature=${hddTemp}"
+
     # check if blockchain data is available
     hddBlocksBitcoin=$(ls /mnt/hdd/bitcoin/blocks/blk00000.dat 2>/dev/null | grep -c '.dat')
     echo "hddBlocksBitcoin=${hddBlocksBitcoin}"
@@ -482,6 +491,7 @@ if [ "$1" = "status" ]; then
       sizeDataPartition=$(lsblk -o NAME,SIZE -b | grep "${hddDataPartition}" | awk '$1=$1' | cut -d " " -f 2)
       hddGigaBytes=$(echo "scale=0; ${sizeDataPartition}/1024/1024/1024" | bc -l)
     fi
+    hddBytes=${sizeDataPartition}
     echo "hddBytes=${sizeDataPartition}"
     echo "hddGigaBytes=${hddGigaBytes}"
 
@@ -498,21 +508,36 @@ if [ "$1" = "status" ]; then
       datadrive=$(df -h | grep "/dev/${hdd}${nvp}1" | sed -e's/  */ /g' | cut -d" " -f 5)
       storageDrive=$(df -h | grep "/dev/${hdd}${nvp}2" | sed -e's/  */ /g' | cut -d" " -f 5)
       hdd_data_free1Kblocks=$(df -h -k /dev/${hdd}${nvp}1 | grep "/dev/${hdd}${nvp}1" | sed -e's/  */ /g' | cut -d" " -f 4 | tr -dc '0-9')
-      hddUsedInfo="${datadrive} & ${storageDrive}"
+      hddUsedInfo="${datadrive} ${storageDrive}"
     elif [ "${isZFS}" -gt 0 ]; then
       # ZFS calculations
       hdd_used_space=$(($(zpool list -pH | awk '{print $3}')/1024/1024/1024))
       hdd_used_ratio=$((100 * hdd_used_space / hddGigaBytes))
       hdd_data_free1Kblocks=$(($(zpool list -pH | awk '{print $4}') / 1024))
-      hddUsedInfo="${hdd_used_space} (${hdd_used_ratio}%)"
+      hddUsedInfo="${hdd_used_ratio}%"
     else
       # EXT4 calculations
       hdd_used_space=$(df -h | grep "/dev/${hddDataPartitionExt4}" | sed -e's/  */ /g' | cut -d" " -f 3  2>/dev/null)
       hdd_used_ratio=$(df -h | grep "/dev/${hddDataPartitionExt4}" | sed -e's/  */ /g' | cut -d" " -f 5 | tr -dc '0-9' 2>/dev/null)
       hdd_data_free1Kblocks=$(df -h -k /dev/${hddDataPartitionExt4} | grep "/dev/${hddDataPartitionExt4}" | sed -e's/  */ /g' | cut -d" " -f 4 | tr -dc '0-9')
-      hddUsedInfo="${hdd_used_space} (${hdd_used_ratio}%)"
+      hddUsedInfo="${hdd_used_ratio}%"
     fi
-    echo "hddUsedInfo='${hddUsedInfo}'"
+
+    hddTBSize="<1TB"
+    if [ ${hddBytes} -gt 800000000000 ]; then
+      hddTBSize="1TB"
+    fi
+    if [ ${hddBytes} -gt 1800000000000 ]; then
+      hddTBSize="2TB"
+    fi
+    if [ ${hddBytes} -gt 2300000000000 ]; then
+      hddTBSize=">2TB"
+    fi
+    if [ "${hddTemp}" != "" ]; then
+      hddUsedInfo="${hdd_used_ratio}% ${hddTemp}°C"
+    fi
+    echo "hddTBSize='${hddTBSize}'"
+    echo "hddUsedInfo='${hddTBSize} ${hddUsedInfo}'"
     hddDataFreeBytes=$((${hdd_data_free1Kblocks} * 1024))
     hddDataFreeGB=$((${hdd_data_free1Kblocks} / (1024 * 1024)))
     echo "hddDataFreeBytes=${hddDataFreeBytes}"
diff --git a/home.admin/config.scripts/blitz.debug.sh b/home.admin/config.scripts/blitz.debug.sh
index 4e076b484..243fff338 100755
--- a/home.admin/config.scripts/blitz.debug.sh
+++ b/home.admin/config.scripts/blitz.debug.sh
@@ -444,7 +444,9 @@ sudo du -sh /var/log
 
 echo
 echo "*** DATADRIVE ***"
+source <(sudo /home/admin/config.scripts/blitz.datadrive.sh status)
 sudo /home/admin/config.scripts/blitz.datadrive.sh status
+sudo smartctl -a /dev/${datadisk}
 echo
 
 echo "*** NETWORK ***"
diff --git a/home.admin/setup.scripts/eventInfoWait.sh b/home.admin/setup.scripts/eventInfoWait.sh
index 60d9194c4..65ae1d405 100644
--- a/home.admin/setup.scripts/eventInfoWait.sh
+++ b/home.admin/setup.scripts/eventInfoWait.sh
@@ -6,7 +6,7 @@
 source /home/admin/raspiblitz.info 2>/dev/null
 
 # get values from cache
-source <(/home/admin/_cache.sh get codeVersion internet_localip blitzapi)
+source <(/home/admin/_cache.sh get codeVersion internet_localip blitzapi hdd_used_info system_temp_celsius)
 
 # 1st PARAMETER: eventID
 # fixed ID string for a certain event
@@ -34,7 +34,7 @@ if [ "${mode}" != "lcd" ] && [ "${mode}" != "ssh" ]; then
 fi
 
 # default backtitle for dialog
-backtitle="RaspiBlitz ${codeVersion} / ${eventID} / ${internet_localip}"
+backtitle="${codeVersion} ${eventID} / ${internet_localip} ${system_temp_celsius}°C ${hdd_used_info}"
 
 ################################################
 # 1) WELL DEFINED EVENTS