raspiblitz/dietpi/dietpi.display.sh

# keep in mind that DietPi for Raspberry is also a stripped down Raspbian
echo "Detect Base Image ..." 
baseImage="?"
isDietPi=$(uname -n | grep -c 'DietPi')
isRaspbian=$(cat /etc/os-release 2>/dev/null | grep -c 'Raspbian')
if [ ${isRaspbian} -gt 0 ]; then
  baseImage="raspbian"
fi
if [ ${isDietPi} -gt 0 ]; then
  baseImage="dietpi"
fi
if [ "${baseImage}" = "?" ]; then
  cat /etc/os-release 2>/dev/null
  echo "!!! FAIL !!!"
  echo "Base Image cannot be detected or is not supported."
  exit 1
else
  echo "OK running ${baseImage}"
fi


if [ "${baseImage}" = "raspbian" ]; then
  echo "Press ENTER to install LCD and reboot ..."
  read key

  # give Raspi a default hostname (optional)
  sudo raspi-config nonint do_hostname "RaspiBlitz"

  # *** Display selection ***
  dialog --title "Display" --yesno "Are you using the default display available from Amazon?\nSelect 'No' if you are using the Swiss version from play-zone.ch!" 6 80
  defaultDisplay=$?

  if [ "${defaultDisplay}" = "0" ]; then

    # *** RASPIBLITZ / LCD (at last - because makes a reboot) ***
    # based on https://www.elegoo.com/tutorial/Elegoo%203.5%20inch%20Touch%20Screen%20User%20Manual%20V1.00.2017.10.09.zip
    
    echo "--> LCD DEFAULT"
    cd /home/admin/
    sudo apt-mark hold raspberrypi-bootloader
    git clone https://github.com/goodtft/LCD-show.git
    sudo chmod -R 755 LCD-show
    sudo chown -R admin:admin LCD-show
    cd LCD-show/
    sudo ./LCD35-show

  else

    # Download and install the driver
    # based on http://www.raspberrypiwiki.com/index.php/3.5_inch_TFT_800x480@60fps

    echo "--> LCD ALTERNATIVE"
    cd /boot
    sudo wget http://www.raspberrypiwiki.com/download/RPI-HD-35-INCH-TFT/dt-blob-For-3B-plus.bin
    sudo mv dt-blob-For-3B-plus.bin dt-blob.bin
    cat <<EOF >> config.txt

  dtparam=spi=off
  dtparam=i2c_arm=off

  # Set screen size and any overscan required
  overscan_left=0
  overscan_right=0
  overscan_top=0
  overscan_bottom=0
  framebuffer_width=800
  framebuffer_height=480


  enable_dpi_lcd=1
  display_default_lcd=1
  dpi_group=2
  dpi_mode=87
  dpi_output_format=0x6f015

  # set up the size to 800x480
  hdmi_timings=480 0 16 16 24 800 0 4 2 2 0 0 0 60 0 32000000 6

  #rotate screen
  display_rotate=3

  dtoverlay=i2c-gpio,i2c_gpio_scl=24,i2c_gpio_sda=23
  fi
EOF
    init 6
  fi
fi


if [ "${baseImage}" = "dietpi" ]; then

  OPTIONS=(GPIO "Install the default display available from Amazon" \
          HDMI "Install the 3.5\" HDMI display from Aliexpress" \
          SWISS "Install the Swiss version from play-zone.ch"
  )

  CHOICE=$(dialog --backtitle "RaspiBlitz - Display Install" --clear --title "Display Install" --menu "Choose a your diplay:" 10 70 6 "${OPTIONS[@]}" 2>&1 >/dev/tty)

  if [ "${CHOICE}" = "GPIO" ]; then
    echo "Installing the default display available from Amazon"

    # based on https://www.elegoo.com/tutorial/Elegoo%203.5%20inch%20Touch%20Screen%20User%20Manual%20V1.00.2017.10.09.zip
    cd /home/admin/
    #sudo apt-mark hold raspberrypi-bootloader
    git clone https://github.com/goodtft/LCD-show.git
    sudo chmod -R 755 LCD-show
    sudo chown -R admin:admin LCD-show
    cd LCD-show/
    # sudo ./LCD35-show
    sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
    sudo mkdir /etc/X11/xorg.conf.d
    sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/
    sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/tft35a.dtbo
    sudo cp -rf ./usr/99-calibration.conf-35  /etc/X11/xorg.conf.d/99-calibration.conf
    sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/
    sudo cp ./usr/cmdline.txt /DietPI/
    sudo cp ./usr/inittab /etc/
    sudo cp ./boot/config-35.txt /DietPi/config.txt
    echo "***"
    echo "reboot with \`sudo reboot\` to have the LCD working"
    echo "***"

    exit

  elif [ "${CHOICE}" = "HDMI" ]; then
    echo "Installing the 3.5\" HDMI display from Aliexpress"
    
    # based on http://www.lcdwiki.com/3.5inch_HDMI_Display-B
    git clone https://github.com/goodtft/LCD-show.git
    chmod -R 755 LCD-show
    cd LCD-show/
    #sudo ./MPI3508-show  
    sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
    sudo cp -rf ./boot/config-35-480X320.txt /DietPi/config.txt 
    sudo cp ./usr/cmdline.txt /DietPi/
    sudo cp ./usr/inittab /etc/
    sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf 
    sudo mkdir -p /etc/X11/xorg.conf.d 
    sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
    echo "***"
    echo "reboot with \`sudo reboot\` to have the LCD working"
    echo "***"

    exit

  elif [ "${CHOICE}" = "SWISS" ]; then

    # Download and install the driver
    # based on http://www.raspberrypiwiki.com/index.php/3.5_inch_TFT_800x480@60fps

    echo "--> LCD ALTERNATIVE"
    cd /DietPi
    sudo wget http://www.raspberrypiwiki.com/download/RPI-HD-35-INCH-TFT/dt-blob-For-3B-plus.bin
    sudo mv dt-blob-For-3B-plus.bin dt-blob.bin
    cat <<EOF >> config.txt

  dtparam=spi=off
  dtparam=i2c_arm=off

  # Set screen size and any overscan required
  overscan_left=0
  overscan_right=0
  overscan_top=0
  overscan_bottom=0
  framebuffer_width=800
  framebuffer_height=480


  enable_dpi_lcd=1
  display_default_lcd=1
  dpi_group=2
  dpi_mode=87
  dpi_output_format=0x6f015

  # set up the size to 800x480
  hdmi_timings=480 0 16 16 24 800 0 4 2 2 0 0 0 60 0 32000000 6

  #rotate screen
  display_rotate=3

  dtoverlay=i2c-gpio,i2c_gpio_scl=24,i2c_gpio_sda=23
  fi
EOF
    init 6
  fi 

else
  echo "CANCEL"
  exit
fi