lnd/contractcourt/htlc_timeout_resolver.go

package contractcourt

import (
	"encoding/binary"
	"fmt"
	"io"

	"github.com/btcsuite/btcd/wire"
	"github.com/lightningnetwork/lnd/lnwallet"
	"github.com/lightningnetwork/lnd/lnwire"
)

// htlcTimeoutResolver is a ContractResolver that's capable of resolving an
// outgoing HTLC. The HTLC may be on our commitment transaction, or on the
// commitment transaction of the remote party. An output on our commitment
// transaction is considered fully resolved once the second-level transaction
// has been confirmed (and reached a sufficient depth). An output on the
// commitment transaction of the remote party is resolved once we detect a
// spend of the direct HTLC output using the timeout clause.
type htlcTimeoutResolver struct {
	// htlcResolution contains all the information required to properly
	// resolve this outgoing HTLC.
	htlcResolution lnwallet.OutgoingHtlcResolution

	// outputIncubating returns true if we've sent the output to the output
	// incubator (utxo nursery).
	outputIncubating bool

	// resolved reflects if the contract has been fully resolved or not.
	resolved bool

	// broadcastHeight is the height that the original contract was
	// broadcast to the main-chain at. We'll use this value to bound any
	// historical queries to the chain for spends/confirmations.
	//
	// TODO(roasbeef): wrap above into definite resolution embedding?
	broadcastHeight uint32

	// htlcIndex is the index of this HTLC within the trace of the
	// additional commitment state machine.
	htlcIndex uint64

	// htlcAmt is the original amount of the htlc, not taking into
	// account any fees that may have to be paid if it goes on chain.
	htlcAmt lnwire.MilliSatoshi

	ResolverKit
}

// ResolverKey returns an identifier which should be globally unique for this
// particular resolver within the chain the original contract resides within.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) ResolverKey() []byte {
	// The primary key for this resolver will be the outpoint of the HTLC
	// on the commitment transaction itself. If this is our commitment,
	// then the output can be found within the signed timeout tx,
	// otherwise, it's just the ClaimOutpoint.
	var op wire.OutPoint
	if h.htlcResolution.SignedTimeoutTx != nil {
		op = h.htlcResolution.SignedTimeoutTx.TxIn[0].PreviousOutPoint
	} else {
		op = h.htlcResolution.ClaimOutpoint
	}

	key := newResolverID(op)
	return key[:]
}

// Resolve kicks off full resolution of an outgoing HTLC output. If it's our
// commitment, it isn't resolved until we see the second level HTLC txn
// confirmed. If it's the remote party's commitment, we don't resolve until we
// see a direct sweep via the timeout clause.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Resolve() (ContractResolver, error) {
	// If we're already resolved, then we can exit early.
	if h.resolved {
		return nil, nil
	}

	// If we haven't already sent the output to the utxo nursery, then
	// we'll do so now.
	if !h.outputIncubating {
		log.Tracef("%T(%v): incubating htlc output", h,
			h.htlcResolution.ClaimOutpoint)

		err := h.IncubateOutputs(
			h.ChanPoint, nil, &h.htlcResolution, nil,
			h.broadcastHeight,
		)
		if err != nil {
			return nil, err
		}

		h.outputIncubating = true

		if err := h.Checkpoint(h); err != nil {
			log.Errorf("unable to Checkpoint: %v", err)
			return nil, err
		}
	}

	// waitForOutputResolution waits for the HTLC output to be fully
	// resolved. The output is considered fully resolved once it has been
	// spent, and the spending transaction has been fully confirmed.
	waitForOutputResolution := func() error {
		// We first need to register to see when the HTLC output itself
		// has been spent by a confirmed transaction.
		spendNtfn, err := h.Notifier.RegisterSpendNtfn(
			&h.htlcResolution.ClaimOutpoint,
			h.htlcResolution.SweepSignDesc.Output.PkScript,
			h.broadcastHeight,
		)
		if err != nil {
			return err
		}

		select {
		case _, ok := <-spendNtfn.Spend:
			if !ok {
				return fmt.Errorf("notifier quit")
			}

		case <-h.Quit:
			return fmt.Errorf("quitting")
		}

		return nil
	}

	// With the output sent to the nursery, we'll now wait until the output
	// has been fully resolved before sending the clean up message.
	//
	// TODO(roasbeef): need to be able to cancel nursery?
	//  * if they pull on-chain while we're waiting

	// If we don't have a second layer transaction, then this is a remote
	// party's commitment, so we'll watch for a direct spend.
	if h.htlcResolution.SignedTimeoutTx == nil {
		// We'll block until: the HTLC output has been spent, and the
		// transaction spending that output is sufficiently confirmed.
		log.Infof("%T(%v): waiting for nursery to spend CLTV-locked "+
			"output", h, h.htlcResolution.ClaimOutpoint)
		if err := waitForOutputResolution(); err != nil {
			return nil, err
		}
	} else {
		// Otherwise, this is our commitment, so we'll watch for the
		// second-level transaction to be sufficiently confirmed.
		secondLevelTXID := h.htlcResolution.SignedTimeoutTx.TxHash()
		sweepScript := h.htlcResolution.SignedTimeoutTx.TxOut[0].PkScript
		confNtfn, err := h.Notifier.RegisterConfirmationsNtfn(
			&secondLevelTXID, sweepScript, 1, h.broadcastHeight,
		)
		if err != nil {
			return nil, err
		}

		log.Infof("%T(%v): waiting second-level tx (txid=%v) to be "+
			"fully confirmed", h, h.htlcResolution.ClaimOutpoint,
			secondLevelTXID)

		select {
		case _, ok := <-confNtfn.Confirmed:
			if !ok {
				return nil, fmt.Errorf("quitting")
			}

		case <-h.Quit:
			return nil, fmt.Errorf("quitting")
		}
	}

	// TODO(roasbeef): need to watch for remote party sweeping with pre-image?
	//  * have another waiting on spend above, will check the type, if it's
	//    pre-image, then we'll cancel, and send a clean up back with
	//    pre-image, also add to preimage cache

	log.Infof("%T(%v): resolving htlc with incoming fail msg, fully "+
		"confirmed", h, h.htlcResolution.ClaimOutpoint)

	// At this point, the second-level transaction is sufficiently
	// confirmed, or a transaction directly spending the output is.
	// Therefore, we can now send back our clean up message.
	failureMsg := &lnwire.FailPermanentChannelFailure{}
	if err := h.DeliverResolutionMsg(ResolutionMsg{
		SourceChan: h.ShortChanID,
		HtlcIndex:  h.htlcIndex,
		Failure:    failureMsg,
	}); err != nil {
		return nil, err
	}

	// Finally, if this was an output on our commitment transaction, we'll
	// for the second-level HTLC output to be spent, and for that
	// transaction itself to confirm.
	if h.htlcResolution.SignedTimeoutTx != nil {
		log.Infof("%T(%v): waiting for nursery to spend CSV delayed "+
			"output", h, h.htlcResolution.ClaimOutpoint)
		if err := waitForOutputResolution(); err != nil {
			return nil, err
		}
	}

	// With the clean up message sent, we'll now mark the contract
	// resolved, and wait.
	h.resolved = true
	return nil, h.Checkpoint(h)
}

// Stop signals the resolver to cancel any current resolution processes, and
// suspend.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Stop() {
	close(h.Quit)
}

// IsResolved returns true if the stored state in the resolve is fully
// resolved. In this case the target output can be forgotten.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) IsResolved() bool {
	return h.resolved
}

// Encode writes an encoded version of the ContractResolver into the passed
// Writer.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Encode(w io.Writer) error {
	// First, we'll write out the relevant fields of the
	// OutgoingHtlcResolution to the writer.
	if err := encodeOutgoingResolution(w, &h.htlcResolution); err != nil {
		return err
	}

	// With that portion written, we can now write out the fields specific
	// to the resolver itself.
	if err := binary.Write(w, endian, h.outputIncubating); err != nil {
		return err
	}
	if err := binary.Write(w, endian, h.resolved); err != nil {
		return err
	}
	if err := binary.Write(w, endian, h.broadcastHeight); err != nil {
		return err
	}

	if err := binary.Write(w, endian, h.htlcIndex); err != nil {
		return err
	}

	return nil
}

// Decode attempts to decode an encoded ContractResolver from the passed Reader
// instance, returning an active ContractResolver instance.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Decode(r io.Reader) error {
	// First, we'll read out all the mandatory fields of the
	// OutgoingHtlcResolution that we store.
	if err := decodeOutgoingResolution(r, &h.htlcResolution); err != nil {
		return err
	}

	// With those fields read, we can now read back the fields that are
	// specific to the resolver itself.
	if err := binary.Read(r, endian, &h.outputIncubating); err != nil {
		return err
	}
	if err := binary.Read(r, endian, &h.resolved); err != nil {
		return err
	}
	if err := binary.Read(r, endian, &h.broadcastHeight); err != nil {
		return err
	}

	if err := binary.Read(r, endian, &h.htlcIndex); err != nil {
		return err
	}

	return nil
}

// AttachResolverKit should be called once a resolved is successfully decoded
// from its stored format. This struct delivers a generic tool kit that
// resolvers need to complete their duty.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) AttachResolverKit(r ResolverKit) {
	h.ResolverKit = r
}

// A compile time assertion to ensure htlcTimeoutResolver meets the
// ContractResolver interface.
var _ ContractResolver = (*htlcTimeoutResolver)(nil)