This commit introduces a new type, `BlindedPaymentPathSet`. For now, it
holds only a single `BlindedPayment` but eventually it will hold and
manage a set of blinded payments provided for a specific payment. To
make the PR easier to follow though, we start off just letting it hold a
single one and do some basic replacements.
This commit introduces more sophisticated code for selecting dummy hop
policy values for dummy hops in blinded paths.
For the case where the path does contain real hops, the dummy hop policy
values are derived by taking the average of those hop polices. For the
case where there are no real hops (in other words, we are the
introduction node), we use the default policy values used for normal
ChannelUpdates but then for the MaxHTLC value, we take the average of
all our open channel capacities.
Expose the ability to add blinded paths to an invoice. Also expose
various configuration values.
We also let the lncfg.Invoices struct satisfy the Validator interface so
that we can verify all its config values in one place.
Here we add a new `Blind` option to the `AddInvoiceData` which will
signal that the new invoice should encode a blinded route.
Certain other changes are also made in the case that this invoice
contains a blinded route:
1) the payment address/secret no longer needs to be in the invoice
itself since it will be put in the `PathID` recored of the encrypted
recipient record for our hop.
2) When we sign the invoice, we now use an ephemeral key since we dont
want the sender to be able to derive our real node pub key from the
invoice signature.
3) The invoice's FinalCLTV field should be zero for blinded invoices
since the CLTV delta info will be communicated in the accumulated
route policy values.
This commit adds all the logic for building a blinded path (from a given
route) and packaging it up in a zpay32.BlindedPaymentPath struct so that
it is ready for adding to an invoice. It also includes logic for padding
a path with dummy hops.
Note that in this commit, the logic for choosing an actual path to us
that can then be used in a blinded path is abstracted away. This logic
will be fleshed out in a future commit.
This commit adds a helper function that will be used to adjust a hops
policy values by certain given increase and decrease multipliers. This
will be used in blinded paths to give policy values some buffer to avoid
easy probing of blinded paths.
This commit adds a function that can be used to compute the accumulated
path policy for a blinded path as defined in the spec:
db278ab9b2/04-onion-routing.md (L255)
This commit adds a helper function called `padHopInfo` along with a test
for it. This function will be used later on when building a blinded
path. It is used to ensure that all encrypted blobs of a blinded path
that we construct are padded to the same size.
This commit adds a blinded_paths field to the PayReq proto message. A
new helper called `CreateRPCBlindedPayments` is then added to convert
the zpay32 type to the existing `lnrpc.BlindedPaymentPath` type and add
this to the `PayReq` in the `DecodePayReq` rpc method.
In this commit we set up the payment loop context
according to user-provided parameters. The
`cancelable` parameter indicates whether the user
is able to interrupt the payment loop by cancelling
the server stream context. We'll additionally wrap
the context in a deadline if the user provided a
payment timeout.
We remove the timeout channel of the payment_lifecycle.go
and in favor of the deadline context.
Previously the error message produced when `CltvExpiry` is less
than the minimum final cltv (18 at present) set by
`routing.MinCLTVDelta` inserted the values into the wrong spots of the
formatted string.
Fixes the problem that inbound base fee and fee rate are overwritten
with 0 if they are not specified in PolicyUpdateRequest. This ensures
backward compatibility with older rpc clients that do not yet support
the inbound feature.
In this commit, we fix an inconsistent in the API related to AMP
payments. When a payment request isn't specified, we require the `--amp`
flag on the CLI to make an AMP payment. However, for payment requests,
we don't require this flag. To fix this inconsistency, we now require
the `--amp` flag to _also_ be set for payment requests.
This commit exports and renames the following variable names:
- `PendingInput` is now `PendingInputResponse` as it's responding to a
request.
- `pendingInput` is now renamed and exported as `SweeperInput`.
- `pendingInputs` is now renamed and exported as `InputsMap`.
This commit is first made from running:
```
gofmt -d -w -r 'PendingInput -> PendingInputResponse' .
gofmt -d -w -r 'pendingInput -> SweeperInput' .
gofmt -d -w -r 'pendingInputs -> InputsMap' .
```
And followed by some docs and variable names fixes.
This commit removes the logic where we remove an input when it's been
published more than 10 times. This is needed as in our future fee
bumper, we might start with a low fee and rebroadcast the same input for
hundred of blocks.
This commit adds a new interface `FeePreference` which makes it easier
to write unit tests and allows more customized implementation in
following commits.
This commit moves `DetermineFeePerKw` into the `Estimate` method on
`FeePreference`. A few callsites previously calling `DetermineFeePerKw`
without the max fee rate is now also temporarily fixed by forcing them
to use `Estimate` with the default sweeper max fee rate.
In this commit, we add the coin selection strategy option to the following
on-chain RPCs `fundpsbt`, `batchopenchannel`, `estimatefee`, `sendcoins`,
`sendmany`, and `sendoutputs`.
In this commit, we add the coin selection strategy option
to all on-chain RPCs `FundPsbt`, `BatchOpenChannel`, `EstimateFee`,
`SendMany`, `SendCoins`, `SendOutputs`.
In this commit, the tlv extension of a channel update message is parsed.
If an inbound fee schedule is encountered, it is reported in the
graph rpc calls.
This field is incorrectly suffixed as "msat", when it is actually
interpreted as the proportional fee rate. This is the value that we
should be using because the sender will calculate proportional fees
accordingly. This is a breaking change to the RPC, but on an
experimental and unreleased API.
This commit moves the constants LndInternalLockID and
DefaultLockDuration from the walletrpc package to the chanfunding
package, moves DefaultReservationTimeout from lncfg to chanfunding,
and also updates the lncli package with the new location.
In this commit the mission control based fee estimation
is supplemented with a payment probe estimation which can
lead to more accurate estimation results. The probing
utilizes a hop-hint heurisic to detect routes through LSPs
in order to manually estimate fees to destinations behind
an LSP that would otherwise block the payment probe.
For the itest in the next commit we'll need to be able to fetch the
input information for an address over RPC. The only piece missing is the
address' index, which we add in this commit. Everything else should be
derivable from the ListAddresses and ListAccounts calls.
In some situations (for example in Taproot Assets), we need to be able
to prove that an address is a bare BIP-0086 address that doesn't commit
to any script. We can do that by providing the BIP-0032 derivation info
and internal key.
In the following commits we'll add a new, third, funding option for
funding PSBTs: It will allow users to specify pre-selected inputs but
still request the wallet to perform coin selection up to the total
output sum amount.
Since we have two other examples of XArbitrator, we rename
BreachArbiter to BreachArbitrator to keep things consistent.
The aim is to reduce the amount of lore you need to know to
intuit where things are or what they do.
The final hop size is calculated differently therefore we extract
the logic in its own function and also account for the case where
the final hop might be a blinded hop.
In the previous commit the AdditionalEdge interface was introduced
with both of its implementations `BlindedEdge` and `PrivateEdge`.
In both cases where we append a route either by a blinded route
section or private route hints we now use these new types. In
addition the `PayloadSizeFunc` type is introduced in the
`unifiedEdge` struct. This is necessary to have the payload size
function at hand when searching for a route hence not overshooting
the max sphinx package size of 1300 bytes.
By default ListSweeps will list all sweeps known to the wallet. Over
time this may become expensive to call and callers may not be interested
in the full history. This commit adds a `startheight` parameter to the
`ListSweeps` RPC call. This parameter can be used to fetch sweeps only
from a specified start block height or only unconfirmed ones if it is
set to -1.
We do things this way to keep behavior consistent across REST, gRPC
and CLI consistent. This was done to not alter the way we handle
Recv calls from the streams.
This PR addresses the following:
- Install and Configure protolint to enforce the protobuf style guide rules in the CI.
- Fix the protolinting issues (package and import ordering) while maintaining the comaptibility.
