This commit adds a new config method `QueryIncomingCircuit` that can be
used to query the payment's incoming circuit for giving its outgoing
circuit key.
`IncubateOutputs` never takes more than one HTLC, so we change the
params to be optional, which helps with the following commit where we
pass the deadline height when incubating outgoing HTLCs.
This commit changes `findCommitmentDeadline` to
`findCommitmentDeadlineAndValue` to calculate the value left from all
the time-sensitive HTLCs after subtracting their budgets. This value is
then used to calculate the budget to be used when sweeping the anchor
output.
Since we have two other examples of XArbitrator, we rename
BreachArbiter to BreachArbitrator to keep things consistent.
The aim is to reduce the amount of lore you need to know to
intuit where things are or what they do.
In this commit, update the start up logic to gracefully handle a
seemingly rare case. In this case, a peer detects local data loss with a
set of active HTLCs. These HTLCs then eventually expire (they may or may
not actually "exist"), causing a force close decision. Before this PR,
this attempt would fail with a fatal error that can impede start up.
To better handle such a scenario, we'll now catch the error when we fail
to force close due to entering the DLP and instead terminate the state
machine at the broadcast state. When a commitment transaction eventually
confirms, we'll play it as normal.
Fixes https://github.com/lightningnetwork/lnd/issues/7984
Add a test where the channel arbitrator starts up correctly
when a prior unilateral close of a channel did not broadcast
for specific reasons.
Also add a test which ensures that when a crib output is
rejected by the bitcoin backend the startup works correctly
for specific errors.
The main idea is that NotifyContractUpdate adds the ContractUpdate to
a map called unmerged. It is populated in Start by shallow-copying the
activeHTLCs map values (htlcSet). The htlcSets underlying maps are not
copied, and so unmerged will just contain pointers to them. This should
be fine since unmerged will not modify them. At the call-sites of
activeHTLCs, it is updated to include the unmerged sets. This happens
with a mutex and should not cause any data race, even though it is
copying the underlying map pointers. No persistence should be
necessary since on restart, activeHTLCs and unmerged will just be
populated again.
This commit was previously split into the following parts to ease
review:
- 2d746f68: replace imports
- 4008f0fd: use ecdsa.Signature
- 849e33d1: remove btcec.S256()
- b8f6ebbd: use v2 library correctly
- fa80bca9: bump go modules
This also changes the chain_watcher and breacharbiter handoff. The
new logic ensures that the channel is only marked as pending closed
when the channel arbitrator has persisted the resolutions and commit
set.
In order to sweep the commitment and HTLC outputs belonging to a
script-enforced leased channel, each resolver must know whether the
additional CLTV clause on the channel initiator applies to them. To do
so, we retrieve the historical channel state stored within the database
and supplement it to the resolvers to provide them with what's needed in
order to sweep the necessary outputs and resolve their respective
contracts.
In this commit, we take an initial step towards converting the existing
breach arbiter and utxo nursery logic into contract resolvers by moving
the files as is, into the `contractcourt` pacakge.
This commit is primarily move only, though we had to massage some
interfaces and config names along the way to make things compile and the
tests run properly.
This commit adds two tests to check that a) the correct deadline is used
given different HTLC sets and b) when sweeping anchors the correct
deadlines are used.
This commit adds a deadline field to mockSweeper that can be used to
track the customized conf target (deadline) used for sweeping anchors.
The relevant test, TestChannelArbitratorAnchors is updated to reflect
that the deadlines are indeed taking effect.
This commit adds a new struct AnchorResolutions which wraps the anchor
resolutions for local/remote/pending remote commitment transactions. It
is then returned from NewAnchorResolutions. Thus the caller knows how to
retrieve a certain anchor resolution.
* mod: bump btcwallet version to accept db timeout
* btcwallet: add DBTimeOut in config
* kvdb: add database timeout option for bbolt
This commit adds a DBTimeout option in bbolt config. The relevant
functions walletdb.Open/Create are updated to use this config. In
addition, the bolt compacter also applies the new timeout option.
* channeldb: add DBTimeout in db options
This commit adds the DBTimeout option for channeldb. A new unit
test file is created to test the default options. In addition,
the params used in kvdb.Create inside channeldb_test is updated
with a DefaultDBTimeout value.
* contractcourt+routing: use DBTimeout in kvdb
This commit touches multiple test files in contractcourt and routing.
The call of function kvdb.Create and kvdb.Open are now updated with
the new param DBTimeout, using the default value kvdb.DefaultDBTimeout.
* lncfg: add DBTimeout option in db config
The DBTimeout option is added to db config. A new unit test is
added to check the default DB config is created as expected.
* migration: add DBTimeout param in kvdb.Create/kvdb.Open
* keychain: update tests to use DBTimeout param
* htlcswitch+chainreg: add DBTimeout option
* macaroons: support DBTimeout config in creation
This commit adds the DBTimeout during the creation of macaroons.db.
The usage of kvdb.Create and kvdb.Open in its tests are updated with
a timeout value using kvdb.DefaultDBTimeout.
* walletunlocker: add dbTimeout option in UnlockerService
This commit adds a new param, dbTimeout, during the creation of
UnlockerService. This param is then passed to wallet.NewLoader
inside various service calls, specifying a timeout value to be
used when opening the bbolt. In addition, the macaroonService
is also called with this dbTimeout param.
* watchtower/wtdb: add dbTimeout param during creation
This commit adds the dbTimeout param for the creation of both
watchtower.db and wtclient.db.
* multi: add db timeout param for walletdb.Create
This commit adds the db timeout param for the function call
walletdb.Create. It touches only the test files found in chainntnfs,
lnwallet, and routing.
* lnd: pass DBTimeout config to relevant services
This commit enables lnd to pass the DBTimeout config to the following
services/config/functions,
- chainControlConfig
- walletunlocker
- wallet.NewLoader
- macaroons
- watchtower
In addition, the usage of wallet.Create is updated too.
* sample-config: add dbtimeout option
To allow us to grab all of the information we need for our channel arbs
in a more efficient way on startup, we add an optional tx to our lookup
functions required on start.
The sweeper call UpdateParams does not update the exclusive group
property of a pending sweep. This led to anchor outputs being swept
after confirmation with an exclusive group restriction, which is not
necessary.
This commit changes the anchor resolver to not use UpdateParams anymore,
but instead always re-offer the anchor input to the sweeper. The sweeper
is modified so that a re-offering also updates the sweep parameters.
To allow us to write the outcome of our resolver to disk, we add
optional resolver reports to the CheckPoint function. Variadic params
are used because some checkpoints may have no reports (when the resolver
is not yet complete) and some may have two (in the case of a two stage
resolution).
Add label parameter to PublishTransaction in WalletController
interface. A labels package is added to store generic labels that are
used for the different types of transactions that are published by lnd.
To keep commit size down, the two endpoints that require a label
parameter be passed down have a todo added, which will be removed in
subsequent commits.
Sweeping anchors and being able to bump the fee was already added in a
previous commit. This commit extends anchor sweeping with an anchor
resolver object that becomes active after the commitment tx confirms.
At that point, the anchors do not serve the purpose of getting the
commitment tranaction confirmed anymore. It is however still possible to
reclaim some of their value if using a low fee rate.
Start anchor sweep attempts immediately after the commitment transaction
has been published. This makes the anchor known to the sweeper and
allows the user to bump the fee on it to get their commitment
transaction confirmed in case the fee committed too is insufficient for
timely confirmation.
This commit adds two new channel statuses which indicate the party that
initatited closing the channel. These statuses are set in conjunction
with the existing commit broadcast status so that we do not need to
migrate existing logic to handle multiple types of closes. This status
is set for locally initiated force closes in this commit because they
follow a similar pattern to cooparative closes, marking the commitment
broadcast then proceeding with tx broadcast. Remote force closes are
added in the following commit, as they are handled differently.
This commit enables the user to specify he is not interested in
automatically close channels with pending payments that their
corresponding htlcs have timed-out.
By requiring a configurable grace period uptime of our node
before closing such channels, we give a chance to the other node to
properly cancel the htlc and avoid unnecessary on-chain transaction.
In mobile it is very important for the user experience as otherwise
channels will be force closed more frequently.
With the introduction of additional payload fields for mpp, it becomes
a necessity to have their values available in the on-chain resolution
flow. The incoming contest resolver notifies the invoice registry of the
arrival of a payment and needs to supply all parameters for the registry
to validate the htlc.
