In this commit, we add a new NewCommitState struct. This preps us for
the future change wherein a partial signature is also added to the mix.
All related tests and type signatures have also been updated
accordingly.
In this commit, we update the Sig type to support ECDSA and schnorr
signatures. We need to do this as the HTLC signatures will become
schnorr sigs for taproot channels. The current spec draft opts to
overload this field since both the sigs are actually 64 bytes in length.
The only consideration with this move is that callers need to "coerce" a
sig to the proper type if they need schnorr signatures.
In this commit, the NewBreachRetribution function is adjusted so that a
caller can optionally set the spendTx parameter to nil. In this case,
the function will check the revocation log to see if the local and
remote amount fields are available there and use them if they are.
If the fields are not present, which they might not be given a previous
migration that removed the fields, then an error is returned.
This commit changes the `NewBreachRetribution` to use the new revocation
log format, while maintaining the compatibilty to use an older
revocation log format. Unit tests have been added to make sure a breach
retribution can be created in both log formats.
This also means the watch tower needs to pass the relevant commit tx at
its backup height when creating the breach retribution during backing
up. This is achieved by recording the current remote commitment state
before advancing the remote commitment chain.
This commit was previously split into the following parts to ease
review:
- 2d746f68: replace imports
- 4008f0fd: use ecdsa.Signature
- 849e33d1: remove btcec.S256()
- b8f6ebbd: use v2 library correctly
- fa80bca9: bump go modules
Pass htlc amount down to the channel so that we don't need to rely
on minHtlc (and pad it when the channel sets a 0 min htlc). Update
test to just check some sane values since we're no longer relying
on minHtlc amount at all.
The validateFeeRate function uses the availableBalance function to get
the current spendable balance of a channel, adds the old fee and then
ensures that the new fee is not larger than the amount we have available
to spend. This commit also removes the local reserve check in the
validateFeeRate function since the balance returned from
availableBalance already takes the local reserve into acccount.
In this commit we ensure that the max fee calculated in the MaxFeeRate
function takes the local reserve amount into account along with any
pending HTLCs. This is done by calling the avaialbeBalance function.
It over-estimates the local or remote commitment's dust sum by
counting all updates in both updateLogs that are dust using the
trimmed-to-dust mechanism if applicable. The over-estimation is done
because ensuring an accurate counting is a trade-off between code
simplicity and accuracy.
Adds a method to the LightningChannel struct called IsChannelClean
that returns a boolean telling the caller whether the channel state
is clean or not. Clean in this case means there are no lingering
updates to be signed for, no HTLC's active on either sides commitment
transaction, and no pending commitments on either side. This can be
used for dynamic commitments or during a strict cooperative close
process that ensures atomicity of the channel.
As is, if the remote party proposes a min HTLC of 0 `mSat` to us, then
we won't ever be able to _send outgoing_ in the channel as the
`MayAddOutgoingHtlc` will attempt to add a zero-value HTLC, which isn't
allowed within the protocol.
The default channels created actually already use a min HTLC value of
zero within the tests, so this test case fails as is.
This commit adds a new struct AnchorResolutions which wraps the anchor
resolutions for local/remote/pending remote commitment transactions. It
is then returned from NewAnchorResolutions. Thus the caller knows how to
retrieve a certain anchor resolution.
Messages:
- UpdateFulfillHTLC
- UpdateFee
- UpdateFailMalformedHTLC
- UpdateFailHTLC
- UpdateAddHTLC
- Shutdown
- RevokeAndAck
- ReplyShortChanIDsEnd
- ReplyChannelRange
- QueryShortChanIDs
- QueryChannelRange
- NodeAnnouncement
- Init
- GossipTimestampRange
- FundingSigned
- FundingLocked
- FundingCreated
- CommitSig
- ClosingSigned
- ChannelUpdate
- ChannelReestablish
- ChannelAnnouncement
- AnnounceSignatures
lnwire: update quickcheck tests, use constant for Error
multi: update unit tests to pass deep equal assertions with messages
In this commit, we update a series of unit tests in the code base to now
pass due to the new wire message encode/decode logic. In many instances,
we'll now manually set the extra bytes to an empty byte slice to avoid
comparisons that fail due to one message having an empty byte slice and
the other having a nil pointer.
This commit caps the update fee the initiator will send when the anchors
channel type is used. We do not limit anything on the receiver side.
10 sat/vbyte is the current default max fee rate we use. This should be
enough to ensure propagation before anchoring down the commitment
transaction.
Similar to the previous commit, we fix a bug resulting in the wrong
commit weight being calculated when an HTLC just above the remote's
duslimit was added from the remote. This was a result of using the
successFee instead of the timeoutFee when checking whether it was dust,
making us consider it dust when it shouldn't have been.
In this commit we fix a bug resulting in the wrong commit weight being
calculated when an HTLC just below the remote's duslimit was added. This
was a result of using the timeoutFee instead of the successFee when
checking whether it was dust, making us consider it non-dust when it
should have been.
To be spec compliant, we require the initiator to not pay the anchor
values into fees on coop close. We extract the balance calculation into
commitment.go, and add back the value of the anchors to the initiator's
balance.
This commit includes a regression test that checks that we remember
to restore updates that we sent to the peer but they haven't sent
us a signature for yet.
This commit moves the deletion of all updates under the unsigned
acked updates key from AppendRemoteCommitChain to
AdvanceCommitChainTail. This is done because if we went down after
signing for these updates but before receiving a revocation, we would
incorrectly reject their commitment signature:
Alice Bob
-----add----->
-----sig----->
<----rev------
<----sig------
-----rev----->
<----fail-----
<----sig------
-----rev----->
-----sig----->
*reconnect*
<----rev------
<----add------
x----sig------
It is also important to note that filtering is required when we
receive a revocation to ensure that we aren't erroneously deleting
remote updates. Take the following state transitions:
Alice Bob
-----add----->
-----sig----->
<----rev------
<----sig------
-----rev----->
-----add----->
-----sig----->
<----fail-----
<----sig------
-----rev-----> (alice stores updates here)
<----rev------
In the above case, if Alice deleted all updates rather than filtering
when receiving the final revocation from Bob, then Alice would have
to force close the channel due to missing updates. Since Alice hasn't
signed for any of the unsigned acked updates, she should not filter any
of them out.
The `restoreStateLogs` function now properly restores the
`addCommitHeightLocal` field of a settle or fail's parent add.
Previously, any updates' parent in unsignedAckedUpdates would have
the field set to the default value of 0. This would cause a force
closure when receiving a commitment due to our belt-and-suspenders
checks for update logs during commitment validation.
The bug in question occurs because the `addCommitHeightLocal` field
is only populated for a restored add if the add is on the local
commitment. `TestChannelRestoreCommitHeight` is expanded in
`lnwallet/channel_test.go` to demonstrate restoration now works.
The faulty state transition:
```
<----fail----
<----sig-----
-----rev----> (add no longer on Alice's commitment)
*Alice restores* (addCommitHeightLocal of failed htlc is 0)
```
NOTE: Alice dies after sending a revocation but before signing a
commitment. This is possible because there is a select block in the link
that can potentially exit after sending over the revocation but before
signing the next commitment state for the counterparty.
This enforces the _actualized_ fee rate of the commitment transaction,
rather than the fee floor used for estimation. The new value of 250
sat/kw corresponds to 1 sat/byte, rather than 253 which is only rounded
up during estimation to account for the fact that BOLT 3 rounds down to
the nearest satoshi and that the vbyte fee estimation is lossy.
Previously we would incorrectly fail to sign the next commitment even
though the fee was technically high enough. Restarting with this commit
should solve the issue as long as the channel hasn't already gone to
chain.
This commit adds an additional santity check that rejects zero-value
HTLCs, preventing them from being added to the channel state even if the
channel config's minhtlc value is zero.
This commit adds a test to exercise that HTLC signatures are sent in the
correct order, i.e. they match the sorting of the HTLC outputs on the
commitment after applying BOLT 3's BIP69+CLTV sort.
Since our HTLC must also be added to the remote commitment, we do the
balance caluclation also from the remote chain perspective and report
our minimum balance from the two commit views as our available balance.
When we send non-dust HTLCs as the non-initiator, the remote party will
have to pay the extra commitment fee. To account for this we figure out
if they can afford paying this fee, if not we report that we only have
balance available for dust HTLCs, since these HTLCs won't increase the
commitment fee.
Since we want to handle the edge case where paying the HTLC fee would
take the initiator below the reserve, we move the subtraction of the
reserve into availableBalance where this calculation will be performed.
