This fixeslightninglabs/loop#437 by adding all accounts that are used
in liquidity products such as Loop or Pool. Since both of these products
use key families below 255, we can get by with that number.
The alternative to creating way too many accounts (which increases the
default wallet size by ~250kB) would be to hard code the exact accounts
used by Loop (99) and Pool (210). But that sounds like a bad idea given
that there could always be more accounts being added to those (or other)
products. By making sure the first 255 accounts exist, we have a lot
more flexibility in those products for choosing key families.
With the remote signing instance now not needing to know anything about
addresses or current derivation indices, we don't need to forward any
such calls to that instance and can simplify the RPCKeyRing
considerably.
This adds an integration test that makes sure channel can be funded from
empty wallet using PSBT if the funding transaction contains an output
belonging to the wallet, satisfying the reserve.
This commit removes the context as a param needed when calling methods
of HarnessNode. This change moves the context management inside
HarnessNode, aside from saving us a few lines, it makes the context
creation/timeout less error-prone.
This commit adds a unique request ID that is the same for each gRPC
request and response intercept message or each request/response message
of a gRPC stream.
This commit adds a new unique intercept message ID that is different for
each message sent to an RPC middleware. This will allow us to re-purpose
the existing request ID field into its original intention, which was to
have a unique ID for a full gRPC request/response pair or gRPC stream as
a whole.
It looks like in some cases a channel is still being closed while we
already try to create a sweep output. In that case the pending closed
channel is still counted as anchor channel and a reserve output is
created. To make sure that doesn't happen, we make sure there are no
pending or open channels of any kind around before we create the sweep
transaction.
The testing framework uses runtime.Goexit() when a test fails which
still allows the defer calls to execute. That's why we should use defer
to close the done channel to allow all goroutines to exit properly.
We update several of our integration tests that exercise different
scenarios with regards to the broadcast of a channel commitment
transaction with HTLCs in-flight to use the new commitment type for
channel leases. We do this to ensure we have complete coverage of said
channel commitment type. This required changing several assumptions
throughout the tests based on when we should expect sweeps to happen.
We now redirect the mineBlocks function to the mineBlocksSlow function
which waits after each mined block. To reduce the overall time impact of
using that function everywhere, we only wait 20 milliseconds instead of 50ms
after each mined block to give all nodes
some time to process the block. This will still slow down everything by a bit
but reduce flakes that are caused by different sub systems not being
up-to-date.
In this commit, a subscription is made to topology updates. For any
NodeAnnouncements received for our peristent peers, we store their newly
advertised addresses. If at the time of receiving these new addresses
there are any existing connection requests, these are updated to reflect
the newly advertised addresses.
In this commit we demonstrate a bug to show that if an inbound peer
changes their listening address to one not advertised in their original
NodeAnnouncement then we will not be able to reconnect to them. This bug
will be fixed in a follow-up commit.
This commit adds an itest to demonstrate that if a peer advertises
multiplie external IP addresses, then they will not all be used to
reconnect to the peer during reconnection. This will be fixed in a
follow-up commit.
The assertNumConnection function currently takes in an 'expected' number
of connections argument and asserts that both alice and bob only each
only have that number of connections. So this fails to be useful if say
alice is also connected to charlie cause then if we call
assertNumConnections between alice and bob it will fail saying there are
2 connections between them since all it does is count alice's total
number of connections. This commit replaces this function with 2 new
functions: assertConnected which asserts that at least one connection
exists between two peers and assertNotConnected which asserts that no
connections exists between the two peers.
With go 1.17 a change to the build flags was implemented:
https://go.googlesource.com/proposal/+/master/design/draft-gobuild.md
The formatter now automatically adds the forward-compatible build tag
format and the linter checks for them, so we need to include them in our
code.
This commit updates call-sites to use the proper dust limits for
various script types. This also updates the default dust limit used
in the funding flow to be 354 satoshis instead of 573 satoshis.
This commit fixes a flake in the channel status update itest that
occurred if Carol got a channel edge update for a channel before it
heard of the channel in the first place. To avoid that, we wait for
Carol to sync her graph before sending out channel edge or policy
updates.
As always when we touch itest code, we bring the formatting and use of
the require library up to date.
Fixes#5680.
To make sure we're always reading from the WebSocket connection, we need
to always have an ongoing (but blocking) conn.ReadMessage() call going
on. To achieve this, we do the read in a separate goroutine and write to
a buffered channel. That way we can always read the next message while
the current one is being forwarded. This allows incoming ping messages
to be received and processed which then leads to the deadlines to be
extended correctly.
In this commit we add an extra config for enabling logging to an
external file when using embedded etcd. This can be useful when running
integration tests to see more details about etcd related issues.
We add an additional test case to the on-chain fund recovery test that
tries restoring the same wallet from the extended master root key
instead of the seed.
This commit fixes the issue where a wrong context being inherited to
create a timeout context. When a parent context timed out, all its
children contexts also timed out, even the children contexts had a
larger timeout value. This means it only makes sense to inherite from a
parent when its children have smaller timeout value. Given the setup of
the itest, all the timeout contexts need to be created from a context
background(hence no timeout on the parent) unless there's an explicit
timeout bound we want to set.
In this commit, we put the context initialization inside
openChannelAndAssert, thus saving us a few lines and making sure the
context is always properly handled.
In lnd, log messages about channels are generally logged with a
reference to their channel point rather than the short channel id.
Channel point is reorg-resistant and also easier to look up in for
example a block explorer.
In the link however, all log messages are accompanied by short channel
id. This makes it difficult to grep a log for all channel activity. The
PEER message for example which are often crucial to analyse, are logged
with channel points.
This commit modifies the link logging to also use channel points.
Because we now get one more update per channel when closing it, we need
to update our test that looks at the close notifications sent by the
SubscribeChannelEvent RPC.
We want to make sure we can recover funds from a channel that was force
closed by the local node just before the node needed to be restored. We
add a special test case with specific assertions for that scenario.
With one more notification event being dispatched in the local force
close case we need to update one of the integration tests to account for
the additional message.
This commit uses the require library for the link nodes garbage collect
test and fixes a flake that was discovered while hunting for other
flakes. Some times the channel isn't updated fast enough so we can
detech it on first try. So we give it a few more tries to stabilize the
test.
This commit fixes an old flake in the neutrino anchor output tests. It
turns out that sometimes with Neutrino we don't have enough UTXOs in our
wallet to sweep both the local and remote anchor. This is very likely a
timing issue, we need to give the wallet more time to catch up with the
chain and process all transactions to find unspent outputs.
We address this two-fold: We add an additional UTXO to Alice. And then
we also make sure we detect both UTXOs properly after restarting.
From the error in the itest output log it is not clear whether scraping
the profile page caused a test to fail or whether it was just a
follow-up error. We make it a bit more clear with an added message.
To make it easier to see what tranche a failed test was running in, we
add the tranche index to the test name. This corresponds to the number
in the .logs-tranche<index> folder name so the logs can be found much
quicker.
Improve 'ErrReservedValueInvalidated' error string to explain that the
error is triggered by a transaction that would deplete funds reserved for
potential future anchor channel closings (via CPFP)
Add hint that further details can be found in the debug log
Update strings in 'lntest/itest/log_error_whitelist.txt' correspondingly
This commit creates the file lnd_misc_test.go to hold all miscellaneous
tests in the file lnd_test.go. From now on, the lnd_test.go will only be
responsible for handling the "top" level functionalities such as
splitting test cases and run them. Newly created test cases should find
their places in the related test files, or create new one when needed.
This commit refactors the function assertNumConnections to use
wait.NoError. Prior to this commit, `make lint` will fail on this
function. While fixing it, it's noticed that wait.NoError suits the
case so it's refactored to use it.
In #5364 we added a new error path in the `StopDaemon` method to return
an error if shutdown was attempted while a rescan/recover instance was
in progress. Since the wallet actually won't fully stop (atm)
mid-recovery, the call effectively didn't do anything in that scenario,
so we started to return an error to properly reflect that. However this
causes certain itests to fail, as during recovery, the stop attempt will
fail leading to the test itself failing.
In this commit, we wrap the calls to stop a running daemon within a
`wait.NoError` call so we'll continually try to shut down the daemon
rather than quit on the first try.
Fixes#5423.
We do this to trigger a bug that will be resolved in a follow-up commit.
This bug prevents inbound legacy channels from being rejected by the
recipient if they have at least one anchor channel already opened
without an on-chain balance.
This commit refactored the function NewNode to take a *testing.T so that
the unexpected error is checked inside it. The caller is now free from
checking the errors.
This permits an AMP invoice to be "pseudo-reusable", where the invoice
paramters can be used multiple times so long as a new payment address is
supplied. This prevents additional round trips between payer and payee
to obtain a new invoice, even though the payments/invoices won't be
logically associated via the RPC interface like they would when the full
reusable invoices are deployed.
In some rare instances it can happen that the nodes don't find each
other again after one of them has been re-created and the other one has
been restarted in the SCB tests. By making sure the re-created has the
same P2P port again as before, we make sure they can connect to each
other again successfully for executing DLP.
Since there is a lot of connecting and disconnecting between nodes in
the channel backup tests, we try to speed up that process by lowering
the min backoff from 1 second to 50 milliseconds. We also make sure we
never wait more than 1 second if it does take multple attempts. This
should sum up and hopefully speed up our tests a bit.
