sample-lnd.conf: remove litecoin conf options

sample-lnd.conf

@@ -824,213 +824,6 @@
 ; Neutrino is used. 
 ; neutrino.validatechannels=false
 
-
-[Litecoin]
-
-; If the Litecoin chain should be active. Atm, only a single chain can be
-; active.
-; litecoin.active=false
-
-; The directory to store the chain's data within.
-; Default:
-;   litecoin.chaindir=~/.lnd/data/chain/litecoin
-
-; Use Litecoin's main network.
-; litecoin.mainnet=false
-
-; Use Litecoin's test network.
-; litecoin.testnet=false
-;
-; Use Litecoin's simulation test network
-; litecoin.simnet=false
-
-; Use Litecoin's regression test network
-; litecoin.regtest=false
-
-; Litecoin does not support the signet test network. The options
-; litecoin.signet, litecoin.signetchallenge and litecoin.signetseednode are
-; only defined because the data structure is shared with bitcoind.
-
-; Use the ltcd back-end.
-; Default:
-;   litecoin.node=ltcd
-; Example
-;   Use the litecoind back-end.
-;   litecoin.node=litecoind
-
-; The default number of confirmations a channel must have before it's considered
-; open. We'll require any incoming channel requests to wait this many
-; confirmations before we consider the channel active.
-; Default:
-;   litecoin.defaultchanconfs=
-; Example:
-;   litecoin.defaultchanconfs=3
-
-; The default number of blocks we will require our channel counterparty to wait
-; before accessing its funds in case of unilateral close. If this is not set, we
-; will scale the value according to the channel size.
-; Default:
-;   litecoin.defaultremotedelay=
-; Example:
-;   litecoin.defaultremotedelay=144
-
-; The maximum number of blocks we will limit the wait that our own funds are
-; encumbered by in the case when our node unilaterally closes. If a remote peer
-; proposes a channel with a delay above this amount, lnd will reject the
-; channel.
-; litecoin.maxlocaldelay=2016
-
-; The smallest HTLC we are willing to accept on our channels, in millisatoshi.
-; litecoin.minhtlc=1
-
-; The smallest HTLC we are willing to send out on our channels, in millisatoshi.
-; litecoin.minhtlcout=1000
-
-; The base fee in millisatoshi we will charge for forwarding payments on our
-; channels.
-; litecoin.basefee=1000
-
-; The fee rate used when forwarding payments on our channels. The total fee
-; charged is basefee + (amount * feerate / 1000000), where amount is the
-; forwarded amount.
-; litecoin.feerate=1
-
-; The CLTV delta we will subtract from a forwarded HTLC's timelock value.
-; litecoin.timelockdelta=576
-
-; The seed DNS server(s) to use for initial peer discovery. Must be specified as
-; a '<primary_dns>[,<soa_primary_dns>]' tuple where the SOA address is needed
-; for DNS resolution through Tor but is optional for clearnet users. Multiple
-; tuples can be specified, will overwrite the default seed servers.
-; The default seed servers are:
-; Default:
-;  mainnet:
-;   litecoin.dnsseed=ltc.nodes.lightning.directory,soa.nodes.lightning.directory
-;
-; Example for custom DNS servers:
-;   litecoin.dnsseed=seed1.test-ltc.lightning
-;   litecoin.dnsseed=seed2.test-ltc.lightning,soa.seed2.test-ltc.lightning
-
-
-[Ltcd]
-
-; The base directory that contains the node's data, logs, configuration file,
-; etc.
-; ltcd.dir=~/.ltcd
-
-; The host that your local ltcd daemon is listening on. By default, this
-; setting is assumed to be localhost with the default port for the current
-; network.
-; ltcd.rpchost=localhost
-
-; Username for RPC connections to ltcd. By default, lnd will attempt to
-; automatically obtain the credentials, so this likely won't need to be set
-; (other than for simnet mode).
-; Default:
-;   ltcd.rpcuser=
-; Example:
-;   ltcd.rpcuser=kek
-
-; Password for RPC connections to ltcd. By default, lnd will attempt to
-; automatically obtain the credentials, so this likely won't need to be set
-; (other than for simnet mode).
-; Default:
-;   ltcd.rpcpass=
-; Example:
-;   ltcd.rpcpass=kek
-
-; File containing the daemon's certificate file. This only needs to be set if
-; the node isn't on the same host as lnd.
-; ltcd.rpccert=~/.ltcd/rpc.cert
-
-; The raw bytes of the daemon's PEM-encoded certificate chain which will be used
-; to authenticate the RPC connection. This only needs to be set if the ltcd
-; node is on a remote host.
-; ltcd.rawrpccert=
-
-
-[Litecoind]
-
-; The base directory that contains the node's data, logs, configuration file,
-; etc.
-; litecoind.dir=~/.litecoin
-
-; Configuration filepath.
-; Default:
-;   litecoind.config=
-; Example:
-;   litecoind.config=~/.litecoin/litecoin.conf
-
-; Authentication cookie file for RPC connections.
-; Default:
-;   litecoind.rpccookie=
-; Example:
-;   litecoind.rpccookie=~/.litecoin/.cookie
-
-; The host that your local litecoind daemon is listening on. By default, this
-; setting is assumed to be localhost with the default port for the current
-; network.
-; litecoind.rpchost=localhost
-
-; Username for RPC connections to litecoind. By default, lnd will attempt to
-; automatically obtain the credentials, so this likely won't need to be set
-; (other than for a remote litecoind instance).
-; Default:
-;   litecoind.rpcuser=
-; Example:
-;   litecoind.rpcuser=kek
-
-; Password for RPC connections to litecoind. By default, lnd will attempt to
-; automatically obtain the credentials, so this likely won't need to be set
-; (other than for a remote litecoind instance).
-; Default:
-;   litecoind.rpcpass=
-; Example:
-;   litecoind.rpcpass=kek
-
-; ZMQ socket which sends rawblock and rawtx notifications from litecoind. By
-; default, lnd will attempt to automatically obtain this information, so this
-; likely won't need to be set (other than for a remote litecoind instance).
-; Default:
-;   litecoind.zmqpubrawblock=
-; Example:
-;   litecoind.zmqpubrawblock=tcp://127.0.0.1:28332
-
-; Default:
-;   litecoind.zmqpubrawtx=
-; Example:
-;   litecoind.zmqpubrawtx=tcp://127.0.0.1:28333
-
-; Default:
-;   litecoind.zmqreaddeadline=
-; Example:
-;   litecoind.zmqreaddeadline=10s
-
-; Use litecoind's rpc interface to get block and transaction notifications
-; instead of using the zmq interface. Only the rpcpolling option needs to
-; be set in order to enable this, the rest of the options can be used to
-; change the default values used for this configuration.
-; litecoind.rpcpolling=false
-
-; Default:
-;   litecoind.blockpollinginterval=0s
-; Example:
-;   litecoind.blockpollinginterval=1m
-
-; Default:
-;   litecoind.txpollinginterval=0s
-; Example:
-;   litecoind.txpollinginterval=30s
-
-; Fee estimate mode for litecoind. It must be either "ECONOMICAL" or "CONSERVATIVE".
-; If unset, the default value is "CONSERVATIVE".
-; litecoind.estimatemode=CONSERVATIVE
-
-; The maximum number of peers lnd will choose from the backend node to retrieve
-; pruned blocks from. This only applies to pruned nodes.
-; litecoind.pruned-node-max-peers=4
-
-
 [autopilot]
 
 ; If the autopilot agent should be active or not. The autopilot agent will