# BOLT #8: Encrypted and Authenticated Transport All communications between Lightning nodes is encrypted in order to provide confidentiality for all transcripts between nodes and is authenticated in order to avoid malicious interference. Each node has a known long-term identifier that is a public key on Bitcoin's `secp256k1` curve. This long-term public key is used within the protocol to establish an encrypted and authenticated connection with peers, and also to authenticate any information advertised on behalf of a node. # Table of Contents * [Cryptographic Messaging Overview](#cryptographic-messaging-overview) * [Authenticated Key Agreement Handshake](#authenticated-key-agreement-handshake) * [Handshake Versioning](#handshake-versioning) * [Noise Protocol Instantiation](#noise-protocol-instantiation) * [Authenticated Key Exchange Handshake Specification](#authenticated-key-exchange-handshake-specification) * [Handshake State](#handshake-state) * [Handshake State Initialization](#handshake-state-initialization) * [Handshake Exchange](#handshake-exchange) * [Lightning Message Specification](#lightning-message-specification) * [Encrypting and Sending Messages](#encrypting-and-sending-messages) * [Receiving and Decrypting Messages](#receiving-and-decrypting-messages) * [Lightning Message Key Rotation](#lightning-message-key-rotation) * [Security Considerations](#security-considerations) * [Appendix A: Transport Test Vectors](#appendix-a-transport-test-vectors) * [Initiator Tests](#initiator-tests) * [Responder Tests](#responder-tests) * [Message Encryption Tests](#message-encryption-tests) * [Acknowledgments](#acknowledgments) * [References](#references) * [Authors](#authors) ## Cryptographic Messaging Overview Prior to sending any Lightning messages, nodes MUST first initiate the cryptographic session state that is used to encrypt and authenticate all messages sent between nodes. The initialization of this cryptographic session state is completely distinct from any inner protocol message header or conventions. The transcript between two nodes is separated into two distinct segments: 1. Before any actual data transfer, both nodes participate in an authenticated key agreement handshake, which is based on the Noise Protocol Framework[2](#reference-2). 2. If the initial handshake is successful, then nodes enter the Lightning message exchange phase. In the Lightning message exchange phase, all messages are Authenticated Encryption with Associated Data (AEAD) ciphertexts. ### Authenticated Key Agreement Handshake The handshake chosen for the authenticated key exchange is `Noise_XK`. As a pre-message, the initiator must know the identity public key of the responder. This provides a degree of identity hiding for the responder, as its static public key is _never_ transmitted during the handshake. Instead, authentication is achieved implicitly via a series of Elliptic-Curve Diffie-Hellman (ECDH) operations followed by a MAC check. The authenticated key agreement (`Noise_XK`) is performed in three distinct steps (acts). During each act of the handshake the following occurs: some (possibly encrypted) keying material is sent to the other party; an ECDH is performed, based on exactly which act is being executed, with the result mixed into the current set of encryption keys (`ck` the chaining key and `k` the encryption key); and an AEAD payload with a zero-length cipher text is sent. As this payload has no length, only a MAC is sent across. The mixing of ECDH outputs into a hash digest forms an incremental TripleDH handshake. Using the language of the Noise Protocol, `e` and `s` (both public keys with `e` being the ephemeral key and `s` being the static key which in our case is usually the `nodeid`) indicate possibly encrypted keying material, and `es`, `ee`, and `se` each indicate an ECDH operation between two keys. The handshake is laid out as follows: ``` Noise_XK(s, rs): <- s ... -> e, es <- e, ee -> s, se ``` All of the handshake data sent across the wire, including the keying material, is incrementally hashed into a session-wide "handshake digest", `h`. Note that the handshake state `h` is never transmitted during the handshake; instead, digest is used as the Associated Data within the zero-length AEAD messages. Authenticating each message sent ensures that a man-in-the-middle (MITM) hasn't modified or replaced any of the data sent as part of a handshake, as the MAC check would fail on the other side if so. A successful check of the MAC by the receiver indicates implicitly that all authentication has been successful up to that point. If a MAC check ever fails during the handshake process, then the connection is to be immediately terminated. ### Handshake Versioning Each message sent during the initial handshake starts with a single leading byte, which indicates the version used for the current handshake. A version of 0 indicates that no change is necessary, while a non-zero version indicate that the client has deviated from the protocol originally specified within this document. Clients MUST reject handshake attempts initiated with an unknown version. ### Noise Protocol Instantiation Concrete instantiations of the Noise Protocol require the definition of three abstract cryptographic objects: the hash function, the elliptic curve, and the AEAD cipher scheme. For Lightning, `SHA-256` is chosen as the hash function, `secp256k1` as the elliptic curve, and `ChaChaPoly-1305` as the AEAD construction. The composition of `ChaCha20` and `Poly1305` that are used MUST conform to `RFC 8439`[1](#reference-1). The official protocol name for the Lightning variant of Noise is `Noise_XK_secp256k1_ChaChaPoly_SHA256`. The ASCII string representation of this value is hashed into a digest used to initialize the starting handshake state. If the protocol names of two endpoints differ, then the handshake process fails immediately. ## Authenticated Key Exchange Handshake Specification The handshake proceeds in three acts, taking 1.5 round trips. Each handshake is a _fixed_ sized payload without any header or additional meta-data attached. The exact size of each act is as follows: * **Act One**: 50 bytes * **Act Two**: 50 bytes * **Act Three**: 66 bytes ### Handshake State Throughout the handshake process, each side maintains these variables: * `ck`: the **chaining key**. This value is the accumulated hash of all previous ECDH outputs. At the end of the handshake, `ck` is used to derive the encryption keys for Lightning messages. * `h`: the **handshake hash**. This value is the accumulated hash of _all_ handshake data that has been sent and received so far during the handshake process. * `temp_k1`, `temp_k2`, `temp_k3`: the **intermediate keys**. These are used to encrypt and decrypt the zero-length AEAD payloads at the end of each handshake message. * `e`: a party's **ephemeral keypair**. For each session, a node MUST generate a new ephemeral key with strong cryptographic randomness. * `s`: a party's **static keypair** (`ls` for local, `rs` for remote) The following functions will also be referenced: * `ECDH(k, rk)`: performs an Elliptic-Curve Diffie-Hellman operation using `k`, which is a valid `secp256k1` private key, and `rk`, which is a valid public key * The returned value is the SHA256 of the compressed format of the generated point. * `HKDF(salt,ikm)`: a function defined in `RFC 5869`[3](#reference-3), evaluated with a zero-length `info` field * All invocations of `HKDF` implicitly return 64 bytes of cryptographic randomness using the extract-and-expand component of the `HKDF`. * `encryptWithAD(k, n, ad, plaintext)`: outputs `encrypt(k, n, ad, plaintext)` * Where `encrypt` is an evaluation of `ChaCha20-Poly1305` (IETF variant) with the passed arguments, with nonce `n` encoded as 32 zero bits, followed by a *little-endian* 64-bit value. Note: this follows the Noise Protocol convention, rather than our normal endian. * `decryptWithAD(k, n, ad, ciphertext)`: outputs `decrypt(k, n, ad, ciphertext)` * Where `decrypt` is an evaluation of `ChaCha20-Poly1305` (IETF variant) with the passed arguments, with nonce `n` encoded as 32 zero bits, followed by a *little-endian* 64-bit value. * `generateKey()`: generates and returns a fresh `secp256k1` keypair * Where the object returned by `generateKey` has two attributes: * `.pub`, which returns an abstract object representing the public key * `.priv`, which represents the private key used to generate the public key * Where the object also has a single method: * `.serializeCompressed()` * `a || b` denotes the concatenation of two byte strings `a` and `b` ### Handshake State Initialization Before the start of Act One, both sides initialize their per-sessions state as follows: 1. `h = SHA-256(protocolName)` * where `protocolName = "Noise_XK_secp256k1_ChaChaPoly_SHA256"` encoded as an ASCII string 2. `ck = h` 3. `h = SHA-256(h || prologue)` * where `prologue` is the ASCII string: `lightning` As a concluding step, both sides mix the responder's public key into the handshake digest: * The initiating node mixes in the responding node's static public key serialized in Bitcoin's compressed format: * `h = SHA-256(h || rs.pub.serializeCompressed())` * The responding node mixes in their local static public key serialized in Bitcoin's compressed format: * `h = SHA-256(h || ls.pub.serializeCompressed())` ### Handshake Exchange #### Act One ``` -> e, es ``` Act One is sent from initiator to responder. During Act One, the initiator attempts to satisfy an implicit challenge by the responder. To complete this challenge, the initiator must know the static public key of the responder. The handshake message is _exactly_ 50 bytes: 1 byte for the handshake version, 33 bytes for the compressed ephemeral public key of the initiator, and 16 bytes for the `poly1305` tag. **Sender Actions:** 1. `e = generateKey()` 2. `h = SHA-256(h || e.pub.serializeCompressed())` * The newly generated ephemeral key is accumulated into the running handshake digest. 3. `es = ECDH(e.priv, rs)` * The initiator performs an ECDH between its newly generated ephemeral key and the remote node's static public key. 4. `ck, temp_k1 = HKDF(ck, es)` * A new temporary encryption key is generated, which is used to generate the authenticating MAC. 5. `c = encryptWithAD(temp_k1, 0, h, zero)` * where `zero` is a zero-length plaintext 6. `h = SHA-256(h || c)` * Finally, the generated ciphertext is accumulated into the authenticating handshake digest. 7. Send `m = 0 || e.pub.serializeCompressed() || c` to the responder over the network buffer. **Receiver Actions:** 1. Read _exactly_ 50 bytes from the network buffer. 2. Parse the read message (`m`) into `v`, `re`, and `c`: * where `v` is the _first_ byte of `m`, `re` is the next 33 bytes of `m`, and `c` is the last 16 bytes of `m` * The raw bytes of the remote party's ephemeral public key (`re`) are to be deserialized into a point on the curve using affine coordinates as encoded by the key's serialized composed format. 3. If `v` is an unrecognized handshake version, then the responder MUST abort the connection attempt. 4. `h = SHA-256(h || re.serializeCompressed())` * The responder accumulates the initiator's ephemeral key into the authenticating handshake digest. 5. `es = ECDH(s.priv, re)` * The responder performs an ECDH between its static private key and the initiator's ephemeral public key. 6. `ck, temp_k1 = HKDF(ck, es)` * A new temporary encryption key is generated, which will shortly be used to check the authenticating MAC. 7. `p = decryptWithAD(temp_k1, 0, h, c)` * If the MAC check in this operation fails, then the initiator does _not_ know the responder's static public key. If this is the case, then the responder MUST terminate the connection without any further messages. 8. `h = SHA-256(h || c)` * The received ciphertext is mixed into the handshake digest. This step serves to ensure the payload wasn't modified by a MITM. #### Act Two ``` <- e, ee ``` Act Two is sent from the responder to the initiator. Act Two will _only_ take place if Act One was successful. Act One was successful if the responder was able to properly decrypt and check the MAC of the tag sent at the end of Act One. The handshake is _exactly_ 50 bytes: 1 byte for the handshake version, 33 bytes for the compressed ephemeral public key of the responder, and 16 bytes for the `poly1305` tag. **Sender Actions:** 1. `e = generateKey()` 2. `h = SHA-256(h || e.pub.serializeCompressed())` * The newly generated ephemeral key is accumulated into the running handshake digest. 3. `ee = ECDH(e.priv, re)` * where `re` is the ephemeral key of the initiator, which was received during Act One 4. `ck, temp_k2 = HKDF(ck, ee)` * A new temporary encryption key is generated, which is used to generate the authenticating MAC. 5. `c = encryptWithAD(temp_k2, 0, h, zero)` * where `zero` is a zero-length plaintext 6. `h = SHA-256(h || c)` * Finally, the generated ciphertext is accumulated into the authenticating handshake digest. 7. Send `m = 0 || e.pub.serializeCompressed() || c` to the initiator over the network buffer. **Receiver Actions:** 1. Read _exactly_ 50 bytes from the network buffer. 2. Parse the read message (`m`) into `v`, `re`, and `c`: * where `v` is the _first_ byte of `m`, `re` is the next 33 bytes of `m`, and `c` is the last 16 bytes of `m`. 3. If `v` is an unrecognized handshake version, then the responder MUST abort the connection attempt. 4. `h = SHA-256(h || re.serializeCompressed())` 5. `ee = ECDH(e.priv, re)` * where `re` is the responder's ephemeral public key * The raw bytes of the remote party's ephemeral public key (`re`) are to be deserialized into a point on the curve using affine coordinates as encoded by the key's serialized composed format. 6. `ck, temp_k2 = HKDF(ck, ee)` * A new temporary encryption key is generated, which is used to generate the authenticating MAC. 7. `p = decryptWithAD(temp_k2, 0, h, c)` * If the MAC check in this operation fails, then the initiator MUST terminate the connection without any further messages. 8. `h = SHA-256(h || c)` * The received ciphertext is mixed into the handshake digest. This step serves to ensure the payload wasn't modified by a MITM. #### Act Three ``` -> s, se ``` Act Three is the final phase in the authenticated key agreement described in this section. This act is sent from the initiator to the responder as a concluding step. Act Three is executed _if and only if_ Act Two was successful. During Act Three, the initiator transports its static public key to the responder encrypted with _strong_ forward secrecy, using the accumulated `HKDF` derived secret key at this point of the handshake. The handshake is _exactly_ 66 bytes: 1 byte for the handshake version, 33 bytes for the static public key encrypted with the `ChaCha20` stream cipher, 16 bytes for the encrypted public key's tag generated via the AEAD construction, and 16 bytes for a final authenticating tag. **Sender Actions:** 1. `c = encryptWithAD(temp_k2, 1, h, s.pub.serializeCompressed())` * where `s` is the static public key of the initiator 2. `h = SHA-256(h || c)` 3. `se = ECDH(s.priv, re)` * where `re` is the ephemeral public key of the responder 4. `ck, temp_k3 = HKDF(ck, se)` * The final intermediate shared secret is mixed into the running chaining key. 5. `t = encryptWithAD(temp_k3, 0, h, zero)` * where `zero` is a zero-length plaintext 6. `sk, rk = HKDF(ck, zero)` * where `zero` is a zero-length plaintext, `sk` is the key to be used by the initiator to encrypt messages to the responder, and `rk` is the key to be used by the initiator to decrypt messages sent by the responder * The final encryption keys, to be used for sending and receiving messages for the duration of the session, are generated. 7. `rn = 0, sn = 0` * The sending and receiving nonces are initialized to 0. 8. Send `m = 0 || c || t` over the network buffer. **Receiver Actions:** 1. Read _exactly_ 66 bytes from the network buffer. 2. Parse the read message (`m`) into `v`, `c`, and `t`: * where `v` is the _first_ byte of `m`, `c` is the next 49 bytes of `m`, and `t` is the last 16 bytes of `m` 3. If `v` is an unrecognized handshake version, then the responder MUST abort the connection attempt. 4. `rs = decryptWithAD(temp_k2, 1, h, c)` * At this point, the responder has recovered the static public key of the initiator. * If the MAC check in this operation fails, then the responder MUST terminate the connection without any further messages. 5. `h = SHA-256(h || c)` 6. `se = ECDH(e.priv, rs)` * where `e` is the responder's original ephemeral key 7. `ck, temp_k3 = HKDF(ck, se)` 8. `p = decryptWithAD(temp_k3, 0, h, t)` * If the MAC check in this operation fails, then the responder MUST terminate the connection without any further messages. 9. `rk, sk = HKDF(ck, zero)` * where `zero` is a zero-length plaintext, `rk` is the key to be used by the responder to decrypt the messages sent by the initiator, and `sk` is the key to be used by the responder to encrypt messages to the initiator * The final encryption keys, to be used for sending and receiving messages for the duration of the session, are generated. 10. `rn = 0, sn = 0` * The sending and receiving nonces are initialized to 0. ## Lightning Message Specification At the conclusion of Act Three, both sides have derived the encryption keys, which will be used to encrypt and decrypt messages for the remainder of the session. The actual Lightning protocol messages are encapsulated within AEAD ciphertexts. Each message is prefixed with another AEAD ciphertext, which encodes the total length of the following Lightning message (not including its MAC). The *maximum* size of _any_ Lightning message MUST NOT exceed `65535` bytes. A maximum size of `65535` simplifies testing, makes memory management easier, and helps mitigate memory-exhaustion attacks. In order to make traffic analysis more difficult, the length prefix for all encrypted Lightning messages is also encrypted. Additionally a 16-byte `Poly-1305` tag is added to the encrypted length prefix in order to ensure that the packet length hasn't been modified when in-flight and also to avoid creating a decryption oracle. The structure of packets on the wire resembles the following: ``` +------------------------------- |2-byte encrypted message length| +------------------------------- | 16-byte MAC of the encrypted | | message length | +------------------------------- | | | | | encrypted Lightning | | message | | | +------------------------------- | 16-byte MAC of the | | Lightning message | +------------------------------- ``` The prefixed message length is encoded as a 2-byte big-endian integer, for a total maximum packet length of `2 + 16 + 65535 + 16` = `65569` bytes. ### Encrypting and Sending Messages In order to encrypt and send a Lightning message (`m`) to the network stream, given a sending key (`sk`) and a nonce (`sn`), the following steps are completed: 1. Let `l = len(m)`. * where `len` obtains the length in bytes of the Lightning message 2. Serialize `l` into 2 bytes encoded as a big-endian integer. 3. Encrypt `l` (using `ChaChaPoly-1305`, `sn`, and `sk`), to obtain `lc` (18 bytes) * The nonce `sn` is encoded as a 96-bit little-endian number. As the decoded nonce is 64 bits, the 96-bit nonce is encoded as: 32 bits of leading 0s followed by a 64-bit value. * The nonce `sn` MUST be incremented after this step. * A zero-length byte slice is to be passed as the AD (associated data). 4. Finally, encrypt the message itself (`m`) using the same procedure used to encrypt the length prefix. Let encrypted ciphertext be known as `c`. * The nonce `sn` MUST be incremented after this step. 5. Send `lc || c` over the network buffer. ### Receiving and Decrypting Messages In order to decrypt the _next_ message in the network stream, the following steps are completed: 1. Read _exactly_ 18 bytes from the network buffer. 2. Let the encrypted length prefix be known as `lc`. 3. Decrypt `lc` (using `ChaCha20-Poly1305`, `rn`, and `rk`), to obtain the size of the encrypted packet `l`. * A zero-length byte slice is to be passed as the AD (associated data). * The nonce `rn` MUST be incremented after this step. 4. Read _exactly_ `l+16` bytes from the network buffer, and let the bytes be known as `c`. 5. Decrypt `c` (using `ChaCha20-Poly1305`, `rn`, and `rk`), to obtain decrypted plaintext packet `p`. * The nonce `rn` MUST be incremented after this step. ## Lightning Message Key Rotation Changing keys regularly and forgetting previous keys is useful to prevent the decryption of old messages, in the case of later key leakage (i.e. backwards secrecy). Key rotation is performed for _each_ key (`sk` and `rk`) _individually_. A key is to be rotated after a party encrypts or decrypts 1000 times with it (i.e. every 500 messages). This can be properly accounted for by rotating the key once the nonce dedicated to it exceeds 1000. Key rotation for a key `k` is performed according to the following steps: 1. Let `ck` be the chaining key obtained at the end of Act Three. 2. `ck', k' = HKDF(ck, k)` 3. Reset the nonce for the key to `n = 0`. 4. `k = k'` 5. `ck = ck'` # Security Considerations It is strongly recommended that existing, commonly-used, validated libraries be used for encryption and decryption, to avoid the many possible implementation pitfalls. # Appendix A: Transport Test Vectors To make a repeatable test handshake, the following specifies what `generateKey()` will return (i.e. the value for `e.priv`) for each side. Note that this is a violation of the spec, which requires randomness. ## Initiator Tests The initiator SHOULD produce the given output when fed this input. The comments reflect internal states, for debugging purposes. ``` name: transport-initiator successful handshake rs.pub: 0x028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 ls.priv: 0x1111111111111111111111111111111111111111111111111111111111111111 ls.pub: 0x034f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa e.priv: 0x1212121212121212121212121212121212121212121212121212121212121212 e.pub: 0x036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f7 # Act One # h=0x9e0e7de8bb75554f21db034633de04be41a2b8a18da7a319a03c803bf02b396c # ss=0x1e2fb3c8fe8fb9f262f649f64d26ecf0f2c0a805a767cf02dc2d77a6ef1fdcc3 # HKDF(0x2640f52eebcd9e882958951c794250eedb28002c05d7dc2ea0f195406042caf1,0x1e2fb3c8fe8fb9f262f649f64d26ecf0f2c0a805a767cf02dc2d77a6ef1fdcc3) # ck,temp_k1=0xb61ec1191326fa240decc9564369dbb3ae2b34341d1e11ad64ed89f89180582f,0xe68f69b7f096d7917245f5e5cf8ae1595febe4d4644333c99f9c4a1282031c9f # encryptWithAD(0xe68f69b7f096d7917245f5e5cf8ae1595febe4d4644333c99f9c4a1282031c9f, 0x000000000000000000000000, 0x9e0e7de8bb75554f21db034633de04be41a2b8a18da7a319a03c803bf02b396c, ) # c=0df6086551151f58b8afe6c195782c6a # h=0x9d1ffbb639e7e20021d9259491dc7b160aab270fb1339ef135053f6f2cebe9ce output: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two input: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae # re=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # h=0x38122f669819f906000621a14071802f93f2ef97df100097bcac3ae76c6dc0bf # ss=0xc06363d6cc549bcb7913dbb9ac1c33fc1158680c89e972000ecd06b36c472e47 # HKDF(0xb61ec1191326fa240decc9564369dbb3ae2b34341d1e11ad64ed89f89180582f,0xc06363d6cc549bcb7913dbb9ac1c33fc1158680c89e972000ecd06b36c472e47) # ck,temp_k2=0xe89d31033a1b6bf68c07d22e08ea4d7884646c4b60a9528598ccb4ee2c8f56ba,0x908b166535c01a935cf1e130a5fe895ab4e6f3ef8855d87e9b7581c4ab663ddc # decryptWithAD(0x908b166535c01a935cf1e130a5fe895ab4e6f3ef8855d87e9b7581c4ab663ddc, 0x000000000000000000000000, 0x38122f669819f906000621a14071802f93f2ef97df100097bcac3ae76c6dc0bf, 0x6e2470b93aac583c9ef6eafca3f730ae) # h=0x90578e247e98674e661013da3c5c1ca6a8c8f48c90b485c0dfa1494e23d56d72 # Act Three # encryptWithAD(0x908b166535c01a935cf1e130a5fe895ab4e6f3ef8855d87e9b7581c4ab663ddc, 0x000000000100000000000000, 0x90578e247e98674e661013da3c5c1ca6a8c8f48c90b485c0dfa1494e23d56d72, 0x034f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa) # c=0xb9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c3822 # h=0x5dcb5ea9b4ccc755e0e3456af3990641276e1d5dc9afd82f974d90a47c918660 # ss=0xb36b6d195982c5be874d6d542dc268234379e1ae4ff1709402135b7de5cf0766 # HKDF(0xe89d31033a1b6bf68c07d22e08ea4d7884646c4b60a9528598ccb4ee2c8f56ba,0xb36b6d195982c5be874d6d542dc268234379e1ae4ff1709402135b7de5cf0766) # ck,temp_k3=0x919219dbb2920afa8db80f9a51787a840bcf111ed8d588caf9ab4be716e42b01,0x981a46c820fb7a241bc8184ba4bb1f01bcdfafb00dde80098cb8c38db9141520 # encryptWithAD(0x981a46c820fb7a241bc8184ba4bb1f01bcdfafb00dde80098cb8c38db9141520, 0x000000000000000000000000, 0x5dcb5ea9b4ccc755e0e3456af3990641276e1d5dc9afd82f974d90a47c918660, ) # t=0x8dc68b1c466263b47fdf31e560e139ba output: 0x00b9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c38228dc68b1c466263b47fdf31e560e139ba # HKDF(0x919219dbb2920afa8db80f9a51787a840bcf111ed8d588caf9ab4be716e42b01,zero) output: sk,rk=0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9,0xbb9020b8965f4df047e07f955f3c4b88418984aadc5cdb35096b9ea8fa5c3442 name: transport-initiator act2 short read test rs.pub: 0x028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 ls.priv: 0x1111111111111111111111111111111111111111111111111111111111111111 ls.pub: 0x034f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa e.priv: 0x1212121212121212121212121212121212121212121212121212121212121212 e.pub: 0x036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f7 output: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two input: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730 output: ERROR (ACT2_READ_FAILED) name: transport-initiator act2 bad version test rs.pub: 0x028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 ls.priv: 0x1111111111111111111111111111111111111111111111111111111111111111 ls.pub: 0x034f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa e.priv: 0x1212121212121212121212121212121212121212121212121212121212121212 e.pub: 0x036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f7 output: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two input: 0x0102466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae output: ERROR (ACT2_BAD_VERSION 1) name: transport-initiator act2 bad key serialization test rs.pub: 0x028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 ls.priv: 0x1111111111111111111111111111111111111111111111111111111111111111 ls.pub: 0x034f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa e.priv: 0x1212121212121212121212121212121212121212121212121212121212121212 e.pub: 0x036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f7 output: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two input: 0x0004466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae output: ERROR (ACT2_BAD_PUBKEY) name: transport-initiator act2 bad MAC test rs.pub: 0x028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 ls.priv: 0x1111111111111111111111111111111111111111111111111111111111111111 ls.pub: 0x034f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa e.priv: 0x1212121212121212121212121212121212121212121212121212121212121212 e.pub: 0x036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f7 output: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two input: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730af output: ERROR (ACT2_BAD_TAG) ``` ## Responder Tests The responder SHOULD produce the given output when fed this input. ``` name: transport-responder successful handshake ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # re=0x036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f7 # h=0x9e0e7de8bb75554f21db034633de04be41a2b8a18da7a319a03c803bf02b396c # ss=0x1e2fb3c8fe8fb9f262f649f64d26ecf0f2c0a805a767cf02dc2d77a6ef1fdcc3 # HKDF(0x2640f52eebcd9e882958951c794250eedb28002c05d7dc2ea0f195406042caf1,0x1e2fb3c8fe8fb9f262f649f64d26ecf0f2c0a805a767cf02dc2d77a6ef1fdcc3) # ck,temp_k1=0xb61ec1191326fa240decc9564369dbb3ae2b34341d1e11ad64ed89f89180582f,0xe68f69b7f096d7917245f5e5cf8ae1595febe4d4644333c99f9c4a1282031c9f # decryptWithAD(0xe68f69b7f096d7917245f5e5cf8ae1595febe4d4644333c99f9c4a1282031c9f, 0x000000000000000000000000, 0x9e0e7de8bb75554f21db034633de04be41a2b8a18da7a319a03c803bf02b396c, 0x0df6086551151f58b8afe6c195782c6a) # h=0x9d1ffbb639e7e20021d9259491dc7b160aab270fb1339ef135053f6f2cebe9ce # Act Two # e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 # h=0x38122f669819f906000621a14071802f93f2ef97df100097bcac3ae76c6dc0bf # ss=0xc06363d6cc549bcb7913dbb9ac1c33fc1158680c89e972000ecd06b36c472e47 # HKDF(0xb61ec1191326fa240decc9564369dbb3ae2b34341d1e11ad64ed89f89180582f,0xc06363d6cc549bcb7913dbb9ac1c33fc1158680c89e972000ecd06b36c472e47) # ck,temp_k2=0xe89d31033a1b6bf68c07d22e08ea4d7884646c4b60a9528598ccb4ee2c8f56ba,0x908b166535c01a935cf1e130a5fe895ab4e6f3ef8855d87e9b7581c4ab663ddc # encryptWithAD(0x908b166535c01a935cf1e130a5fe895ab4e6f3ef8855d87e9b7581c4ab663ddc, 0x000000000000000000000000, 0x38122f669819f906000621a14071802f93f2ef97df100097bcac3ae76c6dc0bf, ) # c=0x6e2470b93aac583c9ef6eafca3f730ae # h=0x90578e247e98674e661013da3c5c1ca6a8c8f48c90b485c0dfa1494e23d56d72 output: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae # Act Three input: 0x00b9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c38228dc68b1c466263b47fdf31e560e139ba # decryptWithAD(0x908b166535c01a935cf1e130a5fe895ab4e6f3ef8855d87e9b7581c4ab663ddc, 0x000000000100000000000000, 0x90578e247e98674e661013da3c5c1ca6a8c8f48c90b485c0dfa1494e23d56d72, 0xb9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c3822) # rs=0x034f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa # h=0x5dcb5ea9b4ccc755e0e3456af3990641276e1d5dc9afd82f974d90a47c918660 # ss=0xb36b6d195982c5be874d6d542dc268234379e1ae4ff1709402135b7de5cf0766 # HKDF(0xe89d31033a1b6bf68c07d22e08ea4d7884646c4b60a9528598ccb4ee2c8f56ba,0xb36b6d195982c5be874d6d542dc268234379e1ae4ff1709402135b7de5cf0766) # ck,temp_k3=0x919219dbb2920afa8db80f9a51787a840bcf111ed8d588caf9ab4be716e42b01,0x981a46c820fb7a241bc8184ba4bb1f01bcdfafb00dde80098cb8c38db9141520 # decryptWithAD(0x981a46c820fb7a241bc8184ba4bb1f01bcdfafb00dde80098cb8c38db9141520, 0x000000000000000000000000, 0x5dcb5ea9b4ccc755e0e3456af3990641276e1d5dc9afd82f974d90a47c918660, 0x8dc68b1c466263b47fdf31e560e139ba) # HKDF(0x919219dbb2920afa8db80f9a51787a840bcf111ed8d588caf9ab4be716e42b01,zero) output: rk,sk=0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9,0xbb9020b8965f4df047e07f955f3c4b88418984aadc5cdb35096b9ea8fa5c3442 name: transport-responder act1 short read test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c output: ERROR (ACT1_READ_FAILED) name: transport-responder act1 bad version test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x01036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a output: ERROR (ACT1_BAD_VERSION) name: transport-responder act1 bad key serialization test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00046360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a output: ERROR (ACT1_BAD_PUBKEY) name: transport-responder act1 bad MAC test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6b output: ERROR (ACT1_BAD_TAG) name: transport-responder act3 bad version test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two output: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae # Act Three input: 0x01b9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c38228dc68b1c466263b47fdf31e560e139ba output: ERROR (ACT3_BAD_VERSION 1) name: transport-responder act3 short read test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two output: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae # Act Three input: 0x00b9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c38228dc68b1c466263b47fdf31e560e139 output: ERROR (ACT3_READ_FAILED) name: transport-responder act3 bad MAC for ciphertext test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two output: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae # Act Three input: 0x00c9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c38228dc68b1c466263b47fdf31e560e139ba output: ERROR (ACT3_BAD_CIPHERTEXT) name: transport-responder act3 bad rs test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two output: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae # Act Three input: 0x00bfe3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa2235536ad09a8ee351870c2bb7f78b754a26c6cef79a98d25139c856d7efd252c2ae73c # decryptWithAD(0x908b166535c01a935cf1e130a5fe895ab4e6f3ef8855d87e9b7581c4ab663ddc, 0x000000000000000000000001, 0x90578e247e98674e661013da3c5c1ca6a8c8f48c90b485c0dfa1494e23d56d72, 0xd7fedc211450dd9602b41081c9bd05328b8bf8c0238880f7b7cb8a34bb6d8354081e8d4b81887fae47a74fe8aab3008653) # rs=0x044f355bdcb7cc0af728ef3cceb9615d90684bb5b2ca5f859ab0f0b704075871aa output: ERROR (ACT3_BAD_PUBKEY) name: transport-responder act3 bad MAC test ls.priv=2121212121212121212121212121212121212121212121212121212121212121 ls.pub=028d7500dd4c12685d1f568b4c2b5048e8534b873319f3a8daa612b469132ec7f7 e.priv=0x2222222222222222222222222222222222222222222222222222222222222222 e.pub=0x02466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f27 # Act One input: 0x00036360e856310ce5d294e8be33fc807077dc56ac80d95d9cd4ddbd21325eff73f70df6086551151f58b8afe6c195782c6a # Act Two output: 0x0002466d7fcae563e5cb09a0d1870bb580344804617879a14949cf22285f1bae3f276e2470b93aac583c9ef6eafca3f730ae # Act Three input: 0x00b9e3a702e93e3a9948c2ed6e5fd7590a6e1c3a0344cfc9d5b57357049aa22355361aa02e55a8fc28fef5bd6d71ad0c38228dc68b1c466263b47fdf31e560e139bb output: ERROR (ACT3_BAD_TAG) ``` ## Message Encryption Tests In this test, the initiator sends length 5 messages containing "hello" 1001 times. Only six example outputs are shown, for brevity and to test two key rotations: name: transport-message test ck=0x919219dbb2920afa8db80f9a51787a840bcf111ed8d588caf9ab4be716e42b01 sk=0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9 rk=0xbb9020b8965f4df047e07f955f3c4b88418984aadc5cdb35096b9ea8fa5c3442 # encrypt l: cleartext=0x0005, AD=NULL, sn=0x000000000000000000000000, sk=0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9 => 0xcf2b30ddf0cf3f80e7c35a6e6730b59fe802 # encrypt m: cleartext=0x68656c6c6f, AD=NULL, sn=0x000000000100000000000000, sk=0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9 => 0x473180f396d88a8fb0db8cbcf25d2f214cf9ea1d95 output 0: 0xcf2b30ddf0cf3f80e7c35a6e6730b59fe802473180f396d88a8fb0db8cbcf25d2f214cf9ea1d95 # encrypt l: cleartext=0x0005, AD=NULL, sn=0x000000000200000000000000, sk=0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9 => 0x72887022101f0b6753e0c7de21657d35a4cb # encrypt m: cleartext=0x68656c6c6f, AD=NULL, sn=0x000000000300000000000000, sk=0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9 => 0x2a1f5cde2650528bbc8f837d0f0d7ad833b1a256a1 output 1: 0x72887022101f0b6753e0c7de21657d35a4cb2a1f5cde2650528bbc8f837d0f0d7ad833b1a256a1 # 0xcc2c6e467efc8067720c2d09c139d1f77731893aad1defa14f9bf3c48d3f1d31, 0x3fbdc101abd1132ca3a0ae34a669d8d9ba69a587e0bb4ddd59524541cf4813d8 = HKDF(0x919219dbb2920afa8db80f9a51787a840bcf111ed8d588caf9ab4be716e42b01, 0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9) # 0xcc2c6e467efc8067720c2d09c139d1f77731893aad1defa14f9bf3c48d3f1d31, 0x3fbdc101abd1132ca3a0ae34a669d8d9ba69a587e0bb4ddd59524541cf4813d8 = HKDF(0x919219dbb2920afa8db80f9a51787a840bcf111ed8d588caf9ab4be716e42b01, 0x969ab31b4d288cedf6218839b27a3e2140827047f2c0f01bf5c04435d43511a9) output 500: 0x178cb9d7387190fa34db9c2d50027d21793c9bc2d40b1e14dcf30ebeeeb220f48364f7a4c68bf8 output 501: 0x1b186c57d44eb6de4c057c49940d79bb838a145cb528d6e8fd26dbe50a60ca2c104b56b60e45bd # 0x728366ed68565dc17cf6dd97330a859a6a56e87e2beef3bd828a4c4a54d8df06, 0x9e0477f9850dca41e42db0e4d154e3a098e5a000d995e421849fcd5df27882bd = HKDF(0xcc2c6e467efc8067720c2d09c139d1f77731893aad1defa14f9bf3c48d3f1d31, 0x3fbdc101abd1132ca3a0ae34a669d8d9ba69a587e0bb4ddd59524541cf4813d8) # 0x728366ed68565dc17cf6dd97330a859a6a56e87e2beef3bd828a4c4a54d8df06, 0x9e0477f9850dca41e42db0e4d154e3a098e5a000d995e421849fcd5df27882bd = HKDF(0xcc2c6e467efc8067720c2d09c139d1f77731893aad1defa14f9bf3c48d3f1d31, 0x3fbdc101abd1132ca3a0ae34a669d8d9ba69a587e0bb4ddd59524541cf4813d8) output 1000: 0x4a2f3cc3b5e78ddb83dcb426d9863d9d9a723b0337c89dd0b005d89f8d3c05c52b76b29b740f09 output 1001: 0x2ecd8c8a5629d0d02ab457a0fdd0f7b90a192cd46be5ecb6ca570bfc5e268338b1a16cf4ef2d36 # Acknowledgments TODO(roasbeef); fin # References 1. https://tools.ietf.org/html/rfc8439 2. http://noiseprotocol.org/noise.html 3. https://tools.ietf.org/html/rfc5869 # Authors FIXME ![Creative Commons License](https://i.creativecommons.org/l/by/4.0/88x31.png "License CC-BY")
This work is licensed under a [Creative Commons Attribution 4.0 International License](http://creativecommons.org/licenses/by/4.0/).