* Fix eclair-cli to work with equal sign in arguments (#926)
* Fix eclair cli argument passing
* Modify eclair-cli to work with equals in arguments
* Eclair-cli: show usage when wrong params are received
* Remove deprecated call from eclair-cli help message [ci skip]
* Make Electrum tests pass on windows (#932)
There was an obscure Docker error when trying to start an Electrum
server in tests. [1]
It appears that there is a conflict between Docker and Hyper-V on some
range of ports.
A workaround is to just change the port we were using.
[1] https://github.com/docker/for-win/issues/3171
* API: fix fee rate conversion (#936)
Our `open` API calls expects an optional fee rate in satoshi/byte, which is the most widely
used unit, but failed to convert to satoshi/kiloweight which is the standard in LN.
We also check that the converted fee rate cannot go below 253 satoshi/kiloweight.
* Expose the websocket over HTTP GET to work properly with basic auth (#934)
* Expose the websocket over HTTP GET
* Add test for basic auth over websocket endpoint
* Set max payment attempts from configuration (#931)
With a default to `5`.
* Add a proper payments database (#885)
There is no unique identifier for payments in LN protocol. Critically,
we can't use `payment_hash` as a unique id because there is no way to
ensure unicity at the protocol level.
Also, the general case for a "payment" is to be associated to multiple
`update_add_htlc`s, because of automated retries. We also routinely
retry payments, which means that the same `payment_hash` will be
conceptually linked to a list of lists of `update_add_htlc`s.
In order to address this, we introduce a payment id, which uniquely
identifies a payment, as in a set of sequential `update_add_htlc`
managed by a single `PaymentLifecycle` that ends with a `PaymentSent` or
`PaymentFailed` outcome.
We can then query the api using either `payment_id` or `payment_hash`.
The former will return a single payment status, the latter will return a
set of payment statuses, each identified by their `payment_id`.
* Add a payment identifier
* Remove InvalidPaymentHash channel exception
* Remove unused 'close' from paymentsDb
* Introduce sent_payments in PaymentDB, bump db version
* Return the UUID of the ongoing payment in /send API
* Add api to query payments by ID
* Add 'fallbackAddress' in /receive API
* Expose /paymentinfo by paymentHash
* Add id column to audit.sent table, add test for db migration
* Add invoices to payment DB
* Add license header to ExtraDirective.scala
* Respond with HTTP 404 if the corresponding invoice/paymentHash was not found.
* Left-pad numeric bolt11 tagged fields to have a number of bits multiple of five (bech32 encoding).
* Add invoices API
* Remove CheckPayment message
* GUI: consume UUID reply from payment initiator
* API: reply with JSON encoded response if the queried element wasn't found
* Return a payment request object in /receive
* Remove limit of pending payment requests!
* Avoid printing "null" fields when serializing an invoice to json
* Add index on paymentDb.sent_payments.payment_hash
* Order results in descending order in listPaymentRequest
* Electrum: do not persist transaction locks (#953)
Locks held on utxos that are used in unpublished funding transactions should not be persisted.
If the app is stopped before the funding transaction has been published the channel is forgotten
and so should be locks on its funding tx utxos.
* Added a timeout for channel open request (#928)
Until now, if the peer is unresponsive (typically doesn't respond to
`open_channel` or `funding_created`), we waited indefinitely, or until the
connection closed.
It translated to an API timeout for users, and uncertainty about the
state of the channel.
This PR:
- adds an optional `--openTimeoutSeconds` timeout to the `open` endpoint, that will
actively cancel the channel opening if it takes too long before reaching
state `WAIT_FOR_FUNDING_CONFIRMED`.
- makes the `ask` timeout configurable per request with a new `--timeoutSeconds`
- makes the akka http timeout slightly greater than the `ask` timeout
Ask timeout is set to 30s by default.
* Set `MAX_BUFFERED` to 1,000,000 (#948)
Note that this doesn't mean that we will buffer 1M objects in memory:
those are just pointers to (mostly) network announcements that already
exist in our routing table.
Routing table has recently gone over 100K elements (nodes,
announcements, updates) and this causes the connection to be closed when
peer requests a full initial sync.
* Fix Dockerfile maven binary checksum (#956)
The Maven 3.6.0 SHA256 checksum was invalid and caused the docker build to fail.
* Add channel errors in audit db (#955)
We now keep track of all local/remote channel errors in the audit db.
* Added simple plugin support (#927)
Using org.clapper:classutil library and a very simple `Plugin` interface.
* Live channel database backup (#951)
* Backup running channel database when needed
Every time our channel database needs to be persisted, we create a backup which is always
safe to copy even when the system is busy.
* Upgrade sqlite-jdbc to 3.27.2.1
* BackupHandler: use a specific bounded mailbox
BackupHandler is now private, users have to call BackupHandler.props() which always
specifies our custom bounded maibox.
* BackupHandler: use a specific threadpool with a single thread
* Add backup notification script
Once a new backup has been created, call an optional user defined script.
* Update readme with bitcoin 0.17 instructions (#958)
This has somehow been missed by PR #826.
* Backup: explicitely specify move options (#960)
* Backup: explicitely specify move options
We now specify that we want to atomically overwrite the existing backup file with the new one (fixes
a potential issue on Windows).
We also publish a specific notification when the backup process has been completed.
* Print stack trace when crashing during boot sequence (#949)
* Print stack trace when crashing during boot sequence
* Use friendly message when db compatibility check fails
* ElectrumWallet should not send ready if syncing (#963)
This commit is already embedded in version `0.2-android-beta22`.
* Channel: Log additional data (#943)
* Channel: Log additional data
Log local channel parameters, and our peer's open or accept message.
This should be enough to recompute keys needed to recover funds in case of unilateral close.
* Electrum: make debug logs shorter (#964)
* Better handling of closed channels (#944)
* Remove closed channels when application starts
If the app is stopped just after a channel has transition from CLOSING to CLOSED, when the application starts again if will be restored as CLOSING. This commit checks channel data and remove closed channels instead of restoring them.
* Channels Database: tag closed channels but don't delete them
Instead we add a new `closed` column that we check when we restore channels.
* Document how we check and remove closed channels on startup
* Do not print the stacktrace on stderr when there is an error at boot (#966)
* Do not print the stacktrace on stdout when there is an error at boot
* Fix flaky test in PaymentLifecycleSpec (#967)
* Use local random pamentHash for each test in paymentlifecyclespec, intercept the route request before the router.
* Rename `eclair.bak` to `eclair.sqlite.bak` (#968)
This removes any ambiguity about what the content of the file is about.
* Fixed concurrency issue in `IndexedObservableList` (#961)
Update map with new indexes after element is removed
Fixes#915
* Various fix and improvements in time/timestamp handling (#971)
This PR standardizes the way we compute the current time as unix timestamp
- Scala's Platform is used and the conversion is done via scala's concurrent.duration facilities
- Java's Instant has been replaced due to broken compatibility with android
- AuditDB events use milliseconds (fixes#970)
- PaymentDB events use milliseconds
- Query filters for AuditDB and PaymentDB use seconds
* API: Support query by `channelId` or `shortChannelId` everywhere (#969)
Add support for querying a channel information by its `shortChannelId`.
* Smarter strategy for sending `channel_update`s (#950)
The goal is to prevent sending a lot of updates for flappy channels.
Instead of sending a disabled `channel_update` after each disconnection,
we now wait for a payment to try to route through the channel and only
then reply with a disabled `channel_update` and broadcast it on the
network.
The reason is that in case of a disconnection, if noone cares about that
channel then there is no reason to tell everyone about its current
(disconnected) state.
In addition to that, when switching from `SYNCING`->`NORMAL`, instead
of emitting a new `channel_update` with flag=enabled right away, we wait
a little bit and send it later. We also don't send a new `channel_update` if
it is identical to the previous one (except if the previous one is outdated).
This way, if a connection to a peer is unstable and we keep getting
disconnected/reconnected, we won't spam the network.
The extra delay allows us to remove the change made in #888, which was
a workaround in case we generated `channel_update` too quickly.
Also, increased refresh interval from 7 days to 10 days. There was no
need to be so conservative.
Note that on startup we still need to re-send `channel_update` for all
channels in order to properly initialize the `Router` and the `Relayer`.
Otherwise they won't know about those channels, and e.g. the
`Relayer` will return `UnknownNextPeer` errors.
But we don't need to create new `channel_update`s in most cases, so
this should have little or no impact to gossip because our peers will
already know the updates and will filter them out.
On the other hand, if some global parameters (like relaying fees) are
changed, it will cause the creation a new `channel_update` for all
channels.
* Fixed overflow issue with max duration (#975)
This is a regression caused by #971, because `Duration` has a max value of `Long.MaxValue` *nanoseconds*, not *seconds*.
* Use proper closing type in `ChannelClosed` event (#977)
There was actually a change introduced by #944 where we used
`ClosingType.toString` instead of manually defining types, causing a
regression in the audit database.
* Update bash autocompletion for eclair-cli (#983)
* Update bash autocompletition file to suggest all the endpoints
* Update list of commands in eclair-cli help message
* Replace `UnknownPaymentHash` and `IncorrectPaymentAmount` with `IncorrectOrUnknownPaymentDetails` (#984)
See https://github.com/lightningnetwork/lightning-rfc/pull/516 and https://github.com/lightningnetwork/lightning-rfc/pull/544
* Wireshark dissector support (#981)
* Transport: add support for encryption key logging.
This is the format the wireshark lightning-dissector uses to be able to decrypt lightning messages.
* Enrich test for internal eclair API implementation (fr.acinq.eclair.Eclair.scala) (#938)
* Add test to EclairImpl for `/send`, `/allupdates` and `/forceclose/`
* Set default chain to "mainnet" (#989)
Eclair is now configured to run on mainnet by default.
* Set tcp client timeout to 20s (#990)
So that it fails before the ask/api time out.
* Add bot support for code coverage (codecov) (#982)
* Add scoverage-maven-plugin dependency
* Update travis build to generate a scoverage report
* Add custom codecov configuration to have nice PR comments
* Add badge for test coverage in readme
* Accept `commit_sig` without changes (#988)
LND sometimes sends a new signature without any changes, which is a
(harmless) spec violation.
Note that the test was previously not failing because it wasn't specific
enough. The test now fails and has been ignored.
* Ignore subprojects eclair-node/eclair-node-gui in the codecov report (#991)
* Use bitcoind fee estimator first (#987)
* use bitcoind fee provider first
* set default `smooth-feerate-window`=6
* Configuration: increase fee rate mismatch threshold
We wil accept fee rates that up to 8x bigger or smaller than our local fee rate
* Updated license header (#992)
* Release v0.3 (#994)
* gui: include javafx native libraries for windows, mac, linux
* Release v0.3
* Set version to 0.3.1-SNAPSHOT
* Improved test coverage of `io` package (#996)
* improved test coverage of `NodeURI`
* improved test coverage of `Peer`
* Fix TextUI
* BackupHandler: use renameTo() on Android
Most Path methods are not available at our current API level
* Use bitcoin-lib 0.11, which embeds libsecp256k1
* Unit tests: generate dummy sig from 32 random bytes
We now use a version of bitcoin-lib which embeds JNI bindings for libsecp256k1,
and it will only sign data that is 32 bytes long (in Bitcoin and LN you always
sign data hashes, not the actual data).
* Use maven 3.6.0 and a different mirror
* RoutingSyncSpec: don't create databases at init time
We called nodeParams which created a new in-memory sqlite database everytime we created "fake" routing info
* Upgrade to JDK11
Eclair can be built and used on Oracle JDK 1.8 or OpenJDK 11.
JavaFX is now embedded in eclair-node-gui and does not need to be installed separately.
* Install: update java download links
OpenJDK 11 is now our recommendation. Tell users to download java from https://jdk.java.net/11
* README: Rewrite installation instructions
* updated to scalatest 3.0.5
* use scalatest runner instead of junit
Output is far more readable, and makes console (incl. travis) reports
actually usable.
Turned off test logs as error reporting is enough to figure out what
happens.
The only downside is that we can't use junit's categories to group
tests, like we did for docker related tests. We could use nested suites,
but that seems to be overkill so I just removed the categories. Users
will only have the possibility to either skip/run all tests.
* update scala-maven-plugin to 3.4.2
NB: This requires maven 3.5.4, which means that we currently need to
manually install maven on travis.
Also updated Docker java version to 8u181 (8u171 for compiling).
* add basic electrum wallet test
our wallet connects to a dockerized electrumx server
* electrum: clean up tests, and add watcher docker tests
* electrum wallet: fix balance computation issue
when different keys produced the exact same confirmed + unconfirmed balances, we
would compute an invalid balance because these duplicates would be pruned.
* electrum: rename wallet test
* electrum: add a specific test with identical outputs
* electrum: change scripthash balance logging level to debug
* electrum: make docker tests run on windows/mac
Our electrumx docker container needs to contains to bitcoind that is running on the host.
On linux we use the host network mode, which is not available on windows/osx
On windows/osx we use host.docker.internal, which is not available on linux. This
requires docker 18.03 or higher.
Our electrumx docker container needs to contains to bitcoind that
is running on the host.
On linux we use the host network mode, which is not available on windows/osx
On windows/osx we use host.docker.internal, which is not available on linux. This
requires docker 18.03 or higher.
electrum: change scripthash balance logging level to debug
electrum: add a specific test with identical outputs
electrum: rename wallet test
electrum wallet: fix balance computation issue
when different keys produced the exact same confirmed + unconfirmed balances, we
would compute an invalid balance because these duplicates would be pruned.
electrum: clean up tests, and add watcher docker tests
add basic electrum wallet test
our wallet connects to a dockerized electrumx server
* update lightning binaries with versions where most dependencies are statically linked
* run interop tests on travis
* tell travis to use the trusty beta
* interop test: download bitcoind, checkout and compile lightningd
* interop test: fix travis script
* travis interop test: duh...
* interop test: minor cleanup
* reformatting
Squashed commit of the following:
commit 668e6c5b1df18a4e1a1e6d293bc2667dcce67f21
Author: sstone <samuel.stone@hotmail.co.za>
Date: Wed Feb 17 16:11:30 2016 +0100
format pom.xml properly
commit ab8f626145a0e6291da80000b47b4ac42a943b3c
Author: sstone <samuel.stone@hotmail.co.za>
Date: Wed Feb 17 15:47:22 2016 +0100
fix pom.xml
commit 068afa08d6b498ec2f46b5b4addea676e199d228
Author: sstone <samuel.stone@hotmail.co.za>
Date: Wed Feb 17 15:20:07 2016 +0100
mvn does not need . on the PATH anymore
