This is a final sweep to match the current BOLT12 text:
1563d13999d342680140c693de0b9d65aa522372 ("More bolt12 test vectors.")
Only two code changes, to change the order of checks to match the bolt,
and to give a warning on decode if a path is empty.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
invoice_path_id is actually a generic path_id thing, so rename it.
We're going to use the same scheme for path secrets and the tweak to
node_id when we create a fake pubkey for invoice_requests, so a new
header is appropriate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The latest spec allows this to be omitted iff there is a blinded path
and it would be made up anyway.
In that case, the key they will use to sign the invoice will be the final
blinded key in the path we use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The latest draft allows these experimental ranges, which involves more
changes than I expected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: handle experimental ranges in offers/invoice_requests/invoices.
Changelog-Added: Protocol: pay can now pay to bolt12 invoices if entry to blinded hop is specified as a short_channel_id (rather than node id).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use this for invoices published by unannounced nodes: want
something very similar for offers, so generalize and expose it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we can specify a blinded path in an offer, we have to check they
used it (or didn't use it, if we didn't have one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
send_onion_reply() does that for us now, so we don't need to do it up-front.
Simplifies the code quite a bit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And make it use inject_onionmessage. This means we have to be more careful
in createinvoice_done where we had a payload field allocated off tmpctx.
The new code correctly handles the case where we find a path (not just
a peer!) to the start of a blinded path, and need to join the paths.
It worked before if we had to connect directly, just not in the case
where we actually found a usable route of more than 1 hop.
Changelog-EXPERIMENTAL: fixed: onionmessage replies now work even if we need to route to the start of the blinded reply path.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means only a single gossmap, and they already share the fetchinvoice-noconnect option
and autoconnect code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: the `fetchinvoice` plugin has been combined into the `offers` plugin.
Without this, it was broken because our peer will no longer forward
via scids for private channels. We could use the scid alias, but the
node id is right at hand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can disable this with `fetchinvoice-noconnect`.
Changelog-EXPERIMENTAL: We will now reply to invoice_request messages even if reply path requires us to make an outgoing connection (LDK does this)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't actually support it yet, but this threads through the type change,
puts it in "decode" etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This has the benefit of being shorter, as well as more reliable (you
will get a link error if we can't print it, not a runtime one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-offers" BOLTVERSION=guilt/offers
```
In this case, only trivial mods.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer have to refer back to the offer for which we're making
the invoice_request, or to the invoice_request we made for an invoice,
as they are all mirrored (and we check!).
It's clearer to simply look at the object directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just to a direct peer, and we only create one, but this is
enough to test, and make payments to non-public nodes work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly, field name changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: Support for forwarding blinded payments (as per latest draft)
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
Rather than a generic "add member", provide two routines: one which
doesn't quote, and one which does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Requiring the caller to allocate them is ugly, and differs from
other types.
This means we need a context arg if we don't have one already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more "towire_offer", but "towire_tlv_offer".
This means we double-up on the unfortunately-named `tlv_payload` inside
the onion, but we should rename that in the spec when we remove
old payloads.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this changes the name of a field in invoice_request:
`payer_signature` becomes simply `signature`. So we allow both for
now, and send the old one unless deprecated_apis is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As of 2b923a0367c5f9154fcec706e3302cc4658dd889.
Recurrence quotes need to be marked separately, since they're no longer
in offers main bolt.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's very similar to the previous, but there are a few changes:
1. The enctlv fields are numbered differently.
2. The message itself is a different number.
The onionmsg_path type is the same, however, so we keep that constant
at least.
The result is a lot of cut & paste, but we will delete the old one
next release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
