Also, change the values to match the spec values (I made the
to_self_delays different to catch more bugs).
Suggested-by: @niftynei
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is also required for actually creating usable onions. For the moment,
due to API limitations, we only let them set realm 0.
Note that the privkey parsing was broken, requiring an additional two
hex digits, overflowing the buffer, and were ignored.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add odd-length string can never be valid hex!
In addition, don't try to print the next hop if there isn't one, but
always print the (raw) payload.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows for complete channel simulation, including HTLC
transactions, but means we use higher-level primitives to
make the easy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These utilities allow us to create valid test txs and information given both
sides' complete set of secrets.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us use it as an interactive driver of conversation, rather
than writing all packets then reading all packets.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
updates the bolt version to 6639cef095a2ecc7b8f0c48c6e7f2f906fbfbc58.
this requires us to use the new bolt parser at generate-bolt.py
and updates to all of the type specifications (ie. from u8 -> byte)
I decided to try a faster implementation, only to find our crc32c was
not correct! Ouch.
I removed the crc32c functions from ccan/crc, and added a new crc32c
module which has the Mark Adler x86-64-optimized variants.
We bump gossip_store version again, since csums have changed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need the timestamp for channel_announcement, but this is simplified
because MCP always follows the channel_announcement by a channel_update.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(We don't increment the gossip_store version, since there are only a
few commits since the last time we did this).
This lets the reader simply filter messages; this is especially nice since
the channel_announcement timestamp is *derived*, not in the actual message.
This also creates a 'struct gossip_hdr' which makes the code a bit
clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the high bit of the length field: this way we can still check
that the checksums are valid on deleted fields.
Once this is done, serially reading the gossip_store file will result
in a complete, ordered, minimal gossip broadcast. Also, the horrible
corner case where we might try to delete things from the store during
load time is completely gone: we only load non-deleted things.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Initialize infd to STDIN_FILENO if the input file argument is missing.
Caught with gcc version: 7.4.0
devtools/create-gossipstore.c: In function ‘main’:
devtools/create-gossipstore.c:130:9: error: ‘infd’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
while (read_all(infd, &be_inlen, sizeof(be_inlen))) {
Suggested-by: @ZmnSCPxj <https://github.com/ElementsProject/lightning/pull/2674#issuecomment-495617253>
Signed-off-by: William Casarin <jb55@jb55.com>
Save some overhead, plus gets us ready for giving subdaemons direct
store access. This is the first time we *upgrade* the gossip_store,
rather than just discarding.
The downside is that we need to add an extra message after each
channel_announcement, containing the channel capacity.
After:
store_load_msec:28337-30288(28975+/-7.4e+02)
vsz_kb:582304-582316(582306+/-4.8)
store_rewrite_sec:11.240000-11.800000(11.55+/-0.21)
listnodes_sec:1.800000-1.880000(1.84+/-0.028)
listchannels_sec:22.690000-26.260000(23.878+/-1.3)
routing_sec:2.280000-9.570000(6.842+/-2.8)
peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Differences:
-vsz_kb:582320
+vsz_kb:582316
-listnodes_sec:2.100000-2.170000(2.118+/-0.026)
+listnodes_sec:1.800000-1.880000(1.84+/-0.028)
-peer_write_all_sec:51.600000-52.550000(52.188+/-0.34)
+peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[devtools/create-gossipstore.c:153]: (error) Uninitialized variable: scidsats
scidsats access is gated by csvfile, which means this warning is a false
positive. However, it's cleaner to gate scidsts on itself, rather than
the cmdline option which caused it to be populated, so do that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The chainparams are needed to know the prefixes, so instead of passing down
the testnet, we pass the entire params struct.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
added sanity check to make sure scid of csv is the same as scid in gossip.
Revised style, mem allocation, and error checks
[ Minor fixups, and updated benchmark script -- RR ]
With data.tar.gz: 456609740 Apr 2 12:33
store_load_msec:35300-42354(37118.2+/-2.7e+03)
vsz_kb:582832
store_rewrite_sec:12.700000-13.430000(12.988+/-0.27)
listnodes_sec:3.000000-3.160000(3.076+/-0.057)
listchannels_sec:30.790000-31.690000(31.03+/-0.34)
routing_sec:0.00
peer_write_all_sec:63.640000-67.860000(66.294+/-1.4)
This fixes block parsing on testnet; specifically, non-standard tx versions.
We hit a type bug in libwally (wallt_get_secp_context()) which I had to
work around for the moment, and the updated libsecp adds an optional hash
function arg to the ECDH function.
Fixes: #2563
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
on gcc (GCC) 7.4.0
devtools/create-gossipstore.c: In function ‘load_scid_file’:
devtools/create-gossipstore.c:22:9: error: ignoring return value of ‘fscanf’ ...
fscanf(scidfd, "%d\n", &n);
^~~~~~~~~~~~~~~~~~~~~~~~~~
devtools/create-gossipstore.c:24:9: error: ignoring return value of ‘fscanf’ ...
fscanf(scidfd, "%s\n", title);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [<builtin>: devtools/create-gossipstore.o] Error 1
Signed-off-by: William Casarin <jb55@jb55.com>
on gcc (GCC) 7.4.0
devtools/create-gossipstore.c: In function ‘main’:
devtools/create-gossipstore.c:107:9: error: ‘infd’ may be used uninitialized ..
while (read_all(infd, &be_inlen, sizeof(be_inlen))) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: William Casarin <jb55@jb55.com>
fixup printing methods in devtools/decodemsg such that TLV's can
now be printed as well. here's how you'd use it:
$ ./devtools/decodemsg --tlv opening_tlv 0120001E020202020202020202020202020202020202020202020202020202020202
> WIRE_OPTION_UPFRONT_SHUTDOWN_SCRIPT (size 32):
> shutdown_scriptpubkey=[020202020202020202020202020202020202020202020202020202020202]
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Basically we tell it that every field ending in '_msat' is a struct
amount_msat, and 'satoshis' is an amount_sat. The exceptions are
channel_update's fee_base_msat which is a u32, and
final_incorrect_htlc_amount's incoming_htlc_amt which is also a
'struct amount_msat'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's more natural than using a zero-secret when something goes wrong.
Also note that the HSM will actually kill the connection if the ECDH
fails, which is fortunately statistically unlikely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is kind of a hack, but let's make it a complete hack. GCC with
-flto noticed we use different definitions of 'struct io_conn' here
and gave the warning:
ccan/ccan/io/io.h:620:17: warning: type of ‘io_close’ does not match original declaration [-Wlto-type-mismatch]
struct io_plan *io_close(struct io_conn *conn);
^
ccan/ccan/io/io.c:449:17: note: ‘io_close’ was previously declared here
struct io_plan *io_close(struct io_conn *conn)
^
ccan/ccan/io/io.c:449:17: note: code may be misoptimized unless -fno-strict-aliasing is used
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
