technically we don't need this info after the channel opens, but for any
subsequent RBF (and maybe splice?) we need to remember what the
open/accept peer signaled
not amazing, since we'll probably call openchannel_update multiple
times per open, but this is the simplest way to confirm that we're
not sending unconfirmed outputs to peer.
This will save a lot of RPC ping/pong when plugins still need to iterate
both, `listpeers` and `listpeerchannels`. When `num_channels` is 0 they
can skip additional calls.
Changelog-Added: RPC `listpeers` output now has `num_channels`.
Though there's already a `createinvoice` command, there are usecases where a
user may want to sign an invoice that they don't yet have the preimage to. For
example, they may have an htlc_accepted plugin that pays to obtain the preimage
from someone else and returns a `{ "result": "resolve", ... }`.
This RPC command addresses this usecase without overly complicating the
semantics of the existing `createinvoice` command.
Changelog-Added: JSON-RPC: `signinvoice` new command to sign BOLT11
invoices.
This allows to accept safely long paths as options
and does not truncate them
as https://github.com/ElementsProject/lightning/issues/5576
described
Changelog-Fixed: cli: accepts long paths as options
Suggested-by: @rustyrussell <rusty@rustcorp.com.au>
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
In v0.11 (71f736678f) we changed lightningd to wait for gossipd to
acknowledge blocks before updating blockheight: this resolved a problem
which lnprototest had where it wanted to know when we'd fully digested
a block.
However, it broke the syncing case: until then we don't even tell
gossipd, so this stayed at zero. We should use the current blockheight
for that corner case!
Fixes: #5894
Changelog-Fixed: JSON-RPC: `getinfo` `blockheight` no longer sits on 0 while we sync with bitcoind the first time.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
```
----------------------------- Captured stderr call -----------------------------
Sending onchaind an invalid message 03ed00000000000000004e52a9129a66619d6809b1024eb9a0159f173a988f3a5d0bdd2447b4fcc24cef
lightningd: FATAL SIGNAL 6 (version 3c57147-modded)
```
The channel state can also be `FUNDING_SPEND_SEEN` if onchaind is still
starting up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In various circumstances we can start a reconnection while one is
already going on. These can stockpile if the node really is unreachable.
Reported-by: @whitslack
Fixes: #5654
Changelog-Fixed: lightningd: we no longer stack multiple reconnection attempts if connections fail.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The leak-detector can't find unconnected_htlcs_in on the stack and
incorrectly flags this as a leak. However, it is appropriately tal
allocated and freed.
Changelog-None
There were cases where address it's empty, and this cases are not right if the
field is considered optional.
This makes it required and add the field also when `--offline` is set.
Changelog-Changed: JSON-RPC: `getinfo` `address` array is always present (though may be empty)
We need to check if the key parameter is an empty array in
`listdatastore` as we do assume an array of at least length 1 in
`wallet.c:5306`.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-onion-message" BOLTVERSION=guilt/offers
```
Mainly textual, though I neatened the extra fields check for TLVs with
blinding, and implemented the "no other fields" requirement for
non-final onion message hops.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-route-blinding" BOLTVERSION=guilt/offers
```
Other than textual changes, this does:
1. Ensures we put total_amount_msat in onion final hop (reported by @t-bast).
2. Require that they put total_amount_msat in onion final hop.
3. Return `invalid_onion_blinding` exactly as defined by the spec (i.e. less
aggressive when we're the final hop) (also reported by @t-bast, but I already
knew).
See: #5823
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `offers` breaking blinded payments change (total_amount_sat required, Eclair compat)
You can use rs->nextcase, but we don't always keep that around, so
keep a flag in onion_payload.
We'll use this in the "do we need to return a blinded error code"
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also, we don't need to pass the total length to the field parsers,
just the length for this field (confusingly, this was called
"data_length").
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will give the user an option to set a custom port when using
discovered IPs for node_announcents. Without this, only the selected
networks default port can used.
Changelog-Added: Adds --announce-addr-discovered-port config option to set custom port for IP discovery.
This switch was not doing anything useful anymore.
We deprecate it anyways to notify the user about the new switch.
Changelog-Deprecated: The old --disable-ip-discovery config switch
This adds the option to explicitly enable ip-discovery, which maybe
helpful for example when a user wants TOR announced along with
discovered IPs to improve connectivity and have TOR just as a fallback.
Changelog-Added: Adds config switch 'announce-addr-discovered': on/off/auto
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
E Global errors:
E - Node /tmp/ltests-adkwu44c/test_logging_1/lightning-2/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "lightningd/peer_control.c:2203 (load_channels_from_wallet)",
E "lightningd/lightningd.c:1105 (main)"
E ],
E "label": "lightningd/peer_control.c:2203:struct htlc_in_map",
E "parents": [
E "lightningd/lightningd.c:107:struct lightningd"
E ],
E "value": "0x55d920a345e8"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `listpeerchannels` now contains information on direct channels with our peers.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We're soon going to call json_add_unsaved_channel and
json_add_uncommitted_channel from a new place, where we want the peer
state directly included.
Based on patch by @vincenzopalazzo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids any confusion between primitive and string ids, and in
particular stops an issue with commando once it starts chaining ids,
that weird ids can be double-escaped and commando will not recognize
the response, leaving the client hanging. It's the client's fault for
using a weird id, but it's still rude (and triggered by our tests!).
It also makes substituting the id in passthrough simpler, FTW.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When a channel is not yet confirmed onchain and only has an alias,
`getroute` will return the alias under the "channel" key. However, if
you supply that to `sendpay`, it will not be able to find the channel
and will fail since it calls `find_channel_for_htlc_add` and that only
looks for channels by their scid and doesn't consider their alias.
This patch makes `find_channel_for_htlc_add` also consider channel
aliases when looking for channels.
Changelog-Fixed: JSON-RPC: `sendpay` now can send to a short-channel-id alias for the first hop.
We were stressing the servers if node cannot be found. Only do lookup
on manual connect commands.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Protocol: lightningd: Only use DNS server address lookup on manual `connect` commands, not normal reconnection attempts.
