I never really liked this hack: websockets are useful, advertizing
them not so much.
Note that we never actually documented that we would advertize these!
Changelog-EXPERIMENTAL: Protocol: Removed support for advertizing websocket addresses in gossip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CI hit this issue where it would get a tx_abort in fundchannel. This
happens when the dualopend we use to query the feerates has not exited
yet (it waits for the tx_abort reply), and we mistakenly reuse it.
With multi-channel support, this is wrong: just run another one and it
all Just Works.
This means we need to rework our dual_open_control.c logic, since it
would previously create an unsaved channel then not clean up if
something went wrong.
Most people will never try to negotiate opening multiple channels to
the same peer at the same time (vs. having an established channel and
opening a new one), so this case is a bit weird.
```
rates = l1.rpc.dev_queryrates(l2.info['id'], amount, amount)
# l1 leases a channel from l2
l1.rpc.fundchannel(l2.info['id'], amount, request_amt=amount,
feerate='{}perkw'.format(feerate),
> compact_lease=rates['compact_lease'])
tests/test_opening.py:1611:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
contrib/pyln-client/pyln/client/lightning.py:833: in fundchannel
return self.call("fundchannel", payload)
contrib/pyln-testing/pyln/testing/utils.py:721: in call
res = LightningRpc.call(self, method, payload, cmdprefix, filter)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <pyln.testing.utils.PrettyPrintingLightningRpc object at 0x7f6cbcd97950>
method = 'fundchannel'
payload = {'amount': 500000, 'announce': True, 'compact_lease': '029a00640064000000644c4b40', 'feerate': '2000perkw', ...}
cmdprefix = None, filter = None
def call(self, method, payload=None, cmdprefix=None, filter=None):
"""Generic call API: you can set cmdprefix here, or set self.cmdprefix
...
if not isinstance(resp, dict):
raise ValueError("Malformed response, response is not a dictionary %s." % resp)
elif "error" in resp:
> raise RpcError(method, payload, resp['error'])
E pyln.client.lightning.RpcError: RPC call failed: method: fundchannel, payload: {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'amount': 500000, 'feerate': '2000perkw', 'announce': True, 'request_amt': 500000, 'compact_lease': '029a00640064000000644c4b40'}, error: {'code': -1, 'message': 'Abort requested', 'data': {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'method': 'openchannel_init'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This currently means anchors tests are disabled, awaiting the
PR which implements zero-fee-htlc anchors to reenable them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using single tuples in Python is ugly, so:
1. Rename wait_for_onchaind_tx to wait_for_onchaind_txs.
2. Make it take tuples explicitly.
3. Make wait_for_onchaind_tx a simpler wrapper/unwrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always call channel_fail_transient() on all channels when a peer
connects, to clean up any previous connections. However, when
we startup, this channel doesn't have an owner yet, resulting in
a fairly weird INFO level message.
Reported-by: Michael Schmook @mschmook
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: `lightningd`: don't log gratuitous "Peer transient failure" message on first connection after restart.
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
This adds the option to explicitly enable ip-discovery, which maybe
helpful for example when a user wants TOR announced along with
discovered IPs to improve connectivity and have TOR just as a fallback.
Changelog-Added: Adds config switch 'announce-addr-discovered': on/off/auto
If we both support large channels, we can actually send giant HTLCs.
This, in turn, fixes pay (which relies on this field!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: `pay` now knows it can use locally-connected wumbo channels for large payments.
Fixes: #5250Fixes: #5417
This is the minimal change to meet the desired outcome of https://github.com/lightning/bolts/issues/934
which wants to give obsolete-db nodes a chance to fix things up, before we
close the channel.
We need to dance around a bit here, since we *will* close the channel if
we receive an ERROR, so we suppress that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a new "chan_dying" message to the gossip_store, but since we
already changed the minor version in this PR, we don't bump it again.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now delay forgetting funding-spent channels for 12 blocks (as per latest BOLTs, to support splicing in future).
Using `listfowards` for this wrong; expose this directly if people
care (and unlike listforwards, which could be deleted, we have to
remember these while the channel is still open!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listhtlcs` new command to list all known HTLCS.
This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
First, how we record "our_funds" and then apply pushes vs lease_fees
(for liquidity ad buys/sales) was exactly opposite.
For pushes we were reporting the total funded into the channel, with the
push representing how much we'd later moved to the peer.
For lease_fees we were rerporting the total in the channel, with the
push representing how much was already moved to the peer.
We fix this (from a view perspective) by re-adding lease fees to what's
reported in the channel funding totals. Since this is now new behavior
(for leased channel values), we added new fields so we can take the old
field names thru a deprecation cycle.
We also make it possible to differentiate btw a push and a lease_fee
(before they were all the same), by adding to new fields to `listpeers`:
`fee_paid_msat` and `fee_rcvd_msat`.
This allows us to avoid math in the bookkeeper, instead we just pick
the numbers out directly and record them.
Fixes#5472
Changelog-Added: JSON-RPC: `listpeers` now has a few new fields for `funding` (`remote_funds_msat`, `local_funds_msat`, `fee_paid_msat`, `fee_rcvd_msat`).
Changelog-Deprecated: JSON-RPC: `listpeers`.`funded` fields `local_msat` and `remote_msat` are now deprecated.
We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
We might only have seen one side of the channel, as shown below. Wait
for both:
```
_____________________________ test_wumbo_channels ______________________________
[gw2] linux -- Python 3.7.13 /opt/hostedtoolcache/Python/3.7.13/x64/bin/python3
node_factory = <pyln.testing.utils.NodeFactory object at 0x7f5d51743b10>
bitcoind = <pyln.testing.utils.BitcoinD object at 0x7f5d51699d10>
@pytest.mark.openchannel('v1')
@pytest.mark.openchannel('v2')
def test_wumbo_channels(node_factory, bitcoind):
l1, l2, l3 = node_factory.get_nodes(3,
opts=[{'large-channels': None},
{'large-channels': None},
{}])
conn = l1.rpc.connect(l2.info['id'], 'localhost', port=l2.port)
expected_features = expected_peer_features(wumbo_channels=True)
if l1.config('experimental-dual-fund'):
expected_features = expected_peer_features(wumbo_channels=True,
extra=[21, 29])
assert conn['features'] == expected_features
assert only_one(l1.rpc.listpeers(l2.info['id'])['peers'])['features'] == expected_features
# Now, can we open a giant channel?
l1.fundwallet(1 << 26)
l1.rpc.fundchannel(l2.info['id'], 1 << 24)
# Get that mined, and announced.
bitcoind.generate_block(6, wait_for_mempool=1)
# Connect l3, get gossip.
l3.rpc.connect(l1.info['id'], 'localhost', port=l1.port)
wait_for(lambda: len(l3.rpc.listnodes(l1.info['id'])['nodes']) == 1)
wait_for(lambda: 'features' in only_one(l3.rpc.listnodes(l1.info['id'])['nodes']))
# Make sure channel capacity is what we expected.
> assert ([c['amount_msat'] for c in l3.rpc.listchannels()['channels']]
== [Millisatoshi(str(1 << 24) + "sat")] * 2)
E assert [16777216000msat] == [16777216000m...777216000msat]
E Right contains one more item: 16777216000msat
E Full diff:
E - [16777216000msat, 16777216000msat]
E + [16777216000msat]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was weird. Here is the message (with \n turned into real new lines):
```
2022-07-24T07:20:08.9144998Z Plugin '/home/runner/work/lightning/lightning/tests/plugins/dblog.py' returned an invalid response to the db_write hook: {"jsonrpc": "2.0", "id": 40, "error": {"code": -32600, "message": "Error while processing db_write: UNIQUE constraint failed: shachain_known.shachain_id, shachain_known.pos", "traceback": "Traceback (most recent call last):
File \"/home/runner/work/lightning/lightning/contrib/pyln-client/pyln/client/plugin.py\", line 631, in _dispatch_request
result = self._exec_func(method.func, request)
File \"/home/runner/work/lightning/lightning/contrib/pyln-client/pyln/client/plugin.py\", line 616, in _exec_func
return func(*ba.args, **ba.kwargs)
File \"/home/runner/work/lightning/lightning/tests/plugins/dblog.py\", line 45, in db_write
plugin.conn.execute(c)
sqlite3.IntegrityError: UNIQUE constraint failed: shachain_known.shachain_id, shachain_known.pos
"}}
```
Finally, I realized that we *kill* l2: this means it has updated the
plugin db but not the real db. This is expected: a real backup plugin
would handle this case.
Simply disable the test for this case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Dualopend is not listening to the peer fd when it hangs up, so doesn't
notice it's gone. We don't clean up the channel until it's done (usually
a good thing: it could be about to lock it in), but this harms us
here.
Fix the test failure and make a comment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Connectd already does this when we *receive* an error or warning, but
now do it on send. This causes some slight behavior change: we don't
disconnect when we close a channel, for example (our behaviour here
has been inconsistent across versions, depending on the code).
When connectd is told to disconnect, it now does so immediately, and
doesn't wait for subds to drain etc. That simplifies the manual
disconnect case, which now cleans up as it would from any other
disconnection when connectd says it's disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In various places, we assumed that when `connected` is false,
everything is finished. This is not true: we should wait for the
state we expect.
In addition, various places allows reconnections, which interfered
with the logic; suppress them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to avoid lost messages in the common cases.
This generalizes our drain code, by giving the subds each 5 seconds to
close themselves, but continue to allow them to send us traffic (if
peer is still connected) and continue to send them traffic.
We continue to send traffic *out* to the peer (if it's still
connected), until all subds are gone. We still have a 5 second timer
to close the connection to peer.
On reconnects, we don't do this "drain period" on reconnects: we kill
immediately.
We fix up one test which was looking for the "disconnect" message
explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's caused by a reconnection race: we hold the new incoming connection while we
ask lightningd to kill the old connection. But under some circumstances we leave
the new incoming hanging (with, in this case, old reestablish messages unread!)
and another connection comes in.
Then, later we service the long-gone "incoming" connection, channeld
reads the ancient reestablish message and gets upset.
This test used to hang, but now we've fixed reconnection races it is fine.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Got complaints about us hanging up on some nodes because they don't respond
to pings in a timely manner (e.g. ACINQ?), but that turned out to be something
else.
Nonetheless, we've had reports in the past of LND badly prioritizing gossip
traffic, and thus important messages can get queued behind gossip dumps!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: connectd: give busy peers more time to respond to pings.
If we can't broadcast the tx, confirm that it didn't end up in the
mempool or the utxo set before throwing an error.
Note that this doesn't protect us in the case where the funding
output has already been *spent*... but that's extremely rare, right?
Fixes#5296
Reported-By: @rustyrussell
Collab-With: @vincenzopalazzo
