We use ephemeral_port_reserve to grab ports, but this can fail when we
restart a node, since the port can be reallocated at that point.
Attempt to overcome this using a global reserved list (is there a
neater way?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can sneak the HTLC add in before we do the update_fee which fails:
```
# the channel should start warning -- too much dust
inv = l2.rpc.invoice(htlc_val_msat, str(num_dusty_htlcs + 1), str(num_dusty_htlcs + 1))
with pytest.raises(RpcError, match=r'WIRE_TEMPORARY_CHANNEL_FAILURE'):
> l1.rpc.sendpay(route, inv['payment_hash'], payment_secret=inv['payment_secret'])
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
tests/test_pay.py:2654: Failed
```
From the logs:
```
lightningd-1: 2022-05-20T02:16:40.008Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: NEW:: HTLC LOCAL 14 = SENT_ADD_HTLC/RCVD_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.010Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: Adding HTLC 14 amount=10000000msat cltv=113 gave CHANNEL_ERR_ADD_OK
lightningd-1: 2022-05-20T02:16:40.012Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_UPDATE_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.015Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: REPLY WIRE_CHANNELD_OFFER_HTLC_REPLY with 0 fds
lightningd-1: 2022-05-20T02:16:40.026Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_WARNING
lightningd-1: 2022-05-20T02:16:40.029Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: billboard perm: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.035Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.039Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-lightningd: Will try reconnect in 60 seconds
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Nodes now spray their own gossip at the start; this can race with
our query, and they can give us gossip we didn't ask for.
The fix is to always query an uninvolved node: in this case, we
only connected l3 and l4 to test zlib, which is gone, so now we can
remove that and simply always query l4.
```
2022-05-23T01:32:53.4695809Z # reply_channel_range == 264
2022-05-23T01:32:53.4696416Z > assert msgs == ['0108'
2022-05-23T01:32:53.4696835Z # blockhash
2022-05-23T01:32:53.4697328Z + genesis_blockhash
2022-05-23T01:32:53.4697841Z # first_blocknum, number_of_blocks, complete
2022-05-23T01:32:53.4698685Z + format(0, '08x') + format(65535, '08x') + '01'
2022-05-23T01:32:53.4699245Z # encoded_short_ids
2022-05-23T01:32:53.4699859Z + format(len(encoded) // 2, '04x')
2022-05-23T01:32:53.4700255Z + encoded]
2022-05-23T01:32:53.4700799Z E AssertionError: assert ['0100194b419...700000010000'] == ['010806226e4...700000010000']
2022-05-23T01:32:53.4710678Z E At index 0 diff: '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' != '010806226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f000000000000ffff01001900000068000001000100006900000100000000700000010000'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't get the second channel_announcement in the filter:
```
# Now choose range which will only give second update.
msgs = l4.query_gossip('gossip_timestamp_filter',
genesis_blockhash,
after_12 - backdate,
after_23 - after_12 + 1,
filters=['0109', '0012'])
# 0x0100 = channel_announcement
# 0x0102 = channel_update
# (Node announcement may have any timestamp)
types = Counter([m[0:4] for m in msgs])
> assert types['0100'] == 1
E assert 0 == 1
```
Looking at the gossip store:
```
1089: t=1653008725 channel_announcement: 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
1533: channel_amount: 100000sat
1555: t=1653008725 channel_update: 01022b98e7d680ffa8096d0a2bda62c0b8b3fc975a5f91c0cff0a42a76b37285276c0156581f85c0be2ee0ed7e7003cb67f5d476a7e3714960836b882bb3ad78097406226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f00006e00000100006286e955010000060000000000000000000000010000000a0000000005e69ec0
1705: t=1653008729 node_announcement: 010175f8ed9f48db511d43f1da96aa307ccc53a521dcc2f8fb732c6938650e6cc00f672e772134a29e16b723a1e9cf626cf942323bd3fa294befd25430a9395c1fa40007800000080269a26286e959035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d035d2b484f5050494e47464952452d34646636366661000000000000000000000000000000
1866: t=1653008720 channel_update: 010266385083f1d6e554e1701f2456c24212c5aa937f7b090d32d243678b2fe78f7f52ed3626d6cdd52703bf78013bb9d1a621ae5b7d68fc965d29bb94574e340b5606226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f00006e00000100006286e950010100060000000000000000000000010000000a00000
```
It's not clear what we times we were querying, but let's make it
clearer by putting a full 10 seconds between them, and making our
queries more exact.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Over time, it has cost us more developer cycles than it has gained.
It has hidden intermittant bugs, and allowed cruft to accumulate:
when we eventually tried to figure out what was going wrong, the
actual change which caused it was now stale and forgotten.
This was a particular bane during the connectd rewrite, and I
worked through some issues which had occurred before, but were not
more likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
Changelog-Fixed: signmessage: improve the UX of the rpc command when zbase is not a valid one
Stacktrace generated with a bad `zbase`
```
lightningd: lightningd/signmessage.c:59: from_zbase32: Assertion `len == tal_bytelen(u8arr)' failed
lightningd: FATAL SIGNAL 6 (version v0.11.1)
0x55b9b1b4e617 send_backtrace
[...]
```
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This changes many fields: in non-deprecated mode, they're now raw integers.
This was always the intention, but the transition was never completed.
Suggested-By: @ShahanaFarooqui
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: "_msat" fields can be raw numbers, not "123msat" strings (please handle both!)
Changelog-Deprecated: JSON-RPC: "_msat" fields as "123msat" strings (will be only numbers)
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
The new msat fields are turned into Millisatoshi, so handle that correctly
too in tests too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `coin_movement` notification: `balance`, `credit`, `debit` and `fees` (use `balance_msat`, `credit_msat`, `debit_msat` and `fees_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Before this fix, there was the situation where a DEVELOPER=1 node would
announce non-public addresses on mainnet if detected. Since there
are some nodes on the internet that falsely report local addresses
we move this 'testing feature' to 'dev-allow-locahost' nodes.
Changelog-None
This was eliminated this morning in the latest spec. We still accept them,
we just don't produce them any more.
Changelog-Removed: Protocol: We no longer create gossip messages which use zlib encoding (we still understand them, for now!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We call out to connectd to activate the peer, and while we do that,
channel->owner is NULL. A better pattern would be to set up the unsaved
channel once connectd has given us the peer, but this works for now.
Fixes: #5204
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were setting it on the root, but that doesn't get handed to
sendpay. Our schema doesn't *require* bolt11, either, so this was
missed (there could be a *bolt12* instead).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `listpays` always includes `bolt11` or `bolt12` field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has `description` parameter, will be required if bolt11 only has a hash.
Changelog-Deprecated: JSON-RPC: `pay` for a bolt11 which uses a `description_hash`, without setting `description`.
This is what LND does, and it's better for upper layers than trying to
twist our maxfeepercent / exemptfee heuristics to suit.
(I don't remember who complained about this, sorry!)
I'm doing this now because I want to add YA parameter next!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has new parameter `maxfee` for setting absolute fee (instead of using `maxfeepercent` and/or `exemptfee`)
I think the new pay command has proven itself in the last 18 months!
Also various pay tests took "compat" then didn't use it, so clean them
up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSON-RPC: `legacypay` (`pay` replaced it in 0.9.0).
Trips on our RPC checking introduced at the same time: msat should be
an integer or an "xxxmsat"/sat/btc string.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
So far we were papering over the actual error with a generic string
that isn't very useful. Now we decode the error and forward it through
the grpc layer as well (though still as a string).
Makes types harder, and I've never personally used them.
Changelog-Deprecated: JSON-RPC: `invoice` `expiry` no longer allowed to be a string with suffix, use an integer number of seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make it always a number; this makes the JSON request specification
simpler. We allowed a number since v0.10.1.
(reserve=True is the default anyway, so usually it can be omitted:
reserve=False becomes reserve=0).
Changelog-Deprecated: JSON-RPC: `fundpsbt`/`utxopsbt` `reserve` must be a number, not bool (for `true` use 72/don't specify, for `false` use 0). Numbers have been allowed since v0.10.1.
I have a separate branch which fixes this race properly, but it's not anything
to do with this PR.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
