Now we're not always using the same functions to watch during
dual-funding opening, we need to make sure we're watching the close
(in particular, df close before the opening is confirmed).
So, keep a pointer, and if it's not set in drop_to_chain, set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The latter is used when we're put in the db, the former is the uncommitted state.
Currently dbid == 0 is used in addition to the state, which is unwieldy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Experimental: JSON-RPC: added new dual-funding state `DUALOPEND_OPEN_COMMITTED`
We should use capability tests for states (can you add htlcs?) rather than vague
descriptions (are you closing?).
And as much as possible, use switch () statements to force us to think
about all the cases, especially when we add new states!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not just if htlc addition is too slow, make this the default. dual-open's txabort
is excluded, however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don’t send the funding spend to onchaind if we detect it in inflights (aka. a splice). While we already prevented onchaind_funding_spent from being called directly, the call to wallet_channeltxs_add meant onchaind_funding_spent would be called *anyway* on restart. This is now fixed.
Additionally there was a potential for a race problem depending on the firing order of the channel depth and and funding spent events.
Instead of requiring these events fire in a specific order, we make a special “memory only” inflight object to prevent the race regardless of firing order.
Changelog-Fixed: Splice: bugfix for restart related race condition interacting with adversarial close detection.
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
If they have invalid runes, we bail, but if they have runes which used
a different master secret (old commando.py allowed you to override
secret), we just complain and delete them.
Note that this requires more mocks in wallet/test/run-db.c...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`struct log` becomes `struct logger`, and the member which points to the
`struct log_book` becomes `->log_book` not `->lr`.
Also, we don't need to keep the log_book in struct plugin, since it has
access to ld's log_book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
It's not likely but possible that the node's settings will shift btw a
start and an RBF; we persist the setting to the database so we don't
lose it.
Right now holding onto it forever is kind of extra but maybe we'll
reuse the setting for splices? idk.
Should this be a channel type??
technically we don't need this info after the channel opens, but for any
subsequent RBF (and maybe splice?) we need to remember what the
open/accept peer signaled
not amazing, since we'll probably call openchannel_update multiple
times per open, but this is the simplest way to confirm that we're
not sending unconfirmed outputs to peer.
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
Otherwise what the hook sees is actually a lie, and if it sets it
we might override it.
The side effect is that we add an explicit "forward_to" field, and
allow hooks to override it. This lets a *hook* control channel
choice explicitly.
Changelod-Added: Plugins: `htlc_accepted_hook` return can specify what channel to forward htlc to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were double counting channel lease fees because we were double firing
the channel open event sequence (so to speak). If we don't report
balances for unopened channels, we don't have this problem?
Changelog-Changed: Plugins: `balance_snapshot` notification does not send balances for channels that aren't locked-in/opened yet
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's directly a product of "does it have a current owner subdaemon"
and "does that subdaemon talk to peers", so create a helper function
which just evaluates that instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to agree up on the `minimum_depth` with the peer, thus when
they told us that the funding locked we'd be sure we either have a
scid or we'd trigger the state transition when we do. However if we
had a scid, and we got a funding_locked we'd trust them not to have
sent it early. Now we explicitly track the depth in the channel while
waiting for the funding to confirm.
Changelog-Fixed: channeld: Enforce our own `minimum_depth` beyond just confirming
We use this in a couple of places, when we want to refer to a channel
by its `short_channel_id`, I'm moving this into a separate function
primarily to have a way to mark places where we do that.
`alias_local` is generated locally and sent to the peer so it knows
what we're calling the channel, while `alias_remote` is received by
the peer so we know what to include in routehints when generating
invoices.
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
More efficient to search a known peer than the whole set.
Also, move find_channel_by_id() from channel_control.c into channel.c
where we'd expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
We used to calculate it ourselves. Unfortunately this needs to
be done in several places, since new_channel() isn't used to fully
create a channel in the case of dual funding :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want it to keep the latest, so it can make its own error msgs without
asking us. This installs (but does not use!) the message handler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
