As connectd handles more packets itself, or diverts them to/from gossipd,
it's the only place we can implement the dev_disconnect logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This test started mostly failing (in non-DEVELOPER mode) after the
next patch, due to timing issues.
Handle both cases for now, and we'll add more enhancements later to
things we should be handling more consistently.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I also got an error under CI; it seems the sleep() was insufficient.
So try adding a sleep inside the check_coin_moves, which should cover
everyone.
```
acct_moves = acct_moves[number_moves:]
else:
> if not move_matches(m, acct_moves[0]):
E IndexError: list index out of range
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Once connectd is doing this, we can't close as soon as we send,
and in fact we can't do 'fail write' either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These would have to be done by connectd, not the local daemon, once it's
intermediating. Otherwise the remote peer won't see any change.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fire off a snapshot of current account balances (node wallet + every
'active' channel) after we've caught up to the chain tip for the *first*
time (in other words, on start).
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
If we initialized the payment, the fees are the entire fee-chain
(final hop amount - starting hop amount)
If it's a payment we routed, the fees are the diff between the
inbound htlc and the outbound (net gain by this routing)
Added to database so data persists nicely.
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
Get rid of the 'movement_idx', since we replay events now.
Since we're removing a field from the 'coin_movement' event emission, we
bump the version type.
Changelog-Updated: `coin_movements` events have been revamped and are now on version 2.
test_onchain_dust_out restarts a node, which produces duplicate events.
this is expected, but we need to de-duplicate the events stream to get
accurate results
The old model of coin movements attempted to compute fees etc and log
amounts, not utxos. This is not as robust, as multi-party opens and dual
funded channels make it hard to account for fees etc correctly.
Instead, we move towards a 'utxo' view of the onchain events. Every
event is either the creation or 'destruction' of a utxo. For cases where
the value of the utxo is not (fully) debited/credited to our account, we
also record the output_value. E.g. channel closings spend a utxo who's
entire value we may not own.
Since we're now tracking UTXOs onchain, we can now do more complex
assertions about the onchain footprint of them. The integration tests
have been updated to now use more 'chain aware' assertions about the
ending state.
Suggested-by: Rusty Russell
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Changed: Support hsm specific error error code in lightning-cli
1. Adds the missing DNS error massages so they can be handled by
connect_control.
2. Prepends a 'All addresses failed' to code 401 message, so we
always have at least some error message to the user.
Changelog-None
The last line of the testcase was checking on the wrong node l3
instead of l1. l3 didn't had the plugins configured that would
produce the log entry we were looking for not to be present.
Changelog-None
The idea is to have different default ports for different networks.
Current default port is `9735` for everything. Let's use it for
the mainnet and reuse the difference added to the default port
from `rpc_port` values in `bitcoin/chainstate.c`.
Testnet would be `19735` (adding rpc_port - 8332 = `10000`).
Signet would be `39735` (adding rpc_port - 8332 = `30000`).
Regtest would be `19846` (adding rpc_port - 8332 = `10111`).
With Vincenzo's kind pair-programming help over tmate.
Two other commits were squashed into this one so that bisecting
never ends up in half-baked state:
1. chainparams: Fix regtest default rpc_port
bitcoind -help says this:
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 8332, testnet:
18332, signet: 38332, regtest: 18443)
2. test_gossip: Default port for regtest
hex: 2607 is now .... (could be 4d86 but Elements uses another port)
dec: 9735 is now any port (could be 19846 ^^ but now is for any port)
The lines which were binding to default port were removed as the
default port is different on each network.
NOTE: Remember not to modify gossip_store tests which loads everything raw
including the checksums.
Changelog-Changed: If the port is unspecified, the default port is chosen according to used network similarly to Bitcoin Core.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make sure the gossip msg was sent, but the other node might not
have digested it yet:
```
# Check other node can parse these
> addresses = l2.rpc.listnodes(l1.info['id'])['nodes'][0]['addresses']
E KeyError: 'addresses'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
shutdown_subdaemons frees the channel and calls destroy_close_command_on_channel_destroy, see gdb:
0 destroy_close_command_on_channel_destroy (_=0x55db6ca38e18, cc=0x55db6ca43338) at lightningd/closing_control.c:94
1 0x000055db6a8181b5 in notify (ctx=0x55db6ca38df0, type=TAL_NOTIFY_FREE, info=0x55db6ca38e18, saved_errno=0) at ccan/ccan/tal/tal.c:237
2 0x000055db6a8186bb in del_tree (t=0x55db6ca38df0, orig=0x55db6ca38e18, saved_errno=0) at ccan/ccan/tal/tal.c:402
3 0x000055db6a818a47 in tal_free (ctx=0x55db6ca38e18) at ccan/ccan/tal/tal.c:486
4 0x000055db6a73fffa in shutdown_subdaemons (ld=0x55db6c8b4ca8) at lightningd/lightningd.c:543
5 0x000055db6a741098 in main (argc=21, argv=0x7ffffa3e8048) at lightningd/lightningd.c:1192
Before this PR, there was no io_loop after shutdown_subdaemons and client side raised a
general `Connection to RPC server lost.`
Now we test the more specific `Channel forgotten before proper close.`, which is good!
BTW, this test was added recently in PR #4599.
It runs 6 nodes: under valgrind this ends up consuming 5.3 GB RSS. By
stopping nodes between, we peak about 1G RSS.
Measured using:
(while true; do echo $(for i in 4 5 6; do ps uh | tr -s ' ' | cut -d\ -f$i | tally; done); sleep 5; done)&
(Which measures my other processes as well, but that's only about 100M).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ChangeLog-Added: With the `sqlite3://` scheme for `--wallet` option, you can now specify a second file path for real-time database backup by separating it from the main file path with a `:` character.
valgrind locally complains about the allocations in autodata leaking:
```
==138200== 16 bytes in 1 blocks are still reachable in loss record 1 of 2
==138200== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==138200== by 0x10D41A: autodata_register_ (autodata.c:20)
==138200== by 0x10E7B8: register_autotype_type_to_string (type_to_string.h:79)
==138200== by 0x10F5CA: register_one_type_to_string0 (block.c:259)
==138200== by 0x19734C: __libc_csu_init (in /home/rusty/devel/cvs/lightning/common/test/run-route-specific)
==138200== by 0x4A3D03F: (below main) (libc-start.c:264)
==138200==
==138200== 176 bytes in 1 blocks are still reachable in loss record 2 of 2
==138200== at 0x483DFAF: realloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==138200== by 0x10D472: autodata_register_ (autodata.c:26)
==138200== by 0x122D37: register_autotype_type_to_string (type_to_string.h:79)
==138200== by 0x122F1F: register_one_type_to_string0 (node_id.c:50)
==138200== by 0x19734C: __libc_csu_init (in /home/rusty/devel/cvs/lightning/common/test/run-route-specific)
==138200== by 0x4A3D03F: (below main) (libc-start.c:264)
==138200==
make: *** [Makefile:638: unittest/common/test/run-route-specific] Error 7
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we forget a channel, we can get upset when we get an update about it:
```
2021-11-04T00:35:43.8242370Z lightningd-3: 2021-11-04T00:29:22.073Z DEBUG gossipd: Pruning channel 103x1x1 from network view (ages 61 and 22s)
...
2021-11-04T00:35:43.8263502Z lightningd-3: 2021-11-04T00:29:22.509Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 103x1x1/0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This loads up 20MB of plugins temporarily; we seem to be getting OOM
killed under CI and I wonder if this is contributing.
Doesn't significantly reduce runtime here, but I have lots of memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CI seems to be OOM killing us; 5 may be too many under valgrind.
VALGRIND=1 pytest tests/test_pay.py::test_fetchinvoice
Before:
1 passed in 199.33s (0:03:19)
After:
1 passed in 177.91s (0:02:57)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This surprised me, since the CHANGELOG for [0.8.2] said:
We now announce multiple addresses of the same type, if given. ([3609](https://github.com/ElementsProject/lightning/pull/3609))
But it lied!
Changelog-Fixed: We really do allow providing multiple addresses of the same type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
October was the date Torv2 is no longer supported by the Tor Project;
it will probably not work at all by next release, so we should remove
it now even though it's not quite the 6 months we prefer for
deprecation cycles.
I still see 110 nodes advertizing Torv2 (vs 10,292 Torv3); we still
parse and display it, we just don't advertize or connect to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to require that fundchannel_complete() take a PSBT, where it
does sanity checks to avoid this error, making this a difficult mistake
to make.
Is it time to remove this functionality anyway? @cdecker?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fails liquid-regtest otherwise; liquid tends to hit the dust limit
earlier than non-liquid tx, and MPP exacerbates this by divvying up
payments into dusty bits then attempting to shove them through the same
channel, hitting the dust max. The MPP then fails as not all the parts
were able to arrive at their destination.
Let's make this a softer launch by just warning on the channel til the
feerates go back down.
You can also 'fix' this by upping your dust limit with
the `max-dust-htlc-exposure-msat` config.
Fixes#4482Fixes#4481
Changelog-Added: pay: Payment attempts are now grouped by the pay command that initiated them
Changelog-Fixed: pay: `listpays` returns payments orderd by their creation date
Changelog-Fixed: pay: `listpays` no longer groups attempts from multiple attempts to pay an invoice
If it reconnects by itself, it will get a warning message:
```
lightningd-2: 2021-10-08T01:40:42.446Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#3: billboard: Sent reestablish, waiting for theirs
lightningd-2: 2021-10-08T01:40:42.446Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#3: peer_in WIRE_ERROR
lightningd-2: 2021-10-08T01:40:42.447Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#3: billboard perm: Received error channel 0a6220a3e904d17e72b5c3499928dc8a65720063c6395c999a129a0ff0b06afb: Forcibly closed by `close` command timeout
lightningd-2: 2021-10-08T01:40:42.448Z INFO 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#3: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: error channel 0a6220a3e904d17e72b5c3499928dc8a65720063c6395c999a129a0ff0b06afb: Forcibly closed by `close` command timeout
```
And this will make CI complain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's probably not worth fixing for the other daemons.
Changelog-Changed: JSON-RPC: `ping` now only works if we have a channel with the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Send a ping every 15-45 seconds. If we try to send another one and we
haven't got a reply, hang up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: Send regular pings to detect dead connections (particularly for Tor).
To minimize the diffs, we #if 0 the code. We'll reenable it once
channeld is ready.
We also temporarily disable the ping tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
We always allocate a new `struct command` when we get a full JSON
object from stdin:
b2df01dc73/plugins/libplugin.c (L1229-L1233)
If it happens to be a notification, we pass the `struct command` to
the handler, and not free it ourselves:
b2df01dc73/plugins/libplugin.c (L1270-L1275)
There are only nine points in `plugins/libplugin.c` where we `tal_free`
anything, and only one of them frees a `struct command`:
b2df01dc73/plugins/libplugin.c (L224-L234)
The above function `command_complete` is not appropriate for
notification handlers; the above function sends out a response
to our stdout, which a notification handler should not do.
However, as-is, it does mean that notification handling leaks
`struct command` objects, which can be problematic if we ever
have future built-in plugins which are significantly more
dependent on notifications.
This commit changes notification handlers to return
`struct command_result *`, because possibly in the future
notification handlers may want to perform `send_outreq`, so we
might as well use our standard convention for callbacks, and
to encourage future developers to check how to properly
terminate notification handlers (and free up the
`struct command`).
We also now provide a `notification_handled` function which a
notification handler must eventually call, as well as a
`notification_handler_pending` which is just a snowclone of
`command_still_pending`.
It was incredibly flaky due to the potential for l2 announcing the
channel before l1 could get to it, thus suppressing the outgoing
announcement which we were looking for. This now checks either
direction.
Before this fix the failure rate was 24% (out of 100 runs), afterwards
it's 0%.
Changelog-None
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
We can miss it in both logs, so wait for it instead:
```
2021-09-22T07:25:59.1582950Z > l3.rpc.addgossip(ann.split()[3])
2021-09-22T07:25:59.1583911Z E AttributeError: 'NoneType' object has no attribute 'split'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Support to listpays the status parameter to filter the payments by status.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
sendonionmessage is going to be the new one, and do much *less*.
As this is an internal experimental-only API, no deprecation cycle
required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We never tested that we can correctly unwrap on the next step after
unblinding: it failed because we mangled the onion in place! Fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows cmdline users to have more idea what's going on.
Inspired-by: https://github.com/ElementsProject/lightning/issues/4777
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `close` now notifies about the feeranges each side uses.
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
This is now allowed for anchors (as per https://github.com/lightningnetwork/lightning-rfc/pull/847).
We need to play with feerates, since we don't put a discount on anchor
commitments yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes the new bolt11 test vectors, and also removes the
requirement that HTLCs be less than 2^32 msat. We keep that for now
because Electrum enforced it on receive: in two releases we will stop
that too.
So no longer warn about needing mpp in that case either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Protocol: No longer restrict HTLCs to
We weren't actually getting the last log out; this does that.
We have to fix test_bitcoin_failure which now notices the BROKEN
log message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: libplugin: Fatal error messages from plugin_exit() now logged in lightningd.
Changelog-Changed: Change order parameters in the listforwards command
Changelog-Deprecated: Change order of the status parameter in the listforwards rpc command.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
After some discussion with @shesek, and my own usage, we agreed that
a more comprehensive interface, which explicitly supports grouping,
is desirable.
Thus keys are now arrays, with the semantic that a key is either a
parent or has a value, never both.
For convenience in the JSON schema, we always return them as arrays,
though we accept simple strings as arguments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We add a generation counter, and allow update or del conditional
on a given generation.
Formalizes error codes, too, since we have more now.
Suggested-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The function is already provided in
contrib/pyln-testing/pyln/testing/utils.py (which is also
imported in this module), so there is no need to define it
a second time.
We actually were waiting for l3 to disconnect, not l2.
But in general we should be looking for status rather than grovelling
in the logs where possible, so I changed all those.
```
2021-08-17T04:40:34.9015538Z # l2 leases a channel from l3
2021-08-17T04:40:34.9016520Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9017570Z rates = l2.rpc.dev_queryrates(l3.info['id'], amount, amount)
2021-08-17T04:40:34.9018724Z l3.daemon.wait_for_log('disconnect')
2021-08-17T04:40:34.9019851Z l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
2021-08-17T04:40:34.9021467Z l2.rpc.fundchannel(l3.info['id'], amount, request_amt=amount,
2021-08-17T04:40:34.9022865Z feerate='{}perkw'.format(feerate), minconf=0,
2021-08-17T04:40:34.9024000Z > compact_lease=rates['compact_lease'])
...
2021-08-17T04:40:34.9103422Z > raise RpcError(method, payload, resp['error'])
2021-08-17T04:40:34.9106829Z E pyln.client.lightning.RpcError: RPC call failed: method: fundchannel, payload: {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'amount': 500000, 'feerate': '2000perkw', 'announce': True, 'minconf': 0, 'request_amt': 500000, 'compact_lease': '029a00640064000000644c4b40'}, error: {'code': 400, 'message': 'Unable to connect, no address known for peer', 'data': {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'method': 'connect'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fail waiting for 'Resolved OUR_UNILATERAL/DELAYED_OUTPUT_TO_US by our proposal OUR_DELAYED_RETURN_TO_WALLET'
because we close *two* channels, but only wait for one transaction before mining a block.
This means we might only have one, and we immediately mine the next wait_for_mempool=1,
so the OUR_DELAYED_RETURN_TO_WALLET isn't mined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If l3 is too slow, it can get channel_announcement after channel
is closed, so it gets upset at the node_announcement which follows:
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Updated pending announce with update 103x1x1/1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: channel_announcement: no unspent txout 103x1x1
022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_NODE_ANNOUNCEMENT before announcement 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This actually caused the flake in test_funding_reorg_private, where
l1 and l2 might not mark the original channel disabled. In fact, they
should *remove* it as it gets reorged out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It subsumes `decodepay`, and it's nicer if people can just assume it's
available at all times.
Changelog-Added: JSON-RPC: `decode` now available without `experimental-offers`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pointed out by @fiatjaf, and indeed it happened to me as well; a peer with
a high feerate reconnects and sends a similar (but now ludicrous) feerate,
and we get upset:
```
$ lightning-cli listpeers 039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36
{
"peers": [
{
"id": "039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36",
"connected": false,
"channels": [
{
"state": "CHANNELD_NORMAL",
"scratch_txid": "d796aa9c44920cc7169cdb61e36437bf180cedaec44103a69591ce2baac9b1d9",
"last_tx_fee": "14329000msat",
"last_tx_fee_msat": "14329000msat",
"feerate": {
"perkw": 19791,
"perkb": 79164
},
```
Then in the logs:
```
2021-07-23T19:34:56.227Z DEBUG 039c73f53daad1050a6a72afb5353a2152f3152ee17168cd0ab28c2cb3e0050e36-channeld-chan#39381: billboard perm: update_fee 17055 outside range 253-7210
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, Shesek tried an empty offer description, and the
resulting signature didn't match since it was omitted entirely from
the bolt12 string!
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't automatically *reject* an invoice which asks for a different
msat than we specified (caller may!), but we don't bother noting it
unless it is different.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You could have quantity_min of 0, which makes no sense; spec has been
updated, so quote and enforce that.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Documentation for the funderupdate command on the funder plugin.
Realized we were missing the "leases_only" in the output; also adds
'_msat' to msat denominated outputs so they're parsed correctly by our
python bindings (also matches our naming conventions)
Changelog-EXPERIMENTAL: funder: `funderupdate` command to view and update params for contributing our wallet funds to v2 channel openings. Provides params for enabling `option_will_fund`.
Since we now use 'compact_lease' to gate an open (if the rates have
changed, we fail), we no longer need to rely on query rates for figuring
things out, so we make it dev-only.
Changelog-Changed: JSON-API: queryrates is now developer only
If there's no plugin currently in place, we simply won't return any
funding at all, in which case we'd expect them to handle however
they want. (our implementation would fail the open, as we only accept
opens that have at least as much as we've requested provided)
Useful for parsing a passed in feerate before calling lightningd with
it, e.g. when you need to know what the feerate is for a fundpsbt before
calling fundpsbt
Changelog-Added: JSON-RPC: new command `parsefeerate` which takes a feerate string and returns the calculated perkw/perkb
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This is in preparation for removing support (next release?).
Changelog-Changed: Protocol: We now assume nodes support TLV onions (non-legacy) unless we have a node_announcement which says they don't.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In fact, we make it compulsory, which means if you don't understand it
you'll hang up on us!
Add some logging for that in future.
Changelog-Changed: Protocol: All new invoices require a payment_secret (i.e. modern TLV format onion)
Changelog-Changed: Protocol: We can no longer connect to peers which don't support `payment_secret`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
