I couldn't figure out why my new SQL query was returning 0 rows,
and it was because we were ignoring errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fun story. We're changing onchaind to hand txs to us, and we will
construct them and do the broadcast for it. lightningd tells onchaind
the witness it used (with flags to indicate which fields were
signatures so should be ignored) so onchaind can recognize the tx
when/if it is mined.
And when onchaind was waiting for a CLTV delay, it wouldn't tell
lightningd yet, but wait until the parent was sufficiently deep
But this caused bugs!
In particular, on replay, onchaind would see transactions which it
hasn't sent yet. This was not a problem before, as onchaind had
created the tx, even if it hadn't told lightningd to broadcast it, so
recognized the variant when it came in. When we're relying on
lightningd to tell us what the tx will look like, this doesn't work
any more.
The cause of this is that we fire off txowatches ("this output was
spent!") while we process blocks, and only fire off txwatches ("this
tx increased depth") once all the current blocks are processed. Often
this didn't matter, since we replay messages to onchaind from the
database, *but* we trim the last few blocks on restart (or, if there's
a small reorg while we're stopped), and we can hit this misordering.
Changing our topology code to only ever process one block at a time
would be a solution, but slows down catchup (and tests, where we often
mine a run of blocks).
So, this seems like a premature optimization, but it's really
required! And in future, lightningd can use this knowledge of pending
transactions to combine them in more clever ways.
Note that if a tx is valid at block N, we broadcast it once we see
block N-1, to get it in the mempool for block N.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment only lightingd needs it, and this avoids missing any
places where we do bip32 derivation.
This uses a hsm capability to mean we're backwards compatible with older
hsmds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now always double-check bitcoin addresses are correct (no memory errors!) before issuing them.
It's needed as the db and wallet is being set up (db migrations), so
it's simpler this way to always use ld->bip32_base for the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Importantly, adds the version number at the *front* to help future
parsing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fix-hsm-check-pubkey.patch':
fixup! hsmd: capability addition: ability to check pubkeys.
It's not likely but possible that the node's settings will shift btw a
start and an RBF; we persist the setting to the database so we don't
lose it.
Right now holding onto it forever is kind of extra but maybe we'll
reuse the setting for splices? idk.
Should this be a channel type??
technically we don't need this info after the channel opens, but for any
subsequent RBF (and maybe splice?) we need to remember what the
open/accept peer signaled
We need to be able to only use non-wrapped inputs for v2/interactive tx
protocol.
Changelog-Added: JSONRPC: `fundpsbt` option `nonwrapped` filters out p2sh wrapped inputs
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're soon going to call json_add_unsaved_channel and
json_add_uncommitted_channel from a new place, where we want the peer
state directly included.
Based on patch by @vincenzopalazzo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This current spec is not strict enough: we might complain that the
next peer is not connected, for example, which leaks information.
So return WIRE_INVALID_ONION_BLINDING even if we're the first hop
on the path, to be safe.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise what the hook sees is actually a lie, and if it sets it
we might override it.
The side effect is that we add an explicit "forward_to" field, and
allow hooks to override it. This lets a *hook* control channel
choice explicitly.
Changelod-Added: Plugins: `htlc_accepted_hook` return can specify what channel to forward htlc to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows GDB to print values, but also allows us to use them in
'case' statements. This wasn't allowed before because they're not
constant terms.
This also made it clear there's a clash between two error codes,
so move one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: Error code from bcli plugin changed from 400 to 500.
First, merge the _ahf_ and non-ahf interfaces.
Second, remove the always-NULL txs->cmd field.
Then, add optional id_prefix for bitcoind_sendrawx, so if it's
triggered by a command (e.g. "withdraw") it's shown correctly in logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is cleaner because, the `remote_addr` and `discovered_ip` are
related but two different things.
Within connectd and lightningd we use the peers `remote_addr` feature
to validate (and guess a port) to be used for IP discovery.
Also when a peer reports us a `remote_addr`, this is given to the plugin API
via the `peer_connected` hook. The network port here is not modified for
godd reason! This can be used i.e. to detect if we are behind a NAT.
But once lightningd figures enough peers report the same `remote_addr`,
it sets the port to the selected network and tells gossipd to use that for
`node_announcement` updates.
Hence, within gossipd, there is no (should not be) `remote_addr`.
Changelog-None
Because it used internal routines, it didn't pass operations through the
db hook! So make it use the generic routines, with the twist that they
are not translated.
And when we use this in a migration hook, we're actually in a
transaction.
This, in turn, introduces an issue: we need to be outside a transaction
to "PRAGMA foreign_keys = OFF", but completing the transaction when
there is a db hook actually enters the io loop, freeing the tmpctx!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We annotate them with UNNEEDED, which is legal but weird, but it
makes gcc (at least 11.2.0) complain about shadowing:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106424
I simply removed the names.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
Connectd already does this when we *receive* an error or warning, but
now do it on send. This causes some slight behavior change: we don't
disconnect when we close a channel, for example (our behaviour here
has been inconsistent across versions, depending on the code).
When connectd is told to disconnect, it now does so immediately, and
doesn't wait for subds to drain etc. That simplifies the manual
disconnect case, which now cleans up as it would from any other
disconnection when connectd says it's disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to detect when lightningd hasn't seen our latest
disconnect/reconnect; in particular, we would hit the following pattern:
1. lightningd says to connect a subd.
2. connectd disconnects and reconnects.
3. connectd reads message, connects subd.
4. lightningd reads disconnect and reconnect, sends msg to connect to subd again.
5. connectd asserts because subd is alreacy connected.
This way connectd can tell if lightningd is talking about the previous
connection, and ignoere it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch:
1. connectd says it's connected (peer_connected)
2. we tell connectd we want to talk about each channel (peer_make_active)
3. connectd gives us an fd for each channel, and we connect it to a subd (peer_active)
4. OR, connectd says it sent something about a channel we didn't tell it about, with an fd (peer_active)
Now:
1. connectd says it's connected (peer_connected)
2. we start all appropriate subds and tell connectd to what channels/fds (peer_connect_subd).
3. if connectd says it sent something about a channel we didn't tell it about, we either tell
it to hang up (peer_final_msg), or connect a new opening daemon (peer_connect_subd).
This is the minimal-size patch, which is why we create socket pairs in
so many places to use the existing functions. Many cleanups are
possible, since the new flow is so simple.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's directly a product of "does it have a current owner subdaemon"
and "does that subdaemon talk to peers", so create a helper function
which just evaluates that instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`alias_local` is generated locally and sent to the peer so it knows
what we're calling the channel, while `alias_remote` is received by
the peer so we know what to include in routehints when generating
invoices.
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
Regenerate from current BOLTS via `make extract-bolt-csv`
1. The remote_addr field was added manually into peer_wire.csv: this
needs to be a patch otherwise it vanishes on regen.
2. We never brought into the channel_disabled fields, because it was
too much hassle (we never actually generate this!). Do it now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
