We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
We call out to connectd to activate the peer, and while we do that,
channel->owner is NULL. A better pattern would be to set up the unsaved
channel once connectd has given us the peer, but this works for now.
Fixes: #5204
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this (send warnings) in almost all cases anyway, so mainly this
is a textual update, but there are some changes:
1. Send ERROR not WARNING if they send a malformed commitment secret.
2. Send WARNING not ERROR if they get the shutdown_scriptpubkey wrong (vs upfront)
3. Send WARNING not ERROR if they send a bad shutdown_scriptpubkey (e.g. p2pkh in future)
4. Rename some vars 'err' to 'warn' to make it clear we send a warning.
This means test_option_upfront_shutdown_script can be made reliable, too,
and it now warns and doesn't automatically close channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
We get some memleak reports because ld owns the subd, but once
the peer/channel is freed, there's no reference for the brief time
until the subd exits.
This happens for both opening and closingd. For openingd, the
peer owns it, for others (including dualopend) the channel owns it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
This means lightningd needs to create the temporary one and tell it to
openingd/dualopend, rather than the other way around.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
We used to calculate it ourselves. Unfortunately this needs to
be done in several places, since new_channel() isn't used to fully
create a channel in the case of dual funding :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Things allocated by libwally all get the tal_name "wally_tal",
which cost me a few hours trying to find a leak.
In the case where we're making one of the allocations the parent
of the others (e.g. a wally_psbt), we can do better: supply a name
for the tal_wally_end().
So I add a new tal_wally_end_onto() which does the standard
tal_steal() trick, and also changes the (typechecked!) name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
Once we send funding_locked, gossipd could start seeing channel_updates
from the peer (which get sent so we can use the channel in routehints
even before it's announcable).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dualopend doesn't always listen to lightningd messages, so it would
sometimes hang at the end of tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now use 'compact_lease' to gate an open (if the rates have
changed, we fail), we no longer need to rely on query rates for figuring
things out, so we make it dev-only.
Changelog-Changed: JSON-API: queryrates is now developer only
We need to know what the lease we're expecting is. To do this
we pass around the hex encoded portion of the wire format.
We can use this passed in expected lease rates to confirm that the peer
is, in fact, using the same rates as what we have currently.
Changelog-Added: JSON-RPC: fundchannel, multifundchannel, and openchannel_init now accept a 'compact_lease' for any requested funds
When a request comes through, we forward it over to the funder who
uses the currently set policy to figure out how to handle it.
Includes small update to the policy engine which decides whether or not
to fund a request.
Changelog-Experimental: Plugins: `openchannel2` hook now includes optional fields for a channel lease request
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This supports reestablish on a closed channel: we tell channeld to
respond to the reestablish message appropriately, then close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
If the peer is offline when we see the funding txid, we don't actually
update the channel's info. Here, we move it up to where the scid is set,
so that we always update the channel's funding_txid to the correct
(mined) information.
