By default, we won't close a channel that we leased to a peer.
You can override this with the `force_lease_closed` flag.
Changelog-Added: JSON-RPC: close now has parameter to force close a leased channel (option_will_fund)
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This has been reported several times on regtest, most recently by Gijs
van Dam. It turns out approx_max_feerate() was returning 0 in some
corner cases: we should *not* be using that value (as shown, it's
overly conservative) except as a ceiling on fee *increases*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: don't ever send 0 fee_updates (regtest bug).
This lets us transition (with a few supporting changes) to closingd,
which will happily let them mutual close with us.
We already handle the case where this mutual close is redundant (for
packet loss), so this is easy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We will now reestablish and negotiate mutual close on channels we've already closed (great if peer has lost their database).
This supports reestablish on a closed channel: we tell channeld to
respond to the reestablish message appropriately, then close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Let the callers do that (only channeld needs to do this).
We temporarily send an error on unknown reestablish in openingd, as
this mimic previous behavior and avoids breaking tests (it does leave
a BROKEN message in the logs though, so
test_funding_external_wallet_corners needs to ignore that for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't actually set desired_type yet, but this handles it.
Changelog-EXPERIMENTAL: Protocol: we can now upgrade old channels to `option_static_remotekey` from https://github.com/lightningnetwork/lightning-rfc/pull/868
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For quiescence, we can't have sent any updates at all.
But for upgrades on reconnection, we may have already added
uncommitted HTLCs for retransmission, but they don't count towards
"are we quiesced" since they're not sent yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes anysegwit and the updated HTLC tiebreak test vector. It
also adds explicit wording for invalid per_commitment_secret (which
nicely matches our code already!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This may have made our feestates fully resolved, so we can send
update_fee again. Without this fix our tests sometimes timeout.
Also add debugging so we can see when we suppressed a feechange.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are several reports of desynchronization with LND here; a simple
approach is to only have one feerate change in flight at any time.
Even if this turns out to be our fault, it's been a historic area of
confusion, so this restriction seems reasonable.
Changelog-Fixed: Protocol: Don't create more than one feerate change at a time, as this seems to desync with LND.
Fixes: #4152
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
Looks like #4394 treated a symptom but not the root cause. We were
actually sending the message framed with the WIRE_CUSTOMMSG_OUT and
the length prefix over the encrypted connection to the peer. It just
happened to be a valid custommsg...
This fixes the issue, and this time I made sure we actually send the
raw message over the wire. However for backward compatibility we
needed to imitate the faulty behavior which is 90% of this patch :-)
Changelog-Fixed: plugin: `dev-sendcustommsg` included the type and length prefix when sending a message.
We move over to the new "warning" paradigm, instead of using
an "rbf_fail" message.
Every failure is either a warning or an error; on warnings we
hang up and reconnect later, effectively resetting the state.
And make all the callers choose which one. In general, I prefer warn,
which lets them reconnect and try again, however some places are either
stated that they must be errors in the spec itself, or in openingd
where we abandon the channel when we close the connection anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we now send warning messages and close the connection, except on unrecoverable errors.
This takes from the draft spec at https://github.com/lightningnetwork/lightning-rfc/pull/834
Note that if this draft does not get included, the peer will simply
ignore the warning message (we always close the connection afterwards
anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now report the new (draft) warning message.
Don't include exp directly, use an ifdef in common/bolt12
(like we do for peer and onion wiregen files).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a case where a dropped funding_locked will result in the peer
moving onto channeld, while we stay in dualopend. As we haven't
received their funding_locked, we retransmit tx_sigs, which channeld
will need to handle.
With the patch the peer drops it on the floor; the peer will resend
funding_locked on reconnect, which will correctly advance us to
channeld and CHANNELD_NORMAL
We used this for dual funded opens, to track the receipt of signatures.
We're moving all of this over to dualopend now, however, so we no longer
need the PSBT in channeld.
The previous onion_message code required a confirmed, not-shutting-down
channel, not just a connection. That's overkill; plus before widespread
adoption we will want to connect directly as a last resort.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Still asserts that it's the standard size, but makes it a dynamic
member. For simpliciy, changes the parse_onionpacket API (it must be
a tal object now, so we might as well allocate it here to catch all
the callers).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
While debugging a hanging channel with a user I noticed that they
called `close` on a channel, resulting in the channel showing
`CHANNELD_SHUTTING_DOWN`, but the billboard seemed to show the
information the wrong way around:
```json
{
"peers": [
{
"connected": true,
// ...
"channels": [
{
"state": "CHANNELD_SHUTTING_DOWN",
// ...
"status": [
"CHANNELD_SHUTTING_DOWN:Reconnected, and reestablished.",
"CHANNELD_SHUTTING_DOWN:Funding transaction locked. They need our announcement signatures. They've sent shutdown, waiting for ours"
],
// ...
}
]
}
]
}
```
Aside from the hung channel, the switch in direction of the status
seemed weird. Checking the billboard code seems to have the status
switched as well:
ff8830876d/channeld/channeld.c (L223-L226)
We set `shutdown_sent[LOCAL]` when we send the shutdown:
ff8830876d/channeld/channeld.c (L823-L839)
And we set `shutdown_sent[REMOTE]` when we receive the shutdown:
ff8830876d/channeld/channeld.c (L1730-L1781)
So I think the billboard code just needs to be switched around.
Changelog-Fixed: JSON-RPC: The status of the shutdown meesages being exchanged is now displayed correctly.
